2AOKB-T2182Robotic Vacuum Cleaner

RoboVac LR30 Hybrid+ Owner’s Manual T2181 51005003379 V01 English EN 01 Thank you for purchasing RoboVac. Carefully read all the instructions below before using this device, and keep this manual for future reference. Table of Contents 02 Important Safety Instructions 09 About Your RoboVac What's in the Box RoboVac Anatomy LED Indication Map Navigation and Management 15 Using Your RoboVac Important Tips Before Use Preparation Use the Auto Empty Station Use Your RoboVac with the EufyHome App Start / Stop Cleaning Select a Cleaning Mode Select a Suction Power Level Use Mopping System Use Your RoboVac with Amazon Alexa / the Google Assistant Enable / Disable the Child Safety Lock 29 Cleaning and Maintenance Clean the Dust Box, Water Tank, and Filter Clean the Rolling Brush Clean the Side Brushes Replace the Side Brushes Clean the Sensors and Charging Pins Clean the Swivel Wheel Clean the Mopping Cloth Replace the Dust Bag 38 Troubleshooting Voice Alert 42 Specifications 43 Customer Service English01 Français44 Italiano88 Español131 Nederlands173 Deutsch216 Pусский258 Türkçe304 EnglishEnglish 02 ENEN 03 Important Safety Instructions To reduce the risk of injury or damage, keep these instructions at hand when setting up, using, and maintaining this device. WARNING SYMBOLS USED This is the safety alert symbol. This symbol alerts you to potential hazards that could result in property damage and/or serious bodily harm or death. • This device can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of this device in a safe way and understand the hazards involved. • Children should be supervised to ensure they do not play with this device. • Cleaning and maintenance shall not be performed by children without adult supervision. • This device is only to be used with the auto empty station provided. • Before cleaning or maintaining this device, the plug must be removed from the outlet. • The battery in this device should only be replaced by a skilled professional. • Before removing the battery, disconnect the device from its power supply. • The battery must be removed before this device is disposed of. To remove the battery, first unscrew the screws on the bottom, then remove the back cover. Remove the battery by disconnecting the quick connector. • The used battery should be placed in a sealed plastic bag and disposed of safely according to local environmental regulations. • The external flexible cable or cord of the power supply unit cannot be replaced; if the cord is damaged, the power supply unit should be disposed of. • This device is for indoor use only. • This device is not a toy. Do not sit or stand on this device. Small children and pets should be supervised when this device is operating. • Store and operate this device in room temperature environments only. • Do not use this device to pick up anything that is burning or smoking. • Do not use this device to clean up spills of bleach, paint, chemicals, or anything wet. • Before using this device, pick up objects like clothing and loose paper. Lift up cords for blinds or curtains. Move power cords and sharp, pointed, or fragile objects out of the way. If this device passes over a power cord and drags it, an object could be pulled off a table or shelf. • If the room to be cleaned has a balcony, a physical barrier should be used to prevent access to the balcony and to ensure safe operation. • Do not place anything on top of this device. • Be aware that this device moves around on its own. Take care when walking in the area where this device is operating to avoid stepping on it. • Do not operate this device in areas with exposed electrical outlets on the floor. • Do not expose the electronics of this device, its battery, or the auto empty station. There are no user-serviceable parts inside. • Do not use this device on an unfinished, unsealed, waxed or rough floor. It may result in damage to the floor and this device. Use only on hard floor surfaces or low-pile carpets, and not on carpets with tasseled edges or loose threads. EnglishEnglish 04 ENEN 05 • This device has been designed to be used on floors without scratching them. We still recommend that you test this device on a small area of the room to be cleaned to ensure no scratches are made before cleaning the whole room. • Only use attachments recommended or described in this manual. • Do not handle the device or plug with wet hands. • Ensure that the dust bag and/or filters are correctly in- place before use. • Do not use a battery pack or device that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. • Do not expose the battery pack or device to fire or excessive heat. Exposure to fire or temperatures above 130°C / 266°F may cause an explosion. • Do not modify or attempt to repair the device or the battery pack (as applicable), except as indicated in the instructions for use and care. • Follow all charging instructions and do not charge the battery pack or device outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. • The laser distance sensor of this device meets the standards for Class I Laser Products in IEC 60825-1:2014 and will not generate hazardous laser radiation. Notice This symbol on the device or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being. When replacing …

Text truncated - open the document above for the full version.

Date (23/05/2022) TUV SUD BABT UNLIMITED TCB Octagon House, Segensworth North, Fareham, Hampshire, PO15 5RL, United Kingdom Confidentiality Request FCC ID: 2AOKB-T2182 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, (Anker Innovations Limited; Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong) hereby requests permanent confidential treatment of information accompanying this application as outlined below: Common exhibits for which confidentiality is requested are: Schematics Bill of Materials/Parts List Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: General Manager/ Louis Qi Telephone Number: +86-13652441319 Email: [email protected]

file: declaration letter-template Page 1 of 1 To: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Attention: From: Date: June 14, 2022 Fax No: 86 755 88285299 Total Page (Cover Included): 1 Project No.: Subject: Declaration letter We: Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong Officially notify TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch that the model differences are as follows: 1. The Robotic vacuum cleaner of all models have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction. 2. Different charging accessories used: T2193 and T2194 using charging base and adapter T2181 and T2182 using dust collector(T2999) 3. The appearance is different Product/PMN: RoboVac LR30 Hybrid+ Model no./HVIN: T2193, T2194, T2181, T2182 FCC ID: 2AOKB-T2182 IC: 23451-T2182 Company Officer: General Manager/ Louis Qi Telephone Number: +86-13652441319 Email: [email protected]

Details of: General view (For T2181) Details of: Front view (For T2181) Details of: Bottom view (For T2181) Details of: Bottom view (For T2181) Details of: Auto-empty Station Details of: Auto-empty Station Details of: Accessory Details of: Accessory Details of: Accessory Details of: Accessory Details of: Accessory

Details of: General view (For T2194) Details of: Front view (For T2194) Details of: Bottom view (For T2194) Details of: Bottom view (For T2194) Details of: Bottom view (For T2194) Details of: Adapter Details of: Charging base Details of: Bottom view of charging base Details of: Accessory Details of: Accessory Details of: Accessory Details of: Accessory Details of: Accessory

料号：
51004004449

Details of: Internal view Details of: Internal view Antenna Details of: Main PCB Details of: Main PCB WIFI module WIFI module Details of: Control PCB Details of: Control PCB Details of: Laser module Details of: Laser PCB Details of: Laser PCB Details of: Laser PCB Details of: Laser PCB Details of: Internal view of charging base Details of: PCB of charging base Details of: PCB of charging base Details of: Internal view of Auto-empty Station Details of: Internal view of Auto-empty Station Details of: Internal view of Auto-empty Station Details of: Main PCB view of Auto-empty Station Details of: Main PCB view of Auto-empty Station Details of: Control PCB view of Auto-empty Station Details of: Control PCB view of Auto-empty Station Details of: Control PCB view of Auto-empty Station Details of: Motor view of Auto-empty Station Details of: Motor view of Auto-empty Station Details of: Battery (for CMICR18650F9M-4S1P) Remark: NTC on the PCB. Details of: Wheel drive motor (for PRI-365SV-14175-51CBD/SM) Details of: Rotary brush motor (for PR-500EV-10470-31.5CB) Details of: Motor for rolling brush (for PRI-390SV-20143-66.6CBD/S) Details of: Suction motor (for 20N704P110) Details of: Laser motor (for RF-300CA-10500)

Report No: 68.910.22.0009.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 MPE Calculation Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong Product: Robotic Vacuum Cleaner FCC ID: 2AOKB-T2182 Model No.: T2193, T2194, T2181, T2182 Reference RF report # 68.910.22.0009.01 for WIFI report According to subpart 15.247(i)and subpart §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm2) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1,500 / / f/1500 30 1,500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² = power density (in appropriate units, e.g. mW/cm2); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); Report No: 68.910.22.0009.01A TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Nantou Checkpoint Road 2, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Calculated Data: For WIFI Maximum peak output power at antenna input terminal (dBm): 15.6 Maximum peak output power at antenna input terminal (mW): 36.31 Prediction distance (cm): 20 Antenna Gain, typical (dBi): 2.0 Maximum Antenna Gain (numeric): 1.58 The worst case is power density at predication frequency at 20 cm (mW/cm2): 0.114 MPE limit for general population exposure at prediction frequency (mW/cm2): 1.0 0.114 (mW/cm2) < 1 (mW/cm2) Result: Compliant TUV SUD China, Shenzhen Branch Reviewed by: Prepared By: Jessie He / EMC Project Manager Myron Yu/EMC Project Engineer Date: 2022-05-23 Date: 2022-05-23

Report Number: 68.910.22.0009.01 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 1 of 57 FCC/ISED - TEST REPORT Report Number : 68.910.22.0009.01 Date of Issue: May 23, 2022 Model : T2193, T2194, T2181, T2182 Product Type : RoboVac LR30 Hybrid+ Applicant : Anker Innovations Limited Address : Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, HongKong Production Facility : Guangdong Wangjia Intelligent Robot Co., Ltd. Address : Room 301, The Fifth Building, No.1 Junma Road, Humen Town, 523900 Dongguan, Guangdong, PEOPLE'S REPUBLIC OF CHINA Test Result : ◼ Positive  Negative Total pages including Appendices : 57 Any use for advertising purposes must be granted in writing. This technical report may only be quoted in full. This report is the result of a single examination of the object in question and is not generally applicable evaluation of the quality of other products in regular production. For further details, please see testing and certification regulation, chapter A-3.4. Report Number: 68.910.22.0009.01 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 2 of 57 1 Table of Contents 1 Table of Contents ................................................................................................................................................................. 2 2 Details about the Test Laboratory ..................................................................................................................................... 3 3 Description of the Equipment under Test ......................................................................................................................... 4 4 Summary of Test Standards ............................................................................................................................................... 5 5 Summary of Test Results ................................................................................................................................................... 6 6 General Remarks ................................................................................................................................................................. 7 7 Test Setups ........................................................................................................................................................................... 8 8 Systems test configuration ................................................................................................................................................. 9 9 Technical Requirement ......................................................................................................................................................... 10 9.1 Conducted Emission ................................................................................................................................................ 10 9.2 Conducted peak output power................................................................................................................................ 15 9.3 6dB bandwidth .......................................................................................................................................................... 17 9.4 99% bandwidth ......................................................................................................................................................... 22 9.5 Power spectral density ............................................................................................................................................. 27 9.6 Spurious RF conducted emissions ........................................................................................................................ 32 9.7 Band edge ................................................................................................................................................................. 46 9.8 Spurious radiated emissions for transmitter ......................................................................................................... 50 10 Test Equipment List ...................................................................................................................................................... 56 11 System Measurement Uncertainty ............................................................................................................................. 57 Report Number: 68.910.22.0009.01 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 3 of 57 2 Details about the Test Laboratory Details about the Test Laboratory Test Site 1 Company name: TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12 & 13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen, Guangdong 518052, China FCC Registration Number: 514049 FCC Designation Number: CN5009 ISED#: 10320A CAB identifier: CN0077 Telephone: 86 755 8828 6998 Fax: 86 755 8828 5299 Report Number: 68.910.22.0009.01 EMC_SZ_FR_23.02 FCC Release 2017-06-20 TÜV SÜD Certification and Testing (China) Co., Ltd. Shenzhen Branch Building 12&13, Zhiheng Wisdomland Business Park, Guankou Erlu, Nantou, Nanshan District, Shenzhen City, 518052, P. R. China Tel. +86 755 8828 6998, Fax: +86 755 8828 5299 Page 4 of 57 3 Description of the Equipment …

Text truncated - open the document above for the full version.

Test setup of: Conducted Emission Test setup of: Spurious Radiated Emissions (Below 1 GHz) Test setup of: Spurious Radiated Emissions (1-18 GHz) Test setup of: Spurious Radiated Emissions (Above 18 GHz)