2AOKB-T85F1eufy Smart Lock E30

Anker Innovations Limited To: Federal Communications Commission Date: 2024/08/01 7435 Oakland Mills Road Columbia, MD 21046 USA Attestation Section 2.911(d)(5)(i) and Section 2.911(d)(5)(ii) (KDB 986446 D01 Covered Equipment) Section 2.911(d)(5)(i) Anker Innovations Limited (“the applicant”) certifies that th e equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Section 2.911(d)(5)(ii) Anker Innovations Limited (“the applicant”) certifies that, as of the da te of the fil ing of the application, the applicant is not identified on the Cove red List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Type of Equipment subject to FCC Certification: eufy Smart Lock E31 FCC ID: 2AOKB-T85F1 If you hav e any questions, please feel free to contact me Contact Person: Louis Qi Position in the Company: Compliance Manager Date of Signature: 2024/08/01 ___________________________ Signatory (signature of the applicant)

AgentletterFCCattestationstatementAnkerInnovationsLimitedPage1of2 RF_753,Issue1 AnkerInnovationsLimited U.S.AgentDesignationforServiceofProcess (ApplicantandU.S.AgentareSeparateParties) TO: FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 ATTENTION:FCCCertification–Section2.911(d)(7)Information DesignatedU.S.Agent Companyname: FantasiaTradingLLC FRN 0033423005 Contactpersonname: LouisQi Streetaddress: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 ZIP/City/State 91764/Ontario/CA Telephonenumber: +1(800)9887973 Emailaddress: [email protected] Signature: Date: 2024/08/01 Thisletteristoconfirmthatwe(“theDesignatedU.S.Agent)haveacceptedthe responsibilitytoactastheDesignatedU.S.AgentforServiceofProcessasrequiredby section47CFR2.911(d)(7)onbehalfoftheApplicantnotedbelow. TheApplicantacknowledgesthattheymustmaintainanagentfornolessthanoneyear afterterminatingallmarketingandimportationORtheconclusionofanyCommission- relatedproceedinginvolvingtheequipment. Theapplicantfurtheracknowledgestheir responsibilitytoinformtheFCCwhenevertheDesignatedU.S.Agentinformationabove changes. Applicant Companyname: AnkerInnovationsLimited GranteeCode: 2AOKB FCC ID: 2AOKB-T85F1 FRN: 0027073105 AgentletterFCCattestationstatementAnkerInnovationsLimitedPage2of2 RF_753,Issue1 AnkerInnovationsLimited Contactpersonname: LouisQi Streetaddress: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong ZIP/City/State Hong Kong Telephonenumber: +86-755-86544807 Emailaddress: [email protected] Signature: Date: 2024/08/01

AnkerInnovationsLimited Date:2024/07/30 To:FederalCommunicationsCommission, Authorization&EvaluationDivision, 7435OaklandMillsRoad, Columbia,MD21046 ToWhomItMayConcern: TheAnkerInnovationsLimited,theundersigned,herebyauthorizesMrs.WendyZhan fromShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,toactonthebehalfof theAnkerInnovationsLimitedsolelyinmattersrelatingtotheapplicationforanFCC equipmentauthorizationforFCCID:2AOKB-T85F1includingthesigningofdocuments inconnectionwiththisApplication.NecessaryactscarriedoutShenzhenMorlab CommunicationsTechnologyCo.,Ltd.onourbehalfoftheAnkerInnovationsLimited inconnectionwiththeApplicationshallhavethesameeffectasactsoftheAnker InnovationsLimited.AnkerInnovationsLimitedalsoherebycertifythatnopartytothis applicationissubjecttoadenialofbenefits,includingFCCbenefits,pursuanttoSection 5301oftheAnti-DrugAbuseActof1988,21U.S.C.862. Thankyouforyourattentiontothismatter. YoursSincerely, Signatory: Contactname:LouisQi Tel:+86-755-86544807 Email:[email protected] Companyname:AnkerInnovationsLimited

AnkerInnovationsLimited Date:2024/07/30 To:FederalCommunicationsCommission,Authorization&EvaluationDivision,7435OaklandMills Road,Columbia,MD21046 Re:RequestofConfidentialityforFCCID:2AOKB-T85F1 ToWhomitmayconcern: Pursuanttosections0.457and0.459ofCommission’sRules(CFR47),andSection552(b)(4)of theFreedomofInformationAct,ShenzhenChainwayInformationTechnologyCo.,Ltd.herebyrequests confidentialityandtreatmentofcertaininformationaccompanyingthisapplication.Thematerialscontain tradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic.Thepublicdisclosure ofthesemattersmightbeharmfultotheApplicantandprovideunjustifiedbenefitstoitscompetitors. WearealsoherebyrequestShort-TermConfidentialityfor180daysfromgrantdateasoutlinedin PublicNoticeDA04-1705.ThisprovisionwillgiveShenzhenChainwayInformationTechnologyCo., Ltd.temporaryconfidentialityofcommerciallysensitiveinformationpriortoproductrelease. TherequestedPermanentandShort-TermConfidentialexhibitsarelistedasfollows: PERMANENTANDSHORT-TERMCONFIDENTIALLIST ExhibitDescription PERMANENT 1BlockDiagram 2OperationalDescription 3Schematics 4BOM SHORT-TERM 5ExternalPhotos 6InternalPhotos 7Test-SetupPhotos 8UserManual TheApplicantunderstandsthatpursuanttoRule0.457,disclosureofthisapplicationandall accompanyingdocumentations,whereapplicable,willnotbemadepublicbeforethedateoftheGrant forthisapplication. Signatory： Contactname:LouisQi Tel:+86-755-86544807 Email:[email protected] Companyname:AnkerInnovationsLimited

2. 00 mm

NOTE: This document is issued byShenzhenMorlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 8 REPORT No.：SZ24060274S01 RF EXPOSURE EVALUATION REPORT APPLICANT : Anker Innovations Limited PRODUCT NAME : eufy Smart Lock E30 MODEL NAME : T85F1 BRAND NAME : eufy FCC ID :2AOKB-T85F1 STANDARD(S) : 47 CFR Part 2(2.1091) RECEIPT DATE : 2024-06-27 TEST DATE : 2024-07-04 to 2024-07-29 ISSUE DATE : 2024-08-01 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24060274S01 Page2of 8 DIRECTORY 1. Technical Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.1 Applicant and Manufacturer Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.2 Equipment under Test (EUT) Description ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 3 1.3 Applied Reference Documents ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 4 2. Device Category and RF Exposure Limit ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 5 3. Maximum Average Power Summary ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 6 4. RF Exposure Assessment ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 7 Annex A Testing Laboratory Information ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ 8 Change History Version Date Reason for change 1.0 2024-08-01 First edition MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24060274S01 Page3of 8 1. Technical Information Note: Provide by applicant. 1.1 Applicant and Manufacturer Information Applicant: Anker Innovations Limited Applicant Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Manufacturer: Anker Innovations Limited Manufacturer Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong 1.2 Equipment under Test (EUT) Description Product Name: eufy Smart Lock E30 Sample No.: 1# Hardware Version: V1 Software Version: V1.0.1.0 Frequency Bands: Bluetooth 2402MHz-2480MHz WLAN 2.4GHz 2412MHz-2462MHz Modulation Mode: Bluetooth GFSK(1Mbps, 2Mbps) WLAN 2.4GHz DSSS, OFDM Antenna Information: Bluetooth Antenna Type: PCB Antenna Antenna Gain: 3.7dBi WLAN 2.4GHz Antenna Type: PIFA Antenna Antenna Gain: 3.5dBi MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24060274S01 Page4of 8 1.3 Applied Reference Documents Leading reference documents for testing: Identity Document Title Method Determination /Remark 47 CFR Part 2(2.1091) Radio Frequency Radiation Exposure Assessment: mobile devices No deviation KDB 447498 D01v06 General RF Exposure Guidance No deviation Note 1: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 2: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. MORLAB ShenzhenMorlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] REPORT No.：SZ24060274S01 Page5of 8 2. Device Category and RF Exposure Limit Per user manual, based on 47 CFR 2.1091, this device belongs to mobile device category with General Population/Uncontrolled exposure. Mobile Devices: 47 CFR 2.1091(b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. General Population/Uncontrolled Exposure: The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully awa…

Text truncated - open the document above for the full version.

SHEET FOR APPROVAL （ Revision ： R ： A1 ） CUSTOMER(客户名称) Anker CS P/N(客户机种) T8 5F1 PART NAME(品名) BT/WIFI Antenna Antenna Type(天线类型) PCB/PIFA FREQUENCY(频率) 2.4-2.5GHz ANTENNA MANUFACTURER (天线制造商) Shenzhen ZTX Communication Technology Co., Ltd ZTX NO.(物料编号) 2.00006176 DATE(日期) 2023-06-16 Remark( 备注 ) ： Sign(客户确认签字盖章)： Address: No.34, Shilong Avenue, Shiyan Town, Baoan District, Shenzhen City (Tengda Industrial Park) Postcode: 518000Tel: 0755-27588320Fax: 0755-27588045http://www.chinaztx.com CUSTOMER QA CHECKED ME CHECKED RF CHECKED MANAGER CHECKED MANAGER CHECKED MANAGER CHECKED ME CHECKED RF CHECKED LISTER ANTENNA SPECIFICATION ApplicationDate:May,15,2023 Editor: Rev: R:A0 Page 1 of 8 CUS P/N :T8506 WIFI Antenna ZTX P/N : T8506 WIFI Antenna Revision history NODateThe first edition A12023-06-16 Alpha release ANTENNA SPECIFICATION ApplicationDate:May,15,2023 Editor: Rev: R:A0 Page 2 of 8 CUS P/N :T8506 WIFI Antenna ZTX P/N : T8506 WIFI Antenna Index Revision history 1 lndex 2 1Mechanical Specification 3 1-1 Mechanical Specification （T8506 WIFI Antenna ） 3 2 Test equipment 4 3Test Results Surmmary 5 3-1 Passive Test 5 3-2 Matching circuit 5 3-3 VSWR&Return loss plot&Smith Chart 5 3-4 2D/3D Radiation Pattern Results 6 4 Test Results Surmmary（BT） 4-1 Passive Test 7 4-2 Matching circuit 7 4-3 VSWR&Return loss plot&Smith Chart 7 4-4 2D/3D Radiation Pattern Results 8 ANTENNA SPECIFICATION ApplicationDate:May,15,2023 Editor: Rev: R:A0 Page 3 of 8 CUS P/N :T8506 WIFI Antenna ZTX P/N : T8506 WIFI Antenna DgndGnra TorancDCApprovaDaScaUnRvProduc NamProc NamT8506MaraProcThrd AngDrawng NumbrMara CodDmGrad 备注： 1〉图中所标注尺寸为必测尺寸,带*尺寸为重管控尺寸 2〉同轴线需焊接牢固 3> 端子与线材铆压后拉力25N98N 4〉产品加工及包装 5〉未经过ZTX材料不更,产满足1.13±0 1. Mechanical Specification 1.Mechanical Configuration（T8506 WIFIAntenna） ANTENNA SPECIFICATION ApplicationDate:May,15,2023 Editor: Rev: R:A0 Page 4 of 8 CUS P/N :T8506 WIFI Antenna ZTX P/N : T8506 WIFI Antenna D DCADU Nm NmM ADw NmM Dm 备注： 1〉图中所标注尺寸为*尺寸为重管控尺寸 2〉同轴线需焊接牢固 3> 端子与线材铆压25NN 4〉产品加工及包装 5〉未经过1.13±0 2.Test equipment ANTENNA SPECIFICATION ApplicationDate:May,15,2023 Editor: Rev: R:A0 Page 5 of 8 CUS P/N :T8506 WIFI Antenna ZTX P/N : T8506 WIFI Antenna D DCADU Nm NmM ADw NmM Dm 备注： 1〉图中所标注尺寸为*尺寸为重管控尺寸 2〉同轴线需焊接牢固 3> 端子与线材铆压25NN 4〉产品加工及包装 5〉未经过1.13±0 3.Test Results Surmmary 3-1 Passive Test 3-2 Matching circuit N/A 3-3 VSWR&Return loss plot&Smith Chart ANTENNA SPECIFICATION ApplicationDate:May,15,2023 Editor: Rev: R:A0 Page 6 of 8 CUS P/N :T8506 WIFI Antenna ZTX P/N : T8506 WIFI Antenna D DCADU Nm NmM ADw NmM Dm 备注： 1〉图中所标注尺寸为*尺寸为重管控尺寸 2〉同轴线需焊接牢固 3> 端子与线材铆压25NN 4〉产品加工及包装 5〉未经过1.13±0 3-4 2D/3D Radiation Pattern Results XOYXOZ YOZ ANTENNA SPECIFICATION ApplicationDate:May,15,2023 Editor: Rev: R:A0 Page 7 of 8 CUS P/N :T8506 WIFI Antenna ZTX P/N : T8506 WIFI Antenna D DCADU Nm NmM ADw NmM Dm 备注： 1〉图中所标注尺寸为*尺寸为重管控尺寸 2〉同轴线需焊接牢固 3> 端子与线材铆压25NN 4〉产品加工及包装 5〉未经过1.13±0 4.Test Results Surmmary（BT） 4-1 Passive Test 4-2 Matching circuit N/A 4-3 VSWR&Return loss plot&Smith Chart ANTENNA SPECIFICATION ApplicationDate:May,15,2023 Editor: Rev: R:A0 Page 8 of 8 CUS P/N :T8506 WIFI Antenna ZTX P/N : T8506 WIFI Antenna D DCADU Nm NmM ADw NmM Dm 备注： 1〉图中所标注尺寸为*尺寸为重管控尺寸 2〉同轴线需焊接牢固 3> 端子与线材铆压25NN 4〉产品加工及包装 5〉未经过1.13±0 4-4 2D/3D Radiation Pattern Results

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 78 REPORT No.：SZ24060274W01 TEST REPORT APPLICANT : Anker Innovations Limited PRODUCT NAME : eufy Smart Lock E30 MODEL NAME : T85F1 BRAND NAME : eufy FCC ID :2AOKB-T85F1 STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2024-06-27 TEST DATE : 2024-07-04 to 2024-07-29 ISSUE DATE : 2024-08-01 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 78 REPORT No.：SZ24060274W01 DIRECTORY 1. Summary of Test Result ·············································································· 4 1.1. Testing Applied Standards ········································································ 5 1.2. Test Equipment List ················································································· 6 1.3. Measurement Uncertainty ········································································· 8 1.4. Testing Laboratory ··················································································· 8 2. General Description ··················································································· 9 2.1. Information of Applicant and Manufacturer ················································· 9 2.2. Information of EUT ··················································································· 9 2.3. Channel List of EUT ··············································································· 10 2.4. Test Configuration of EUT ······································································· 11 2.5. Test Conditions ····················································································· 11 2.6. Test Setup Layout Diagram ····································································· 11 3. Test Results ···························································································· 14 3.1. Antenna Requirement ············································································ 14 3.2. Duty Cycle of Test Signal ········································································ 15 3.3. Maximum Peak Conducted Output Power ················································· 16 3.4. Maximum Average Conducted Output Power ············································ 17 3.5. 6 dB Bandwidth ····················································································· 18 3.6. Conducted Spurious Emissions and Band Edge ········································ 19 3.7. Power Spectral Density ·········································································· 20 3.8. Conducted Emission ·············································································· 21 3.9. Restricted Frequency Bands ··································································· 22 3.10. Radiated Emission ················································································· 23 Annex A Test Data and Result ······································································· 25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 78 REPORT No.：SZ24060274W01 Change History Version Date Reason for change 1.0 2024-08-01 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 78 REPORT No.：SZ24060274W01 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 N/A Duty Cycle of Test Signal Jul. 04, 2024 Su Xiaoxian PASS No deviation 3 15.247(b) Maximum Peak Conducted Output Power Jul. 04, 2024 Su Xiaoxian PASS No deviation 4 15.247(b) Maximum Average Conducted Output Power Jul. 04, 2024 Su Xiaoxian PASS No deviation 5 15.247(a) Bandwidth Jul. 04, 2024 Su Xiaoxian PASS No deviation 6 15.247(d) Conducted Spurious Emission and Band Edge Jul. 04, 2024 Su Xiaoxian PASS No deviation 7 15.247(e) Power Spectral Density Jul. 04, 2024 Su Xiaoxian PASS No deviation 8 15.207 Conducted Emission Jul. 11, 2024 Wang Deyong PASS No deviation 9 15.247(d) Restricted Frequency Bands Jul. 30, 2024 Yang Lian PASS No deviation 10 15.209, 15.247(d) Radiated Emission Jul. 30, 2024 Yang Lian PASS No deviation Note 1: The tests were performed according to the method of measurements prescribed in ANSI C63.10-2013 and KDB 558074 D01 v05r02. Note 2: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 3: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence interv…

Text truncated - open the document above for the full version.

NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 1 of 102 REPORT No.：SZ24060274W02 TEST REPORT APPLICANT : Anker Innovations Limited PRODUCT NAME : eufy Smart Lock E30 MODEL NAME : T85F1 BRAND NAME :eufy FCC ID :2AOKB-T85F1 STANDARD(S) :47 CFR Part 15 Subpart C RECEIPT DATE : 2024-06-27 TEST DATE :2024-07-04 to 2024-07-29 ISSUE DATE : 2024-08-01 Edited by: Peng Mi (Rapporteur) Approved by: Shen Junsheng (Supervisor) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 2 of 102 REPORT No.：SZ24060274W02 DIRECTORY 1. Summary of Test Result ·············································································· 4 1.1. Testing Applied Standards ········································································ 5 1.2. Test Equipment List ················································································· 6 1.3. Measurement Uncertainty ········································································· 8 1.4. Testing Laboratory ··················································································· 8 2. General Description ··················································································· 9 2.1. Information of Applicant and Manufacturer ················································· 9 2.2. Information of EUT ··················································································· 9 2.3. Channel List of EUT ··············································································· 10 2.4. Test Configuration of EUT ······································································· 11 2.5. Test Conditions ····················································································· 11 2.6. Test Setup Layout Diagram ····································································· 12 3. Test Results ···························································································· 15 3.1. Antenna Requirement ············································································ 15 3.2. Duty Cycle of Test Signal ········································································ 16 3.3. Maximum Peak and Average Conducted Output Power ······························· 17 3.4. 6 dB Bandwidth ····················································································· 18 3.5. Conducted Spurious Emissions and Band Edge ········································ 19 3.6. Power Spectral Density ·········································································· 20 3.7. Conducted Emission ·············································································· 21 3.8. Restricted Frequency Bands ··································································· 22 3.9. Radiated Emission ················································································· 23 Annex A Test Data and Result ······································································· 25 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 3 of 102 REPORT No.：SZ24060274W02 Change History Version Date Reason for change 1.0 2024-08-01 First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen, GuangDong Province, P. R. China Tel: 86-755-36698555 Fax: 86-755-36698525 Http://www.morlab.cn E-mail: [email protected] Page 4 of 102 REPORT No.：SZ24060274W02 1. Summary of Test Result No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.203 Antenna Requirement N/A N/A PASS No deviation 2 N/A Duty Cycle of Test Signal Jul. 04, 2024 Su Xiaoxian PASS No deviation 3 15.247(b) Maximum Peak Conducted Output Power Jul. 04, 2024 Su Xiaoxian PASS No deviation 4 15.247(b) Maximum Average Conducted Output Power Jul. 04, 2024 Su Xiaoxian PASS No deviation 5 15.247(a) Bandwidth Jul. 04, 2024 Su Xiaoxian PASS No deviation 6 15.247(d) Conducted Spurious Emission and Band Edge Jul. 04, 2024 Su Xiaoxian PASS No deviation 7 15.247(e) Power Spectral Density Jul. 04, 2024 Su Xiaoxian PASS No deviation 8 15.207 Conducted Emission Jul. 11, 2024 Wang Deyong PASS No deviation 9 15.247(d) Restricted Frequency Bands Jul. 30, 2024 Yang Lian PASS No deviation 10 15.209, 15.247(d) Radiated Emission Jul. 30, 2024 Yang Lian PASS No deviation Note 1: The tests were performed according to the method of measurements prescribed in ANSI C63.10-2013 and KDB 558074 D01 v05r02. Note 2: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 3: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL.1-3, Building A, FeiYang Science P…

Text truncated - open the document above for the full version.