2AOKB-T8531eufy Security Video Smart Lock E330

010203040506 QUICK START GUIDE eufy Security Video Smart Lock E330 SETTING UP THE SYSTEM 1. Download and install the eufy Security app, then sign up for an account. 2. Follow the in-app instructions to add the Video Smart Lock E330 to your device list. For online support, tutorial videos, FAQs, and more information, please visit http:// support.eufy.com/s/ Scan the QR code to read the detailed user guide. NOTICE Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for the product is -10°C to 50°C for the interior lock( Charging mode is 0-45°C) , and -30°C to 70°C for the exterior lock. When supplying, please place the device in an environment that has a normal room temperature and good ventilation. It is recommended to supply the device in an environment with a temperature that ranges from 5°C - 25°C (41°F - 77°F). The equipment is only suitable for mounting at heights ≤ 2 m. Do not use the product in any way other than described herein in order to avoid personal injury or property damage. User should comply with the laws and regulations of the corresponding countries and regions where the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our products or equipment for any illegal purposes. Our company will not be responsible for any violators' legal liability under any circumstances. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. Warning • replacement of a battery with an incorrect type that can defeat a safeguard; • disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; • leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and • a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas. Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners. Model: T8531 5100500XXXX V01 CAUTION! THERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY TYPE IS USED. DISPOSE OF USED BATTERIES ACCORDING TO THEIR INSTRUCTIONS. FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help. FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. The following importer is the responsible party Company Name: POWER MOBILE LIFE, LLC Address: 10900 NE 8th St, Ste 501, Bellevue WA 98004 Telephone:1-800-988-7973 IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. IC RF Statement: When using the product, maintain a distance of 20cm from the body to ensure compliance with RF exposure requirements. Lors de l'utilisation du produit, maint…

Text truncated - open the document above for the full version.

CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 2023-10-10 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2AOKB-T8531 Anker Innovations Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Anker Innovations Limited (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Louis Qi Title: Manager Company Name& Address: Anker Innovations Limited & Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong

U.S. AGENT LETTER OF ATTESTATION Date: 2023-10-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID:2AOKB-T8531 Anker Innovations Limited (“the Applicant”) certifies that, as of the date of the filing of the application, Fantasia Trading LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Anker Innovations Limited (“the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Fantasia Trading LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 FRN: 0033423005 Tel.: +1 (800)988 7973 Email: [email protected] Signed by (printed name): Louis Qi Signature: Applicant: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong FRN: 0027073105 Tel: +86-755-86544807 Email: [email protected] Signed by (printed name): Louis Qi Signature:

Anker Innovations Limited Add: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong Tel: +86-755-86544807 Email: [email protected] Attestation Letter Date: 2023-10-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: Our product eufy Security Video Smart Lock E330, m odel: T8531, FCC ID:2AOKB-T8531,for marketing purpose, this product only supports BLE 1M.2.4G WiFi(2412-2462MHz,802.11b/g/n ht20 modes), SRD(24059-24240MHz),The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Printed Name: Louis Qi Title: Manager

QA-FR-170-B Anker Innovations Limited Add: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong Tel: +86-755-86544807 Email: [email protected] FCC Authorization Date: 2023-10-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Anker Innovations Limited, Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Louis Qi Title: Manager

QA-F R-172-A Anker Innovations Limited Add: Room 1318-19, Hollywood Plaza 610 Nathan Road, Mongkok Kowloon Hong Kong Tel: +86-755-86544807 Email: [email protected] FCC Confidential Authorization Date: 202 3-10-10 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AOKB-T8531 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Anker Innovations Limited hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagra m Sch emati cs O peration Descriptio n As w ell as short-term (secrecy cycle:180 days) confidential treatment of information accompanying this application as outlined below: Internal Ph otos User’ s Manu al Ex ternal Phot os Test Set -up Phot os Th e above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Printed Name: Louis Qi Title: Manager

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-EXP Page 1 of 6 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-EXP Page 2 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-EXP Page 3 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-EXP Page 4 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-EXP Page 5 of 6 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-EXP Page 6 of 6

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 1 of 17 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 2 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 3 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 4 of 17 BLE Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 5 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 6 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 7 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 8 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 9 of 17 Radar Chip&Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 10 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 11 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 12 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 13 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 14 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 15 of 17 WIFI Antenna China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 16 of 17 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-INP Page 17 of 17

MAXIMUM PERMISSIBLE EXPOSURE EVALUATION REPORT Applicant: Anker Innovations Limited Address: Room 1318-19,Hollywood Plaza,610 Nathan Road, Mongkok, Kowloon, Hong Kong FCC ID: 2AOKB-T8531 IC: 23451-T8531 HVIN: T8531 Product Name: eufy Security Video Smart Lock E330 Standard(s): 47 CFR §1.1310, 47 CFR §2.1091, 47 CFR §15.247(i),47 CFR §15.407(f) RSS-102 Issue 5 March 2015,Amendment 1 (February 2, 2021) The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230951436-00E Date Of Issue: 2023/10/11 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00E Page 2 of 7 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00E Page 3 of 7 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 CR230951436-00E Original Report 2023/10/11 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00E Page 4 of 7 1. SUMMARY OF TEST RESULTS Standard(s)/Rule(s) Description of Test Result §15.247 (i) & §1.1310 & §2.1091 Maximum Permissible Exposure (MPE) Compliant RSS-102 Clause 2.5.2 Exemption Limits For Routine Evaluation- RF Exposure Evaluation Compliant China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00E Page 5 of 7 2. RF EXPOSURE EVALUATION 2.1 §15.407 (f) & §1.1310 & §2.1091-Maximum Permissible Exposure (MPE) 2.1.1 Applicable Standard According to subpart 15.247(i)and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. 2.1.2 Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00E Page 6 of 7 2.1.3 Calculated Data: Mode Frequency (MHz) Antenna Gain Conducted output power including Tune- up Tolerance Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) BLE 2402-2480 -0.07 0.986.54.4720.00 0.0009 1.0 2.4G Wifi 2412-2462 3.95 2.48 24 251.19 20.00 0.1242 1.0 Radar* 24059- 24240 2 1.58 -0.580.82 20.00 0.0003 1.0 Note: *:Radar the field strength is 96.62dBμV/m@3m = 1.42dBm EIRP E[dBμV/m] = EIRP[dBm] + 95.2 for d = 3 m Conducted output power : EIRP[dBm]-Gain[dBi]=1.42-2=-0.58 dBm The Conducted Power including Tune-up Tolerance and EIRP(Radar) was declared by manufacturer For Simultaneous transmission: BLE/2.4G WiFi / Radar can transmit simultaneously: = S BLE /S limit- BLE +S 2.4G WiFi /S limit- 2.4G WiFi + S Radar /S limit- Radar =0.0009/1+0.1242/1+0.0003/1 =0.1254 < 1.0 Result: The device meet FCC MPE at 20 cm distance China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00E Page 7 of 7 2.2 Exemption limits for Routine Evaluation –RF Exposure Evaluation 2.2.1 Applicable Standard According to RSS-102 § (2.5.2): RF exposure evaluation is required if the separation distance between the user and/or bystander and the device’s radiating element is greater than 20 cm, except when the device operates as follows: • below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 1 W (adjusted for tune-up tolerance); • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less than 4.49/ƒ 0.5 W (adjusted for…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Anker Innovations Limited Address: Room 1318-19,Hollywood Plaza,610 Nathan Road, Mongkok, Kowloon, Hong Kong FCC ID: 2AOKB-T8531 IC: 23451-T8531 HVIN: T8531 Product Name: eufy Security Video Smart Lock E330 Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230951436-00A Date Of Issue: 2023/10/10 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00A Page 2 of 45 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00A Page 3 of 45 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 7 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 8 2. SUMMARY OF TEST RESULTS ............................................................................................ 9 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 10 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 10 3.1.1 Applicable Standard ..................................................................................................................................... 10 3.1.2 EUT Setup.................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 12 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup.................................................................................................................................................... 14 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 15 3.2.4 Test Procedure ............................................................................................................................................. 16 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 16 3.3 6 DB EMISSION BANDWIDTH: ............................................................................................................ 17 3.3.1 Ap…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Anker Innovations Limited Address: Room 1318-19,Hollywood Plaza,610 Nathan Road, Mongkok, Kowloon, Hong Kong FCC ID: 2AOKB-T8531 IC: 23451-T8531 HVIN: T8531 Product Name: eufy Security Video Smart Lock E330 Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230951436-00B Date Of Issue: 2023/10/11 Reviewed By: Julie Tan Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00B Page 2 of 54 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230951436-00B Page 3 of 54 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 13 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ...........................................................................................…

Text truncated - open the document above for the full version.