
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) L' appareil ne doit pas produire de brouillage; (2) L' appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d' en compromettre le fonctionnement. Radio Frequency Exposure Statement for IC The device has been evaluated to meet general RF exposure requirements. The device can be used in mobile exposure conditions. The min separation distance is 10cm. Déclaration d'exposition aux radiofréquences pour IC L'appareil a été évalué pour répondre aux exigences générales en matière d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition mobiles. La distance de séparation minimale est de 10 cm.
Gift Republic 4 Lyon Road London I SW19 2RL, UK [May 9, 2020] Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Gift Republic FCC ID: 2AP24-GR480024 To Whom It May Concern: We, Gift Republic hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number (2AP24-GR480024) under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement is (2020-05-09). The Limited Agency Agreement expires until further notice, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, [Signature] [Jo Tombi] [General Manager]
Gift Republic 4 Lyon Road London I SW19 2RL, UK Declaration Letter Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 May 9, 2020 FCC ID: 2AP24-GR480024 Pursuant to KDB 680106 of the Commission’s Rules, NINGBO GECEN PROMOTION & GIFT CO.,LTD.hereby declare our product which is an inductive wireless power transfer applications that meet all of the following requirements are not required to submit a KDB inquiry for devices approved usinga PAG for equipment approved using certification to address RF exposure compliance. 1) Power transfer frequency is 0.116-0.174MHz which is less than1 MHz 2) Output power from each primary coil is 5W which is less than 15 watts 3) The transfer system includes only single primary coils. 4) Client device is placed directly in contact with the transmitter 5) The EUT is a mobile device. 6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be more than 50% of the MPE limit. Yours sincerely, Gift Republic Contact person: Jo Tombi Title: General Manager
External Photos TOP VIEW OF EUT BOTTOM VIEW OF EUT FRONT VIEW OF EUT BACK VIEW OF EUT LEFT VIEW OF EUT RIGHT VIEW OF EUT
FCC ID Label Location 40mm*40mm FCC ID: 2AP24-GR480024 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Internal Photos OPEN VIEW OF EUT INTERNAL VIEW OF EUT-1 INTERNAL VIEW OF EUT-2 INTERNAL VIEW OF EUT-3 Antenna INTERNAL VIEW OF EUT-4 INTERNAL VIEW OF EUT-5
Page 1 of 14 RF Exposure Report Report No.: AGC04067200306FH03 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Fluffy Wireless Charger BRAND NAME : N/A MODEL NAME : GR480024 APPLICANT : Gift Republic DATE OF ISSUE : Apr. 29, 2020 STANDARD(S) : KDB680106 D01 RF Exposure Wireless Charging Base App v03 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC04067200306FH03 Page 2 of 14 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 29, 2020 Valid Initial Release Report No.: AGC04067200306FH03 Page 3 of 14 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................................................. 5 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 5 3. DESCRIPTION OF TEST MODES ................................................................................................................... 6 4. SYSTEM TEST CONFIGURATION .................................................................................................................. 6 5. TEST FACILITY ................................................................................................................................................ 7 6. RADIO FREQUENCY (RF) EXPOSURE TEST ............................................................................................... 8 6.1. LIMITS ........................................................................................................................................................ 8 6.2. TEST SETUP.............................................................................................................................................. 8 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .......................................................................................... 11 Report No.: AGC04067200306FH03 Page 4 of 14 1. VERIFICATION OF CONFORMITY Applicant Gift Republic Address 4 Lyon Road London I SW19 2RL, UK Manufacturer MSC Production Ltd Address RM1905, 19/F, Nan Fung Centre, 264-298 Castle Peak Road, Tsuen Wan, NT, Hong kong Factory MSC Production Ltd Address RM1905, 19/F, Nan Fung Centre, 264-298 Castle Peak Road, Tsuen Wan, NT, Hong kong Product Designation Fluffy Wireless Charger Brand Name N/A Test Model: GR480024 Date of test Mar. 30, 2020 to Apr. 24, 2020 Deviation No any deviation from the test method Condition of Test Sample Normal Report Template AGCRT-US-BR/RF We hereby certify that: The above equipment was tested by Attestation of Global Compliance(Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in KDB680106 D01. The results of testing in this report apply to the product/system which was tested only. Prepared By John Zeng Project Engineer Apr. 24, 2020 Reviewed By Max Zhang Reviewer Apr. 29, 2020 Approved By Forrest Lei Authorized Officer Apr. 29, 2020 Report No.: AGC04067200306FH03 Page 5 of 14 2. GENERAL INFORMATION 2.1.PRODUCT DESCRIPTION A major technical description of EUT is described as following Operation Frequency 116-174kHz Test Frequency 126.4kHz Maximum field strength 53.71dBuV/m(PK)@3m Number of channels 1 Antenna Designation Coil Antenna (Met 15.203 Antenna requirement) Hardware Version 1.0 Software Version 1.0 Power Supply DC 5V by adapter Note: The EUT is equipped with two adapters, both have been assessed and only the worst test data of adapter recorded in this report Report No.: AGC04067200306FH03 Page 6 of 14 3. DESCRIPTION OF TEST MODES NO. TEST MODE DESCRIPTION 1 Wireless charging Mode(Full load) 2 Wireless charging Mode(Half load) 3 Wireless charging Mode(Null load) Note: 1. The mode 1 was the worst case and only the data of the worst case record in this report. 4. SYSTEM TEST CONFIGURATION Item Equipment Model No. ID or Specification Remark 1 Fluffy Wireless Charger GR480024 2AP24-GR480024 EUT 2 Adapter DYS618-19094W-1 DC 5V AE 3 Adapter KT05W050100USU DC 5V AE 4 Wireless load N/A 5W AE 5 USB Cable N/A 1.2m Unshielded Accessory Report No.: AGC04067200306FH03 Page 7 of 14 5. TEST FACILITY TEST EQUIPMENT LIST Description Manufacturer Model S/N Cal. Date Cal. Due Broadband Field Meter Narda Safety Test Solutions GmbH NBM-550 J-0004 Jun.12,2019 Jun.11,2020 Probe FHP Narda Safety Test Solutions GmbH EHP-50F J-0015 Jun.12,2019 Jun.11,2020 TestSite Attestation of Global Compliance(Shenzhen) Co., Ltd Location 1-2/F,Building19,JunfengIndustrialPark,ChongqingRoad,HepingCommunity,FuhaiSt reet,Bao'anDistrict,Shenzhen,Guangdong,China Designation Number CN1259 FCC Test Firm Registration Number 975832 A2LA Cert. No. 5054.02 Description Attestation of Global Compliance(Shenzhen) Co., Ltd is accredited by A2LA Report No.: AGC04067200306FH03 Page 8 of 14 6. RADIO FREQUENCY(RF) EXPOSURETEST 6.1. LIMITS For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. 6.2. TEST SETUP Note: Position A: Front of EUT; Position B: Left of EUT; Position C: back of EUT; Position D: Right of EUT; Po…
Text truncated - open the document above for the full version.
Page 1 of 29 FCC Test Report Report No.: AGC04067200306FE03 FCC ID : 2AP24-GR480024 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Fluffy Wireless Charger BRAND NAME : N/A MODEL NAME : GR480024 APPLICANT : Gift Republic DATE OF ISSUE : Apr. 29, 2020 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd CAUTION: This report shall not be reproduced except in full without the written permission of the test laboratory and shall not be quoted out of context. Report No.: AGC04067200306FE03 Page 2 of 29 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 29, 2020 Valid Initial Release Report No.: AGC04067200306FE03 Page 3 of 29 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................................................. 5 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 5 3. MEASUREMENT UNCERTAINTY ................................................................................................................... 6 4. DESCRIPTION OF TEST MODES ................................................................................................................... 7 5. SYSTEM TEST CONFIGURATION .................................................................................................................. 8 5.1. CONFIGURATION OF EUT SYSTEM ........................................................................................................ 8 5.2. EQUIPMENT USED IN EUT SYSTEM ....................................................................................................... 8 5.3. SUMMARY OF TEST RESULTS ................................................................................................................ 8 6. TEST FACILITY ................................................................................................................................................ 9 7. RADIATED EMISSION ................................................................................................................................... 10 7.1TEST LIMIT ................................................................................................................................................ 10 7.2. MEASUREMENT PROCEDURE ............................................................................................................. 11 7.3. TEST SETUP............................................................................................................................................ 12 7.4. TEST RESULT .......................................................................................................................................... 13 8. 20DB BANDWIDTH ........................................................................................................................................ 16 8.1. MEASUREMENT PROCEDURE ............................................................................................................. 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................... 16 8.3. MEASUREMENT RESULTS .................................................................................................................... 17 9. FCC LINE CONDUCTED EMISSION TEST .................................................................................................. 18 9.1. LIMITS OF LINE CONDUCTED EMISSION TEST .................................................................................. 18 9.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST ................................................................ 18 9.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ............................................. 19 9.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ............................................................ 19 9.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST ...................................................................... 20 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .......................................................................................... 22 APPENDIX B: PHOTOGRAPHS OF EUT ......................................................................................................... 24 Report No.: AGC04067200306FE03 Page 4 of 29 1. VERIFICATION OF CONFORMITY Applicant Gift Republic Address 4 Lyon Road London I SW19 2RL, UK Manufacturer MSC Production Ltd Address RM1905, 19/F, Nan Fung Centre, 264-298 Castle Peak Road, Tsuen Wan, NT, Hong kong Factory MSC Production Ltd Address RM1905, 19/F, Nan Fung Centre, 264-298 Castle Peak Road, Tsuen Wan, NT, Hong kong Product Designation Fluffy Wireless Charger Brand Name N/A Test Model GR480024 Date of test Mar. 30, 2020 to Apr. 24, 2020 Deviation No any deviation from the test method Condition of Test Sample Normal Test Result Pass Report Template AGCRT-US-BR/RF We hereby certify that: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10 (2013) and the energy emitted by the sample EUT tested as described in this report is in compliance with Section 15.207, 15.209, 15.203 of the FCC Part 15, Subpart C Rules. The results of testing in this report apply to the product/system which was tested only. Prepared By John Zeng Project Engineer Apr. 24, 2020 Reviewed By Max Zhang Reviewer Apr. 29, 2020 Approved By Forrest Lei Authorized Officer Apr. 29, 2020 Report No.: AGC04067200306FE03 Page 5 of 29 2. GENERAL INFORMATION 2.1. PRODUCT DE…
Text truncated - open the document above for the full version.
Test Setup Photos FCC RADIATED EMISSION TEST SETUP BELOW 1GHZ FCC LINE CONDUCTED EMISSION TEST SETUP
2F.,No.2 Building, Huafeng No.1 Technical Industri · Shenzhen · China
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 0.116 MHz - 0.174 MHz | - |