2AOKB-A2579APowerWave 3-in-1 Stand with Watch Charging Cable Holder

For FAQs and more information, please visit: https://www.anker .com/support 51005002430 V03 Model: A2579 English01 Deutsch05 Español07 Français09 Italiano11 Português15 Pусский 17 Türk 18 日本語 19 한국어 21 简体中文 22 繁體中文 24 ية ِ ب َ ر َ لع 26 ית ִ בר 27 0201 • For the safest and fastest charge, use original or cer tified cables. • This product is suitable for moderat e climates only. • The maximum ambient temperature during use of this product must not exceed 40°C. • Open flame sources, such as candles, must not be placed on this product. • Only use a dry cloth or brush to clean this product. FCC Statement This device complies with Par t 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer ence, and (2) this device must accept any interfer ence received, including interfer ence that may cause undesired operation. Warning: Changes or modifications not expres sly approved by the party responsible for compliance could void the user's authority to operat e the equipment. Note: T his equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par t 15 of the FCC Rules. These limits are designed to provide reasonable prot ection against harmful interfer ence in a residential installation. This equipment generat es, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer ence to radio communications. However , there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer ence to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interfer ence by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver . (3) Connect the equipment into an outlet on a circuit dier ent f rom that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set for th for an uncontrolled environment. This equipment should be installed and operat ed with minimum distance of 20 cm between the radiator & your body. Product Name: PowerWave 3-in-1 Stand with Wat ch Charging Cable Holder Model: A2579 English LED IndicatorStatus Solid blue for 3 seconds, then oConnected to power Solid blueCharging mobile device Flashing blueMetal or abnormal objects detected Flashing green Overvoltage prot ection, indicating you need to switch to a QC/PD adapter • You cannot charge your device wirelessly in these scenarios: O using a case with a magnetic/ir on plate; O using a case with a pop socket; O using an ultra-thick (> 5 mm) prot ective phone case. • Do not place any for eign objects between your device and the wir ele ss charger’s surface, including metal pads on a car mount, credit cards, door keys, coins, metal, or NFC cards, which will make wireless charging fail or cause overheating. • Wir eless chargers make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. • High temperatures will reduce charging speed and restrict power , which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25°C / 77°F. • Both the prot ective phone case and the position of your device on the wireless charger will aect the charging speed. The far ther it is placed fr om the center of the wireless charger, the slower the charging speed will be. Important Safet y Instructions Please ref er to the electrical and safet y information on the bottom befor e installing or operating the product. • Avoid dropping. • Do not disassemble. • Do not expose to liquids. T 0403 The following importer is the responsible party (for FCC matter s only). Company Name: Fantasia Trading LLC Addres s: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 Anker Innovations Limited Room 1318-19 , Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Stras se 3-5, 80807 Munich, Germany IC Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. L'appareil ne doit pas produire de brouillage; 2. L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-Gen Issue 5 March 2019 IC RF exposure statement: This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 10cm between the product and your body. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2579 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet addres s: https://www.anker .com/ Specifications Indoor use only. This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and…

Text truncated - open the document above for the full version.

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: PowerWave 3-in-1 Stand with Watch Charging Cable Holder Model Number: A2579 FCC Identifier: 2AOKB-A2579A We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 11/15/2022 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 < Anker Innovations Limited > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2022-11-10 Subject: Request for Confidentiality FCC ID: 2AOKB-A2579A To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☒ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. ☒ C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: louis Qi Title: Manager

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Appendix - EUT Photos Model: A2579 Photo 1 Photo 2 Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 transmitter 2 transmitter 1 Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 ----End of Report----

A2579 制作：溪行 时间：20201027 97%UV+3%黑 黑色版 Pt 9C PowerWave 3-in-1 Stand with Watch Charging Cable Holder Model/品番: A2579 FCC ID: 2AOKB-A2579A IC: 23451-A2579A HVIN: A2579A Input/入力: 12V⎓2.5A / 15V⎓2A Output/出力: Wireless output: 10W Max+5W Max USBA output: 5V⎓1A Anker Innovations Limited | Made in China Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom SN:1234567890123456 Model/品番: A2579 FCC ID: 2AOKB-A2579A IC: 23451-A2579A HVIN: A2579A Input/入力: 12V⎓2.5A / 15V⎓2A Output/出力: Wireless output: 10W Max+5W Max USBA output: 5V⎓1A

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Appendix - EUT Photos Model: A2579 Photo 1 Photo 2 Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 ----End of Report---- transmitter 1:ANT transmitter 2(coil 1) transmitter 2(coil 2)

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi220822016-01E2 Date of issue: 2022-11-03 Applicant: Anker Innovations Limited Product: PowerWave 3-in-1 Stand with Watch Charging Cable Holder Model(s): A2579 FCC ID: 2AOKB-A2579A Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 14 Report No.: MTi2108205012-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 14 Report No.: MTi2108205012-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Description of support units ................................................................................................................................ 7 2 Measurement uncertainty ............................................................................................................... 8 3 Test facilities and accreditations .................................................................................................... 8 3.1 Test laboratory .................................................................................................................................................... 8 4 List of test equipment ..................................................................................................................... 9 5 Test result ...................................................................................................................................... 10 5.2 Test setup ......................................................................................................................................................... 11 5.3 Test Procedures ................................................................................................................................................ 11 5.4 Equipment Approval Considerations item 5 b) of KDB 680106 D01 v03r01 .................................................... 12 5.5 Test results ....................................................................................................................................................... 13 Photographs of the Test Setup ............................................................................................................ 14 Photographs of the EUT....................................................................................................................... 14 Page 4 of 14 Report No.: MTi2108205012-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Manufacturer: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Product description Product name: PowerWave 3-in-1 Stand with Watch Charging Cable Holder Trademark: ANKER Model name: A2579 Series Model: N/A Standards: FCC CFR 47 PART 1, § 1.1310 Test method: KDB 680106 v03r01 Date of Test Date of test: 2022-10-26 ~ 2022-11-02 Test result: Pass Test Engineer : (Yanice Xie) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) Page 5 of 14 Report No.: MTi2108205012-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: PowerWave 3-in-1 Stand with Watch Charging Cable Holder Model name: A2579 Series Model: N/A Model difference: N/A Electrical rating: Input: 12V⎓2.5A, 15V⎓2A Output: Wireless stand output: 5W/7.5W/10W Wireless pad output: 5W USB-A output: 5VDC,1A Accessories: 1. Cable: USB-A to USB-C cable 1.5m 2. Adapter: Model: A2013 Input: 100-240V~0.7A 50-60Hz Output: 3.6-6.5V⎓3A / 6.5-9V⎓2A / 9-12V⎓1.5A Hardware version: V1.1 Software version: V1.4 RF specification: Operation frequency: transmitter 1(Wireless pad output): 115kHz – 205kHz transmitter 2(Wireless stand output): 115 kHz – 205 kHz Modulation type: ASK Antenna type: Coil Antenna 1.2 Description of test modes All the test modes were carried out with the EUT in normal operation, the final test mode of the EUT was the worst test mode for emission test, which was shown in this report and defined as: No. Emission te…

Text truncated - open the document above for the full version.

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi220822016-01E1 Date of issue: 2022-11-03 Applicant: Anker Innovations Limited Product: PowerWave 3-in-1 Stand with Watch Charging Cable Holder Model(s): A2579 FCC ID: 2AOKB-A2579A Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 24 Report No.: MTi220822016-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 24 Report No.: MTi220822016-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Contents 1. General Description ........................................................................................................................ 5 1.1 Description of the EUT .................................................................................................................................. 5 1.2 Description of test modes ............................................................................................................................. 5 1.3 Description of support units .......................................................................................................................... 7 1.4 Environmental conditions .............................................................................................................................. 7 1.5 Measurement uncertainty ............................................................................................................................. 7 2. Summary of Test Result .................................................................................................................. 8 3. Test Facilities and accreditations ................................................................................................... 9 3.1 Test laboratory .............................................................................................................................................. 9 4. List of test equipment ................................................................................................................... 10 5. Test Results ................................................................................................................................... 11 5.1 Antenna requirements ...................................................................................................................................... 11 5.2 Description of the EUT antenna ....................................................................................................................... 11 5.3 AC power line conducted emissions ........................................................................................................... 12 5.4 Radiated emissions..................................................................................................................................... 15 5.5 Occupied bandwidth test ............................................................................................................................ 22 Photographs of the test setup ............................................................................................................. 24 Photographs of the EUT....................................................................................................................... 24 Page 4 of 24 Report No.: MTi220822016-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Manufacturer: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Product description Product name: PowerWave 3-in-1 Stand with Watch Charging Cable Holder Trademark: ANKER Model name: A2579 Seres Model: N/A Standards: FCC 47 CFR Part 15 Subpart C Test method: ANSI C63.10-2013 Date of Test Date of test: 2022-10-26 ~ 2022-11-02 Test result: Pass Test Engineer : (Yanice Xie) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) Page 5 of 24 Report No.: MTi220822016-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 1. General Description 1.1 Description of the EUT Product name: PowerWave 3-in-1 Stand with Watch Charging Cable Holder Model name: A2579 Series Model: N/A Model difference: N/A Electrical rating: Input: 12V⎓2.5A, 15V⎓2A Output: Wireless stand output: 5W/7.5W/10W Wireless pad output: 5W USB-A output: 5VDC,1A Accessories: 1. Cable: USB-A to USB-C cable 1.5m 2. Adapter: Model: A2013 Input: 100-240V~0.7A 50-60Hz Output: 3.6-6.5V⎓3A / 6.5-9V⎓2A / 9-12V⎓1.5A Hardware version: V1.1 Software version: V…

Text truncated - open the document above for the full version.

湖南炬神电子有限公司 HUNANGIANTSUNPOWERELECTRONICSCO.,LTD 湖南郴州有色金属产业园区台湾工业园第16、17幢 电话(TEL)：0735-2668666传真(FAX)：0735-2668000 规格承认书 SpecificationForApproval 版本REV: 专案编码（CaseNo.）:B2570 炬神料号（GSPPartsNo.）:10801-0006 制造商名称/型号(Name/Model):A11单线圈发射模组 元件规格(ComponentsSpec.):A11单线圈发射模块 制造商(简称)(Manufacturer):聚源 供应商(简称)(Supplier):聚源 承认书编号(No.ofApproved): 承认日期(DateofApproved): 管理NO.：GSP-3GC-163-001A/2 收旧（作废）承认书 GSP料号 版本 日期 发行部门 (文管中心) 承认部门 主管批准 审核 拟制 环保□安规□电子□机构□ 条件 接收□ 接收□ 1．如有任何变更，须于事前联系，取得承认后方可变更； 2．相关单位需建档保存，条件接收前提见检验报告； 3．如无特殊说明，收旧前一版本时，须将内部及供应商的承认书料号全部收旧。 共5页 ChangeChangeTheDetail Version1.0.0part1of5 更改目录 更改事项修改前修改后修改日期修改人员 封面变更 //2020-05-23 客户 磁片变更 50±0.549-50.52020-11-18 Anker项目组 SpecificationsReferenceDesigns Version1.0.0part2of5 产品型号： ModelNumber B2570 客户料号： CustomerP/N 10801-0006 供应商料号： SupplierP/N A11**-JSDZ0001-0001 一，外观与尺寸（AppearanceSize）：（单位/mm） A20.5±0.5 B43.5±1 C49-50.5 D12.5±2 E4MAX F49±0.5 G43±0.5 H1.0±0.2 I2.5MAX J K L M N O P Q R S T U V W X Y Z SpecificationsReferenceDesigns Version1.0.0part3of5 二，原理图（SchematicDiagram）： 三，绕线参数（WindingParameters）： 绕组 Winding 开始 Start 结束 Finish 圈数 Turns 线径 LineDiameter 绕线方式 WindingWay 绕线方向 WindingDirection 层数&圈数 Layer&Circle SF10TS 0.08*105P丝包线单层密绕顺时针1层/10TS 四，电气特性（ElectricalCharacteristics）： 项目 Item 端子 Terminal 测试条件 TestConditions 测试仪器 TestInstrument 参数 Parameter 单位 Unit 数值 NumericalValue 电感 S-F100KHz/1.00V/100Ω 1062电桥 Inductance @100KHz/1V μH6.4μH±5% Q值S-F100KHz/1.00V/100Ω1062电桥Q@100KHz/1V80MIN 电阻 S-F100KHz/1.00V/100Ω 1062电桥 RS@100KHz/1VmΩ55MAX EncascmentThepackingway Version1.0.0part4of5 产品 Product 单层数量 Singlelayerquantity 层数/箱 Layer/Box 总数/箱 Total/Box 重量 Weigh A11270pcs 3层 810pcs 1、每层珍珠棉可装270pcs产品； 2、每箱可装3层珍珠棉，即可装810产品 MaterielBillOfMaterials Version1.0.0part5of5 材料清单 MaterialList 客户料号: CustomerP/N 10801-0006 制造商料号: SupplierP/N A11**-JSDZ0001-0001 序号 No. 材料名称 MaterialName 材料规格 MaterialSpecification 材料代号 MaterialCode 制作商 Manufacturer 1 自粘丝包线0.08*105P XCSBX-00080105-0001 2无铅锡条高温WQXT*-33002420-0013 3 胶水树脂胶WNJS*-00000015-0021 4高温胶带8mmGWJD*-18000008-0010 5 双面胶49*43*0.08mmSMJ**-49043008-0003 6圆形硬磁片50*1mmCPY*Y-50000010-0018 7 珍珠棉380*280*55mmBZH**-38028055-0020 8纸箱400*305*190mmZH***-40030519-0015 9 10 11 12 13

湖南炬神电子有限公司 HUNANGIANTSUNPOWERELECTRONICSCO.,LTD 湖南郴州有色金属产业园区台湾工业园第16、17幢 电话(TEL)：0735-2668666传真(FAX)：0735-2668000 规格承认书 SpecificationForApproval 版本REV: 专案编码（CaseNo.）:(A2579)W0015-HO 炬神料号（GSPPartsNo.）:10801-0027 制造商名称/型号(Name/Model):MP-A20双线圈发射模组 元件规格(ComponentsSpec.):MP-A20双线圈发射模块 制造商(简称)(Manufacturer):聚源 供应商(简称)(Supplier):聚源 承认书编号(No.ofApproved): 承认日期(DateofApproved): 管理NO.：GSP-3GC-163-001A/2 收旧（作废）承认书 GSP料号 版本 日期 发行部门 (文管中心) 承认部门 主管批准 审核 拟制 环保□安规□电子□机构□ 条件 接收□ 接收□ 1．如有任何变更，须于事前联系，取得承认后方可变更； 2．相关单位需建档保存，条件接收前提见检验报告； 3．如无特殊说明，收旧前一版本时，须将内部及供应商的承认书料号全部收旧。 共5页 ChangeChangeTheDetail Version1.0.0part1of5 更改目录 更改事项修改前修改后修改日期修改人员 SpecificationsReferenceDesigns Version1.0.0part2of5 产品型号： ModelNumber MP-A20双线圈发射模组 客户料号： CustomerP/N 供应商料号： SupplierP/N 一，外观与尺寸（AppearanceSize）：（单位/mm） A19.5±0.5 B27.5±0.5 C41±0.8 D49±0.8 E26.3±0.5 F64.3±0.5 G35±1.5 H4MAX I1.8MAX J43.5±0.5 K52.5±0.5 L94.4±0.7 M4.5MAX N1±0.2 O P Q R S T U V W X Y Z SpecificationsReferenceDesigns Version1.0.0part3of5 二，原理图（SchematicDiagram）： 三，绕线参数（WindingParameters）： 绕组 Winding 开始 Start 结束 Finish 圈数 Turns 线径 LineDiameter 绕线方式 WindingWay 绕线方向 WindingDirection 层数&圈数 Layer&Circle SF9TS 0.08*105P密绕逆时针1层/9TS 四，电气特性（ElectricalCharacteristics）： 项目 Item 端子 Terminal 测试条件 TestConditions 测试仪器 TestInstrument 参数 Parameter 单位 Unit 数值 NumericalValue 电感 S-F100KHz/1.00V/100Ω 1062电桥 Inductance @100KHz/1V μH6.9μH±6% Q值S-F100KHz/1.00V/100Ω1062电桥Q@100KHz/1V75MIN 电阻 S-F100KHz/1.00V/100Ω 1062电桥 RS@100KHz/1VmΩ60MAX EncascmentBillOfMaterials Version1.0.0part4of5 产品 Product 单层数量 Singlelayerquantity 层数/箱 Layer/Box 总数/箱 Total/Box 重量 Weigh MP-A2080pcs 3层 240pcs 1 、每层珍珠棉可装 80pcs 产品； 2 、每箱可装 3 层珍珠棉，即可装 240 产品 MaterielBillOfMaterials Version1.0.0part5of5 材料清单 MaterialList 客户料号: CustomerP/N 制造商料号: SupplierP/N 序号 No. 材料名称 MaterialName 材料规格 MaterialSpecification 材料代号 MaterialCode 制作商 Manufacturer 1 自粘丝包线0.08*105P XCSBX-00080105-0001 2 无铅锡条高温WQXT*-33002420-0013 3 胶水树脂胶WNJS*-00000015-0021 4 双面胶92.5*51*0.08mmPET**-92551008-0003 5 双拼磁片47.2*52.5*1mm（*2）CPY*F-47252510-0018 6 珍珠棉380*280*62mmBZH**-38028062-0011 7 纸箱400*305*21mmZH***-40030521-0015 8 9 10 11 12 13

Page 1 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Appendix - Test Setup Photos Model: A2579 Radiated emissions – Below 30 MHz Radiated emissions –Below 1 GHz Page 2 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Conducted emissions MPE ----End of Report----