2AOKB-T9150Smart Scale

Owner's Manual T9150 51005003825 V01 Smart Scale P3 kg BMI % English 01 Deutsch 12 Español 25 Français 38 Polska 51 Türkçe 64 Thank you for purchasing Smart Scale P3. Carefully read all the instructions below before using this device, and keep this manual for future reference. Table of Contents 01 Important Safety Instructions 05 What's in the Box 06 Inserting the Batteries 06 Selecting the Measuring Unit 07 Installing the EufyLife App and Pairing 08 Starting a Measurement 08 Weight-Only Measurement 08 Data Service Third Party Services Data Export 09 Maintenance 09 Troubleshooting When Measuring 10 Specifications 11 Customer Service 01 ENEN 02 Important Safety Instructions • This device is powered by 4 AAA batteries. Do not attempt to recharge non-rechargeable batteries as this can cause the batteries to leak or explode. • Do not mix and use different types of batteries together, e.g. lithium-ion (Li-ion) and nickel- metal hydride (NiMH) batteries. • Do not mix new and used batteries. • If the device is not used for an extended period of time, remove the batteries before storing the device in a cool and dry place. • This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of this appliance in a safe way and understand the hazards involved. Children should not play with this appliance. Cleaning and user maintenance should not be carried out by children without supervision. • Used batteries should be placed in a sealed plastic bag and disposed of safely according to local environmental regulations. • Read all instructions before using the device. Keep the manual for future reference. • Only use the device as described in this user manual. Any misuse may result in electric shocks, burns, fires, or cause other unexpected hazards. • Be aware that this device is designed for individuals to measure their weight and to monitor their body composition. Any information provided by this device is in no way meant to treat, cure, or prevent diseases or illnesses from happening. • DO NOT use this device if you are pregnant or if you suspect you may be pregnant. The effects of this device on a fetus are unknown and untested. • DO NOT use this device if you use a wearable or implanted electronic device such as a defibrillator or pacemaker. • This device should not be used by individuals who are acutely or chronically ill, suffering from diseases or taking medications that can affect water levels. The accuracy of the readings for these individuals has not been verified. Specific medical advice should be obtained from a physician. • The device is equipped with a data transmission function that emits electromagnetic energy. Portable Radio Frequency (RF) communications equipment (including peripherals such as antenna cables and external antennas) should not be used within 30 cm (12 inches) of the device, otherwise, performance may be affected. • Do not modify this device. • Do not expose this device to extreme temperatures, direct sunlight, moisture, or corrosive environments. • To prevent slipping, do not step on the device after bathing or showering. • This device should not be used when it is adjacent to or stacked on top of another device because it could cause the device to operate improperly. If such use is necessary, this device and the other device should be observed to verify that they are operating normally. • If the batteries start to leak, put on your gloves and remove the leaking batteries from the battery compartment immediately. Place them in a clear plastic bag and recycle. If you don't wear gloves, you should wash your hands thoroughly with soap afterwards. In case of accidental contact with eyes, seek medical attention immediately. Usage Tips: • To ensure user profile accuracy, follow the instructions below when you start measurements: • Place the scale on a flat, hard surface. Soft surfaces such as carpeting will affect the performance of the scale. • Step on the platform with bare feet. Stand still until the measurement is complete. • For the most consistent measurements, weigh yourself at the same time of day and location. • Make sure your user profile (including birth date, gender, height, etc.) is accurate. Entering inaccurate information will affect the accuracy of the scale's measurements. • Avoid weighing yourself immediately after 03 ENEN 04 strenuous exercise, sitting in the sauna, taking a bath, or drinking and eating. • The condition of the skin on the bottom of your feet can affect the measurement. The natural effects of aging or activity can harden the skin. Take your reading with clean, slightly damp feet for optimal accuracy. • Body fat percentage estimates will vary with the amount of water in the body, and can be affected by dehydration or overhydration due to factors such as alcohol consumption, menstruation, illness, intense exercise, etc. • Considering the vast individual differences among children under the age of 16, the measurement of body fat or other body composition measurements may be less accurate. Their weight-only measurements will remain accurate. • This scale is not intended for use by professional athletes. Trademark Notice • Apple, App Store and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. • Google Play, Google Home, Google Fit and the Google Play logo are trademarks of Google Inc. • Fitbit is a registered trademark of Fitbit, Inc. in the U.S. and other countries. Notice This symbol on the device or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into …

Text truncated - open the document above for the full version.

AnkerInnovationsLimited 2.911(d)(7)USAAgentv1.2 Section2.911(d)(7)USA Agentfor Serviceof Process Companyname:AnkerInnovationsLimited Address:Room1318-19,HollywoodPlaza,610 NathanRoad,Mongkok,Kowloon,Hongkong 2.911(d)(7)USADesignatedAgentforServiceof Process We, [Anker Innovations Limited] (“the applicant”) designate [Fantasia Trading LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicantconsent:We Acknowledgeour consentto acceptserviceof processin the UnitedStatesfor mattersrelatedto the applicableequipment,and at the physicalU.S. addressand email addressof the designatedagent and acknowledgeour acceptanceof our obligationto maintainan agent for serviceof processin the UnitedStatesfor no less than one year after eitherthe granteehas permanently terminatedall marketingand importationof the applicableequipmentwithin the U.S., or the conclusionof any Commission-relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. Agentobligation:We Acknowledgeour obligationto acceptserviceof processin the UnitedStatesfor mattersrelatedto the applicableequipmentat our physicalU.S. addressand email addressfor no less than one year after either the granteehas permanentlyterminatedall marketingand importationof the applicableequipmentwithinthe U.S., or the conclusionof any Commission-relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. USA Agent Companyname:FantasiaTradingLLC Address:5350 OntarioMills Pkwy,STE 100, Ontario, CA 91764 , UnitedStates FRN: 0033423005 ContactName:Louis Qi TelephoneNo: +1 (800)9887973 Ema il: [email protected] Applicant Companyname:Anker InnovationsLimited Address:Room1318-19,HollywoodPlaza,610 NathanRoad,Mongkok,Kowloon,Hongkong ContactName:Louis.qi TelephoneNo: +86-755-86544807 Email: [email protected] Signature: Signature: Title: ComplianceManagerTitle: ComplianceManager Date: 21/2/2023Date: 21/2/2023 NOTE1: An applicantlocatedin the UnitedStatesmay designateitself as the agent for serviceof process. Reference;FederalRegisterdocument2022-28263publishedon 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-th e-communications-supply-chain-through-the

AnkerInnovationsLimited Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon,Hongkong FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Feb.28,2023 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2AOKB-T9150 [AnkerInnovationsLimited](“theapplicant”)certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. Sincerely, (Applicantsignature) (LouisQi)

AnkerInnovationsLimited Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon,Hongkong FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:Feb.28,2023 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2AOKB-T9150 [AnkerInnovationsLimited](“theapplicant”)certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredListasanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (LouisQi)

Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Agent Authorization Company: Anker Innovations Limited Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong Product Name: Smart Scale Model Number(s): T9150 Product Description: Smart Scale We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Feb. 28, 2023 Name: Louis Qi Title: General Manager Company: Anker Innovations Limited

AnkerInnovationsLimited Room1318-19,HollywoodPlaza,610NathanRoad,Mongkok,Kowloon,Hongkong Long/Short-termConfidentialityRequest FederalCommunicationsCommissionDate:Feb.28,2023 44512 th StreetSW Washington,DC20554 FCCID:2AOKB-T9150 ToWhomitmayconcerns, Pursuanttosections0.457(d)and0.459ofCFR47andtoavoidprematurereleaseof sensitiveinformationpriortomarketingorreleaseoftheproducttothepublic,wehereby requestslong-termconfidentialtreatmentofinformationaccompanyingthisapplicationas outlinedbelow: SchematicsPartsList BlockDiagramTune-UpInfo OperationalDescriptionAntennaSpecificationFCC_Confidential Inadditionweherebyrequestthefollowingexhibitscontainedinthisapplicationtobe temporarily(short-termconfidentilality)withheldfromthepublicdisclosure foraninitialperiodof180daysuntil:notapplicable ExternalPhotosTestSetupPhotos InternalPhotosUsersManual Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesemattersmightbeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. Theapplicantunderstandsthatpursuanttorule0.457(d),disclosureofthisapplicationand allaccompanyingdocumentationwillnotbemadebeforethedateoftheGRANTforthis application. Ifyouhaveanyquestions,pleasefeelfreetocontactme. Yourssincerely, Signatory Contactperson:LouisQi Title:GeneralManager

Report No.: AGC01110230210AP03 Page 1 of 3 EXTERNAL PHOTOS TOP VIEW OF EUT BOTTOM VIEW OF EUT Report No.: AGC01110230210AP03 Page 2 of 3 FRONT VIEW OF EUT BACK VIEW OF EUT Report No.: AGC01110230210AP03 Page 3 of 3 LEFT VIEW OF EUT RIGHT VIEW OF EUT ****************************************End of Report*************************************

SIZE：80*44mm

Report No.: AGC01110230210AP03 Page 1 of 5 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC01110230210AP03 Page 2 of 5 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC01110230210AP03 Page 3 of 5 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) WIFI Antenna Report No.: AGC01110230210AP03 Page 4 of 5 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) BT Antenna Report No.: AGC01110230210AP03 Page 5 of 5 INTERNAL VIEW OF EUT (FIGURE 6) ****************************************End of Report*************************************

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description Smart Scale Model Name T9150 FCC ID 2AOKB-T9150 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BLE: 1Mbps Pt=-0.674dBm=0.86mW The value of the Maximum output power Pt is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(0.86mW /5mm) .[√2.402(GHz)]= 0.27<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. BLE: 2Mbps Pt=-0.704dBm=0.85mW The value of the Maximum output power Pt is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(0.85mW /5mm) .[√2.402(GHz)]= 0.26<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 2.4G WIFI Pt=8.61dBm=7.26mW The value of the Maximum output power Pt is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(7.26mW /5mm) .[√2.48(GHz)]= 2.25<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

ProductSpecification P/N: WIFIandBTAntenna Rev.: A Page: 7 / 15 7 3.4WiFi3VSWR/ReturnLoss/Smith: 3.5WiFiEfficiencyAndGain: ProductSpecification P/N: WIFIandBTAntenna Rev.: A Page: 8 / 15 8 3.6.WiFi3DPattern（2450MHz） ProductSpecification P/N: WIFIandBTAntenna Rev.: A Page: 9 / 15 9 3.7WiFiEngineeringdrawings： NOTE: 1.Thematerialiselectrolyticcopper+PI(onepairandhalf),andtheoverallthicknessislessthan0.07mm. 2.Thesurfaceisblack,andthebackisawholepieceof3M300LESadhesive. 3.Thecrosssectionismadeofcopperwire,andthegreendiagonalsectionisnotmadeofcopper,leaving thebasematerialforconnection.Theoverallprofilefollowstheprofileprofile. 4.ComplywiththelatesttermsofROHS2.0,manageinaccordancewiththeenvironmentalprotection requirementsoflocalregulations ProductSpecification P/N: WIFIandBTAntenna Rev.: A Page: 11 / 15 11 4.4BTVSWR/ReturnLoss/Smith: 4.5BTEfficiencyAndGain: ProductSpecification P/N: WIFIandBTAntenna Rev.: A Page: 12 / 15 12 4.6.BT3DPattern（2450MHz） ProductSpecification P/N: WIFIandBTAntenna Rev.: A Page: 13 / 15 13 4.7BTEngineeringdrawings： PCBon-boardantenna ProductSpecification P/N: WIFI and BT Antenna Rev.: A Page: 14 / 15 14 5. WiFi and BT antennaisolation WiFi and BT antennaisolationdata (about- 24~- 28dB)

Page 1 of 68 Report No.: AGC01110230210FE05 FCC ID : 2AOKB-T9150 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Scale BRAND NAME : eufy MODEL NAME : T9150 APPLICANT : Anker Innovations Limited DATE OF ISSUE : Feb. 27, 2023 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd FCC Test Report Report No.: AGC01110230210FE05 Page 2 of 68 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Feb. 27, 2023 Valid Initial Release Report No.: AGC01110230210FE05 Page 3 of 68 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 7 2.3. IEEE 802.11N MODULATION SCHEME .................................................................................................... 8 2.4. RELATED SUBMITTAL(S) / GRANT (S) .................................................................................................... 8 2.5. TEST METHODOLOGY ............................................................................................................................. 8 2.6. SPECIAL ACCESSORIES ......................................................................................................................... 8 2.7. EQUIPMENT MODIFICATIONS ................................................................................................................. 8 2.8. ANTENNA REQUIREMENT....................................................................................................................... 9 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 10 4. DESCRIPTION OF TEST MODES ................................................................................................................. 11 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 12 5.1. CONFIGURATION OF EUT SYSTEM ...................................................................................................... 12 5.2. EQUIPMENT USED IN EUT SYSTEM ..................................................................................................... 12 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 12 6. TEST FACILITY .............................................................................................................................................. 13 7. OUTPUT POWER ........................................................................................................................................... 14 7.1. MEASUREMENT PROCEDURE ............................................................................................................. 14 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 14 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 15 8. BANDWIDTH .................................................................................................................................................. 16 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 16 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 17 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 28 9.1. MEASUREMENT PROCEDURE ............................................................................................................. 28 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 28 9.3. MEASUREMENT EQUIPMENT USEDJN ................................................................................................ 28 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 28 Report No.: AGC01110230210FE05 Page 4 of 68 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 40 10.1 MEASUREMENT PROCEDURE ............................................................................................................ 40 10.2 TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 40 10.3 MEASUREMENT EQUIPMENT USED ................................................................................................... 40 10.4 LIMITS AND MEASUREMENT RESULT ................................................................................................. 40 11. RADIATED EMISSION ................................................................................................................................. 46 11.1. MEASUREMENT PROCEDURE............................................................................................................ 46 11.2. TEST SETUP ..........................................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 58 FCC Test Report Report No.: AGC01110230210FE02 FCC ID : 2AOKB-T9150 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Scale BRAND NAME : eufy MODEL NAME : T9150 APPLICANT : Anker Innovations Limited DATE OF ISSUE : Apr. 03, 2023 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.1 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC01110230210FE02 Page 2 of 58 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Feb. 27, 2023 Invalid Initial Release V1.1 1 st Apr. 03, 2023 Valid Revise Report Report No.: AGC01110230210FE02 Page 3 of 58 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................................... 6 2.3. RELATED SUBMITTAL(S)/GRANT(S) ....................................................................................................... 7 2.4. TEST METHODOLOGY ............................................................................................................................. 7 2.5. SPECIAL ACCESSORIES .......................................................................................................................... 7 2.6. EQUIPMENT MODIFICATIONS ................................................................................................................. 7 2.7. ANTENNA REQUIREMENT ....................................................................................................................... 7 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 8 4. DESCRIPTION OF TEST MODES ................................................................................................................... 9 5. SYSTEM TEST CONFIGURATION ................................................................................................................ 10 5.1. CONFIGURATION OF TESTED SYSTEM ............................................................................................... 10 5.2. EQUIPMENT USED IN TESTED SYSTEM .............................................................................................. 10 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 10 6. TEST FACILITY .............................................................................................................................................. 11 7. PEAK OUTPUT POWER ................................................................................................................................ 12 7.1. MEASUREMENT PROCEDURE .............................................................................................................. 12 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 12 7.3. LIMITS AND MEASUREMENT RESULT .................................................................................................. 13 8. BANDWIDTH .................................................................................................................................................. 17 8.1. MEASUREMENT PROCEDURE .............................................................................................................. 17 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 17 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................... 17 9. CONDUCTED SPURIOUS EMISSION........................................................................................................... 24 9.1. MEASUREMENT PROCEDURE .............................................................................................................. 24 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 24 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................... 24 9.4. LIMITS AND MEASUREMENT RESULT .................................................................................................. 24 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ........................................................ 36 Report No.: AGC01110230210FE02 Page 4 of 58 10.1. MEASUREMENT PROCEDURE ............................................................................................................ 36 10.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 36 10.3. MEASUREMENT EQUIPMENT USED .................................................................................................. 36 10.4. LIMITS AND MEASUREMENT RESULT................................................................................................ 36 11. RADIATED EMISSION ................................................................................................................................. 40 11.1. MEASUREMENT PROCEDURE ............................................................................................................ 40 11.2. TEST SETUP .......................................................................................................................................... 41 11.3. LIMITS AND MEASUREMENT RESULT............................................................…

Text truncated - open the document above for the full version.

Report No.: AGC01110230210AP02 Page 1 of 2 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC01110230210AP02 Page 2 of 2 BT RF CONDUCTED TEST SETUP WIFI RF CONDUCTED TEST SETUP ****************************************End of Report*************************************