2AOWF-ARCADE8BitDo Arcade Stick

8BitDo Arcade Stick Instruction Manual * power off: turn the mode switch to OFF * connection priority: wired connection > 2.4g wireless / Bluetooth connection Switch * motion controls, NFC scanning, IR camera, HD rumble, notif ication LED are not suppor ted, nor can the system be waken up wirelessly 2.4g connection 1. put the connection switch to 2.4G 2. turn the mode switch to S mode, LEDs star t to blink 3. plug the receiver into the USB por t on Switch. Arcade stick will auto connect to the receiver 4. LEDs on both the arcade stick and receiver will become solid when connection is successful * press home button to continue to use the arcade stick when it is already on S mode * Switch system needs to be 3.0.0 or above for 2.4g connection. Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication Bluetooth connection 1. put the connection switch to BT 2. turn the mode switch to S mode, LEDs star t to blink 3. press and hold pair button for 3 seconds to enter its pairing mode, LEDs star t to rotate clockwise (this is required for the ver y f irst time only) 4. go to your Switch Home Page to click on Controllers, then click on Change Grip/Order 5. LED becomes solid when connection is successful * press home button to continue to use the arcade stick when it is already on S mode. * arcade stick will auto reconnect to your Switch on S mode once it has been paired. wired connection 1. turn the mode switch to S mode, LEDs star t to blink 2. connect the arcade stick to your Switch dock via its USB-C cable 3. wait till the arcade stick is successfully recognized by your Switch to play * Switch system needs to be 3.0.0 or above for wired connection. Go to System Setting > Controller and Sensors > turn on Pro Controller Wired Communication * LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2, 4 is the maximum number of players the arcade stick suppor ts Windows (X-input) 2.4g connection 1. put the connection switch to 2.4G 2. turn the mode switch to X mode, LEDs star t to blink 3. plug the receiver into the USB por t on your Windows device. Arcade stick will auto connect to the receiver 4. LEDs on both the arcade stick and receiver will become solid when connection is successful * press home button to continue to use the arcade stick when it is already on X mode. Bluetooth connection * required system: Windows 10 (1703) or above. Bluetooth 4.0 is suppor ted 1. put the connection switch to BT 2. turn the mode switch to X mode, LEDs star t to blink 3. press and hold pair button for 3 seconds to enter its pairing mode, LEDs star t to rotate clockwise (this is required for the ver y f irst time only) 4. go to your Windows device’s Bluetooth setting, pair with 8BitDo Arcade Stick 5. LED becomes solid when connection is successful * press home button to continue to use the arcade stick when it is already on X mode * arcade stick will auto reconnect to Windows on X mode once it has been paired wired connection 1. turn the mode switch to X mode, LEDs star t to blink 2. connect the arcade stick to your Windows device via its USB-C cable 3. wait till the arcade stick is successfully recognized by your Windows device to play * LED lights indicate the player number, 1 LED indicates player 1, 2 LEDs indicate player 2, 4 is the maximum number of players the arcade stick suppor ts Turbo function 1. hold the button you would like to set turbo functionality to and then press star button to activate its turbo functionality 2. LED will blink when the button with turbo functionality is pressed 3. hold the button with turbo functionality f irst then press star button to deactivate its turbo functionality, LED will cease to blink * joystick , home, select and star t buttons are not included control stick switch use the control stick switch to shif t the joystick function to either lef t joystick(LS), directional pad (DP), or right joystick (RS) LS: Lef t joystick DP: D-pad RS: Right joystick customize profile It gives you elite control over ever y piece of your arcade stick : customize button mapping and create macros with any button combination. e.g. create macros and more with P1, P2 please visit suppor t.8bitdo.com/ultimate-software.html for the application battery status LED Indicator low batter y mode red LED blinks batter y charging red LED stays solid batter y fully charged red LED turns off built-in 1000mAh Li-on batter y with 40 hours of play time on 2.4g connection and 30 hours on Bluetooth connection rechargeable with 4 hour charging time arcade stick will turn off in 1 minute with no connection and 15 minutes with 2.4g wireless / Bluetooth connection but no use arcade stick stays on with wired connection retrieve a lost connection or connect to a new receiver 1. put the connection switch to 2.4G 2. turn the mode switch to S or X mode, LEDs star t to blink 3. plug the receiver into your Switch or Windows device 4. press and hold pair button for 3 seconds to enter its pairing mode, LEDs star t to rotate clockwise 5. LED becomes solid when connection is successful * 2.4g receiver can only connect to one arcade stick at a time support please visit suppor t.8bitdo.com for fur ther information and additional suppor t FCC regulatory conformance： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio c…

Text truncated - open the document above for the full version.

Annex No.: BL-SZ2080669-AW 1 / 5 EUT EXTERNAL PHOTOS FRONT VIEW OF EUT REAR VIEW OF EUT Annex No.: BL-SZ2080669-AW 2 / 5 LEFT SIDE VIEW OF EUT RIGHT SIDE OF EUT Annex No.: BL-SZ2080669-AW 3 / 5 TOP VIEW OF EUT CLOSE-UP Annex No.: BL-SZ2080669-AW 4 / 5 BOTTOM VIEW OF EUT Accessory-USB Cable Annex No.: BL-SZ2080669-AW 5 / 5 Accessory-Dongle

Label: Label location （On the back of the sample）:

Annex No.: BL-SZ2080669-AI 1 / 7 EUT INTERNAL PHOTOS EUT UNCOVER VIEW EUT UNCOVER VIEW Annex No.: BL-SZ2080669-AI 2 / 7 EUT UNCOVER VIEW MAIN BOARD TOP VIEW BT Antenna RF Chip 2.4G ISM Band Antenna Annex No.: BL-SZ2080669-AI 3 / 7 MAIN BOARD REAR VIEW SECONDARY BOARD 1 TOP VIEW Annex No.: BL-SZ2080669-AI 4 / 7 SECONDARY BOARD 1 REAR VIEW SECONDARY BOARD 2 TOP VIEW Annex No.: BL-SZ2080669-AI 5 / 7 SECONDARY BOARD 2 REAR VIEW SECONDARY BOARD 3 TOP VIEW Annex No.: BL-SZ2080669-AI 6 / 7 SECONDARY BOARD 3 REAR VIEW Battery Photo (FRONT) Annex No.: BL-SZ2080669-AI 7 / 7 Battery Photo (REAR)

RF Exposure Evaluation for FCC ID: 2AOWF‐ARCADE Refer user manual this device is a 8BitDo Arcade Stick, and this device was designed used in portable devices that the minimum distance between human’s body is 5mm. Based on the 47CFR 2.1093, this device belongs to portable device. The definition of the category as following: Portable Derives: CFR Title 47 §2.1093(b) (b) For purposes of this section, a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. FCC KDB 447498 D01 General RF Exposure Guidance v06 Limit Unless specifically required by the published RF exposure KDB procedures, standalone 1‐g head or body and 10‐g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source‐ based time‐averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune‐up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. The 1‐g and 10‐g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune‐up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz) ] ≤ 3.0 for 1‐g SAR and ≤ 7.5 for 10‐g extremity SAR Where • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Test data Bluetooth Mode BR+EDR GFSK ∏/4-DQPSK 8-DPSK Peak Power (dBm) -9.53 -9.71 -9.72 Note: This report listed the worst case peak power value, please refer to RF test report for more details. 2.4G ISM Band (GFSK modulation) Mode Low Middle High Peak Power (dBm) -5.92 -5.94 -6.64 Note: This report listed the worst case peak power value, please refer to RF test report for more details. Turn-up power Mode Range (dBm) Bluetooth (-9.00)-(-9.00) FCC exclusion condition= [0.13 mW/5 mm] · [√2.48 GHz] = 0.043 ＜ 3.0 RF Exposure Evaluation Result: Pass Note: More power data, Please refer to the RF report. Mode Range (dBm) 2.4G ISM Band (GFSK modulation) (-6.00)-(-5.00) FCC exclusion condition= [0.32 mW/5 mm] · [√2.48 GHz] = 0.101 ＜ 3.0 RF Exposure Evaluation Result: Pass Note: More power data, Please refer to the RF report.

Report No.: BL-SZ2080669-602 2 / 53 Revision History Version Issue Date Revisions Content Rev. 01 Sep. 22, 2020 Initial Issue TABLE OF CONTENTS 1 ADMINISTRATIVE DATA (GENERAL INFORMATION) .......................................................................... 5 1.1 Identification of the Testing Laboratory ....................................................................................... 5 1.2 Identification of the Responsible Testing Location ...................................................................... 5 1.3 Laboratory Condition ................................................................................................................... 5 1.4 Announce .................................................................................................................................... 6 2 PRODUCT INFORMATION ...................................................................................................................... 7 2.1 Applicant Information ................................................................................................................... 7 2.2 Manufacturer Information ............................................................................................................ 7 2.3 Factory Information ..................................................................................................................... 7 2.4 General Description for Equipment under Test (EUT) ................................................................ 7 2.5 Technical Information .................................................................................................................. 8 2.6 Additional Instructions ............................................................................................................... 10 3 SUMMARY OF TEST RESULTS ............................................................................................................ 11 3.1 Test Standards .......................................................................................................................... 11 3.2 Verdict ....................................................................................................................................... 11 4 GENERAL TEST CONFIGURATIONS ................................................................................................... 12 4.1 Test Environments .................................................................................................................... 12 4.2 Test Equipment List ................................................................................................................... 12 4.3 Description of Test Setup .......................................................................................................... 13 4.3.1 For Antenna Port Test ............................................................................................................... 13 4.3.2 For AC Power Supply Port Test ................................................................................................ 14 4.3.3 For Radiated Test (Below 30 MHz) ........................................................................................... 14 4.3.4 For Radiated Test (30 MHz-1 GHz) .......................................................................................... 15 4.3.5 For Radiated Test (Above 1 GHz) ............................................................................................. 15 4.4 Measurement Results Explanation Example ............................................................................. 16 4.4.1 For conducted test items: .......................................................................................................... 16 Report No.: BL-SZ2080669-602 3 / 53 4.4.2 For radiated band edges and spurious emission test: ............................................................... 16 5 TEST ITEMS ........................................................................................................................................... 17 5.1 Antenna Requirements .............................................................................................................. 17 5.1.1 Relevant Standards ................................................................................................................... 17 5.1.2 Antenna Anti-Replacement Construction .................................................................................. 17 5.1.3 Antenna Gain ............................................................................................................................ 17 5.2 Number of Hopping Frequency ................................................................................................. 18 5.2.1 Limit ........................................................................................................................................... 18 5.2.2 Test Setup ................................................................................................................................. 18 5.2.3 Test Procedure .......................................................................................................................... 18 5.2.4 Test Result ................................................................................................................................ 18 5.3 Peak Output Power ................................................................................................................... 19 5.3.1 Test Limit ................................................................................................................................... 19 5.3.2 Test Setup ................................................................................................................................. 19 5.3.3 Test Procedure .......................................................................................................................... 19 5.3.4 Test Result ..........................................…

Text truncated - open the document above for the full version.

Annex No.: BL-SZ2080669-AR 1 / 4 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz 30MHz-1GHz Annex No.: BL-SZ2080669-AR 2 / 4 Close-up Above 1GHz Annex No.: BL-SZ2080669-AR 3 / 4 Close-up 2 Conducted Test Photo Conducted Test-BT Annex No.: BL-SZ2080669-AR 4 / 4 Conducted Test-2.4G