2AOQ6-WR25WiFi Repeater

R R R R R R R FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. .

ChongQing Lavid Industrial Co., Ltd. No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-8-13 To whom it may concern: We, ChongQing Lavid Industrial Co., Ltd., hereby certify that the equipment for which authorization is sought (FCC ID: 2AOQ6-WR25) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Zhongping Liu N/A ChongQing Lavid Industrial Co., Ltd. 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

ChongQing Lavid Industrial Co., Ltd. No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-8-13 U.S. Agent Designation ChongQing Lavid Industrial Co., Ltd.acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2AOQ6-WR25): Name and company of U.S. agent:ACT Lab LLC Physical U.S. address of agent:3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent:0033465568 Email address of U.S. agent:[email protected] ACT Lab LLCacknowledges their obligation to accept service of process on behalf ofChongQing Lavid Industrial Co., Ltd.. ChongQing Lavid Industrial Co., Ltd.with the FRN[0027130202]accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Zhongping Liu N/A ChongQing Lavid Industrial Co., Ltd. Signature Scott Huber Senior Technical Director ACT Lab LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

ChongQing Lavid Industrial Co., Ltd. Add: No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Date: 2024-8-13 FCC ID: 2AOQ6-WR25 Dear Sir/Madam, We, ChongQing Lavid Industrial Co., Ltd. Hereby declares the following statement for Federal Communications Commission, PCB board, circuit, structure and internal of these model(s) are the same, only difference is appearance color: Product name: WiFi Repeater Model no.: WR25, WR22, WR23, WR33, WR35, WR22T Sincerely, Name/Title： Zhongping Liu/N/A Company: ChongQing Lavid Industrial Co., Ltd. Address: No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Phone: +86 13927487922 Fax: 0755-23029901 E-Mail: [email protected]

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2024-8-13> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2AOQ6-WR25 WR25 For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Zhongping Liu/N/A Company: ChongQing Lavid Industrial Co., Ltd. Address: No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Phone: +86 13927487922 Fax: 0755-23029901 E-Mail: [email protected]

ChongQing Lavid Industrial Co., Ltd. No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Date: 2024-8-13 FCC ID: 2AOQ6-WR25 Model Number: WR25 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To Whom It May Concern, We, ChongQing Lavid Industrial Co., Ltd., declare that this EUT (FCC ID: 2AOQ6-WR25) doesn’t have Ad Hoc mode function on “non-US/Canada frequencies”. In addition. The frequency selection feature is disabled by firmware for devices marked to the US/Canada. For DTS part of this device, only channels 1-11 will be used in North America, Country code selection is disabled. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, Name/Title： Zhongping Liu/N/A Company: ChongQing Lavid Industrial Co., Ltd. Address: No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Phone: +86 13927487922 Fax: 0755-23029901 E-Mail: [email protected]

ChongQing Lavid Industrial Co., Ltd. No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-8-13 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2AOQ6-WR25 including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Zhongping Liu/N/A Company: ChongQing Lavid Industrial Co., Ltd. Address: No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Phone: +86 13927487922 Fax: 0755-23029901 E-Mail: [email protected]

FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT

FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Appendix IID Label Appendix II ID Label Location WiFi Repeater FCC ID: 2AOQ6-WR25 Model: WR25

FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 7 Internal of EUT Photo 8 Internal of EUT FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Photo 9 Appearance of PCB Photo 10 Appearance of PCB FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Photo 11 Appearance of PCB Photo 12 Appearance of PCB Antenna1 Antenna2 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Photo 13 Appearance of PCB

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202405-0242-8 Page: 1 of 4 TB-RF-073-3.0 1/F., Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2AOQ6-WR25 1. Client Information Applicant : ChongQing Lavid Industrial Co., Ltd. Address : No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China Manufacturer : ChongQing Lavid Industrial Co., Ltd. Address : No.2 Workshop, Electronic and Electrical Manufacturing Base, Union Community, Chenjiaba Street, Wanzhou District, Chongqing, China 2. General Description of EUT EUT Name : WiFi Repeater Models No. : WR25, WR22, WR23, WR33, WR35, WR22T Model Difference : All these models are identical in the same PCB, layout and electrical circuit, the only difference is appearance color. Sample ID : HC-C-202405-0242-04-01-1#&HC-C-202405-0242-04-01-2# Product Description : Operation Frequency: 802.11b/g/n(HT20): 2412MHz~2462MHz Antenna Gain: 3.0dBi FPC Antenna1 3.0dBi FPC Antenna2 Power Rating : Input: AC 120V/60Hz Software Version : V122_127 Hardware Version : V2.0 Connecting I/O Port(S) : Please refer to the User's Manual Remark : the MPE report used the EUT-2(HC-C-202405-0242-04-01-2#). Report No.: TBR-C-202405-0242-8 Page: 2 of 4 TB-RF-074-1. 0 MPE Calculations for FCC 1. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 2. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 3. Simultaneous transmission MPE Considerations According to KDB447498: All transmitters and antennas in the host must be either evaluated for MPE compliance, by measurement or computational modeling, or qualify for the standalone MPE test exclusion in section 7.1. Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. This means that: ∑ of MPE ratios ≤ 1.0 Report No.: TBR-C-202405-0242-8 Page: 3 of 4 TB-RF-074-1. 0 4. Standalone MPE Evaluation: 2.4G WIFI Worst Maximum MPE Result Antenna1 Mode N TX Freq. (MHz) Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/cm 2 ) [S] 802.11b 1 2412 18.83 18±1 19 3.0 20 0.03153 2437 18.82 18±1 19 3.0 20 0.03153 2462 18.53 18±1 19 3.0 20 0.03153 802.11g 1 2412 16.08 16±1 17 3.0 20 0.01989 2437 16.82 16±1 17 3.0 20 0.01989 2462 15.40 15±1 16 3.0 20 0.01580 802.11n (HT20) 1 2412 14.54 14±1 15 3.0 20 0.01255 2437 14.99 14±1 15 3.0 20 0.01255 2462 14.23 14±1 15 3.0 20 0.01255 Note: N TX = Number of Transmit Antennas RF Output power specifies that Maximum Conducted Peak Output Power. 2.4G WIFI Worst Maximum MPE Result Antenna2 Mode N TX Freq. (MHz) Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/cm 2 ) [S] 802.11b 1 2412 18.52 18±1 19 3.0 20 0.03153 2437 17.69 17±1 18 3.0 20 0.02504 2462 18.47 18±1 19 3.0 20 0.03153 802.11g 1 2412 15.22 15±1 16 3.0 20 0.01580 2437 15.27 15±1 16 3.0 20 0.01580 2462 14.23 14±1 15 3.0 20 0.01255 802.11n (HT20) 1 2412 14.57 14±1 15 3.0 20 0.01255 2437 13.83 13±1 14 3.0 20 0.00997 2462 14.62 14±1 15 3.0 20 0.01255 Note: N TX = Number of Transmit Antennas RF Output power specifies that Maximum Conducted Peak Output Power. Report No.: TBR-C-202405-0242-8 Page: 4 of 4 TB-RF-074-1. 0 Remark: 1. Output power including turn-up tolerance; 2. Output power was adjust to duty cycle at 100% if measured duty cycle less than 98%; 3. MPE evaluate distance is 20cm from user manual provide by manufacturer. 4. Only the worst power was evaluated for each wireless function 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Power density (mW/ cm 2 ) 300-1,500 F/1500 1,500-100,000 1.0 6. Summary simultaneous transmission information The sample supports two antennas for 2.4G WIFI Antenna1 and 2.4G WIFI Antenna2. The 2.4G WIFI Antenna1 and 2.4G WIFI Antenna2 can transmit simultaneous. The 2.4G WIFI Antenna with two different Antenna. According to KDB447498 for Transmitters used in mobile exposure conditions for simultaneous transmission operations; ∑ of MPE ratios ≤ 1.0 7. Summary simultaneous transmission results 2.4G WIFI Antenna1 + 2.4G WIFI Antenna2 Maximum Simultaneous transmission MPE Ratios is 0.03153+0.03153=0.06306≤1.0. 8. Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device. -----END OF THE REPORT-----

Antenna Test Report Features•IEEE 802.1 b/g/n standard•High isolation•Small form factor•On ‐ board mount •Quick integration Specification Frequency (MHz) 2400 ‐ 2500 Peak Gain (dBi) 3 .0 VSWR 2.0 : 1 Isolation (dB) ‐ 10 Impedance (Ohms) 50 Power (Watts) 1 Efficiency 50%~60% Dimension(mm) 28.5x8.8x0.3 Manufacturer ： Shenzhen megahertz technology co., ltd Add:Shenshan Road, Longdong Community, Baolong Street, Longgang District, Shenzhen City,China GAIN TABLE Frequency Efficiency Avg. Gain Peak Gain 2400MHz 54% -2.7 3. 0 2450MHz 58% -2.4 2 .5 2500MHz 64% -2.0 2 .1 14.67mm 8.39mm PAT TERN

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 1 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 RF Test Data for 2.4G Wi-Fi (Conducted Measurements) General Description of EUT EUT Name: WiFi Repeater Model: WR25 Sample ID: HC-C-202405-0242-04-01-2# Test Standard: FCC Part 15.247 Environmental Conditions Ambient Temperature: 24.9°C Ambient Humidity: 45%RH Test Power Supply: AC 120V Test Engineer: Jolin Lee Note: For a more detailed features description, please refer to the report TBR-C-202405-0242-7 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 2 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 Contents 1: DTS Bandwidth ............................................................................................................................................... 3 1.1Test Result .......................................................................................................................................... 3 1.2 Test Graphs ....................................................................................................................................... 4 2: Occupied Channel Bandwidth ....................................................................................................................... 7 2.1 Test Result ......................................................................................................................................... 7 2.2 Test Graphs ....................................................................................................................................... 8 3: Maximum conducted output power ............................................................................................................ 11 3.1 Test Result Average ....................................................................................................................... 11 4: Maximum power spectral density ............................................................................................................... 12 4.1 Test Result ....................................................................................................................................... 12 4.2 Test Graphs ..................................................................................................................................... 13 5: Band edge measurements ........................................................................................................................... 16 5.1 Test Result ....................................................................................................................................... 16 5.2 Test Graphs ..................................................................................................................................... 17 6: Conducted Spurious Emission...................................................................................................................... 19 6.1 Test Result ....................................................................................................................................... 19 6.2 Test Graphs ..................................................................................................................................... 21 7: Duty Cycle .................................................................................................................................................... 30 7.1 Test Result ....................................................................................................................................... 30 7.2 Test Graphs ..................................................................................................................................... 31 8: Emissions in Restricted Bands ...................................................................................................................... 35 8.1 Test Result ....................................................................................................................................... 35 8.2 Test Graphs ..................................................................................................................................... 38 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 3 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 1: DTS Bandwidth 1.1Test Result TestMode Ant. Frequency [MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B-CDD Ant1 2412 8.32 2407.80 2416.12 0.5 PASS 11B-CDD Ant2 2412 8.96 2407.60 2416.56 0.5 PASS 11B-CDD Ant1 2437 8.32 2432.80 2441.12 0.5 PASS 11B-CDD Ant2 2437 8.32 2432.80 2441.12 0.5 PASS 11B-CDD Ant1 2462 8.32 2457.80 2466.12 0.5 PASS 11B-CDD Ant2 2462 8.32 2457.80 2466.12 0.5 PASS 11G-CDD Ant1 2412 15.08 2404.44 2419.52 0.5 PASS 11G-CDD Ant2 2412 15.68 2404.44 2420.12 0.5 PASS 11G-CDD Ant1 2437 15.12 2429.44 2444.56 0.5 PASS 11G-CDD Ant2 2437 13.84 2430.68 2444.52 0.5 PASS 11G-CDD Ant1 2462 15.12 2454.44 2469.56 0.5 PASS 11G-CDD Ant2 2462 15.08 2454.44 2469.52 0.5 PASS 11N20MIMO Ant1 2412 15.12 2404.36 2419.48 0.5 PASS 11N20MIMO Ant2 2412 15.08 2404.36 2419.44 0.5 PASS 11N20MIMO Ant1 2437 16.28 2428.76 2445.04 0.5 PASS 11N20MIMO Ant2 2437 16.32 2428.76 2445.08 0.5 PASS 11N20MIMO Ant1 2462 16.36 2453.72 2470.08 0.5 PASS 11N20MIMO Ant2 2462 12.60 2455.60 2468.20 0.5 PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 4 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 1.2 Test Graphs 11B-CDD-Ant1-2412-PASS 11B…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 23 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 11B-CDD-Ant1-2462-0~Reference-PASS 11B-CDD-Ant1-2462-30~1000-PASS 11B-CDD-Ant1-2462-1000~26500-PASS 11B-CDD-Ant2-2462-0~Reference-PASS 11B-CDD-Ant2-2462-30~1000-PASS 11B-CDD-Ant2-2462-1000~26500-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 24 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 11G-CDD-Ant1-2412-0~Reference-PASS 11G-CDD-Ant1-2412-30~1000-PASS 11G-CDD-Ant1-2412-1000~26500-PASS 11G-CDD-Ant2-2412-0~Reference-PASS 11G-CDD-Ant2-2412-30~1000-PASS 11G-CDD-Ant1-2437-0~Reference-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 25 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 11G-CDD-Ant1-2437-30~1000-PASS 11G-CDD-Ant1-2437-1000~26500-PASS 11G-CDD-Ant2-2437-0~Reference-PASS 11G-CDD-Ant2-2437-30~1000-PASS 11G-CDD-Ant2-2437-1000~26500-PASS 11G-CDD-Ant1-2462-0~Reference-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 26 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 11G-CDD-Ant1-2462-30~1000-PASS 11G-CDD-Ant1-2462-1000~26500-PASS 11G-CDD-Ant2-2462-0~Reference-PASS 11G-CDD-Ant2-2462-30~1000-PASS 11G-CDD-Ant2-2462-1000~26500-PASS 11N20MIMO-Ant1-2412-0~Reference-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 27 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 11N20MIMO-Ant1-2412-30~1000-PASS 11N20MIMO-Ant1-2412-1000~26500-PASS 11N20MIMO-Ant2-2412-0~Reference-PASS 11N20MIMO-Ant2-2412-30~1000-PASS 11N20MIMO-Ant2-2412-1000~26500-PASS 11N20MIMO-Ant1-2437-0~Reference-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 28 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 11N20MIMO-Ant1-2437-30~1000-PASS 11N20MIMO-Ant1-2437-1000~26500-PASS 11N20MIMO-Ant2-2437-0~Reference-PASS 11N20MIMO-Ant2-2437-30~1000-PASS 11N20MIMO-Ant2-2437-1000~26500-PASS 11N20MIMO-Ant1-2462-0~Reference-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 29 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 11N20MIMO-Ant1-2462-30~1000-PASS 11N20MIMO-Ant1-2462-1000~26500-PASS 11N20MIMO-Ant2-2462-0~Reference-PASS 11N20MIMO-Ant2-2462-30~1000-PASS 11N20MIMO-Ant2-2462-1000~26500-PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 30 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 7: Duty Cycle 7.1 Test Result TestMode Antenna Frequency [MHz] Transmission Duration [ms] Transmission Period [ms] Duty Cycle [%] DC Factory 1/T [kHz] 11B-CDD Ant1 2412 0.97 1.18 82.20 0.85 1.03 11B-CDD Ant2 2412 0.96 1.15 83.48 0.78 1.04 11B-CDD Ant1 2437 0.97 1.16 83.62 0.78 1.03 11B-CDD Ant2 2437 0.96 1.08 88.89 0.51 1.04 11B-CDD Ant1 2462 0.97 1.17 82.91 0.81 1.03 11B-CDD Ant2 2462 0.97 1.13 85.84 0.66 1.03 11G-CDD Ant1 2412 0.18 0.35 51.43 2.89 5.56 11G-CDD Ant2 2412 0.18 0.31 58.06 2.36 5.56 11G-CDD Ant1 2437 0.18 0.37 48.65 3.13 5.56 11G-CDD Ant2 2437 0.18 0.35 51.43 2.89 5.56 11G-CDD Ant1 2462 0.18 0.39 46.15 3.36 5.56 11G-CDD Ant2 2462 0.18 0.31 58.06 2.36 5.56 11N20MIMO Ant1 2412 1.44 1.62 88.89 0.51 0.69 11N20MIMO Ant2 2412 1.44 1.64 87.80 0.57 0.69 11N20MIMO Ant1 2437 1.44 1.61 89.44 0.48 0.69 11N20MIMO Ant2 2437 1.44 1.53 94.12 0.26 0.69 11N20MIMO Ant1 2462 1.44 1.61 89.44 0.48 0.69 11N20MIMO Ant2 2462 1.44 1.62 88.89 0.51 0.69 11N40MIMO Ant1 2422 1.44 1.59 90.57 0.43 0.69 Note: 1, Duty Cycle= Transmission Duration/ Transmission Period 2, DC Factory=10*Log 10 (1/Duty Cycle) 3, 1/T=1/ Transmission Duration Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 31 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 7.2 Test Graphs NTNV-11B-CDD-Ant1-2412 NTNV-11B-CDD-Ant2-2412 NTNV-11B-CDD-Ant1-2437 NTNV-11B-CDD-Ant2-2437 NTNV-11B-CDD-Ant1-2462 NTNV-11B-CDD-Ant2-2462 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 32 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 NTNV-11G-CDD-Ant1-2412 NTNV-11G-CDD-Ant2-2412 NTNV-11G-CDD-Ant1-2437 NTNV-11G-CDD-Ant2-2437 NTNV-11G-CDD-Ant1-2462 NTNV-11G-CDD-Ant2-2462 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 33 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 NTNV-11N20MIMO-Ant1-2412 NTNV-11N20MIMO-Ant2-2412 NTNV-11N20MIMO-Ant1-2437 NTNV-11N20MIMO-Ant2-2437 NTNV-11N20MIMO-Ant1-2462 NTNV-11N20MIMO-Ant2-2462 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0242-7 Page: 34 of 41 FCC ID: 2AOQ6-WR25 TB-RF-074-1.0 NTNV-11N…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202405-0242-7 Page: 1 of 41 TB-RF-074-1.0 1/F., Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Test Report FCC ID: 2AOQ6-WR25 Report No. : TBR-C-202405-0242-7 Applicant : ChongQing Lavid Industrial Co., Ltd. Equipment Under Test (EUT) EUT Name : WiFi Repeater Model No. : WR25 Series Model No. : WR22, WR23, WR33, WR35, WR22T Brand Name : PIX-LINK Sample ID : HC-C-202405-0242-04-01-1#&HC-C-202405-0242-04-01-2# Receipt Date : 2024-07-23 Test Date : 2024-07-23 to 2024-08-12 Issue Date : 2024-08-13 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10:2013 KDB 558074 D01 15.247 Meas Guidance v05r02 KDB 662911 D01 Multiple Transmitter Output v02r01 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : Jolin Lee Reviewed By : Wade. Lv Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202405-0242-7 Page: 2 of 41 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT..................................................................…

Text truncated - open the document above for the full version.