2AOKB-T86P2C4G LTE Cam S330

Anker Innovations Limited ADD: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong TEL: +86-755-86544807 E-mail: [email protected] Attestation Letter Date:2026-03-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: Our product 4G LTE Cam S330, model: T86P2, FCC ID:2AOKB-T86P2C, for marketing purpose, this product only supports 2.4G Wi-Fi (2412-2462MHz, 802.11b/g/n20 modes), LTE B2/B4/B5/B12/B13/B14/B25/B26/B41/B66/B71. The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Printed Name: Justin Zhou Title: Testing and Compliance Director

CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Anker Innovations Limited ADD: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong TEL: +86-755-86544807 E-mail: [email protected] Attestation Letter Date: 2026-03-25 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2AOKB-T86P2C Anker Innovations Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Anker Innovations Limited (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Anker Innovations Limited certifies that the equipment does not use Kaspersky's software information. Sincerely, Signature Printed Name: Justin Zhou Title: Testing and Compliance Director

2.911(d)(7)USAAgentv1.2 Section2.911(d)(7)USAAgentforServiceofProcess Companyname:AnkerInnovationsLimited Address:Unit56,8thFloor,Tower2,AdmiraltyCentre,18HarcourtRoad,HongKong FRN:0027073105 2.911(d)(7)USADesignatedAgentforServiceofProcess We,[[AnkerInnovationsLimited](“theapplicant”)designate[[FantasiaTradingLLC] NOTE1 forthepurposeofacceptingserviceofprocessonbehalfoftheapplicant. Applicantconsent:WeAcknowledgeourconsenttoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipment,andatthephysicalU.S. addressandemailaddressofthedesignatedagentandacknowledgeour acceptanceofourobligationtomaintainanagentforserviceofprocessintheUnited Statesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminated allmarketingandimportationoftheapplicableequipmentwithintheU.S.,orthe conclusionofanyCommission-relatedadministrativeorjudicialproceedinginvolving theequipment,whicheverislater. Agentobligation:WeAcknowledgeourobligationtoacceptserviceofprocessinthe UnitedStatesformattersrelatedtotheapplicableequipmentatourphysicalU.S. addressandemailaddressfornolessthanoneyearaftereitherthegranteehas permanentlyterminatedallmarketingandimportationoftheapplicableequipment withintheU.S.,ortheconclusionofanyCommission-relatedadministrativeorjudicial proceedinginvolvingtheequipment,whicheverislater. USAAgent Companyname:FantasiaTradingLLC Address:5350OntarioMillsPkwy,STE100, Ontario,CA91764,UnitedStates FRN:0033423005 ContactName:ConnorZhai TelephoneNo:(800)988-7973 Email:[email protected] Applicant Companyname:AnkerInnovations Limited Address:Unit56,8thFloor,Tower2, AdmiraltyCentre,18HarcourtRoad, HongKong FRN:0027073105 ContactName:JustinZhou TelephoneNo:+86-755-86544807 Email:[email protected] Signature: Title:GeneralManager Signature: Title:ComplianceManager Date:2026/01/27Date:2026/01/27 2.911(d)(7)USAAgentv1.2 NOTE1:AnapplicantlocatedintheUnitedStatesmaydesignateitselfastheagentforservice ofprocess. Reference;FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Anker Innovations Limited ADD: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong TEL: +86-755-86544807 E-mail: [email protected] FCC Authorization Date: 2026-03-25 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Anker Innovations Limited, hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Justin Zhou Title: Testing and Compliance Director QA-FR-1 70-B

QA-FR-171-A Anker Innovations Limited ADD: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong TEL: +86-755-86544807 E-mail: [email protected] FCC Confidential Authorization Date: 2026-03-25 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AOKB-T86P2C In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Anker Innovations Limited) hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schemati cs Operation Description Parts List/Tune up procedure (for licensed devices) As well as short-term (secrecy cycle: 180 days) confidential treatment of information accompanying this application as outlined below: Internal Ph otos User’s Manual External Ph otos Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sin cerely, Signature: Prin ted Name: Justin Zhou Title: Testing and Compliance Director

RF EXPOSURE EVALUATION REPORT Applicant: Anker Innovations Limited Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong FCC ID: 2AOKB-T86P2C Product Name: 4G LTE Cam S330 Standard(s): 47 CFR §1.1307, 47 CFR §2.1091 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: 2603R33379E-RF-00D Date Of Issue: 2026/3/24 Reviewed By: Calvin Chen Title: RF Test Supervisor Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) Room 101 & 201, Building 2, 256 Pingdong Road, Dalang Town, Dongguan City, Guangdong, China. Tel: +86-769-83085888 www.ccttt.com.cn China Certification ICT Co., Ltd (Dongguan) Report No.: 2603R33379E-RF-00D Page 2 of 7 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the Room 101 & 201, Building 2, 256 Pingdong Road, Dalang Town, Dongguan City, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. Each test item follows the test standard(s) without deviation. China Certification ICT Co., Ltd (Dongguan) Report No.: 2603R33379E-RF-00D Page 3 of 7 CONTENTS DOCUMENT REVISION HISTORY........................................................................................... 4 1. GENERAL INFORMATION .................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 5 2. RF EXPOSURE EVALUATION .............................................................................................. 6 2.1 RF EXPOSURE EVALUATION ............................................................................................................... 6 2.1.1 Applicable Standard ....................................................................................................................................... 6 2.1.2 Calculation formula: ...................................................................................................................................... 6 2.1.3 Calculated Data: ............................................................................................................................................. 7 China Certification ICT Co., Ltd (Dongguan) Report No.: 2603R33379E-RF-00D Page 4 of 7 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 2603R33379E-RF-00D Original Report 2026/3/24 China Certification ICT Co., Ltd (Dongguan) Report No.: 2603R33379E-RF-00D Page 5 of 7 1. GENERAL INFORMATION 1.1 Product Description for Equipment under Test (EUT) EUT Name: 4G LTE Cam S330 EUT Model: T86P2 Rated Input Voltage: 3.69 Vdc from Battery or 5 Vdc from Adapter EUT Received Date: 2026/3/4 EUT Received Status: Good China Certification ICT Co., Ltd (Dongguan) Report No.: 2603R33379E-RF-00D Page 6 of 7 2. RF EXPOSURE EVALUATION 2.1 RF Exposure Evaluation 2.1.1 Applicable Standard According to subpart 15.247(i) and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. 2.1.2 Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: China Certification ICT Co., Ltd (Dongguan) Report No.: 2603R33379E-RF-00D Page 7 of 7 2.1.3 Calculated Data: Operation Modes Frequency (MHz) Antenna Gain Conducted output power including Tune-up Tolerance Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric) (dBm) (mW) 2.4G Wi-Fi 2412-2462 3.53 2.25 24.5 281.84 20 0.1262 1 LTE B2 1850-1910 2.59 1.82 23 199.53 20 0.0722 1 LTE B4 1710-1755 2.20 1.66 23 199.53 20 0.0659 1 LTE B5 824-849 2.22 1.67 25 316.23 20 0.1051 0.54…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Anker Innovations Limited Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong FCC ID: 2AOKB-T86P2C IC: 23451-T86P2C HVIN: T86P2C Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 4, July 24, 2025 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: 2603R33379E-RF-00A Date Of Issue: 2026/3/24 Reviewed By: Calvin Chen Title: RF Test Supervisor Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) Room 101 & 201, Building 2, 256 Pingdong Road, Dalang Town, Dongguan City, Guangdong, China. Tel: +86-769-83085888 www.ccttt.com.cn China Certification ICT Co., Ltd (Dongguan) Report No.: 2603R33379E-RF-00A Report Template: RF-FCC&RSS 247-A/0 Page 2 of 92 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the Room 101 & 201, Building 2, 256 Pingdong Road, Dalang Town, Dongguan City, Guangdong,China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol ―▲‖. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk ―★‖. Each test item follows the test standard(s) without deviation. China Certification ICT Co., Ltd (Dongguan) Report No.: 2603R33379E-RF-00A Report Template: RF-FCC&RSS 247-A/0 Page 3 of 92 CONTENTS DOCUMENT REVISION HISTORY........................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.1.1 General ........................................................................................................................................................... 6 1.1.2 Operation Frequency Detail ........................................................................................................................... 6 1.1.3 Antenna Information Detail▲ ....................................................................................................................... 6 1.1.4 Accessory Information ................................................................................................................................... 7 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.1 EUT Operation Condition: ............................................................................................................................. 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup .................................................................................................................................................... 12 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 13 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 13 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 14 3.2.1 Applicable Standard ..................................................................................................................................... 14 3.2.2 EUT Setup ..............................…

Text truncated - open the document above for the full version.

SPECIFICATION SPECIFICATION SHEETFORAPPROVAL （Revision：R：A0） CUSTOMER Anker CSP/NT86P2derivative PARTNAMEWIFIantennaassembly FREQUENCY2400~2500MHz CUSNO. ZTXNO.2.00002278 DATE 2026-03-02 CUSTOMER QA CHECKED ME CHECKED RF CHECKED MANAGER CHECKED ShenzhenZTXCommunicationTechnologyCo.,Ltd MANAGER CHECKED MANAGER CHECKED ME CHECKED RF CHECKED LISTER Wujun.LiYi.Zou Address:No.34,ShilongAvenue,ShiyanTown,BaoanDistrict,Shenzhen,(TengdaIndustrialPark)518000 Tel.:0755-27588320Fax:0755-27588045http://www.chinaztx.com Remark： Sign： ANTENNASPECIFICATION CUSP/N:T86P2derivative_WIFIantennaassemblyApplicationDate:Mar,02,2026Rev:R:A0 ZTXP/N: T86P2derivative_WIFIantennaassembly Editor:Page1of6 Revisionhistory EditionDatestate A02026-03-02Firstedition ANTENNASPECIFICATION CUSP/N:T86P2derivative_WIFIantennaassemblyApplicationDate:Mar,02,2026Rev:R:A0 ZTXP/N: T86P2derivative_WIFIantennaassembly Editor:Page2of6 Index Revisionhistory 1 Index 2 1MechanicalSpecification 3 1-1MechanicalSpecification( WIFIantennaassembly) 3 2Testequipment 4 3TestResultsSummary 5 3-1S11 5 3-2Passivetest 5 3-3Environmentaltreatment 5 3-42D/3DRadiationPatternResults 6 ANTENNASPECIFICATION CUSP/N:T86P2derivative_WIFIantennaassemblyApplicationDate:Mar,02,2026Rev:R:A0 ZTXP/N: T86P2derivative_WIFIantennaassembly Editor:Page3of6 1.MechanicalSpecification 1-1MechanicalConfiguration(WIFIantennaassembly) ANTENNASPECIFICATION CUSP/N:T86P2derivative_WIFIantennaassemblyApplicationDate:Mar,02,2026Rev:R:A0 ZTXP/N: T86P2derivative_WIFIantennaassembly Editor:Page4of6 2.Testequipment ANTENNASPECIFICATION CUSP/N:T86P2derivative_WIFIantennaassemblyApplicationDate:Mar,02,2026Rev:R:A0 ZTXP/N: T86P2derivative_WIFIantennaassembly Editor:Page5of6 3.TestResultsSummary 3-1S11 3-2Passivetest 3-3Environmenttreatment ANTENNASPECIFICATION CUSP/N:T86P2derivative_WIFIantennaassemblyApplicationDate:Mar,02,2026Rev:R:A0 ZTXP/N: T86P2derivative_WIFIantennaassembly Editor:Page6of6 3-42D/3DRadiationPatternResults 2400 2450 2500