2AOKB-T8416CIndoor Cam S350

Anker Innovations Limited To: Federal Communications Commission Date: 2024/08/26 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Anker Innovations Limited (“the applicant”) certifies that th e equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Anker Innovations Limited (“the applicant”) certifies that, as of the da te of the fil ing of the application, the applicant is not identified on the Cove red List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: Indoor Cam S350 FCC ID: 2AOKB-T8416C If you hav e any questions, please feel free to contact me Contact Person: Louis Qi Position in the Company: Compliance Manager Date of Signature: 2024/08/26 ___________________________ Signatory (signature of the applicant)

Anker Innovations Limited Date:2024/08/26 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern: The Anker Innovations Limited, the undersigned, hereby authorizes Mrs. Wendy Zhan from Shenzhen Morlab Communications Technology Co., Ltd., to act on the behalf of the Anker Innovations Limited solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AOKB-T8416C including the signing of documents in connection with this Application. Necessary acts carried out Shenzhen Morlab Communications Technology Co., Ltd. on our behalf of the Anker Innovations Limited in connection with the Application shall have the same effect as acts of the Anker Innovations Limited. Anker Innovations Limited also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Thank you for your attention to this matter. Yours Sincerely, Signatory: Contact name: Louis Qi Tel: +86-755-86544807 Email: [email protected] Company name: Anker Innovations Limited

Anker Innovations Limited Date: 2024/08/26 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 Re: Request of Confidentiality for FCC ID: 2AOKB-T8416C To Whom it may concern: Pursuant to sections 0.457 and 0.459 of Commission’s Rules (CFR 47), and Section 552(b)(4) of the Freedom of Information Act, Anker Innovations Limited. hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short-Term Confidentiality for 180 days from grant date as outlined in Public Notice DA04-1705. This provision will give Anker Innovations Limited. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Short-Term Confidential exhibits are listed as follows: PERMANENT AND SHORT-TERM CONFIDENTIAL LIST Exhibit Description PERMANENT 1 Block Diagram 2 Operational Description 3 Schematics 4 BOM SHORT-TERM 5 External Photos 6 Internal Photos 7 Test-Setup Photos 8 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Signatory： Contact name: Louis Qi Tel: +86-755-86544807 Email: [email protected] Company name: Anker Innovations Limited

Anker Innovations Limited UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AOKB-T8416C (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) Passive scanning (where the device is can listen only with no probes) Ad Hoc Mode capability Access point capability 2412 – 2462 MHz Yes, No Yes, No Yes, No Yes, No 2422 – 2452 MHz Yes, No Yes, No Yes, No Yes, No 5745 – 5825 MHz Yes, No Yes, No Yes, No Yes, No 5755 – 5795 MHz Yes, No Yes, No Yes, No Yes, No 5180 – 5240 MHz Yes, No Yes, No Yes, No Yes, No 5190 – 5230 MHz Yes, No Yes, No Yes, No Yes, No 5260 – 5320 MHz Yes, No Yes, No Yes, No Yes, No 5270 – 5310 MHz Yes, No Yes, No Yes, No Yes, No 5500 – 5700 MHz Yes, No Yes, No Yes, No Yes, No 5510 – 5670 MHz Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : Country is selected as US by default and user can not change the country code. (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The device configuration can not be modified by user as program is not exposed to user by any means. Hardware does not allow USB connection for user which is must to change the configuration. If you have any questions, please feel free to contact me at the address shown below. Signatory： Contact name: Louis Qi Tel: +86-755-86544807 Email: [email protected] Company name: Anker Innovations Limited

贴纸：

NOTE: This document is issued byShenzhenMorlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 8 REPORT No.：SZ24060311S01 RF EXPOSURE EVALUATION REPORT APPLICANT : Anker Innovations Limited PRODUCT NAME : Indoor Cam S350 MODEL NAME : T8416 BRAND NAME : eufy SECURITY FCC ID :2AOKB-T8416C STANDARD(S) : 47 CFR Part 2(2.1091) RECEIPT DATE : 2024-07-24 TEST DATE : 2024-08-04 to 2024-08-20 ISSUE DATE : 2024-08-26 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24060311S01 Page2of 8 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1 Applicant and Manufacturer Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2 Equipment under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.3 Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2. Device Category and RF Exposure Limit ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 3. Maximum Average Power Summary ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 4. RF Exposure Assessment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 Annex A Testing Laboratory Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8 Change History Version Date Reason for change 1.0 2024-08-26 First edition MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24060311S01 Page3of 8 1. Technical Information Note: Provide by applicant. 1.1 Applicant and Manufacturer Information Applicant: Anker Innovations Limited Applicant Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Manufacturer: Anker Innovations Limited Manufacturer Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong 1.2 Equipment under Test (EUT) Description Product Name: Indoor Cam S350 Sample No.: 1# Hardware Version: T8416-MAIN-V04 Software Version: 1.3.1.15 Frequency Bands: Bluetooth 2402MHz-2480MHz WLAN 2.4GHz 2412MHz-2462MHz WLAN 5GHz 5180MHz-5240MHz; 5260MHz-5320MHz; 5500MHz-5720MHz; 5745MHz-5825MHz Modulation Mode: Bluetooth GFSK WLAN 2.4GHz DSSS, OFDM, OFDMA WLAN 5GHz OFDM, OFDMA Antenna Information: Bluetooth Antenna Type: PIFA Antenna Antenna Gain: 3.6dBi WLAN 2.4GHz Antenna Type: PIFA Antenna Antenna Gain: 3.6dBi WLAN 5GHz Antenna Type: PIFA Antenna Antenna Gain: 2.75dBi MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24060311S01 Page4of 8 1.3 Applied Reference Documents Leading reference documents for testing: Identity Document Title Method Determination /Remark 47 CFR Part 2(2.1091) Radio Frequency Radiation Exposure Assessment: mobile devices No deviation KDB 447498 D01v06 General RF Exposure Guidance No deviation Note 1: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 2: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24060311S01 Page5of 8 2. Device Category and RF Exposure Limit Per user manual, based on 47 CFR 2.1091, this device belongs to mobile device category with General Population/Uncontrolled exposure. Mobile Devices: 47 CFR 2.1091(b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. General Population/Uncontrolled Exposure: The general population/uncontrolled exposure limits are …

Text truncated - open the document above for the full version.

SPECIFICATION SPECIFICATION SHEETFORAPPROVAL （Revision：R：A0） CUSTOMER(客户名称) Anker CSP/N(客户机种) T8416T84X PARTNAME(品名) WIFIAntenna FREQUENCY(频率) 2.4-2.5GHz/5.15~5.85GHz ANTENNAMANUFACTURER(天线制造商) ShenzhenZTXCommunicationTechnologyCo.,Ltd ZTXNO.(物料编号) 2.00005876 DATE(日期) 2023-03-31 Remark( 备注 ) ： Sign(客户确认签字盖章)： 地址：深圳市宝安区石岩镇石龙大道34号(腾达工业园) 邮编：518000电话：0755-27588320 传真：0755-27588045http:// www.chinaztx.com CUSTOMER QA CHECKED ME CHECKED RF CHECKED MANAGER CHECKED MANAGER CHECKED MANAGER CHECKED ME CHECKED RF CHECKED LISTER QinleChangmingli ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page1of8 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna Revisionhistory EditionDateState A02023-03-31 editioprinceps ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page2of8 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna Index Revisionhistory 1 lndex 2 1MechanicalSpecification 3 1-1 MechanicalSpecification（T8416WIFIAntenna） 3 2 Testequipment 4 3TestResultsSurmmary 5 3-1 ActiveTest 5 3-2 VSWR 5 3-3 PassiveTest 5 ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page3of5 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna 1.MechanicalSpecification 1-1MechanicalConfiguration（T8416WIFIAntenna） ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page4of5 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna 2.Testequipment ANTENNASPECIFICATION ApplicationDate:Mar,31,2023 Editor: Rev:R:A0 Page5of5 CUSP/N:T8416WIFIAntenna ZTXP/N:T8416WIFIAntenna 3.TestResultsSurmmary 3-1ActiveTest 3-2PassiveTest

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 69 REPORT No.：SZ24060311W01 TEST REPORT APPLICANT : Anker Innovations Limited PRODUCT NAME : Indoor Cam S350 MODEL NAME : T8416 BRAND NAME : eufy SECURITY FCC ID :2AOKB-T8416C STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2024-07-24 TEST DATE : 2024-08-04 to 2024-08-20 ISSUE DATE : 2024-08-26 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 69 REPORT No.：SZ24060311W01 DIRECTORY 1. Summary of Test Result ·············································································· 4 1.1. Testing Applied Standards ········································································ 5 1.2. Test Equipment List ················································································· 6 1.3. Measurement Uncertainty ········································································· 8 1.4. Testing Laboratory ··················································································· 8 2. General Description ··················································································· 9 2.1. Information of Applicant and Manufacturer ················································· 9 2.2. Information of EUT ··················································································· 9 2.3. Channel List of EUT ··············································································· 10 2.4. Test Configuration of EUT ······································································· 11 2.5. Test Conditions ····················································································· 11 2.6. Test Setup Layout Diagram ····································································· 11 3. Test Results ···························································································· 14 3.1. Antenna Requirement ············································································ 14 3.2. Duty Cycle of Test Signal ········································································ 15 3.3. Maximum Peak Conducted Output Power ················································· 16 3.4. Maximum Average Conducted Output Power ············································ 17 3.5. 6 dB Bandwidth ····················································································· 18 3.6. Conducted Spurious Emissions and Band Edge ········································ 19 3.7. Power Spectral Density ·········································································· 20 3.8. Conducted Emission ·············································································· 21 3.9. Restricted Frequency Bands ··································································· 22 3.10. Radiated Emission ················································································· 23 Annex A Test Data and Result ······································································· 25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 69 REPORT No.：SZ24060311W01 Change History Version Date Reason for change 1.0 2024-08-26 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 69 REPORT No.：SZ24060311W01 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 N/A Duty Cycle of Test Signal Aug. 13, 2024 Li Xinpeng PASS No deviation 3 15.247(b) Maximum Peak Conducted Output Power Aug. 13, 2024 Li Xinpeng PASS No deviation 4 15.247(b) Maximum Average Conducted Output Power Aug. 13, 2024 Li Xinpeng PASS No deviation 5 15.247(a) Bandwidth Aug. 13, 2024 Li Xinpeng PASS No deviation 6 15.247(d) Conducted Spurious Emission and Band Edge Aug. 13, 2024 Li Xinpeng PASS No deviation 7 15.247(e) Power Spectral Density Aug. 13, 2024 Li Xinpeng PASS No deviation 8 15.207 Conducted Emission Aug. 04, 2024 Fan Shengquan PASS No deviation 9 15.247(d) Restricted Frequency Bands Aug. 19 to 20, 2024 Li Hanbin PASS No deviation 10 15.209, 15.247(d) Radiated Emission Aug. 19 to 20, 2024 Li Hanbin PASS No deviation Note 1: The tests were performed according to the method of measurements prescribed in ANSI C63.10-2013 and KDB 558074 D01 v05r02. Note 2: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 3: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confide…

Text truncated - open the document above for the full version.

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 119 REPORT No.：SZ24060311W02 TEST REPORT APPLICANT : Anker Innovations Limited PRODUCT NAME : Indoor Cam S350 MODEL NAME : T8416 BRAND NAME : eufy SECURITY FCC ID :2AOKB-T8416C STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2024-07-24 TEST DATE : 2024-08-04 to 2024-08-20 ISSUE DATE : 2024-08-26 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 119 REPORT No.：SZ24060311W02 DIRECTORY 1. Summary of Test Result ·············································································· 4 1.1. Testing Applied Standards ········································································ 5 1.2. Test Equipment List ················································································· 6 1.3. Measurement Uncertainty ········································································· 8 1.4. Testing Laboratory ··················································································· 8 2. General Description ··················································································· 9 2.1. Information of Applicant and Manufacturer ················································· 9 2.2. Information of EUT ··················································································· 9 2.3. Channel List of EUT ··············································································· 10 2.4. Test Configuration of EUT ······································································· 11 2.5. Test Conditions ····················································································· 11 2.6. Test Setup Layout Diagram ····································································· 12 3. Test Results ···························································································· 15 3.1. Antenna Requirement ············································································ 15 3.2. Duty Cycle of Test Signal ········································································ 16 3.3. Maximum Peak and Average Conducted Output Power ······························· 17 3.4. 6 dB Bandwidth ····················································································· 18 3.5. Conducted Spurious Emissions and Band Edge ········································ 19 3.6. Power Spectral Density ·········································································· 20 3.7. Conducted Emission ·············································································· 21 3.8. Restricted Frequency Bands ··································································· 22 3.9. Radiated Emission ················································································· 23 Annex A Test Data and Result ······································································· 25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 119 REPORT No.：SZ24060311W02 Change History Version Date Reason for change 1.0 2024-08-26 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 119 REPORT No.：SZ24060311W02 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 N/A Duty Cycle of Test Signal Aug. 13, 2024 Li Xinpeng PASS No deviation 3 15.247(b) Maximum Peak Conducted Output Power Aug. 13, 2024 Li Xinpeng PASS No deviation 4 15.247(b) Maximum Average Conducted Output Power Aug. 13, 2024 Li Xinpeng PASS No deviation 5 15.247(a) Bandwidth Aug. 13, 2024 Li Xinpeng PASS No deviation 6 15.247(d) Conducted Spurious Emission and Band Edge Aug. 13, 2024 Li Xinpeng PASS No deviation 7 15.247(e) Power Spectral Density Aug. 13, 2024 Li Xinpeng PASS No deviation 8 15.207 Conducted Emission Aug. 04, 2024 Fan Shengquan PASS No deviation 9 15.247(d) Restricted Frequency Bands Aug. 19 to 20, 2024 Li Hanbin PASS No deviation 10 15.209, 15.247(d) Radiated Emission Aug. 19 to 20, 2024 Li Hanbin PASS No deviation Note 1: The tests were performed according to the method of measurements prescribed in ANSI C63.10-2013 and KDB 558074 D01 v05r02. Note 2: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 3: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, F…

Text truncated - open the document above for the full version.