2AOKB-T8709Wi-Fi Module

Anker Innovations Limited Add:Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Tel: +86-755-86544807 Email: [email protected] Attestation Letter Date: 2025-09-11 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: Our product Wi-Fi Module, Model: T8709, FCC ID:2AOKB-T8709, for marketing purpose, this product only supports SRD(920-920.8MHz),2.4G WiFi(2412-2462MHz, 802.11b/g/n ht20/ax he20 modes), 5.2G WiFi(5150-5250MHz,802.11a/n ht20/ac vht20/ax he20 modes), 5.8G WiFi(5725-5850MHz,802.11a/n ht20/ac vht20/ax he20 modes),802.11ax mode only supports full RU and doesn't support partial RU. The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Printed Name: Louis Qi Title:Testing and Compliance Director

CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Anker Innovations Limited Add:Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Tel: +86-755-86544807 Email: [email protected] Attestation Letter Date: 2025-09-11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2AOKB-T8709 Anker Innovations Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Anker Innovations Limited (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Anker Innovations Limited certifies that the equipment does not use Kaspersky's software information. Sincerely, Signature Printed Name: Louis Qi Title: Testing and Compliance Director

CFR 47 §2.911(d)(7) U.S Agent U.S. AGENT LETTER OF ATTESTATION Date: 2025-09-11 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2AOKB-T8709 Anker Innovations Limited (“the Applicant”) certifies that, as of the date of the filing of the application, Fantasia Trading LLC (U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Anker Innovations Limited (“the Applicant”)accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Fantasia Trading LLC (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 FRN: 0033423005 Tel.: +1 (800)988 7973 Email: [email protected] Signed by (printed name): Louis Qi Signature: Applicant: Anker Innovations Limited Add: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong FRN: 0027073105 Tel: +86-755-86544807 Email: [email protected] Signed by (printed name): Louis Qi Signature:

QA-FR-170-B Anker Innovations Limited Add: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Tel: +86-755-86544807 Email: [email protected] FCC Authorization Date: 2025-09-11 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Anker Innovations Limited, Hereby authorizes Bay Area Compliance Laboratories Corp. (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Louis Qi Title: Testing and Compliance Director

QA-FR-172-A Anker Innovations Limited Add: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Tel: +86-755-86544807 Email: [email protected] FCC Confidential Authorization Date: 2025-06-06 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AOKB-T8709 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Anker Innovations Limited hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description  Device Security Declaration As well as short-term (secrecy cycle: 180days) confidential treatment of information accompanying this application as outlined below:  Internal Photos  User’s Manual  External Photos  Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Printed Name: Louis Qi Title: Testing and Compliance Director

10mm 2mm 57.5mm 5mm 36.5mm

MAXIMUM PERMISSIBLE EXPOSURE EVALUATION REPORT Applicant: Anker Innovations Limited Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Product Name: Wi-Fi Module F C C I D : 2AOKB-T8709 Standard(s): 47 CFR §1.1310, 47 CFR §2.1091, 47 CFR §15.247(i), 47 CFR §15.407(f) Report Number: 2502T57876E-RF-00E Report Date: 2025/9/11 The above device has been tested and found compliant with the requirement of the relative standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Pedro Yun Approved By: Gavin Xu Title: Project Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T57876E-RF-00E Report Template Version: FCC §2.1091-V1.0 Page 2 of 7 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 3 1. GENERAL INFORMATION .................................................................................................... 4 1.1 GENERAL DESCRIPTION OF EQUIPMENT UNDER TEST ..................................................................... 4 2.RF EXPOSURE EVALUATION (MPE) ................................................................................... 5 2.1. RF EXPOSURE EVALUATION .............................................................................................................. 5 2.1.1 Applicable Standard ....................................................................................................................................... 5 2.1.2 Calculation formula ....................................................................................................................................... 5 2.1.3 Calculated Data: ............................................................................................................................................. 5 EXHIBIT A - EUT PHOTOGRAPHS .......................................................................................... 7 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T57876E-RF-00E Report Template Version: FCC §2.1091-V1.0 Page 3 of 7 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 2502T57876E-RF-00E Original Report 2025/9/11 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T57876E-RF-00E Report Template Version: FCC §2.1091-V1.0 Page 4 of 7 1. GENERAL INFORMATION 1.1 General Description Of Equipment under Test EUT Name: Wi-Fi Module EUT Model: T8709 Rated Input Voltage: DC 5V from USB EUT Received Date: 2025/5/9 EUT Received Status: Good Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T57876E-RF-00E Report Template Version: FCC §2.1091-V1.0 Page 5 of 7 2.RF EXPOSURE EVALUATION (MPE) 2.1. RF Exposure Evaluation 2.1.1 Applicable Standard According to subpart 15.247(i), 15.407(f)and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. 2.1.2 Calculation formula Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: 2.1.3 Calculated Data: Operation Modes Frequency (MHz) Antenna Gain ▲ Conducted output power including Tune-up Tolerance ▲ Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) 900M SRD 920.0-920.82.97 1.98-5.780.2620.00 0.0001 0.6 2.4G Wifi 2412-24626.26 4.23 27.0501.1920.00 0.4216 1.0 5G Wifi 5150-52507.76 5.97 14.025.1220.00 0.0299 1.0 5725-58508.17 6.56 20.5112.2020.00 0.1465 1.0 Note: For SRD, field stren gth is 92.39dBμV/m @ 3m = -2.81 dBm EIRP. Conducted power is -5.78dBm. Note: The Antenna Gain and Conducted output power including Tune-up Tolerance provided by manufacturer. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T57876E-RF-00E Report Template Version: FCC §2.1091-V1.0 Page 6 of 7 For Simultaneous transmission: 2.4G Wifi/ 5G Wifi ca…

Text truncated - open the document above for the full version.

SPECIFICATION SPECIFICATION SHEETFORAPPROVAL （Revision：R：A0） CUSTOMER Anker CSP/NT8707 PARTNAMEWIFIantennaassembly FREQUENCY2400~2500/5150~5850MHz CUSNO. ZTXNO.2.00001717 DATE 2025-05-07 CUSTOMER QA CHECKED ME CHECKED RF CHECKED MANAGER CHECKED ShenzhenZTXCommunicationTechnologyCo.,Ltd MANAGER CHECKED MANAGER CHECKED ME CHECKED RF CHECKED LISTER Le.QinYiqing.Lin Address:No.34,ShilongAvenue,ShiyanTown,BaoanDistrict,Shenzhen,(TengdaIndustrialPark)518000 Tel.:0755-27588320Fax:0755-27588045http://www.chinaztx.com Remark： Sign： ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 1 of10 Revisionhistory EditionDatestate A02025-05-07Firstedition ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 2 of10 Index Revisionhistory 1 lndex 2 1MechanicalSpecification 3 1-1 MechanicalSpecification（ WIFIantennaassembly ） 3 2Testequipment 4 3TestResultsSurmmary 5 3-1S11 5 3-2No-sourcetestdata 6 3-32D/3DRadiationPatternResults 7~10 ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 3 of10 1.MechanicalSpecification 1-1MechanicalConfiguration（WIFIantennaassembly） ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 4 of10 2.Testequipment ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 5 of10 3.TestResultsSurmmary 3-1S11 WIFI1 WIFI2 ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 6 of10 3-2No-sourcetestdata WIFI1 WIFI2 ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 7 of10 3-32D/3DRadiationPatternResults WIFI1:2.4Gdirectiondiagram ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 8 of10 WIFI1:5Gdirectiondiagram ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 9 of10 WIFI2:2.4Gdirectiondiagram ANTENNASPECIFICATION CUSP/N: T8707_WIFIantennaassembly ApplicationDate:May,07,2025Rev:R:A0 ZTXP/N: T8707_WIFIantennaassembly Editor:Page 10 of10 WIFI2:5Gdirectiondiagram

TEST REPORT Applicant: Anker Innovations Limited Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Product Name: Wi-Fi Module F C C I D : 2AOKB-T8709 Standard(s): 47 CFR Part 15, Subpart E(15.407) ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024 ★ KDB 789033 D02 General U-NII Test Procedures New Rules v02r01 Report Number: 2502T57876E-RF-00B Report Date: 2025/8/28 The above device has been tested and found compliant with the requirement of the relative standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Pedro Yun Approved By: Gavin Xu Title: Project Engineer Title: RF Supervisor Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Each test item follows the test standard(s) without deviation. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: 2502T57876E-RF-00B Report Template Version: FCC-WiFi5-Indoor AP-V2.0 Page 2 of 107 CONTENTS DOCUMENT REVISION HISTORY ................................................................................................. 4 1. GENERAL INFORMATION ........................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ............................................................... 5 1.2 ACCESSORY INFORMATION ........................................................................................................................ 5 1.3 ANTENNA INFORMATION DETAIL▲ .......................................................................................................... 5 1.4 EQUIPMENT MODIFICATIONS ..................................................................................................................... 6 2. SUMMARY OF TEST RESULTS ................................................................................................... 7 3. DESCRIPTION OF TEST CONFIGURATION ............................................................................ 8 3.1 OPERATION FREQUENCY DETAIL .............................................................................................................. 8 3.2 EUT OPERATION CONDITION .................................................................................................................... 8 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ................................................................................................. 9 3.4 SUPPORT CABLE LIST AND DETAILS .......................................................................................................... 9 3.5 BLOCK DIAGRAM OF TEST SETUP ............................................................................................................ 10 3.6 TEST FACILITY .......................................................................................................................................... 12 3.7 MEASUREMENT UNCERTAINTY ................................................................................................................ 12 4. REQUIREMENTS AND TEST PROCEDURES ......................................................................... 13 4.1 AC LINE CONDUCTED EMISSIONS ........................................................................................................... 13 4.1.1 Applicable Standard ............................................................................................................................................ 13 4.1.2 EUT Setup ........................................................................................................................................................... 14 4.1.3 EMI Test Receiver Setup .................................................................................................................................... 14 4.1.4 Test Procedure ..................................................................................................................................................... 15 4.1.5 Corrected Amplitude & Margin Calculation ....................................................................................................... 15 4.1.6 Test Result ........................................................................................................................................................... 15 4.2 RADIATION SPURIOUS EMISSIONS ............................................................................................................ 16 4.2.1 Applicable Standard ............................................................................................................................................ 16 4.2.2 EUT Setup ........................................................................................................................................................... 17 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ................................................................................................. 19 4.2.4 Test Procedure ...........................................................................................................................…

Text truncated - open the document above for the full version.