2AOKB-A2544Anker MagGo Wireless Charger (2-in-1, Stand)

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Anker Innovations Limited Address Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Grantee Code 2AOKB FCC ID 2AOKB-A2544 Authorized Contact Name Louis Qi Contact Email [email protected] Contact Phone +86-755-86544807 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Anker Innovations Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Anker Innovations Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 05/15/2024 Print Name: Louis Qi Title: General Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

UNITED STATES DESIGNATED AGENT LETTER Date: 05/15/2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Anker Innovations Limited Company Name: Fantasia Trading LLC Grantee Code: 2AOKB FRN: 0033423005 Contact Name: Louis Qi Contact Name: Louis Qi Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA City/Province/Zip: 18 Harcourt Road, Hong Kong City/Province/Zip: Ontario, CA 91764 United States Telephone: +86-755-86544807 Telephone: (800) 988-7973 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2AOKB-A2544 ATTN: Director of Certification: We, < Anker Innovations Limited > and < Fantasia Trading LLC > understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, < Anker Innovations Limited > and < Fantasia Trading LLC > acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Louis Qi Name (Printed): Louis Qi Title: General Manager Title: Compliance Manager Signature: Signature:

Anker Innovations Limited Date: 05/15/2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AOKB-A2544 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Anker Innovations Limited This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Louis Qi Title: General Manager Signature: On behalf of Company: Anker Innovations Limited Telephone: +86-755-86544807 E-mail: [email protected]

Anker Innovations Limited TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2AOKB-A2544 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematics Block Diagrams Operational Descriptions Part Lists The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within confidential period, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual Sincerely, Print Name: Louis Qi Title: General Manager Signature: On behalf of Company: Anker Innovations Limited Telephone: +86-755-86544807 E-mail: [email protected]

Cover Letter-Wireless Charger Approval Date: 05/15/2024 Gentlemen: There’s a Wireless Charger that would like to have your authorization as an Inductive wireless power transfer applications approval. The specific product as below, Wireless Charger, with its designed features and specified description, meets special requirements for KDB 680106 D01 section 5.2 requirements. Company: Anker Innovations Limited Product Name: Anker MagGo Wireless Charger (2-in-1, Stand) Model Number: A2544 FCC ID: 2AOKB-A2544 KDB 680106 D01 Section 5.2 Requirements Product Technical Specification Reply (1) The power transfer frequency is below 1 MHz. Output 1: 110.60-145.60kHz Output 2: 356.20-369.80kHz Output 3: 117.20-146.60kHz Yes (2) The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. 15W max. Yes (3) A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact). Yes (4) Only § 2.1091-Mobile exposure conditions apply. For inductive applications where the primary does not physically attach to the client, and it is intended for desktop use, the desktop guidance in KDB 680106 D01 may be applied Yes (5) The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direction of the estimated maximum field strength, and for three points per axis or until a 1/d (inverse distance from the emitter structure) field strength decay is observed. Symmetry considerations may be used for test reduction purposes. The device shall be operated in documented worst-case compliance scenarios (i.e., the ones that lead to the maximum field components), and while all the radiating structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. Please refer to RF exposure report Yes (6) For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. If the design allows one or more radiating structures to be powered at a higher level while other radiating structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested. Please refer to RF exposure report Yes Sincerely, Print Name: Louis Qi Title: General Manager Signature: On behalf of Company: Anker Innovations Limited Telephone: +86-755-86544807 E-mail: [email protected]

制作：溪行 日期：20240513 版本：V3 黑色 镭雕 浅灰色（参考色板） 丝印 PT 877C 丝印 PT 3C 丝印 参考色板 垂直居中对齐 水平居中对齐 注意：日期依据生产日期进行镭雕 20240430修改认证LOGO 20240513删除INPUT

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171602 Page: 1 of 12 Keny Xu EMC Laboratory Manager 1 Cover Page Human Exposure Report Application No.: SZCR2405001716AT Applicant: Anker Innovations Limited Address of Applicant: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Manufacturer: Anker Innovations Limited Address of Manufacturer: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Factory: Gopod Group Holding Limited Address of Factory: 301, 4/F, 5/F, 6/F, Building#8 & 6/F, 7/F, Tower#C, Lian Jian Industrial Park II, Shang Henglang Community, DaLang St, LongHua Dist, Shenzhen Equipment Under Test (EUT): EUT Name: Anker MagGo Wireless Charger (2-in-1, Stand) Model No.: A2544 Trade Mark: Anker FCC ID: 2AOKB-A2544 Standards: 47 CFR PART 1, Subpart I, Section 1.1310 47 CFR PART 2, Subpart J, Section 2.1091 Date of Receipt: 2024-05-13 Date of Test: 2024-05-17 to 2024-06-06 Date of Issue: 2024-06-12 Test Result : Pass* * In the configuration tested, the EUT complied with the standards specified above SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171602 Page: 2 of 12 Revision Record Version Chapter Date Modifier Remark 01 2024-06-12 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171602 Page: 3 of 12 2 Contents 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 Details of E.U.T. ................................................................................................................................. 4 3.2 Description of Support Units .............................................................................................................. 5 3.3 Test Location ...................................................................................................................................... 6 3.4 Test Facility ........................................................................................................................................ 6 3.5 Deviation from Standards ................................................................................................................... 6 3.6 Abnormalities from Standard Conditions ........................................................................................... 7 4 Equipments Used during Test ................................................................................................................. 8 5 Test Results ............................................................................................................................................... 9 5.1 RF Exposure test ............................................................................................................................... 9 5.1.1 E.U.T. Operation .......................................................................................................................... 10 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171602 Page: 4 of 12 3 General Information 3.1 Details of E.U.T. Power supply: Adapter: Model: ASPD53a-P40W20 Input: 100-240V~50/60HZ 1.0A Output: 5.0V/3.0A, 9.0V/3.0A, 12.0V/3.0A, 15.0V/2.66A, 20.0V/2.0A Wireless output: Output 1: 5W/7.5W/15W(for iphone) Output 2: 5W(for TWS) Cable(s): USB-C to USB-C 150cm unshielded Operation frequency: Output 1 (for iphone): 110.60-145.60kHz & 356.20-369.80kHz Output 2 (for TWS): 117.20-146.60kHz Modulation type: Load modulation Antenna type: Loop Antenna Duty Cycle: 100% Remark 1:The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Remark 2: EUT comes in different colors. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171602 Page: 5 of 12 3.2 Description of Support Units Description Manufacturer Model No. Serial No. E-loading Customer provided N/A N/A Airpods Apple Airpods 2 REF. No.SEA05B06D iPhone 15Pro Apple A3104 REF. No.SEA16Q02 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171602 Page: 6 of 12 3.3 Test Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China. 518057. Tel: +86 755 2601 2053 Fax: +86 755 2671 0594 No tests were sub-contracted. 3.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 3816.01) SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01. • VCCI (Member No. 1937) The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz, Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen EMC laboratory have been registered in accordance with the Regulations for Voluntary Control Measures with Registration No.: G-20026, R-14188, C-12383 and T-11153 respectively. • FCC –Designation Number: CN1336 SGS-CSTC Standards Technical Services…

Text truncated - open the document above for the full version.

Justification statement for Antenna To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2AOKB-A2544 Dear Sir/Madam, Only radiated measurements are used for EUT with FCC ID: 2AOKB-A2544 to show compliance with FCC limits for fundamental and spurious emissions. All measurements were performed radiated and therefore additional antenna gain documentation is not required. The detailed information for antenna as below shows: Design Specifications Typical Antenna Type Loop Antenna Working Frequency Output 1 (for iphone): 110.60-145.60kHz & 356.20-369.80kHz Output 2 (for TWS): 117.20-146.60kHz Overall Dimensions As shown below

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171601 Page: 1 of 31 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2405001716AT Applicant: Anker Innovations Limited Address of Applicant: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Manufacturer: Anker Innovations Limited Address of Manufacturer: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Factory: Gopod Group Holding Limited Address of Factory: 301, 4/F, 5/F, 6/F, Building#8 & 6/F, 7/F, Tower#C, Lian Jian Industrial Park II, Shang Henglang Community, DaLang St, LongHua Dist, Shenzhen Equipment Under Test (EUT): EUT Name: Anker MagGo Wireless Charger (2-in-1, Stand) Model No.: A2544 Trade Mark: Anker FCC ID: 2AOKB-A2544 Standard(s) : 47 CFR Part 15, Subpart C Date of Receipt: 2024-05-13 Date of Test: 2024-05-17 to 2024-06-06 Date of Issue: 2024-06-12 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171601 Page: 2 of 31 Revision Record Version Chapter Date Modifier Remark 01 2024-06-12 Original Authorized for issue by: Charlie Dai/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171601 Page: 3 of 31 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C ANSI C63.10 (2013) Section 6.9.2 47 CFR Part 15, Subpart C 15.215 Pass Conducted Emissions at AC Mains Power Port (150kHz-30MHz) ANSI C63.10 (2013) Section 6.2 47 CFR Part 15, Subpart C 15.207 Pass Restricted Bands ANSI C63.10 (2013) Section 6.10.5 47 CFR Part 15, Subpart C 15.205 Pass Radiated Emissions (9kHz-30MHz) ANSI C63.10 (2013) Section 6.4 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Emissions (30MHz-1GHz) ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Remark: EUT comes in different colors. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/1 Report No.: SZCR240500171601 Page: 4 of 31 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Deviation from Standards ................................................................................................................... 7 4.7 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 10 6.1 Antenna Requirement ...................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion ................................................................................................................................... 10 7 Radio Spectrum Matter Test Results .................................................................................................... 11 7.1 20dB Bandwidth ............................................................................................................................... 11 7.1.1 E.U.T. Operation .......................................................................................................................... 11 7.1.2 Test Mode Description ................................................................................................................. 11 7.1.3 Test Setup Diagram ..................................................................................................................... 11 7.1.4 Measurement Procedure and Data............................................................................................. 11 7.2 Conducted Emissions at AC Mains Power Port (150kHz-30MHz) .................................................. 14 7.2.1 E.U.T. Operation .......................................................................................................................... 14 7.2.2 Test Mode Desc…

Text truncated - open the document above for the full version.