2AOWF-NG308BitDo NEOGEO Wireless Controller

NEOGEO Wireless ControllerNEOGEO 无线手柄 D - select home R star D-Pad L + start B A C D - select 键 home 键 R 星号键 方向键 L + start 键 B A C NEOGEO mini · press start button to turn on the controller · hold start button for 3 seconds to turn off the controller · hold start button for 8 seconds to force the controller off * 开机：按下 start 键。 * 关机：按住 start 键 3 秒。 * 强制关机：按住 start 键 8 秒。 · press and hold select + down to switch the button layout. The Power LED will blink once when switching, and it will be saved automatically NEOGEO mini * 可按住 select + 方向下键 切换按键布局，切换时 电源指示灯 会短暂闪烁 1 次，切换后会保存。 mode switch power LEDpair status LED 电源指示灯配对键 模式开关 状态指示灯 2.4G 接收器 无线连接 1. 将配备的 2.4G 接收器连接到 NEOGEO mini 主机的手柄端口。 2. 将手柄的 模式开关 移动到 2.4G 位置。 3. 按下 start 键 开启手柄，连接完成后 状态指示灯 常亮。 wireless connection 1– connect the 2.4G adapter to the controller port of your NEOGEO mini console 2– turn the mode switch to 2.4G 3– press the start button to turn on the controller, the status LED becomes solid when the connection is successful 有线连接 1. 将手柄连接到 NEOGEO mini 主机的手柄端口，等待系统识别完成后即可使用。 wired connection 1– connect the controller to the controller port of the NEOGEO mini via the USB cable 2– wait till the controller is successfully recognized by your NEOGEO mini to play Windows * 要求 Windows 设备系统版本为 Windows 10（1903）或更高版本。 Windows · required system: Windows 10 (1903) or above 无线连接 1. 将配备的 2.4G 接收器连接到 Windows 设备的 USB 端口。 2. 将手柄的 模式开关 移动到 2.4G 位置。 3. 按下 start 键 开启手柄，连接完成后 状态指示灯 常亮。 有线连接 1. 将手柄连接到 Windows 设备的 USB 端口，等待系统识别完成后即可使用。 wireless connection 1– connect the 2.4G adapter to the USB port of your Windows device 2– turn the mode switch to 2.4G 3– press the start button to turn on the controller, the status LED becomes solid when the connection is successful wired connection 1– connect the controller to the USB port of the Windows device via the USB cable 2– wait till the controller is successfully recognized by your Windows to play Android * 要求 Android 设备系统版本为 Android 9.0 或更高版本。 Android · required system: Android 9.0 or above 蓝牙连接 1. 将手柄的 模式开关 移动到 蓝牙 位置。 2. 按下 配对键 至 状态指示灯 左右滚动闪烁，进入配对状态。（仅首次连接时需要配对） 3. 打开 Android 设备 “蓝牙”，搜索 8BitDo NEOGEO GP 手柄连接，连接完成后 状态指示灯 常亮。 Bluetooth connection 1– turn the mode switch to Bluetooth 2– press the pair button to enter its pairing mode, the status LED starts to rotate from left to right. (this is required for the very first time only) 3– go to your Android device’s Bluetooth setting, pair with [ 8BitDo NEOGEO GP ], the status LED becomes solid when the connection is successful 切换方向键 * 按住 select + 方向键 5 秒可切换方向键功能，切换时 电源指示灯 会短暂闪烁 1 次。 * select + 方向上 = 方向键 * select + 方向左 = 左摇杆 * select + 方向右 = 右摇杆 * 方向键功能切换后会保存。 * 连接 NEOGEO mini 主机时不支持。 D-Pad Switch · press the button combos below for 5 seconds to switch the D-Pad, the Power LED will blink once when switching · select + up = D-Pad · select + left = Left Stick · select + right = Right Stick · it will be saved automatically after switching · this function is not available when connected to NEOGEO mini 配对接收器 Re-pairing with the adapter * 若连接丢失或需要重新配对接收器，可按以下步骤重新将手柄与接收器配对。 1. 将配备的 2.4G 接收器连接到 NEOGEO mini 主机或 Windows 设备。 2. 将手柄的 模式开关 移动到 2.4G 位置。 3. 按下 start 键 开启手柄。 4. 按下 配对键 至 状态指示灯 左右滚动闪烁，进入配对状态。 5. 将手柄靠近接收器，连接完成后手柄和接收器 状态指示灯 常亮。 * 每个接收器只能配对一个手柄。 · please follow the steps below to re-pair the controller with the adapter 1– connect the 2.4G adapter to the NEOGEO mini or Windows device 2– turn the mode switch to 2.4G 3– press start button to turn on the controller 4– hold the pair button to enter its pairing mode, the status LED starts to rotate from left to right 5– put the controller close to the 2.4G adapter, the status LED becomes solid when the connection is successful · each receiver can only be paired with one controller Battery · 56 hours of play time via Bluetooth and 33 hours via wireless 2.4G with a 300mAh built-in battery pack, rechargeable with 1 hour charging time · controller will turn off in 1 minute with no connection or 15 minutes of inactivity when connected with Bluetooth or 2.4G · controller stays on with wired connection Support · please visit support.8bitdo.com for further information & additional support status – low battery mode low battery mode battery charged LED indicator – red LED blinks red LED stays solid red LED turns off 电源 技术支持 * 请访问 support.8bitdo.cn 了解详细信息。 * 配备 300mAh 可充电式锂聚合物电池，无线连接可持续使用约 33 小时，蓝牙连接可持续使用约 56 小时，充电时间约 1 小时。 * 开机后 1 分钟内无连接，或连接后 15 分钟内无操作会自动关机。 * 使用有线连接时不会自动关机。 电源状态 电量不足 正在充电 充电完成 电源指示灯状态 红灯闪烁 红灯常亮 红灯熄灭 2.4G Adapter FCCregulatoryconformance： ThisdevicecomplieswithPart15 of theFCCRules.Operationis subjectto thefollowingtwo conditions: (1)Thisdevicemaynotcauseharmfulinterference. (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycause undesiredoperation. NOTE:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassB digitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto providereasonableprotectionagainstharmfulinterferencein a residentialinstallation. Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,if not installedandusedin accordancewiththeinstructions,maycauseharmfulinterferenceto radiocommunications.However,thereis noguaranteethatinterferencewillnotoccurin a particularinstallation.If thisequipmentdoescauseharmfulinterferencetoradioor televisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,the userisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowing measures: - Reorientorrelocatethereceivingantenna. - Increasetheseparationbetweentheequipmentandreceiver. -Connecttheequipmentintoanoutletona circuitdifferentfromthatto whichthereceiver is connected. -Consultthedealeroranexperiencedradio/TVtechnicianforhelp NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

July21,2023 DeclarationOfIdentity ToWhomItMayConcern: WithregareapplicationforModel:80HC,Accordingtothedesigner,SHENZHEN8BITDOTECHCO., LTD.,weherebydeclarethedifferencebetweenModel:80HCandModel: 80HC01,80HC02,80HC03,80HC04,80HC05,80HC06,80HC07,80HC08as; BasicModelNumber:80HC BasicBrandName:8BITDO BasicProductName:8BitDoNEOGEOWirelessController BasicCertificateNumber: ☐New/☒AdditionalModelNumber(s): 80HC01,80HC02,80HC03,80HC04,80HC05,80HC06,80HC07,80HC08 DeclaretheCircuit,PCBLayout,ElectricalParts,andappearanceofthefollowingproduct(s)are identicaltothebasicmodel: Exceptthefollowing(s): Themodelchangedfordifferentmarketandcustomer,theothersarethesame. YoursSincerely, SHENZHEN8BITDOTECHCO.,LTD. ChargePersonPrintedName:Weichao ChargePersonTitle:PM

C5266091_X8_Ed.1 1/1 Letter of Authorization SHENZHEN 8BITDO TECH CO., LTD. Company: SHENZHEN 8BITDO TECH CO., LTD. Address: Room 210, Building 1, Nanhai Ecool, No.6 Xinghua Road, Shekou, Nanshan District, Shenzhen, China Product Name: 8BitDo NEOGEO Wireless Controller Model Number: 80HC, 80HC01, 80HC02, 80HC03, 80HC04, 80HC05, 80HC06, 80HC07, 80HC08 FCC Identifier: 2AOWF-NG30 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Wei Chao Date: 27th July, 2023 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 < SHENZHEN 8BITDO TECH CO., LTD. > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 27th July, 2023 Subject: Request for Confidentiality FCC ID: 2AOWF-NG30 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☒ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180_____ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name:Wei Chao Title:Manager

ReportNo.:BL-SZ2360460-AW 1 / 4 EUTEXTERNALPHOTOS FRONTVIEWOFEUT REARVIEWOFEUT ReportNo.:BL-SZ2360460-AW 2 / 4 LEFTVIEWOFEUT RIGHTVIEWOFEUT ReportNo.:BL-SZ2360460-AW 3 / 4 TOPVIEWOFEUT BOTTOMVIEWOFEUT ReportNo.:BL-SZ2360460-AW 4 / 4 Accessory-Type-CCable --BLANKBELOW--

Label: Labellocation:

Report No.: BL-SZ2360460-AI 1 / 3 EUT INTERNAL PHOTOS EUT UNCOVER VIEW 1 EUT UNCOVER VIEW 2 Report No.: BL-SZ2360460-AI 2 / 3 MAIN BOARD TOP VIEW MAIN BOARD REAR VIEW PCB Antenna RF Chip Report No.: BL-SZ2360460-AI 3 / 3 BATTERY (FRONT) BATTERY (REAR) --BLANK BELOW--

Report No.: BL-SZ2360460-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: SHENZHEN 8BITDO TECH CO., LTD. Address: Room 210, Building 1, Nanhai Ecool, No.6 Xinghua Road, Shekou, Nanshan District, Shenzhen, China Equipment Type: 8BitDo NEOGEO Wireless Controller Model Name: 80HC (refer to section 2.4) Brand Name: 8BITDO FCC ID: 2AOWF-NG30 Test Standard: 47 CFR Part 2.1093 KDB 447498 D04 v01 Sample Arrival Date: Jun. 09, 2023 Test Date: Jun. 21, 2023 - Jul. 24, 2023 Date of Issue: Jul. 27, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Xiong Lining Checked by: Xu Rui Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2360460-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Content Rev. 01 Jul. 27, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 3 1.1 Test Laboratory .............................................................................................................. 3 1.2 Test Location .................................................................................................................. 3 2 PRODUCT INFORMATION ......................................................................................................... 4 2.1 Applicant Information ...................................................................................................... 4 2.2 Manufacturer Information ............................................................................................... 4 2.3 Factory Information ........................................................................................................ 4 2.4 General Description for Equipment under Test (EUT) ................................................... 4 2.5 Ancillary Equipment ........................................................................................................ 5 2.6 Technical Information ..................................................................................................... 5 3 SUMMARY OF TEST RESULT ................................................................................................... 6 3.1 Test Standards ............................................................................................................... 6 4 DEVICE CATEGORY AND LEVELS LIMITS .............................................................................. 7 5 ASSESSMENT RESULT ............................................................................................................. 9 5.1 Output Power ................................................................................................................. 9 5.2 Tune-up power ............................................................................................................... 9 5.3 RF Exposure Evaluation Result ..................................................................................... 9 5.4 Conclusion ...................................................................................................................... 9 Report No.: BL-SZ2360460-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Accreditation Certificate The laboratory is a testing organization accredited by FCC as a accredited testing laboratory. The designation number is CN1196. Report No.: BL-SZ2360460-701 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 10 Web: www.titcgroup.com Template No.: TRP-FCC-Portable-2 (2022-08-15) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant SHENZHEN 8BITDO TECH CO., LTD. Address Room 210, Building 1, Nanhai Ecool, No.6 Xinghua Road, Shekou, Nanshan District, Shenzhen, China 2.2 Manufacturer Information Manufacturer SHENZHEN ONEBITDO TECH CO., LTD. Address Room 203, Building 1, Huajian Building, Xinghua Road, Shekou, Shuiwan Community, Zhaoshang Street, Nanshan District, Shenzhen, China 2.3 Factory Information Factory Shenzhen Zhongxingda Electronic Co., Ltd. Address 3-4/F, Bldg 10, Tongfuyu Industrial Zone, Lezhujiao Village, Xixiang, Baoan District, Shenzhen, China 2.4 General Description for Equipment under Test (EUT) EUT Name 8BitDo NEOGEO Wireless Controller Model Name Under Test 80HC Series Model Name 80HC01, 80HC02, 80HC03, 80HC04, 80HC05, 80HC06, 80HC07, 80HC08 Description of Model name differentiation All models are same with electrical parameters and internal circuit structure, but only differ in model name. (this information provided by the customer) Hardwa…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2340694-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 12 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: SHENZHEN 8BITDO TECH CO., LTD. Address: Room 210, Building 1, Nanhai Ecool, No.6 Xinghua Road, Shekou, Nanshan District, Shenzhen, China Equipment Type: 2.4G antenna Model Name: 81HC Brand Name: 8BITDO Test Standard: IEEE Std 149-2021 Sample Arrival Date: Apr. 21, 2023 Test Date: Apr. 23, 2023 Date of Issue: Apr. 25, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Zou Liu Approved by: Tolan Tu (Testing Director) _______________ _______________ _______________ Report No.: BL-SZ2340694-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 12 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Apr. 25, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory ................................................................................................................... 3 1.2 Test Location ....................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information ........................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................. 4 2.5 Technical Information .......................................................................................................... 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards .................................................................................................................... 5 3.2 Test Verdict ......................................................................................................................... 5 3.3 Test Uncertainty .................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition ..................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................. 6 4.3 Test Setup ........................................................................................................................... 7 ANNEX A TEST RESULTS ........................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 A.2 VSWR ................................................................................................................................. 8 ANNEX B RADIATION PATTERN ................................................................................................ 9 ANNEX C TEST SETUP PHOTOS ............................................................................................. 11 ANNEX D EUT PHOTO .............................................................................................................. 11 Report No.: BL-SZ2340694-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 12 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Report No.: BL-SZ2340694-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 12 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant SHENZHEN 8BITDO TECH CO., LTD. Address Room 210, Building 1, Nanhai Ecool, No.6 Xinghua Road, Shekou, Nanshan District, Shenzhen, China 2.2 Manufacturer Information Manufacturer SHENZHEN ONEBITDO TECH CO., LTD. Address Room 203, Building 1, Huajian Building, Xinghua Road, Shekou, Shuiwan Community, Zhaoshang Street, Nanshan District, Shenzhen, China 2.3 General Description for Equipment under Test (EUT) EUT Name 2.4G antenna Model Name Under Test 81HC Antenna Type PCB Antenna Dimensi…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2360460-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 51 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: SHENZHEN 8BITDO TECH CO., LTD. Address: Room 210, Building 1, Nanhai Ecool, No.6 Xinghua Road, Shekou, Nanshan District, Shenzhen, China Equipment Type: 8BitDo NEOGEO Wireless Controller Model Name: 80HC (refer to section 2.4) Brand Name: 8BITDO FCC ID: 2AOWF-NG30 Test Standard: 47 CFR Part 15 Subpart C (refer to section 3.1) Sample Arrival Date: Jun. 09, 2023 Test Date: Jun. 21, 2023 - Jul. 18, 2023 Date of Issue: Jul. 27, 2023 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Julie Zhu Checked by: Ye Hongji Approved by: Liao Jianming (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ2360460-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 51 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Jul. 27, 2023 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ......................................................................................................... 4 1.1 Test Laboratory .............................................................................................................. 4 1.2 Test Location .................................................................................................................. 4 2 PRODUCT INFORMATION ......................................................................................................... 5 2.1 Applicant Information ...................................................................................................... 5 2.2 Manufacturer Information ............................................................................................... 5 2.3 Factory Information ........................................................................................................ 5 2.4 General Description for Equipment under Test (EUT) ................................................... 5 2.5 Technical Information ..................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................. 7 3.1 Test Standards ............................................................................................................... 7 3.2 Test Verdict .................................................................................................................... 7 4 GENERAL TEST CONFIGURATIONS ........................................................................................ 8 4.1 Test Environments ......................................................................................................... 8 4.2 Test Equipment List ........................................................................................................ 8 4.3 Test Software List ........................................................................................................... 8 4.4 Measurement Uncertainty .............................................................................................. 9 4.5 Description of Test Setup ............................................................................................... 9 4.6 Measurement Results Explanation Example ................................................................ 12 5 TEST ITEMS .............................................................................................................................. 13 5.1 Antenna Requirements ................................................................................................. 13 5.2 Output Power ............................................................................................................... 14 5.3 Occupied Bandwidth .................................................................................................... 16 5.4 Conducted Spurious Emission ..................................................................................... 17 Report No.: BL-SZ2360460-601 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 51 Web: www.titcgroup.com Template No.: TRP-FCC Part 15.247 (2022-01-12) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 5.5 Band Edge (Authorized-band band-edge) .................................................................... 19 5.6 Conducted Emission .................................................................................................... 21 5.7 Radiated Spurious Emission ........................................................................................ 22 5.8 Band Edge (Restricted-band band-edge) ..................................................................... 27 5.9 Power Spectral density (PSD) ...................................................................................... 28 ANNEX A TEST RESULT ............................................................................................................. 29 A.1 Output Power, Duty Cycle ............................................................................................ 29 A.2 Occupied Bandwidth .................................................................................................... 31 A.3 Conducted Spurious Emissions ................................................................................... 33 A.4 Band Edge (Authorized-band band-edge) .................................................................... 36 A.5 Conducted Emissions ............................................................…

Text truncated - open the document above for the full version.

Report No.: BL-SZ2340694-AO 1 / 2 TEST SETUP PHOTOS Report No.: BL-SZ2340694-AO 2 / 2 --BLANK BELOW--

Report No.: BL-SZ2360460-AR 1 / 5 TEST SETUP PHOTOS 1 Radiated Test Photo Below 30MHz 30MHz-1GHz Report No.: BL-SZ2360460-AR 2 / 5 Close-up Above 1GHz Report No.: BL-SZ2360460-AR 3 / 5 Close-up 2 Conducted Test Photo Conducted Test-BLE Report No.: BL-SZ2360460-AR 4 / 5 Conducted Test-2.4G 3 Conducted Emissions Test Photo 1 Report No.: BL-SZ2360460-AR 5 / 5 Test Photo 2 --BLANK BELOW--