2AOKB-T8416S350 Indoor Cam

0102030405060708 Choose a Location The camera can be placed on a table or shelf, or can be installed on a wall or ceiling. Select a location and height that achieves your desired view and is within reach of a power outlet. Note: Keep the camera at least 0.7ft/0.2m away from any objects or walls to avoid infrared reflection, which may impact night vision performance. Camera Field of View On a Table or Shelf WHAT’S INCLUDED You may need a screwdriver, drill, and ladder. QUICK START GUIDE S350 Indoor Cam PRODUCT OVERVIEW ① ④ ⑤ ⑥ SYNC ⑦ ⑧ ③ ② ① Wide-Angle Lens ⑤ Status LED ② Telephoto Lens ⑥ Speaker ③ Microphone ⑦ SYNC Button ④ microSD Slot Insert a microSD card* (not included) to store recordings ⑧ Power Input *Use at least a Class 10 microSD card with a maximum of 128 GB. LED INDICATORS Solid Violet System is initializing Solid Blue Working normally or ready for setup Blinking Red Not connected to the internet Solid Red Recording or the live stream is being viewed Flashing Blue and Red Firmware upgrade in progress Note: Keep the camera connected to a power source SET UP 1. Download and install the eufy Security app, and sign up for an account. 2. Connect the camera to a power source and wait until the status LED turns solid blue. 3. Tap + in the app and follow the in-app instructions to add your camera. My Devices INSTALL YOUR CAMERA Telephoto Lens Focusing Distance To ensure an optimal zoom experience from the telephoto lens, place the camera at least 8 ft (2.5 m) away from the area to be monitored. On the Wall On the Ceiling Quick Start Guide Screw PackPositioning StickerWall Mount S350 Indoor Cam USB Cable Power Adapter 2 ft 3.3 ft 2.6 ft 8ft 8 ft 9 ft 5.6 ft 2.6 ft 10 ft 6 ft Telephoto Lens in Focus Telephoto Field of View Install on a Wall or Ceiling Note: Disconnect the camera from the power outlet before mounting. 1. Mark the screw positions on the wall or ceiling with the positioning sticker and drill a pilot hole. 0910111213141516 2. Hold the mounting plate on the wall and make sure the "UP" arrow is pointing up. Secure the mounting plate to the wall or ceiling with the screws. On the Wall On the Ceiling 3. Keep the camera disconnected from power. Connect the USB-C Cable to the camera with the other end not connected to a power source. 4. If mounting on a wall, place the cable into the cable channel of the mounting plate. * Skip this step for ceiling installation. 5. Slide the camera onto the mounting plate and make sure it is attached securely. On the Wall On the Ceiling SYNC CUSTOMER SERVICE 12-month limited warranty (US) +1 (800) 988-7973 (UK) +44 (0) 1604 936200 (DE) +49 (0) 69 9579 7960 ( 中国 ) +86 400 0550 036 ( 日本 ) +81 03 4455 7823 (AU) +61 3 8331 4800 (Egypt) +20 8000000826 (UAE) +971 8000320817 (Kuwait) +965 22069086 (Saudi Arabia) +966 8008500030 (Middle East & Africa) +971 520750842 [email protected] Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong @EufyOfficial@EufyOfficial@EufyOfficial Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. 51005003795 V01 SAFETY The recommended temperature range for devices and accessories is 0°C to 40°C (32°F to 104°F) . Unless specifically indicated that it is safe to do so in the user guide or instruction manual, do not use this device in an environment that exceeds the recommended low or high temperature. Unless specifically indicated that it is safe to do so in the user guide or instruction manual, avoid exposing your device to direct sunshine or excessively wet environments. For pluggable equipment, the socket-outlet shall be easily accessible. Use only the adapter provided by the manufacturer. Using unauthorized adapters may cause danger and violate the authorized use of the device or the warranty article. CHILD SAFETY • THIS DEVICE IS NOT A TOY. • Choking Hazard: The product contains (or comes with) small parts, plastic elements, cables and parts that may cause choking hazard. Keep your camera and its accessories out of the reach of small children. Consult a physician immediately if small parts are swallowed. • Strangulation Hazard: Children get strangled in cords. Keep cords out of the reach of children (more than 3ft/0.9m away). NOTICE FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The devi…

Text truncated - open the document above for the full version.

AgentletterFCCattestationstatementAnkerInnovationsLimitedPage1of2 RF_753,Issue1 AnkerInnovationsLimited U.S.AgentDesignationforServiceofProcess (ApplicantandU.S.AgentareSeparateParties) TO: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 ATTENTION:FCCCertification–Section2.911(d)(7)Information DesignatedU.S.Agent Companyname: FantasiaTradingLLC FRN 0033423005 Contactpersonname: LouisQi Streetaddress: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 ZIP/City/State 91764/Ontario/CA Telephonenumber: +1(800)9887973 Emailaddress: [email protected] Signature: Date: 2023/05/22 Thisletteristoconfirmthatwe(“theDesignatedU.S.Agent)haveacceptedthe responsibilitytoactastheDesignatedU.S.AgentforServiceofProcessasrequiredby section47CFR2.911(d)(7)onbehalfoftheApplicantnotedbelow. TheApplicantacknowledgesthattheymustmaintainanagentfornolessthanoneyear afterterminatingallmarketingandimportationORtheconclusionofanyCommission- relatedproceedinginvolvingtheequipment. Theapplicantfurtheracknowledgestheir responsibilitytoinformtheFCCwhenevertheDesignatedU.S.Agentinformationabove changes. Applicant Companyname: AnkerInnovationsLimited GranteeCode: 2AOKB AgentletterFCCattestationstatementAnkerInnovationsLimitedPage2of2 RF_753,Issue1 AnkerInnovationsLimited Contactpersonname: LouisQi Streetaddress: Room 1318-19, Hollywood Plaza, 610 Nathan Road,Mongkok ZIP/City/State Kowloon Telephonenumber: +86-755-86544807 Emailaddress: [email protected] Signature: Date: 2023/05/22

CoveredlistattestationFCCapplicationletterKiwaPage 1 of2 RF_755_01 AnkerInnovationsLimited CertificationApplicationAttestationStatements AnkerInnovationsLimited Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon,HongKong Hongkong China ToWhomItMayConcern: Statementfor47CFRsection2.911(d)(5)(i) AnkerInnovationsLimitedcertifiesthatasofthedateoftheapplicationtheequipmentforwhichauthorizationis soughtisnot“covered”equipment 1 prohibitedfromreceivinganequipmentauthorizationpursuanttosection 2.903oftheFCCrules. Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedbyanyoftheentitiesidentifiedonthe currentCoveredList,includingaffiliatesorsubsidiariesofthenamedcompanies,theapplicantmustincludean explanationonwhytheequipmentisnot“covered”equipment. AdditionalExplanation: <N/A> Statementfor47CFRsection2.911(d)(5)(ii) AnkerInnovationsLimited(“theapplicant”)certifiesthat,asofthedateofthefilingofthisapplication, theapplicant -is/-isnot (3) identifiedontheCoveredListasanentityproducing“covered”equipment. 1 -The Commission’sCovered Listis published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment.https://www.fcc.gov/supplychain/coveredlist . (2): For FCC it must be the Grantee Code “owner” or the authorized agent. (3): double click on the appropriate box and select ‘’checked” then “OK” Date: 2023/05/22 City: HongKong Name (2) : LouisQi Function: ComplianceManager Telephonenumber: +86-755-86544807 Emailaddress: [email protected] CoveredlistattestationFCCapplicationletterKiwaPage 2 of2 RF_755_01 AnkerInnovationsLimited Signature:

AnkerInnovationsLimited Date:2023/05/23 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 ToWhomItMayConcern: TheAnkerInnovationsLimited,theundersigned,herebyauthorizesMrs.Wendy ZhanfromShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,toactonthe behalfoftheAnkerInnovationsLimitedsolelyinmattersrelatingtotheapplication foranFCCequipmentauthorizationforFCCID:2AOKB-T8416includingthe signingofdocumentsinconnectionwiththisApplication.Necessaryactscarriedout ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.onourbehalfoftheAnker InnovationsLimitedinconnectionwiththeApplicationshallhavethesameeffectas actsoftheAnkerInnovationsLimited.AnkerInnovationsLimitedalsoherebycertify thatnopartytothisapplicationissubjecttoadenialofbenefits,includingFCC benefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C. 862. Thankyouforyourattentiontothismatter. YoursSincerely, Signatory: Contactname:LouisQi Tel:+86-755-86544807 Email:[email protected] Companyname:AnkerInnovationsLimited

AnkerInnovationsLimited Date:2023/05/23 To:FederalCommunicationsCommission,Authorization&EvaluationDivision,7435Oakland MillsRoad,Columbia,MD21046 Re:RequestofConfidentialityforFCCID:2AOKB-T8416 ToWhomitmayconcern: Pursuanttosections0.457and0.459ofCommission’sRules(CFR47),andSection552(b)(4)of theFreedomofInformationAct,ShenzhenChainwayInformationTechnologyCo.,Ltd.hereby requestsconfidentialityandtreatmentofcertaininformationaccompanyingthisapplication.The materialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothe public.ThepublicdisclosureofthesemattersmightbeharmfultotheApplicantandprovide unjustifiedbenefitstoitscompetitors. WearealsoherebyrequestShort-TermConfidentialityfor180daysfromgrantdateasoutlined inPublicNoticeDA04-1705.ThisprovisionwillgiveShenzhenChainwayInformation TechnologyCo.,Ltd.temporaryconfidentialityofcommerciallysensitiveinformationpriorto productrelease. TherequestedPermanentandShort-TermConfidentialexhibitsarelistedasfollows: PERMANENTANDSHORT-TERMCONFIDENTIALLIST ExhibitDescription PERMANENT 1BlockDiagram 2OperationalDescription 3Schematics 4BOM SHORT-TERM 5ExternalPhotos 6InternalPhotos 7Test-SetupPhotos 8UserManual TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateof theGrantforthisapplication. Signatory： Contactname:LouisQi Tel:+86-755-86544807 Email:[email protected] Companyname:AnkerInnovationsLimited

AnkerInnovationsLimited UNIIDeclarationLetter WehavedeclaredbelowfeaturedforFCCequipmentauthorization,deviceFCCID:2AOKB-T8416 (1)DFSDevice--Master,ClientwithRadardetectioncapability, Clientwithoutradardetectioncapability,N/A (2)Active/PassiveScanning,adhocmodeaccesspointcapability FrequencyBand (MHz) ActiveScanning (thedevicecan transmitaprobe (beacon)) Passivescanning (wherethedeviceis canlistenonlywith noprobes) AdHocMode capability Accesspoint capability 2412–2462MHzYes,NoYes,NoYes,NoYes,No 2422–2452MHzYes,NoYes,NoYes,NoYes,No 5745–5825MHzYes,NoYes,NoYes,NoYes,No 5755–5795MHzYes,NoYes,NoYes,NoYes,No 5180–5240MHzYes,NoYes,NoYes,NoYes,No 5190–5230MHzYes,NoYes,NoYes,NoYes,No 5260–5320MHzYes,NoYes,NoYes,NoYes,No 5270–5310MHzYes,NoYes,NoYes,NoYes,No 5500–5700MHzYes,NoYes,NoYes,NoYes,No 5510–5670MHzYes,NoYes,NoYes,NoYes,No (3)Countrycodeselectionability-Yes,No Ifno,plsexplainhowwasimplemented:CountryisselectedasUSbydefaultandusercannotchangethecountry code. (4)Meet15.202requirement-Yes,No, plscheckbelow: Amasterdeviceisdefinedasadeviceoperatinginamodeinwhichithasthecapabilitytotransmitwithout receivinganenablingsignal.Inthismodeitisabletoselectachannelandinitiateanetworkbysendingenabling signalstootherdevices Aclientdeviceisdefinedasadeviceoperatinginamodeinwhichthetransmissionsofthedeviceareunder controlofthemaster.Adeviceinclientmodeisnotabletoinitiateanetwork. (5)Forclientdevicesthathavesoftwareconfigurationcontroltooperateindifferentmodes(activescanninginsome andpassivescanninginothers)indifferentbands(deviceswithmultipleequipmentclassesorthosethatoperateon non-DFSfrequencies)ormodulardeviceswhichconfigurethemodesofoperationsthroughsoftware,theapplication mustprovidesoftwareandoperationsdescriptiononhowthesoftwareand/orhardwareisimplementedtoensure thatproperoperationsmodescannotbemodifiedbyenduseroraninstaller. Apply,NoApply, (Ifapply,plshelptoprovideexplanationonhowitwasimplement(Byhardwareorsoftware,andhowsoftwarewas controlled) Thedeviceconfigurationcannotbemodifiedbyuserasprogramisnotexposedtouserbyanymeans.Hardware doesnotallowUSBconnectionforuserwhichismusttochangetheconfiguration. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Signatory： Contactname:LouisQi Tel:+86-755-86544807 Email:[email protected] Companyname:AnkerInnovationsLimited

FCC ID: 2AOKB-T8416 IC: 23451-T8416 External Photos 1. EUT front view 2. EUT rear view 3. EUT left side view 4. EUT right side view 5. EUT top view 6. EUT bottom view 7.Accessories

1、 Label 2、 Label location(at the bottom)

FCC ID: 2AOKB-T8416 IC: 23451-T8416 Internal Photos 1. EUT uncover view 2. Antenna view Bluetooth/2.4G wifi/5G wifi Antenna

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 12 REPORT No.：SZ23030340S01 RF EXPOSURE EVALUATION REPORT APPLICANT : Anker Innovations Limited PRODUCT NAME : S350 Indoor Cam MODEL NAME : T8416 BRAND NAME : eufy SECURITY FCC ID : 2AOKB-T8416 STANDARD(S) : 47 CFR Part 2(2.1091) RECEIPT DATE : 2023-03-29 TEST DATE : 2023-04-27 to 2023-05-14 ISSUE DATE : 2023-05-24 Edited by: Zeng Xiaoying (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030340S01 Page 2 of 12 DIRECTORY 1. Technical Information ········································································································ 3 1.1 Applicant and Manufacturer Information ····································································· 3 1.2 Equipment under Test (EUT) Description ···································································· 3 1.3 Applied Reference Documents ····················································································· 4 2. Device Category and RF Exposure Limit ······································································· 5 3. RF Output Power ················································································································ 6 4. RF Exposure Assessment ······························································································ 11 Annex A Testing Laboratory Information ··········································································· 12 Change History Version Date Reason for change 1.0 2023-05-24 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030340S01 Page 3 of 12 1. Technical Information Note: Provide by applicant. 1.1 Applicant and Manufacturer Information Applicant: Anker Innovations Limited Applicant Address: Room 1318-19,Hollywood Plaza,610 Nathan Road,Mongkok,Kowloon,Hong Kong Manufacturer: Anker Innovations Limited Manufacturer Address: Room 1318-19,Hollywood Plaza,610 Nathan Road,Mongkok,Kowloon,Hong Kong 1.2 Equipment under Test (EUT) Description Product Name: S350 Indoor Cam Sample No.: 1# Hardware Version: T8416-MAIN-V04 Software Version: 1.3.1.1 Frequency Bands: Bluetooth 2402MHz-2480MHz WLAN 2.4GHz 2412MHz–2462MHz WLAN 5GHz 5180MHz-5240MHz 5260MHz-5320MHz 5500MHz-5720MHz 5745MHz-5825MHz Modulation Mode: Bluetooth GFSK WLAN 2.4GHz DSSS, OFDM, OFDMA WLAN 5GHz OFDM, OFDMA Antenna Type: PIFA Antenna Antenna Gain: Bluetooth 3.60dBi WLAN 2.4GHz 3.60dBi WLAN 5GHz 2.75dBi MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030340S01 Page 4 of 12 1.3 Applied Reference Documents Leading reference documents for testing: Identity Document Title Method Determination /Remark 47 CFR Part 2(2.1091) Radio Frequency Radiation Exposure Assessment: mobile devices No deviation KDB 447498 D01v06 General RF Exposure Guidance No deviation Note 1: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 2: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ23030340S01 Page 5 of 12 2. Device Category and RF Exposure Limit Per user manual, based on 47 CFR 2.1091, this device belongs to mobile device category with General Population/Uncontrolled exposure. Mobile Devices: 47 CFR 2.1091(b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. General Population/Uncontrolled Exposure: The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed o…

Text truncated - open the document above for the full version.

SPECIFICATION SPECIFICATION SHEETFORAPPROVAL （Revision：R：A0） CUSTOMER(客户名称) Anker CSP/N(客户机种) T8416T84X PARTNAME(品名) WIFIAntenna FREQUENCY(频率) 2.4-2.5GHz/5.15~5.85GHz ANTENNAMANUFACTURER(天线制造商) ShenzhenZTXCommunicationTechnologyCo.,Ltd ZTXNO.(物料编号) 2.00005876 DATE(日期) 2023-03-31 Remark( 备注 ) ： Sign(客户确认签字盖章)： 地址：深圳市宝安区石岩镇石龙大道34号(腾达工业园) 邮编：518000电话：0755-27588320 传真：0755-27588045http:// www.chinaztx.com CUSTOMER QA CHECKED ME CHECKED RF CHECKED MANAGER CHECKED MANAGER CHECKED MANAGER CHECKED ME CHECKED RF CHECKED LISTER QinleChangmingli ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page1of8 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna Revisionhistory EditionDateState A02023-03-31 editioprinceps ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page2of8 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna Index Revisionhistory 1 lndex 2 1MechanicalSpecification 3 1-1 MechanicalSpecification（T8416WIFIAntenna） 3 2 Testequipment 4 3TestResultsSurmmary 5 3-1 ActiveTest 5 3-2 VSWR 5 3-3 PassiveTest 5 ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page3of5 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna 1.MechanicalSpecification 1-1MechanicalConfiguration（T8416WIFIAntenna） ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page4of5 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna 2.Testequipment ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page5of5 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna 3.TestResultsSurmmary 3-1ActiveTest 3-2PassiveTest

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 190 REPORT No.：SZ23030340W03 TEST REPORT APPLICANT : Anker Innovations Limited PRODUCT NAME : S350 Indoor Cam MODEL NAME : T8416 BRAND NAME : eufy SECURITY FCC ID : 2AOKB-T8416 STANDARD(S) : 47 CFR Part 15 Subpart E RECEIPT DATE : 2023-03-29 TEST DATE : 2023-04-27 to 2023-05-14 ISSUE DATE : 2023-05-24 Edited by: Zeng Xiaoying (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 190 REPORT No.：SZ23030340W03 DIRECTORY 1. Summary of Test Result ················································································ 4 1.1. Testing Applied Standards ·········································································· 5 1.2. Test Equipment List ··················································································· 6 1.3. Measurement Uncertainty ··········································································· 8 1.4. Testing Laboratory ····················································································· 8 2. General Description ····················································································· 9 2.1. Information of Applicant and Manufacturer ··················································· 9 2.2. Information of EUT ····················································································· 9 2.3. Channel List of EUT ·················································································· 10 2.4. Test Configuration of EUT ·········································································· 11 2.5. Test Conditions ························································································ 11 2.6. Test Setup Layout Diagram ········································································ 12 3. Test Results ······························································································· 15 3.1. Antenna Requirement ··············································································· 15 3.2. Duty Cycle of Test Signal ··········································································· 16 3.3. Maximum Conducted Output Power ···························································· 17 3.4. Emission Bandwidth ················································································· 19 3.5. Peak Power Spectral Density ····································································· 21 3.6. Frequency Stability ··················································································· 22 3.7. Dynamic Frequency Selection ···································································· 23 3.8. Conducted Emission ················································································· 28 3.9. Restricted Frequency Bands ······································································ 29 3.10. Radiated Emission ···················································································· 31 Annex A Test Data and Result ·········································································· 33 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 190 REPORT No.：SZ23030340W03 Change History Version Date Reason for change 1.0 2023-05-24 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 190 REPORT No.：SZ23030340W03 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 ANSI C63.10 Duty Cycle of the Test Signal May 04, 2023 Su Xiaoxian PASS No deviation 3 15.407(a) Maximum Conducted Output Power May 04, 2023 Su Xiaoxian PASS No deviation 4 15.407(a) (e) Emission Bandwidth May 04, 2023 Su Xiaoxian PASS No deviation 5 15.407(a) Peak Power Spectral Density May 04, 2023 Su Xiaoxian PASS No deviation 6 15.407(g) Frequency Stability May 11, 2023 Su Xiaoxian PASS No deviation 7 15.407(h) DFS May 04, 2023 Su Xiaoxian PASS No deviation 8 15.207 Conducted Emission Apr. 27, 2023 Fan Zehang PASS No deviation 9 15.407(b) Restricted Frequency Bands May 11, 2023 Gao Jianrou PASS No deviation 10 15.407(b) Radiated Emission May 12&14, 2023 Gao Jianrou PASS No deviation Note 1: The tests of Conducted Emission and Radiated Emission were performed according to the method of measurements prescribed in ANSI C63.102013. Note 2: These RF tests were performed according to the method of measurements prescribed in KDB789033 D02 v02r01. Note 3: These RF tests were performed according to the method of measurements prescribed in KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02. Note 4: Additions to, dev…

Text truncated - open the document above for the full version.

MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 71 of 190 REPORT No.：SZ23030340W03 -26dB Bandwidth NVNT ax20 5580MHz Ant1 -26dB Bandwidth NVNT ax20 5600MHz Ant1 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 72 of 190 REPORT No.：SZ23030340W03 -26dB Bandwidth NVNT ax20 5720MHz Ant1 -26dB Bandwidth NVNT ax40 5190MHz Ant1 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 73 of 190 REPORT No.：SZ23030340W03 -26dB Bandwidth NVNT ax40 5230MHz Ant1 -26dB Bandwidth NVNT ax40 5270MHz Ant1 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 74 of 190 REPORT No.：SZ23030340W03 -26dB Bandwidth NVNT ax40 5310MHz Ant1 -26dB Bandwidth NVNT ax40 5510MHz Ant1 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 75 of 190 REPORT No.：SZ23030340W03 -26dB Bandwidth NVNT ax40 5550MHz Ant1 -26dB Bandwidth NVNT ax40 5630MHz Ant1 MORLAB Shenzhen…

Text truncated - open the document above for the full version.