2AOKI-6161XWi-Fi/Bluetooth Combo Module

1 | P a g e Attestation Statements To: Federal Communications Commission Date: Feb. 28, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2AOKI-6161X] Product Name: [Wi-Fi/Bluetooth Combo Module] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Caixia Hu Title: Quality Manager Address: Anzhou Industrial Park, Mianyang, Sichuan, P.R.C Tel.: 15881437297 Email: [email protected] 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☐ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance  The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance  There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance  Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

Global Product Services & Consultation LLC 5129007 U.S. Agent Designation for Service of Process - Certification Attestation Letter 2/11/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AOKI-6161X FRN of Grantee: 0027073196 Per section 2.911(d)(7) of the FCC rules, Sichan AI-Link Technology Co.,Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Global Product Services and Consultation LLC FCC Registration Number (FRN): 0033406703 Physical U.S. Company Address: 328 W Palm Ave. Monrovia, CA91016, United States Contact Person: Michael Chan Agent Email Address: [email protected] Tel: (626) 366-4358 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed: Signed: Printed name: Caixia Hu Company: Sichan AI-Link Technology Co.,Ltd. Address: Anzhou Industrial Park, Mianyang, Sichuan, P.R. China Date: 2/10/2026 Signed: Printed name: Michael Chan Title: Technical Director Company Name: Global Product Services and Consultation LLC Date: 2/11/2026

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-02-28 Subject; Modular Transmitter Application Company name: Sichuan AI-Link Technology Co., Ltd. FCC ID: 2AOKI-6161X Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 ‘Module Certification Guide v04r02; and FCC KDB 996369 D03 OEM Manual v01r01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID: 2AOKI-6161X has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Yes, the modular transmitter has shield. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. Yes, the modular transmitter has buffered modulation/data inputs ensure compliance with Part 15 under conditions of excessive data rates or over-modulation. All inputs are buffered through logic or microprocessor inputs. The module must contain power supply regulation on the module. Yes, the modular transmitter has its own power supply regulation in the form of a low drop-out regulator providing supply voltage to the board independently if the board is powered by the on-board battery or an external source. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Yes, Antenna permanently attached. The module must demonstrate compliance in a stand-alone configuration. Yes, the module complies to Part 15 in a stand-alone configuration The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). Yes, the modular transmitter is labelled with its own FCC ID number. Because the modular transmitter may be installed inside another device, rendering its own label invisible, the integration guide of the modular transmitter informs that the host device must visibly display the necessary text (Contains FCC ID: 2AVQS-17WFM26Y) on the outside of the finished product. The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Yes, the module is compliant with all applicable FCC rules. Instructions for maintaining compliance are given in the integration guide. The module must comply with RF exposure requirements Yes, the module is compliant with all applicable RF exposure requirements. Please see RF Exposure Report. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01r01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Ref Sect Requirements of KDB 996369 D03 User Manual Page Number reference 2.2 List of applicable FCC rules 2.3 Summarize the specific operational use conditions 2.4 Limited module procedures 2.5 Trace antenna designs 2.6 RF exposure considerations 2.7 Antennas 2.8 Label and compliance information 2.9 Information on test modes and additional testing requirements 2.10 Additional testing, Part 15 Subpart B disclaimer 2.11 Note EMI Considerations 2.12 How to make changes Name: Caixia Hu Date: Feb. 28, 26 Title: Quality Manager Signature of applicant

Feb. 28, 26 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2AOKI-6161X Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description ⎯ (Etc.) The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. ⎯ User Manual ⎯ Internal Photos ⎯ External Photos ⎯ Test Setup Photos ⎯ (Etc.) Sincerely, (Signature) Title: Quality Manager Address: Anzhou Industrial Park, Mianyang, Sichuan, P.R.C Tel.: 15881437297 Email: [email protected]

Date: 2026-02-11 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2AOKI-6161X I, the undersigned, hereby authorize (TÜV Rheinland (Guangdong) Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (TÜV Rheinland (Guangdong) Co., Ltd.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Sichuan AI-Link Technology Co.,Ltd.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) Printed Name: Caixia Hu Title: Quality Manager Tel: 15881437297 Fax: +86-0816-2438701 Email: [email protected]

lable 显示方式：镭雕

Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN266OWH 002 Seite 1 von 2 Page 1 of 2 1. Safety Human Exposure 1.1 Radio Frequency Exposure Compliance Electromagnetic Fields RESULT: Pass Test Specification Test item : Wi-Fi/Bluetooth Combo Module Identification / Type No. : BL616C50IX29P00 FCC ID : 2AOKI-6161X Test standard : CFR47 FCC Part 2: Section 2.1091 CFR47 FCC Part 1: Section 1.1310 FCC KDB Publication 447498 v07 ➢ Product Classification This device defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at 20 cm is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. Max 1.10 dBi for Bluetooth & Max 1.10 dBi for 2.4GHz Wi-Fi ➢ Radio Frequency Exposure Limit For FCC: Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm²) 300-1,500 -- -- f/1500 1,500-100,000 -- -- 1.0 ➢ Radio Frequency Exposure Calculation Formula Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN266OWH 002 Seite 2 von 2 Page 2 of 2 a) EUT RF Exposure Evaluation standalone operations Mode Maximum Conducted power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm²) FCC Limit (mW/cm²) Bluetooth 6.48 1.1 20 0.0011 1.0 2.4G Wi-Fi 17.59 1.1 20 0.0147 1.0 Note: 1. *Bluetooth RF Output Power: Refer to CN266OWH 001 2. *2.4GHz Band Wi-Fi RF Output Power: Refer CN266OWH 001 b) Simultaneous transmission MPE: Per KDB 447498 D01 v07, simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on calculated or measured field strengths or power density, is ≤ 1.0. Simultaneous transmission Scenarios Simultaneous transmission Scenarios Sum for the MPE ratio Limit Verdict Bluetooth + 2.4GHz Wi-Fi 0.0011/1+0.0147/1=0.0158 1.0 Compliance ➢ Conclusion Therefore the maximum calculations result of above are meet the requirement of Radio Frequency Exposure (MPE) limit.

Shenzhen Yishengbang Technology Co., Ltd Antenna Test Report 1 1. Product Overview 2 PCB ANT 2. Test Result WIFI 1 Antenna VSWR/S11 2. Test Result WIFI Antenna Gain/Efficiency/3D DATA Frequency (MHz) Efficiency (dBi) Gain (dBi) Efficiency (%) 2400.0 -5.86 0.25 35.93 2410.0 -5.39 0.30 35.90 2420.0 -4.92 0.78 36.18 2430.0 -4.64 1.08 36.33 2440.0 -4.49 1.06 38.52 2450.0 -4.47 1.10 39.73 2460.0 -4.65 0.83 37.30 2470.0 -4.79 0.80 37.17 2480.0 -4.78 0.85 36.30 2490.0 -5.29 0.48 36.55 2500.0 -5.73 0.22 36.72 3. Conclusions

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN266OWH 001 Auftrags-Nr.: Order no.: 170450662 Seite 1 von 20 Page 1 of 20 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2026-01-15 Auftraggeber: Client: Sichuan AI-Link Technology Co.,Ltd. Anzhou Industrial Park, Mianyang, Sichuan, P.R. China Prüfgegenstand: Test item: Wi-Fi/Bluetooth Combo Module Bezeichnung / Typ-Nr.: Identification / Type no.: BL616C50IX29P00 Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: FCC CFR Title 47, Part 15, Subpart C, Section 15.247 Wareneingangsdatum: Date of sample receipt: 2026-01-15 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A004188772-001~003 Prüfzeitraum: Testing period: Refer to test report Ort der Prüfung: Place of testing: Refer to section 2.1 Prüflaboratorium: Testing laboratory: TÜV Rheinland (Guangdong) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: Signed by: Amy Wang genehmigt von: authorized by: Signed by: Storm Shu Datum: Date: 2026-02-12 Ausstellungsdatum: Issue date: 2026-02-12 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: 2AOKI-6161X Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: 1 = sehr gut 2 = gut 3 = befriedigend 4 = ausreichend 5 = mangelhaft P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: 1 = very good 2 = good 3 = satisfactory 4 = sufficient 5 = poor P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Guangdong) Ltd. No.199 Kezhu Road, Guangzhou Science City, Guangzhou 510663, Guangdong Province P.R. China Mail: [email protected] · Web: www.tuv.com V101023GCNSR Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN266OWH 001 Page 2 of 20 Seite 2 von 20 Anmerkungen Remarks 1 The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. 2 As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. 3 Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. 4 The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 of this report or requested by the customer. This means that measurement uncertainty is not taken in account and hence also not declared in the test report. For additional information to the resulting risk based of this decision rule please refer to ILAC G8:2019. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas a…

Text truncated - open the document above for the full version.

Produkte Products Appendix B CN266OWH 001 Page 52 of 83 Tx. Spurious NVNT ax40 2437MHz Emission Tx. Spurious NVNT ax40 2452MHz Ref Tx. Spurious NVNT ax40 2452MHz Emission Produkte Products Appendix B CN266OWH 001 Page 53 of 83 Radiated Spurious Emission, 30MHz - 1GHz Project: LGT26A156 Test Engineer: zhangchengxiang EUT: Wi-Fi/Bluetooth Combo Module Temperature: 24.2°C M/N: BL616C50IX29P00 Humidity: 50%RH Test Voltage: DC 3.3V Test Data: 2026-01-27 Test Mode: TX 802.11b 2412 Note: No. Frequency MHz Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 43.580 2.85 21.02 23.87 40.00 -16.13 QP Hor 2* 123.120 4.66 19.66 24.32 43.50 -19.18 QP Hor 3* 164.830 5.09 21.43 26.52 43.50 -16.98 QP Hor 4* 297.114 15.30 21.90 37.20 46.00 -8.80 QP Hor 5* 610.666 5.07 29.78 34.85 46.00 -11.15 QP Hor 6* 781.508 5.99 32.31 38.30 46.00 -7.70 QP Hor No. Frequency MHz Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 52.431 3.92 20.80 24.72 40.00 -15.28 QP Ver 2* 164.951 8.11 21.40 29.51 43.50 -13.99 QP Ver 3* 295.780 15.73 21.84 37.57 46.00 -8.43 QP Ver 4* 466.379 7.39 26.69 34.08 46.00 -11.92 QP Ver 5* 506.755 6.21 27.76 33.97 46.00 -12.03 QP Ver 6* 905.546 5.97 34.38 40.35 46.00 -5.65 QP Ver Produkte Products Appendix B CN266OWH 001 Page 54 of 83 Radiated Spurious Emission, 1GHz - 18GHz Project: LGT26A156 Test Engineer: zhangyangda EUT: Wi-Fi/Bluetooth Combo Module Temperature: 19.3°C M/N: BL616C50IX29P00 Humidity: 55%RH Test Voltage: DC 3.3V Test Data: 2026-02-07 Test Mode: 802.11b 2412 Note: No. Frequency Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 1.6354GHz 62.42 -19.12 43.30 74.00 -30.70 PK Hor 2* 2.4121GHz 73.60 -10.95 62.65 / / PK Hor 3* 4.3787GHz 56.01 -6.11 49.90 74.00 -24.10 PK Hor 4* 5.0141GHz 56.48 -6.06 50.42 74.00 -23.58 PK Hor 5* 9.0155GHz 59.05 -7.01 52.04 74.00 -21.96 PK Hor 6* 13.7330GHz 52.58 -1.18 51.40 74.00 -22.60 PK Hor 7* 17.7747GHz 53.34 1.81 55.15 74.00 -18.85 PK Hor 8* 17.7747GHz 42.49 1.81 44.30 54.00 -9.70 AV Hor No. Frequency Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 1.6354GHz 61.28 -19.12 42.16 74.00 -31.84 PK Ver 2* 2.4121GHz 68.50 -10.95 57.55 / / PK Ver 3* 4.5041GHz 54.97 -5.60 49.37 74.00 -24.63 PK Ver 4* 6.5144GHz 58.06 -7.48 50.58 74.00 -23.42 PK Ver 5* 8.4184GHz 60.16 -7.57 52.59 74.00 -21.41 PK Ver 6* 13.7436GHz 52.10 -1.16 50.94 74.00 -23.06 PK Ver 7* 17.8895GHz 52.13 2.23 54.36 74.00 -19.64 PK Ver 8* 17.8895GHz 42.87 2.23 45.10 54.00 -8.90 AV Ver Produkte Products Appendix B CN266OWH 001 Page 55 of 83 Project: LGT26A156 Test Engineer: zhangyangda EUT: Wi-Fi/Bluetooth Combo Module Temperature: 19.3°C M/N: BL616C50IX29P00 Humidity: 55%RH Test Voltage: DC 3.3V Test Data: 2026-02-07 Test Mode: 802.11b 2437 Note: No. Frequency Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 1.7926GHz 61.05 -17.29 43.76 74.00 -30.24 PK Hor 2* 2.4376GHz 77.45 -10.71 66.74 / / PK Hor 3* 4.8399GHz 55.51 -5.88 49.63 74.00 -24.37 PK Hor 4* 7.1774GHz 58.55 -7.06 51.49 74.00 -22.51 PK Hor 5* 8.4417GHz 58.85 -7.55 51.30 74.00 -22.70 PK Hor 6* 13.6841GHz 52.61 -1.26 51.35 74.00 -22.65 PK Hor 7* 17.9341GHz 53.16 2.39 55.55 74.00 -18.45 PK Hor 8* 17.9341GHz 42.91 2.39 45.30 54.00 -8.70 AV Hor No. Frequency Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 1.6311GHz 61.84 -19.17 42.67 74.00 -31.33 PK Ver 2* 2.4376GHz 72.41 -10.71 61.70 / / PK Ver 3* 3.4076GHz 56.15 -8.27 47.88 74.00 -26.12 PK Ver 4* 6.2190GHz 59.05 -7.77 51.28 74.00 -22.72 PK Ver 5* 8.9730GHz 58.29 -7.03 51.26 74.00 -22.74 PK Ver 6* 13.7479GHz 52.81 -1.15 51.66 74.00 -22.34 PK Ver 7* 17.8980GHz 53.31 2.26 55.57 74.00 -18.43 PK Ver 8* 17.8980GHz 43.24 2.26 45.50 54.00 -8.50 AV Ver Produkte Products Appendix B CN266OWH 001 Page 56 of 83 Project: LGT26A156 Test Engineer: zhangyangda EUT: Wi-Fi/Bluetooth Combo Module Temperature: 19.3°C M/N: BL616C50IX29P00 Humidity: 55%RH Test Voltage: DC 3.3V Test Data: 2026-02-07 Test Mode: 802.11b 2462 Note: No. Frequency Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 1.5695GHz 60.89 -19.80 41.09 74.00 -32.91 PK Hor 2* 2.4621GHz 76.42 -10.48 65.94 / / PK Hor 3* 3.5967GHz 55.09 -8.19 46.90 74.00 -27.10 PK Hor 4* 6.2572GHz 57.13 -7.73 49.40 74.00 -24.60 PK Hor 5* 9.1302GHz 57.02 -7.04 49.98 74.00 -24.02 PK Hor 6* 13.8222GHz 51.05 -1.02 50.03 74.00 -23.97 PK Hor 7* 17.9214GHz 51.30 2.34 53.64 74.00 -20.36 PK Hor 8* 17.9214GHz 41.76 2.34 44.10 54.00 -9.90 AV Hor No. Frequency Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 1.5461GHz 60.70 -20.00 40.70 74.00 -33.30 PK Ver 2* 2.4620GHz 67.13 -10.50 56.63 / / PK Ver 3* 4.2597GHz 53.36 -6.60 46.76 74.00 -27.24 PK Ver 4* 6.7141GHz 58.15 -7.32 50.83 74.00 -23.17 PK Ver 5* 8.9942GHz 57.60 -7.01 50.59 74.00 -23.41 PK Ver 6* 13.6692GHz 51.17 -1.29 49.88 74.00 -24.12 PK Ver 7* 17.7684GHz 51.53 1.78 53.31 74.00 -20.69 PK Ver 8* 17.7684GHz 41.32 1.78 43.10 54.00 -10.90 AV Ver Produkte Products Appendix B CN266OWH 001 Page 57 of 83 Project: LGT26A156 Test Engineer: zhangyangda EUT: Wi-Fi/Bluetooth Combo Module Temperature: 19.3°C M/N: BL616C50IX29P00 Humidity: 55%RH Test Voltage: DC 3.3V Test Data: 2026-02-07 Test Mode: 802.11g 2412 Note: No. Frequency Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 1.4951GHz 61.47 -20.44 41.03 74.00 -32.97 PK Hor 2* 2.4121GHz 74.12 -10.95 63.17 / / PK Hor 3* 3.8114GHz 54.59 -7.92 46.67 74.00 -27.33 PK Hor 4* 6.0107GHz 56.82 -7.97 48.85 74.00 -25.15 PK Hor 5* 8.4332GHz 58.53 -7.56 50.97 74.00 -23.03 PK Hor 6* 11.1915GHz 53.42 -4.11 49.31 74.00 -24.69 PK Hor 7* 17.9107GHz 52.09 2.30 54.39 74.00 -19.61 PK Hor 8* 17.9107GHz 42.00 2.30 44.30 54.00 -9.70 AV Hor No. Frequency Reading dBuV Factor dB/m Result dBuV/m Limit dBuV/m Margin dB Detector Polar 1* 1.6842GHz 61.30 -18.55 42.75 74.00 -31.25 PK Ver 2* 2.4121GHz 66.95 -10.95 56.00 / / PK Ver 3* 3.3587GHz…

Text truncated - open the document above for the full version.