2AOKB-A25M0Anker MagGo Wireless Charger (15W, Pad)

PT 08IT 07FR 06ES 05DE 04EN 01EN 02EN 03 This product complies with the radio interference requirements of the European Community. GB Declaration of Conformity Hereby, Anker Innovations Limited declares that this product is in compliance with Radio Equipment Regulations 2017 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: support.anker.com To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user's body and the product. EU Declaration of Conformity Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet address: support.anker.com To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user's body and the product. Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong Anker Innovations Deutschland GmbH Georg-Muche-Strasse 3, 80807 Munich, Germany Anker Technology (UK) Limited, GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom Indoor use only This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. TX/RX Frequency Range: 110-148kHz(Only for EU and UK) Radiated H-Field:-25.59dBuA/m(@10m)(Only for EU and UK) DE •• Dieses kabellose Ladegerät ist nicht mit Nicht-MagSafe-Telefonhüllen, wie etwa OtterBox Defender-Hüllen, kompatibel. •• Schließen Sie das kabellose Ladegerät an einen Quick Charge 2.0/3.0- oder Power Delivery-Wandadapter an. Schließen Sie das Gerät nicht an ein 5 V/1 A-Wandladegerät oder einen USB-Anschluss eines Computers an, da dies die Funktion zum kabellosen Aufladen beeinträchtigen kann. •• Legen Sie keine Fremdkörper zwischen Ihr Gerät und die Oberfläche des kabellosen Ladegeräts, einschließlich Metallpads an einer Kfz- Halterung, Magnetkarten, Türschlüssel, Münzen, NFC-Karten oder andere Metallgegenstände, da diese das kabellose Ladegerät möglicherweise entmagnetisieren, die Ladegeschwindigkeit beeinträchtigen oder eine Überhitzung verursachen können. •• Kabellose Ladegeräte machen das Aufladen bequemer als kabelgebundene Ladegeräte, aber aufgrund der aktuellen kabellosen Technologie ist ihre Ladegeschwindigkeit langsamer als die von kabelgebundenen Ladegeräten. •• Hohe Temperaturen verringern die Ladegeschwindigkeit und schränken die Leistung ein. Es wird empfohlen, das Gerät in Umgebungen mit Temperaturen unter 40 °C aufzuladen. Wichtige Sicherheitshinweise Lesen Sie die elektrischen und Sicherheitsinformationen unten, bevor Sie das Produkt installieren oder betreiben. •• Die maximale Umgebungstemperatur während der Verwendung des Produkts darf 40 °C nicht übersteigen. Konformitätserklärung Anker Innovations Limited erklärt hiermit, dass dieses Produkt die Richtlinien 2014/53/EU und 2011/65/EU erfüllt. Der vollständige Text der EU- Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: support.anker.com Verwendung nur in Innenbereichen Dieses Symbol bedeutet, dass das Produkt nicht als Hausmüll entsorgt werden darf. Stattdessen ist es an der jeweiligen Sammelstelle für das Recycling von Elektro- und Elektronikgeräten abzugeben. TX-/RX-Frequenzbereich: 110-148kHz(nur EU/UK) Abgestrahltes H-Feld:-25.59dBuA/m(@10m)(nur EU/UK) ES •• Este cargador inalámbrico no es compatible con fundas para teléfonos que no sean MagSafe, como las fundas Otterbox Defender. •• Conecte el cargador inalámbrico a un adaptador de Quick Charge 2.0/3.0 o Power Delivery. No lo conecte a un cargador de pared de 5 V/1 A ni a un puerto USB de ordenador, ya que puede afectar a la función de carga inalámbrica. •• No coloque ningún objeto extraño entre su dispositivo y la superficie del cargador inalámbrico, como almohadillas metálicas de soportes para automóvil, tarjetas magnéticas, llaves de puertas, monedas, tarjetas NFC u otros objetos metálicos, ya que podrían desmagnetizar el cargador inalámbrico y afectar a la velocidad de carga o provocar un sobrecalentamiento. •• Los productos con carga inalámbrica ofrecen mayor comodidad que los cargadores con cable pero, al estar limitados por la tecnología inalámbrica actual, generan una velocidad de carga más lenta que estos. •• Las temperaturas elevadas reducen la velocidad de carga y limitan la potencia. Se recomienda cargar el dispositivo en entornos con una temperatura inferior a 40 °C (104 °F). Instrucciones de seguridad importantes Consulte la información sobre componentes eléctricos y seguridad de la parte final antes de instalar o utilizar el producto. •• La temperatura ambiente máxima mientras se usa el producto no debe superar los 40 °C. Declaración de conformidad Por la presente, Anker Innovations Limited declara que este producto cumple con la Directivas 2014/53 UE y 2011/65/UE. El texto completo de la declaración de conformidad de la UE está disponible en la siguiente dirección de Internet: support.anker.com Solo para uso en interiores Este símbolo indica que el producto no puede desecharse junto con los residuos domésticos. En su lugar, debe llevarse a un punto de recogida adecuado para el reciclaje de aparatos eléctricos y electrónicos. Rango de frecuencias TX/RX: 110-148kHz(solo EE. UU. y Reino Unido) Campo H de radiación:-25.59dBuA/m(@10m)(solo EE. UU. y Reino Unido) FR •• Ce chargeur sans fil n’est pas compatible avec les étuis de protection pour téléphone non-MagSafe, comme les étuis Otterbox Defender. •• Connectez le chargeur sans fil à un adaptateur mural Quick Charge 2.0/3.0 ou Power Delivery. N’effectuez pas le raccordement à un chargeur mural 5 V/1 A ou à un port USB d’un ordinate…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Fantasia Trading LLC FRN: 0033423005 Contact Name: Louis Qi Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 Telephone No: +1 (800)988 7973 Email: [email protected] Applicant: Company name: Anker Innovations Limited Product Description: Anker MagGo Wireless Charger (15W, Pad) Grantee code: 2AOKB FCC ID: 2AOKB-A25M0 Contact Name: Louis Qi Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Telephone No: +86-13652441319 Email: [email protected] [Anker Innovations Limited] certifies that, as of the date of this filing of the application with the TCB, [Fantasia Trading LLC] is our designated US agent for service of process for the above referenced FCC ID. [Anker Innovations Limited] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Fantasia Trading LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 08/24/2023 Applicant’s Name: Louis Qi US Agent for Service of Process’s Name: Louis Qi Title: Manager Title: Compliance Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Anker Innovations Limited Grantee code: 2AOKB FCC ID: 2AOKB-A25M0 Contact Name: Louis Qi Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Telephone No: +86-13652441319 Fax No: / Email: [email protected] i. [Anker Innovations Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Anker Innovations Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Anker Innovations Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 08.21.2023 Applicant’s Name: Louis Qi Title: Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: Anker MagGo Wireless Charger (15W, Pad) Model Number: A25M0 FCC Identifier: 2AOKB-A25M0 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: louis Qi Date: 8/24/2023 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 < Anker Innovations Limited > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-08-21 Subject: Request for Confidentiality FCC ID: 2AOKB-A25M0 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☒ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: louis Qi Title: Manager

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT Model: A25M0 External Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

A25M0 (US JP) 中国生产 制作：溪行 日期：20230822 版本：V2 4mm 4mm 垂直居中 0.7mm 0.7mm 0.7mm 垂直居中 水平居中 水平居中 深灰 丝印 PT-433C 镭雕 PT-433C 白 丝印 PT 427C 镭雕 PT 427C 20230818增加RCM 2023082删除qi

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT Model: A25M0 Internal ANT Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi230804004-01E2 Date of issue: 2023-08-18 Applicant: Anker Innovations Limited Product: Anker MagGo Wireless Charger (15W, Pad) Model(s): A25M0 FCC ID: 2AOKB-A25M0 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 13 Report No.: MTi230804004-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 13 Report No.: MTi230804004-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Description of support units ................................................................................................................................ 6 2 Measurement uncertainty ............................................................................................................... 6 3 Test facilities and accreditations .................................................................................................... 7 3.1 Test laboratory .................................................................................................................................................... 7 4 List of test equipment ..................................................................................................................... 8 5 Test result ........................................................................................................................................ 9 5.2 Test setup ......................................................................................................................................................... 10 5.3 Test Procedures ................................................................................................................................................ 10 5.4 Equipment Approval Considerations item 5 b) of KDB 680106 D01 v03r01 .................................................... 11 5.5 Test results ....................................................................................................................................................... 12 Photographs of the Test Setup ............................................................................................................ 13 Photographs of the EUT....................................................................................................................... 13 Page 4 of 13 Report No.: MTi230804004-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Manufacturer: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Product description Product name: Anker MagGo Wireless Charger (15W, Pad) Trademark: ANKER Model name: A25M0 Series Model: N/A Standards: FCC CFR 47 PART 1, § 1.1310 Test method: KDB 680106 v03r01 Date of Test Date of test: 2023-08-08 to 2023-08-18 Test result: Pass Test Engineer : (Yanice.Xie) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) Page 5 of 13 Report No.: MTi230804004-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Anker MagGo Wireless Charger (15W, Pad) Model name: A25M0 Series Model: N/A Model difference: N/A Electrical rating: Input:9V⎓2.5A Output:15W Max/7.5W/5W Accessories: N/A Hardware version: V2.0.5 Software version: V1.1 RF specification: Operation frequency: 115 kHz – 205 kHz Modulation type: ASK Antenna type: Coil Antenna 1.2 Description of test modes All the test modes were carried out with the EUT in normal operation, the final test mode of the EUT was the worst test mode for emission test, which was shown in this report and defined as: No. Emission test modes Mode 1 Wireless output(5W) Mode 2 Wireless output(7.5W) Mode 3 Wireless output(15W) Mode 4 Stand-by The test data only show worst test mode: Mode 3 Page 6 of 13 Report No.: MTi230804004-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel…

Text truncated - open the document above for the full version.

FinePage1of4 DongguanFANYAElectronicsCo.,LTD TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATIONFORAPPROVAL CUSTOMER:SZ105 CUSTP/N: FINEP/N: DESC:FYSZ10512023041501 DATE: 2023/08/08 Version:A.0 PREPAREDBYCHECKED BY APPROVEDBYCUSTOMERAPPROVE Huangxiaoyuan CAIjyuDingBaoyuan DongguanFANYAElectronicsCo.,LTD Factoryaddress：No.194,LiuwuTechnologyEastRoad,ShijieTown,DongguanCity TEL：0769-22490287/22452492 FAX：0769-22499451 E-mail：[email protected] FinePage2of4 DongguanFANYAElectronicsCo.,LTD TEL：0769-22490287FAX：0769-22499451FY-GZ001 VersionChangeHistory Rev. BeforeChangeAfterChangeChangeDateApprovedBy A.0 newissue ----2023/08/0/8 DingBaoyuan FinePage3of4 DongguanFANYAElectronicsCo.,LTD TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATION DESC FYSZ10512023041501 Rev：A.0 CUST: SZ105 FineP/N： CUSTP/N: 一、DIMENSION:(mm) 二、原理图SCHEMATICDIAGRAM: A21.46±0.5 B39.3±0.5 C42.4±0.4 D5.52±1.5 E1.03±0.05 F 2.35-2.5 (Excludingthepaperthickness) G 2.5Max(Noyellowgum) 注： 1.Coilbackstickmagneticsheet，Coil backstickmagneticsheet,Middlepatch φ18mm*0.75,slot5.41*2.03mm，Small magneticpieceonesidepasteφ15* 0.08straightgroovewithhandtear ordinarybackglue； 2.φ41.2*0.153M9448Awithhandtear double-sidedbacktape。 3.EVAdouble-sidedfoamsize 5.3*1.8*1.5mmstickinthemagneticchip slot，NTC,model10K3380,length40mm± 2,wearblackheat-shrinksleeve,red copperpatentwrapwirereserved5mm again;tinlayer2±1mm； 三、WindingSpecification: NO.TERMINALWIRETurnsWindingDirection 1SF Litz0.08*65p 11TsCW 四、ELECTRICALCHARACTERISTICS: TEMPERATURE:25±10°C,RELATIVEHUMIDITY:65±20% NO.ITEMTERMINALSPECIFICATIONTESTFREQUENCYTESTEQUIPMENTS 1IND.S-F8.4uH±5%360KHz/1.0VTH2810 2DCRS-F70mΩMax360KHz/1.0VTH2810 3ACRS-F150mΩMax360KHz/1.0VTH2810 PREPAREDBY/DATECHECKEDBY/DATE Huangxiaoyuan2023/08/08CAIjyu2023/08/08 FinePage4of4 DongguanFANYAElectronicsCo.,LTD TEL：0769-22490287FAX：0769-22499451FY-GZ001 SPECIFICATION DESC FYSZ10512023041501 Rev：A.0 CUST: SZ105 FineP/N： CUSTP/N: 五、PACKONG: 5.1Packingpictures: 5.2PackingQuantity: 5.3Thepackagingshallbebasedontheexistingpackingplateandtheactualdeliverypackageshallprevail.If thereisanyrequirement,wecancustomizeit. 六、Materiallist: numberMaterialnameDescriptionManufacturer 1 Litz0.08*65pLitz0.08*65p 2 NoleadtinstripNoleadtinstrip 3 magneticsheet Magneticchipsizeφ42.4*1.15mm,open doublestraightgroove 4 SmallmagneticsheetSmallmagneticsheet 5 3M9448Abackglueφ41.2*0.15doublegroove3M9448Awith handteardouble-sidedbacking 6 Ordinarybackglueφ15*0.08straightgroovewithhandtear ordinarybackglue 7 EVAdouble-sidedfoam foam Dimension:5.3*1.8*1.5mm 8 NTCModel:10K3380,length40mm,wearblack heat-shrinksleeve ItemQuantityMaterial Box200Pcs370*265*55mm BigCarton 1000Pcs420*270*310mm PREPAREDBY/DATECHECKEDBY/DATE Huangxiaoyuan2023/08/08CAIjyu2023/08/08

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi230804004-01E1 Date of issue: 2023-08-18 Applicant: Anker Innovations Limited Product: Anker MagGo Wireless Charger (15W, Pad) Model(s): A25M0 FCC ID: 2AOKB-A25M0 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 23 Report No.: MTi230804004-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 23 Report No.: MTi230804004-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Table of contents 1 General Description ......................................................................................................................... 5 1.1 Description of the EUT ............................................................................................................................... 5 1.2 Description of test modes .......................................................................................................................... 5 1.3 Environmental Conditions .......................................................................................................................... 6 1.4 Description of support units ....................................................................................................................... 6 1.5 Measurement uncertainty .......................................................................................................................... 6 2 Summary of Test Result .................................................................................................................. 7 3 Test Facilities and accreditations ................................................................................................... 8 3.1 Test laboratory ........................................................................................................................................... 8 4 List of test equipment ...................................................................................................................... 9 5 Evaluation Results (Evaluation) .................................................................................................... 10 5.1 Antenna requirement ............................................................................................................................... 10 6 Radio Spectrum Matter Test Results (RF) .................................................................................... 10 6.1 Conducted Emission at AC power line .................................................................................................... 10 6.2 20dB Occupied Bandwidth ...................................................................................................................... 13 6.3 Emissions in frequency bands (below 30MHz)........................................................................................ 16 6.4 Emissions in frequency bands (30MHz - 1GHz)...................................................................................... 19 Photographs of the test setup ............................................................................................................. 22 Photographs of the EUT....................................................................................................................... 23 Page 4 of 23 Report No.: MTi230804004-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Manufacturer: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok, Kowloon, Hong Kong Product description Product name: Anker MagGo Wireless Charger (15W, Pad) Trademark: ANKER Model name: A25M0 Series Model: N/A Standards: FCC 47 CFR Part 15 Subpart C Test method: ANSI C63.10-2013 Date of Test Date of test: 2023-08-08 to 2023-08-18 Test result: Pass Test Engineer : (Yanice.Xie) Reviewed By : (Leon Chen) Approved By : (Tom Xue) Page 5 of 23 Report No.: MTi230804004-01E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Anker MagGo Wireless Charger (15W, Pad) Model name: A25M0 Series Model: N/A Model difference: N/A Electrical rating: Input:9V⎓2.5A Output:15W Max/7.5W/5W Accessories: N/A Hardware version: V2.0.5 Software version: V1.1 RF specification Operation frequency: 115 kHz – 205 …

Text truncated - open the document above for the full version.

Page 1 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86…

Text truncated - open the document above for the full version.