2AOKB-A2598wireless charger

Product Number: A2598 51005003124 V01 For FAQs and more information, please visit: anker.com/support @Anker Deutschland @Anker Japan @Anker @AnkerOcial @Anker_JP @anker_ocial @anker_jp 02 01 EN LED IndicatorsStatus Two LED lights stay blue for 3 seconds, then turn off Connected to power The left LED light stays blue for 6 seconds, then turns off Charging your phone The right LED light stays blue for 6 seconds, then turns off Charging your earbuds Flashing blue • • Metal objects detected • • Overvoltage or undervoltage protection • • Incompatible AC adapter connected, indicating that you need to switch to a Quick Charge 2.0/3.0 or Power Delivery adapter T • • You cannot charge your device wirelessly in these scenarios: using a case with a magnetic/iron plate; using a case with a pop socket; using an ultra-thick (> 5 mm) protective phone case. • • Connect the wireless charger to a Quick Charge 2.0/3.0 or Power Delivery wall adapter. Do not connect to a 5V/1A wall charger or a USB port on a computer as it may affect the wireless charging function. • • Do not place any foreign objects between your device and the wireless charger’s surface, including metal pads on a car mount, magnetic cards, door keys, coins, NFC cards or other metal objects, as they could potentially demagnetize the wireless charger, affect the charging speed, or cause overheating. • • Wireless charging products make charging more convenient than wired chargers, but confined by current wireless technology, their charging speed is slower than that of wired chargers. • • High temperatures will reduce charging speed and restrict power. It is recommended that you charge your device in environments with temperatures below 40°C / 104°F. Important Safety Instructions Please refer to the electrical and safety information on the bottom before installing or operating the product. • • Avoid dropping. • • Do not disassemble. • • Do not expose to liquids. • • This product is suitable for moderate climates only. • • The maximum ambient temperature during use of this product must not exceed 40°C. • • Open flame sources, such as candles, must not be placed on this product. • • Only use a dry cloth or brush to clean this product. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an 04 03 uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body. Model: A2598 The following importer is the responsible party (for FCC matters only). Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764 Telephone: +1 800 988 7973 IC Caution Radio Standards Specification RSS-Gen, issue 5 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. RF exposure statement: The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator and your body. Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas causer d'interférences. (2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil. Déclaration d'exposition RF: L'équipement est conforme à la limite d'exposition aux radiations de la IC établie pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 10 cm entre le radiateur et votre corps. This product complies with the radio interference requirements of the European Community. Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2598 is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com/ GB Declaration of Conformity Hereby, Anker Innovations Limited declares that the product type A2598…

Text truncated - open the document above for the full version.

DATE : 2021-11-18 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AOKB-A2598 Product Name: wireless charger Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name：louis Qi Title：General Manager Company：Anker Innovations Limited

DATE : 2021-11-18 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name：louis Qi Title：General Manager Company：Anker Innovations Limited

DATE : 2021-11-18 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint EST Technology Co., Ltd. Address:Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong <Signature> Name：louis Qi Title：General Manager Applicant Company：Anker Innovations Limited

DATE : 2021-11-18 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AOKB-A2598 Product Name: wireless charger Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.:  Test Setup Photos  External Photos  Internal Photos  User Manual The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. <Signature> Name：louis Qi Title：General Manager Company：Anker Innovations Limited

Ex xternal Pho M/N: A259 otos 98 Ex xternal Pho M/N: A259 otos 98 Ex xternal Pho M/N: A259 otos 98 Ex xternal Pho M/N: A259 otos 98 Ex xternal Pho M/N: A259 otos 98 Ex xternal Pho M/N: A259 otos 98 Ex xternal Pho M/N: A259 otos 98

wireless charger Model: A2598 FCC ID: 2AOKB-A2598 IC: 23451-A2598 Input: 9V 2A / 9V 3A Wireless Output: 10W Max + 5W Max USB-A Output: 5V 0.6A Anker Innovations Limited | Made in China SN: 1234567890123456 0.3M1M

5W A W Coil Antenna In nternal Pho M/N: A259 otos 98 In nternal Pho M/N: A259 otos 98 10W Ante W Coil enna

FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111175 Page 1 of 9 RF EXPOSURE REPORT FOR CERTIFICATION On Behalf of Anker Innovations Limited wireless charger Model Number: A2598 FCC ID: 2AOKB-A2598 Applicant: Anker Innovations Limited Address: Room 1318-19 , Hollywood Plaza , 610 Nathan Road , Mongkok , Kowloon , HONG KONG Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2111175 Date of Test: Oct. 29~Nov. 16, 2021 Date of Report: Nov. 17, 2021 FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111175 Page 2 of 9 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. SUMMARY OF TEST ......................................................................................................................... 4 1.1. Summary of test result ...................................................................................................................... 4 1.2. Test Mode ......................................................................................................................................... 4 1.3. Test Equipment List ......................................................................................................................... 4 2. MAXIMUM PERMISSIBLE EXPOSURE ............................................................................................... 5 2.1. Limit ................................................................................................................................................. 5 2.2. Test Setup A ..................................................................................................................................... 5 2.3. Test Setup B ..................................................................................................................................... 6 2.4. Test Procedure .................................................................................................................................. 6 2.5. Equipment Approval Considerations ............................................................................................... 7 2.6. Test Result for Test setup A: ............................................................................................................ 8 2.7. Test Result for Test setup B: ............................................................................................................ 9 FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111175 Page 4 of 9 1. SUMMARY OF TEST 1.1. Summary of test result Report Section Description of Test Item FCC Standard Section Results 3 Maximum Permissible Exposure Part 1.1307(b)&1.1310 PASS 1.2. Test Mode 1.3. Test Equipment List Equipment ManufacturerModel No. Serial No. Last Cal. Next Cal. Electric and Magnetic Field Probe-Analyzer Narda S.T.S./PMM EHP-200A EST-E106 June 13,21 1 Year Test Software Narda EHP200-TSRel 1.92 N/A N/A Test uncertainty: ±1.62 dB (H-field);±1.64 dB (E-field) at a level of confidence of 95%. Test Item Test Mode Maximum Permissible Exposure Wireless Charging with Full Load Note： The worst Full Load status is recorded in the report FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111175 Page 5 of 9 2. MAXIMUM PERMISSIBLE EXPOSURE 2.1. Limit Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 Note: 1. f = frequency in MHz * = Plane-wave equivalent power density. 2. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. 2.2. Test Setup A FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111175 Page 6 of 9 2.3. Test Setup B 2.4. Test Procedure a. The test was performed on 360 degree turn table in anechoic chamber. b. The probe was placed at 15 cm surrounding the device and 20 cm above the top of the charger and the geometric centre of the probe, for test setup A. c. Measure magnetic and electrical field strength at a distance 10cm to 1cm at 1cm iteration, Which is between the edge of the charger and the edge of of probe, for test setup B. d. The highest emission level was recorded and compared with limit as soon as measurement of each point; A, B, C, D, E were completed. e. The EUT was measured according to the dictates of KDB680106D01v03; And KDB Tracking Number 671578; TCB Workshop, October 2018, 5.2 RF Exposure Procedures. FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111175 Page 7 of 9 2.5. Equipment Approval Considerations Inductive wireless power transfer applications with supporting field strength results and meeting all of the following requirements are not required to submit a KDB inquiry for devices approved using SDoC or a PAG for equipment approved using certification to address RF exposure compliance. 1 Power transfer frequency is less that …

Text truncated - open the document above for the full version.

FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111174 Page 1 of 23 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of Anker Innovations Limited wireless charger Model Number: A2598 FCC ID: 2AOKB-A2598 Applicant: Anker Innovations Limited Address: Room 1318-19 , Hollywood Plaza , 610 Nathan Road , Mongkok , Kowloon , HONG KONG Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2111174 Date of Test: Oct. 29~Nov. 16, 2021 Date of Report: Nov. 17, 2021 FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111174 Page 2 of 23 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION......................................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................. 4 1.1. Description of Device (EUT) ........................................................................................................... 4 2. SUMMARY OF TEST ......................................................................................................................... 5 2.1. Summary of test result ...................................................................................................................... 5 2.2. Test Facilities ................................................................................................................................... 6 2.3. Measurement uncertainty ................................................................................................................. 7 2.4. Assistant equipment used for test ..................................................................................................... 7 2.5. Block Diagram ................................................................................................................................. 7 2.6. Test Mode ......................................................................................................................................... 8 2.7. Test Equipment List ......................................................................................................................... 8 3. RADIATED EMISSION ...................................................................................................................... 9 3.1. Limit ................................................................................................................................................. 9 3.2. Test Setup ....................................................................................................................................... 10 3.3. Spectrum Analyzer Setting ............................................................................................................. 11 3.4. Test Procedure ................................................................................................................................ 11 3.5. Test Result ...................................................................................................................................... 12 4. AC POWER LINE CONDUCTED EMISSIONS .................................................................................... 18 4.1. Limit ............................................................................................................................................... 18 4.2. Test Setup ....................................................................................................................................... 18 4.3. Spectrum Analyzer Setting ............................................................................................................. 18 4.4. Test Procedure ................................................................................................................................ 18 4.5. Test Result ...................................................................................................................................... 19 5. ANTENNA REQUIREMENTS ............................................................................................................ 23 5.1. Limit ............................................................................................................................................... 23 5.2. Test Result ...................................................................................................................................... 23 FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111174 Page 4 of 23 1. GENERAL INFORMATION 1.1. Description of Device (EUT) Note: For a more detailed features description, please refer to the manufacturer’s specifications or the user's manual. Product Name : wireless charger Model Number : A2598 Software Version : VER 01 Hardware Version : VER 01 Operation Frequency : 111KHz-205KHz Max Wireless Charge Power : 15W Max Field Strength of Fundamental : 77.30dBuV/m Modulation Type : ASK Antenna Type : Induction coil Sample Type : Prototype production FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111174 Page 5 of 23 2. SUMMARY OF TEST 2.1. Summary of test result Report Section Description of Test Item FCC Standard Section Results 3 Radiated Emission 15.205 15.209 PASS 4 AC Power Line Conducted Emissions 15.207 PASS 5 Antenna Requirement 15.203 PASS Note: 1. “N/A” denotes test is not applicable in this test report FCC ID: 2AOKB-A2598 EST Technology Co., Ltd Report No. ESTE-R2111174 Page 6 of 23 2.2. Test Facilities EMC Lab : Certificated by CNAS, CHINA Registration No.: L5288 This Certificate is valid until: November 12, 2023 Certificated by FCC, USA Designation Number: CN1215 This Certificate is valid until: January 31, 2022 Certificated by A2LA, USA Registration No.: 4366.01 This Certificate is valid until: January 31, 2022 Certificated by Industry Canada CAB identifier No.: CN0035 This Certifica…

Text truncated - open the document above for the full version.

Con nducted Tes t Rad Rad diated Test ( diated Test ( (9kHz-30 M (30MHz-1G MHz) GHz) Expposure Test