2AOKB-T8L40Indoor Floor Lamp E10

Anker Innovations Limited Add:Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Tel: +86-755-86544807 Email: [email protected] Attestation Letter Date: 2024-08-30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir or Madam: Our product Indoor Floor Lamp E10, Model: T8L40,FCC ID:2AOKB-T8L40,for marketing purpose, this product only supports BLE 1M& 2M,2.4G WiFi(2412-2462MHz, 802.11b/g/n ht20 modes),The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Printed Name: Louis Qi Title: Manager

CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Anker Innovations Limited Add:Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Tel: +86-755-86544807 Email: [email protected] Attestation Letter Date: 2024-08-30 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID:2AOKB-T8L40 Anker Innovations Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Anker Innovations Limited (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Printed Name: Louis Qi Title:Manager

CFR 47 §2.911(d)(7) U.S Agent U.S. AGENT LETTER OF ATTESTATION Date: 2024-08-30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID:2AOKB-T8L40 Anker Innovations Limited (“the Applicant”) certifies that, as of the date of the filing of the application, Fantasia Trading LLC (U.S. agent). is our designated U.S. agent for service of process for the above referenced FCC ID. Anker Innovations Limited (“the Applicant”)accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Fantasia Trading LLC (U.S. agent) accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Fantasia Trading LLC Address: 5350 Ontario Mills Pkwy, STE 100, Ontario, CA 91764 FRN: 0033423005 Tel.: +1 (800)988 7973 Email: [email protected] Signed by (printed name): Louis Qi Signature: Applicant: Anker Innovations Limited Add: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong FRN: 0027073105 Tel: +86-755-86544807 Email: [email protected] Signed by (printed name): Louis Qi Signature:

QA-FR-170-B Anker Innovations Limited Add: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Tel: +86-755-86544807 Email: [email protected] FCC Authorization Date: 2024-08-30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Anker Innovations Limited, Hereby authorizes Bay Area Compliance Laboratories Corp. (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Louis Qi Title:Manager

QA-FR-172-A Anker Innovations Limited Add: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong Tel: +86-755-86544807 Email: [email protected] FCC Confidential Authorization Date: 2024-08-30 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2AOKB-T8L40 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Anker Innovations Limited hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description As well as short-term (secrecy cycle: 180days) confidential treatment of information accompanying this application as outlined below:  Internal Photos  User’s Manual  External Photos  Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature Printed Name: Louis Qi Title:Manager

Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:2402W90409E-RF-00A Report Template Version: FCC+IC-BLE-V1.2 Page 50 of 52 EXHIBIT C - RF EXPOSURE EVALUATION Maximum Permissible Exposure (MPE) Applicable Standard According to subpart §1.1310,15.247(i) systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; * = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Calculation formula: Prediction of power density at the distance of the applicable MPE limit S = PG/4R² = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:2402W90409E-RF-00A Report Template Version: FCC+IC-BLE-V1.2 Page 51 of 52 Calculated Data: Mode Frequency (MHz) Antenna Gain Conducted output power including Tune-up Tolerance Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) (dBi) (numeric)(dBm)(mW) BLE 2402-24803.94 2.48 6.54.47 20.00 0.002 1.0 WiFi 2412-24622.93 1.96 23.5223.87 20.00 0.087 1.0 Note: The Conducted output power including Tune-up Tolerance provided by manufacturer WiFi and BLE module can transmit simultaneously: =S WiFi /S limit-WiFi + S BLE /S limit- BLE =0.087/1+0.002/1 =0.089 < 1.0 Result: The device meet FCC MPE at 20 cm distance

爱特恩科技（深圳）有限公司 0 APPROVAL No.ATCSZ-5-170807-001ISSUE1 规 格 书 SPECIFICATION FOR APPROVAL 物料描述 DESCRIBE: 客户料号 Customer NO: 物料编码 PART NO: ATC0821 HY011B05RA 天线类型 Antenna type: WIFI/ BT Antenna 日期 DATE: 2024.05.25 ADD: 201, Building C, Building 5, Skyworth Innovation Valley, Tangtou 1 Road, Tangtou Community, Shiyan Street, Bao'an District, Shenzhen 爱特恩科技（深圳）有限公司 供应商 PROVIDER: Aiten Technology (Shenzhen) Co., LTD Antenna For Anker 1 Test equipment BT-ANT WIFI-ANT 2 CustomerAnkerWritten ByLong ningfangOrig.Date 2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date 2024.05.25 DescriptionWIFIApproved ByShinApproved Date2024.05.25 WIFI Matching circuit 3 CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionWIFIApproved ByShinApproved Date2024.05.25 WIFI Antenna S11 4 Customer 客户 Written By 制作 Orig. Date 制作日期 Part Number 料 号 Revised By 校 订 Revised Date 校 订 日期 Description 零件名 称 Approved By 确 认 Approved Date 确 认 日期 WIFI Antenna Efficiency&Peak Gain CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionWIFIApproved ByShinApproved Date2024.05.25 Passive test data 5 CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionWIFIApproved ByShinApproved Date2024.05.25 WIFI Directional pattern TEST 6 CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionWIFIApproved ByShinApproved Date2024.05.25 7 WIFI Antenna Draw CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionWIFIApproved ByShinApproved Date2024.05.25 8 CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionBTApproved ByShinApproved Date2024.05.25 BT ANT Matching circuit 9 CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionBTApproved ByShinApproved Date2024.05.25 BT Antenna S11 10 BT Antenna Efficiency&Peak Gain CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionBTApproved ByShinApproved Date2024.05.25 Passive test data 11 CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionBTApproved ByShinApproved Date2024.05.25 BT Directional pattern TEST 12 CustomerAnkerWritten ByLong ningfangOrig.Date2024.05.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionBTApproved ByShinApproved Date2024.05.25 13 Customer 客户 Written By 制作 Orig. Date 制作日期 Part Number 料 号 Revised By 校 订 Revised Date 校 订 日期 Description 零件名 称 Approved By 确 认 Approved Date 确 认 日期 BT Antenna Draw CustomerAnkerWritten ByLong ningfangOrig.Date2024.5.25 Part NumberATC821 HY010B05RA Revised BYZhang wanzheRevised Date2024.05.25 DescriptionBTApproved ByShinApproved Date2024.05.25

TEST REPORT Applicant: Anker Innovations Limited Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong P r o d u c t N a m e : Indoor Floor Lamp E10 F C C I D : 2AOKB-T8L40 I C : 23451-T8L40 H V I N : T8L40 Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 3, August 2023 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2402W90409E-RF-00B Report Date: 2024/9/10 The above device has been tested and found compliant with the requirement of the relative standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Gavin Xu Approved By: Ivan Cao Title: RF Engineer Title: Manager Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:2402W90409E-RF-00B Report Template Version: FCC+IC-Wi-Fi2.4-V1.0 Page 2 of 58 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 4 1. GENERAL INFORMATION .................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 5 1.2 ACCESSORY INFORMATION ................................................................................................................. 5 1.3 ANTENNA INFORMATION DETAIL▲ ................................................................................................... 5 1.4 EQUIPMENT MODIFICATIONS ............................................................................................................. 5 2. SUMMARY OF TEST RESULTS ............................................................................................ 6 3. DESCRIPTION OF TEST CONFIGURATION ..................................................................... 7 3.1 OPERATION FREQUENCY DETAIL ....................................................................................................... 7 3.2 EUT OPERATION CONDITION ............................................................................................................. 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ......................................................................................... 7 3.4 SUPPORT CABLE LIST AND DETAILS .................................................................................................. 7 3.5 BLOCK DIAGRAM OF TEST SETUP ...................................................................................................... 8 3.6 TEST FACILITY ................................................................................................................................... 10 3.7 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 4. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 4.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 4.1.1 Applicable Standard ..................................................................................................................................... 11 4.1.2 EUT Setup.................................................................................................................................................... 13 4.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 4.1.4 Test Procedure ............................................................................................................................................. 14 4.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 4.1.6 Test Result ................................................................................................................................................... 14 4.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 15 4.2.1 Applicable Standard ..................................................................................................................................... 15 4.2.2 EUT Setup.................................................................................................................................................... 15 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 17 4.2.4 Test Procedure ............................................................................................................................................. 17 4.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 17 4.2.6 Test Result .......................................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Anker Innovations Limited Address: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong P r o d u c t N a m e : Indoor Floor Lamp E10 F C C I D : 2AOKB-T8L40 I C : 23451-T8L40 H V I N : T8L40 Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 3, August 2023 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Report Number: 2402W90409E-RF-00A Report Date: 2024/9/10 The above device has been tested and found compliant with the requirement of the relative standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Gavin Xu Approved By: Ivan Cao Title: RF Engineer Title: Manager Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.:2402W90409E-RF-00A Report Template Version: FCC+IC-BLE-V1.2 Page 2 of 52 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 4 1. GENERAL INFORMATION .................................................................................................... 5 1.1 GENERAL DESCRIPTION OF EQUIPMENT UNDER TEST ..................................................................... 5 1.2 ACCESSORY INFORMATION ................................................................................................................. 5 1.3 ANTENNA INFORMATION DETAIL▲ ................................................................................................... 5 1.4 EQUIPMENT MODIFICATIONS ............................................................................................................. 5 2. SUMMARY OF TEST RESULTS ............................................................................................ 6 3. DESCRIPTION OF TEST CONFIGURATION ..................................................................... 7 3.1 OPERATION FREQUENCY DETAIL ....................................................................................................... 7 3.2 EUT OPERATION CONDITION ............................................................................................................. 7 3.3 SUPPORT EQUIPMENT LIST AND DETAILS ......................................................................................... 7 3.4 SUPPORT CABLE LIST AND DETAILS .................................................................................................. 7 3.5 BLOCK DIAGRAM OF TEST SETUP ...................................................................................................... 8 3.6 TEST FACILITY ................................................................................................................................... 10 3.7 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 4. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 4.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 4.1.1 Applicable Standard ..................................................................................................................................... 11 4.1.2 EUT Setup.................................................................................................................................................... 13 4.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 4.1.4 Test Procedure ............................................................................................................................................. 14 4.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 4.1.6 Test Result ................................................................................................................................................... 14 4.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 15 4.2.1 Applicable Standard ..................................................................................................................................... 15 4.2.2 EUT Setup.................................................................................................................................................... 15 4.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 17 4.2.4 Test Procedure ............................................................................................................................................. 17 4.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 17 4.2.6 Test Result .....................................…

Text truncated - open the document above for the full version.