2AOKB-A2543PowerWave Magnetic 2-in-1 Stand Lite

For FAQs and more information, please visit: anker.com/support @Anker Deutschland @Anker Japan @Anker Product Number: A2543 51005002866 V01 English 01 Deutsch05 Español07 Français10 Italiano15 Português17 Pусский 20 Türk22 日本語 25 한국어 27 简体中文 29 繁體中文 31 ية ِ ب َ ر َ لع 33 ית ִ בר ִ ע 36 0102 EN LED IndicatorStatus Solid white for 4 seconds, then turns off Connected to power Left LED indicator: Solid whiteCharging your phone Right LED indicator: Solid whiteCharging your wireless earbuds Flashing • Metal objects detected • Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter T Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. •Avoid dropping. •Do not disassemble. •Do not expose to liquids. •For the safest and fastest charge, use original or certified cables. •This product is suitable for moderate climates only. •The maximum ambient temperature during use of this product must not exceed 40°C. •Open flame sources, such as candles, must not be placed on this product. •Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. • You cannot charge your device wirelessly when using an ultra-thick (> 4 mm) protective phone case or a case with a pop socket. • This wireless charger only supports the protective cases that match the magnetic structure of the iPhone. • Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. • Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. • Wireless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. • High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 35°C / 95°F. 0304 Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. Product Name: PowerWave Magnetic 2-in-1 Stand Lite Model: A2543 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Statement This device complies with RSS-216 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. RSS-Gen Issue 5 March 2019 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF exposure statement: The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. This digital apparatus complies with CAN ICES-003(B)/NMB-003(B). Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2543 is in compliance with Directives 2014/53/EU & 2011/65/ EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/ GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2543 is in compl…

Text truncated - open the document above for the full version.

FCCID:2AOKB-A2543

100.0 mm 100.0 m m 11.2 m m 61.0 mm 61.0 m m 149.5 m m 10.3 mm 镭雕 丝印 PT 877C 丝印 PT 5C A2543 设计：hongbin 日期：20210508 5.5mm 20mm 55mm 16mm 居中对齐 出线方向 居中对齐 居中对齐

FCCID:2AOKB-A2543

AnkerInnovationsLimited DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:A2543 FCCID:2AOKB-A2543 fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsfor internal antennatype(s) describedbelow: ANT1 ModelNo.ofantenna:N/A Typeofantenna:InductiveloopcoilAntenna Gainoftheantenna:0dBi Frequencyrange:111.1-205KHz ANT2 ModelNo.ofantenna:N/A Typeofantenna:InductiveloopcoilAntenna Gainoftheantenna:0dBi Frequencyrange:111.1-205KHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname:AnkerInnovationsLimited Address:Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon, HongKong City: Kowloon ZIP/Postalcode: N/A Country: HongKong Place: KowloonDate:7/26/2021 Signature: version01

ReportNo.:18220WC10123202FCCID:2AOKB-A2543Page1of12 Code:AB-RF-05-a FCCTESTREPORT ClientName:AnkerInnovationsLimited Address: Room1318-19,HollywoodPlaza,610Nathan Road,Mongkok,Kowloon,Hongkong ProductName:PowerWaveMagnetic2-in-1StandLite Date:Jul.26,2021 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC10123202FCCID:2AOKB-A2543Page2of12 Code:AB-RF-05-a Contents 1.GeneralInformation ............................................................................................................................................... 4 1.1.ClientInformation ....................................................................................................................................... 4 1.2.DescriptionofDevice(EUT) ..................................................................................................................... 4 1.3.AuxiliaryEquipmentUsedDuringTest ................................................................................................... 5 1.4.TestEquipmentList .................................................................................................................................... 5 1.5.MeasurementUncertainty ......................................................................................................................... 5 1.6.DescriptionofTestFacility ........................................................................................................................ 6 2.MeasurementandResult ..................................................................................................................................... 7 2.1.Requirements .............................................................................................................................................. 7 2.2.TestSetup .................................................................................................................................................... 8 2.3.TestProcedure ............................................................................................................................................ 8 2.4.TestResult ................................................................................................................................................... 8 APPENDIXI--TESTSETUPPHOTOGRAPH ................................................................................................... 12 ReportNo.:18220WC10123202FCCID:2AOKB-A2543Page3of12 Code:AB-RF-05-a TESTREPORT Applicant:AnkerInnovationsLimited Manufacturer:AnkerInnovationsLimited ProductName:PowerWaveMagnetic2-in-1StandLite ModelNo.:A2543 TradeMark: ANKER Rating(s): Input:DC5V/3A,DC9V/2A,DC12V/2A Wirelessoutput1:5W,7.5W,10W Wirelessoutput2:5W Totalpower:15WMax TestStandard(s): FCCPart1.1310,1.1307(b) TestMethod(s): KDB680106D01RFExposureWirelessChargingAppsv03 ThedevicedescribedaboveistestedbyShenzhenAnbotekComplianceLaboratoryLimitedto determinethemaximumemissionlevelsemanatingfromthedeviceandtheseverelevelsofthedevice canendureanditsperformancecriterion.Themeasurementresultsarecontainedinthistestreportand ShenzhenAnbotekComplianceLaboratoryLimitedisassumedfullofresponsibilityfortheaccuracy andcompletenessofthesemeasurements.Also,thisreportshowsthattheEUT(EquipmentUnder Test)istechnicallycompliantwiththeFCCPart1.1307&KDB680106D01requirements. Thisreportappliestoabovetestedsampleonlyandshallnotbereproducedinpartwithoutwritten approvalofShenzhenAnbotekComplianceLaboratoryLimited. DateofReceipt Jun.09,2021 DateofTest Jun.09~Jul.15,2021 PreparedBy (EllaLiang) Approved&AuthorizedSigner (KingkongJin) ReportNo.:18220WC10123202FCCID:2AOKB-A2543Page4of12 Code:AB-RF-05-a 1.GeneralInformation 1.1.ClientInformation Applicant:AnkerInnovationsLimited Address: Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon, Hongkong Manufacturer:AnkerInnovationsLimited Address: Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon, Hongkong 1.2.DescriptionofDevice(EUT) ProductName:PowerWaveMagnetic2-in-1StandLite ModelNo.:A2543 TradeMark:ANKER TestPowerSupply: AC120V,60Hzforadapter/AC240V,60Hzforadapter TestSampleNo.: 1-2-1(NormalSample),1-2-2(EngineeringSample) Product Description : OperationFrequency:111.1-205KHz ModulationType:FSK AntennaType:InductiveloopcoilAntenna AntennaGain(Peak):0dBi Remark:1)Foramoredetailedfeaturesdescription,pleaserefertothemanufacturer’sspecifications ortheUser’sManual. ReportNo.:18220WC10123202FCCID:2AOKB-A2543Page5of12 Code:AB-RF-05-a 1.3.AuxiliaryEquipmentUsedDuringTest Wirelesscharging load :Manufacturer:GopodGroupHoldingLimited. M/N:DTE324EM Power:5W/7.5W/10W/15W LastCal.:Oct.30,2020 Cal.Interval:1Year AppleAirPods:M/N:AirPodsPro 1.4.TestEquipmentList ItemEquipmentManufacturerModelNo.SerialNo.LastCal.Cal.Interval 1MagneticfieldmeterNARDAELT-400423623Dec.24,20183Year 2E-FieldProbeNardaEF0391Q15221Nov.17,20203Year 3H-FieldProbeNardaHF3061Q15835Nov.17,20203Year 1.5.MeasurementUncertainty RadiationUncertainty: Ur=3.9dB(Horizontal) Ur=3.8dB(Vertical) ConductionUncertainty: Uc=3.4dB ReportNo.:18220WC10123202FCCID:2AOKB-A2543Page6of12 Code:AB-RF-05-a 1.6.DescriptionofTestFacility Thetestfacilityisrecognized,certified,oraccreditedbythefollowingorganizations: FCC-RegistrationNo.:184111 ShenzhenAnbotekComplianceLaboratoryLimited,EMCLaboratoryhasbeenregistedandfully describedinareportfiledwiththe(FCC)FederalCommunicationsCommission.Theacceptanceletter fromtheFCCismaintainedinourfiles.RegistrationNo.184111,September30,2020. ISED-RegistrationNo.:8058A ShenzhenAnbotekComplianceLaboratoryLimited,EMCLaboratoryhasbeenregisteredandfully describedinareportfiledwiththe(ISED)Innovation,ScienceandEconomicDevelopmentCanada.The acceptanceletterfromtheISEDismaintainedinourfiles.Registration8058A,September30,2020. TestLocation ShenzhenAnbotekComplianceLaboratoryLimited. 1/F,BuildingD,SogoodScienceandTechnologyPark,Sanweicommunity,HangchengStreet,Bao'an District,Shenzhen,Guangdong,China.518102 ReportNo.:18220WC10123202FCCID:2AOKB-A2543Page7of12 Code:AB-RF-05-a 2.Measurementan…

Text truncated - open the document above for the full version.

ReportNo.:18220WC10123201FCCID:2AOKB-A2543Page1of22 Code:AB-RF-05-a FCCTESTREPORT ClientName:AnkerInnovationsLimited Address: Room1318-19,HollywoodPlaza,610Nathan Road,Mongkok,Kowloon,Hongkong ProductName:PowerWaveMagnetic2-in-1StandLite Date:Jul.26,2021 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:18220WC10123201FCCID:2AOKB-A2543Page2of22 Code:AB-RF-05-a Contents 1.GeneralInformation ............................................................................................................................................... 4 1.1.ClientInformation ....................................................................................................................................... 4 1.2.DescriptionofDevice(EUT) ..................................................................................................................... 4 1.3.AuxiliaryEquipmentUsedDuringTest ................................................................................................... 5 1.4.DescriptionofTestModes ........................................................................................................................ 5 1.5.DescriptionOfTestSetup ......................................................................................................................... 6 1.6.TestEquipmentList .................................................................................................................................... 7 1.7.MeasurementUncertainty ......................................................................................................................... 8 1.8.DescriptionofTestFacility ........................................................................................................................ 8 2.SummaryofTestResults ..................................................................................................................................... 9 3.ConductedEmissionTest ................................................................................................................................... 10 3.1.TestStandardandLimit .......................................................................................................................... 10 3.2.TestSetup .................................................................................................................................................. 10 3.3.TestProcedure .......................................................................................................................................... 10 3.4.TestData .................................................................................................................................................... 10 4.RadiationSpuriousEmission ............................................................................................................................. 15 4.1.TestStandardandLimit .......................................................................................................................... 15 4.2.TestSetup .................................................................................................................................................. 15 4.3.TestProcedure .......................................................................................................................................... 16 4.4.TestData .................................................................................................................................................... 16 5.AntennaRequirement ......................................................................................................................................... 21 5.1.TestStandardandRequirement ............................................................................................................ 21 5.2.AntennaConnectedConstruction .......................................................................................................... 21 APPENDIXI--TESTSETUPPHOTOGRAPH ................................................................................................... 22 APPENDIXII--EXTERNALPHOTOGRAPH ..................................................................................................... 22 APPENDIXIII--INTERNALPHOTOGRAPH ..................................................................................................... 22 ReportNo.:18220WC10123201FCCID:2AOKB-A2543Page3of22 Code:AB-RF-05-a TESTREPORT Applicant:AnkerInnovationsLimited Manufacturer:AnkerInnovationsLimited ProductName:PowerWaveMagnetic2-in-1StandLite ModelNo.:A2543 TradeMark: ANKER Rating(s): Input:DC5V/3A,DC9V/2A,DC12V/2A Wirelessoutput1:5W,7.5W,10W Wirelessoutput2:5W Totalpower:15WMax TestStandard(s): FCCPart15SubpartC,Paragraph15.209 TestMethod(s): ANSIC63.10:2020 ThedevicedescribedaboveistestedbyShenzhenAnbotekComplianceLaboratoryLimitedto determinethemaximumemissionlevelsemanatingfromthedeviceandtheseverelevelsofthedevice canendureanditsperformancecriterion.Themeasurementresultsarecontainedinthistestreportand ShenzhenAnbotekComplianceLaboratoryLimitedisassumedfullofresponsibilityfortheaccuracy andcompletenessofthesemeasurements.Also,thisreportshowsthattheEUT(EquipmentUnder Test)istechnicallycompliantwiththeFCCPart15SubpartCrequirements. Thisreportappliestoabovetestedsampleonlyandshallnotbereproducedinpartwithoutwritten approvalofShenzhenAnbotekComplianceLaboratoryLimited. DateofReceiptJun.09,2021 DateofTestJun.09~Jul.15,2021 PreparedBy (EllaLiang) Approved&AuthorizedSigner (KingkongJin) ReportNo.:18220WC10123201FCCID:2AOKB-A2543Page4of22 Code:AB-RF-05-a 1.GeneralInformation 1.1.ClientInformation Applicant:AnkerInnovationsLimited Address: Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon, Hongkong Manufacturer:AnkerInnovationsLimited Address: Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon, Hongkong 1.2.DescriptionofDevice(EUT) ProductName:PowerWaveMagnetic2-in-1StandLite ModelNo.:A2543 TradeMark:ANKER TestPowerSupply: AC120V,60Hzforadapter/AC240…

Text truncated - open the document above for the full version.

FCCID:2AOKB-A2543 PhotoofConductedEmissionMeasurement PhotoofRadiationEmissionTest PhotoofMPEMeasurement