2AP7NR4-KNUCKLER4 KNUCKLE

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name FANLIGHT Co.,Ltd. Address 22, Nonhyeon‐ro 128‐gil, Gangnam‐gu, Seoul, South Korea FRN 0027627587 Grantee Code 2AP7N FCC ID: Authorized Contact NamePoszer Kim Contact Phone 82-70-4848-4304 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2025-11-14 Print Name:Poszer Kim Title: Research Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database 2AP7NR4-KNUCKLE

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name FANLIGHT Co.,Ltd. Address 22, Nonhyeon‐ro 128‐gil, Gangnam‐gu, Seoul, South Korea FRN 0027627587 Grantee Code 2AP7N FCC ID: Authorized Contact Name Poszer Kim Contact Phone 82-70-4848-4304 Contact Email [email protected] FANLIGHT Co.,Ltd. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is not inherently compliant. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 2025 Print Name: Poszer Kim Title: Research Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database 2AP7NR4-KNUCKLE Nov 14,

UNITED STATES DESIGNATED AGENT LETTER TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: FANLIGHT Co.,Ltd. Company Name: Fanlight Incorporated FRN: 0027627587 FRN: 0034852541 Grantee Code: 2AP7N Contact Name: Contact Name Lynn Bartsch Address: 22, Nonhyeon‐ro 128‐gil, Gangnam‐gu, Seoul, South Korea Address: 1050 E Flamingo Rd S107 1365 City/Province/Zip: Seoul City/Province/Zip: Las Vegas, NV 89119 Telephone: +82-70-4848-4304 Telephone: +1-415-652-6066 Fax: - Fax: - Email: Email: [email protected] Applicable Equipment: FCC ID : <2AP7NR4-KNUCKLE> ATTN: Director of Certification: We, FANLIGHT Co., Ltd. and Fanlight Incorporated understand and acknowledge the applicants consent and the designated agent ’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, FANLIGHT Co., Ltd. and Fanlight Incorporated acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed):Poszer Kim Name (Printed): Lynn Bartsch Title: Research Engineer Title: CEO & General Counsel Signature: Signature: Date: , 2025 Poszer Kim [email protected] Nov14

22, Nonhyeon-ro 128-gil, Gangnam-gu, Seoul, Republic of Korea , 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 LETTER FOR AUTHORIZATION FCC ID:2AP7NR4-KNUCKLE To whom it may concern: I, the undersigned, hereby authorize SGS Korea Co., Ltd. and hereafter referred to as SGS Korea, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by SGS Korea Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits , pursuant to Section 5301 of the Anti ‐Drug Abuse Act of 1988 , 21 U.S.C. 853( a). In authorizing SGS Korea as our agent, we still recognize that we are responsible to : a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; Nov 14 22, Nonhyeon-ro 128-gil, Gangnam-gu, Seoul, Republic of Korea i) keep a record of all complaints made known to the us relating to the product ’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours / Poszer Kim Research Engineer FANLIGHT Co., LTD. TEL: +82-70-4848-4304 E-mail: [email protected]

22, Nonhyeon-ro 128-gil, Gangnam-gu, Seoul, Republic of Korea 1Nov4 , 2025 FCC ID:2AP7NR4-KNUCKLE Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road, Columbia, MD 21046 REQUEST FOR CONFIDENTIALITY To Whom It May Concern: Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules (CFR 47 ), and Section 552 (b) (4) of the Freedom of Information Act, FANLIGHT CO., LTD., hereby requests confidentiality and treatment of certain information accompanying this application. The materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. We are also hereby request Short ‐Term Confidentiality for 180 days after the grant as outlined in Public Notice DA 04 ‐1705 . This provision will give FANLIGHT CO., LTD. temporary confidentiality of commercially sensitive information prior to product release. The requested Permanent and Temporary Confidential exhibits are listed as follows: CONFIDENTIAL LIST Permanent 1 Block Diagram 2 Operational Descriptions 3 Schematics Short‐Term 4 External Photos 5 Internal Photos 6 Test‐Setup Photos 7 User Manual The Applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentations, where applicable, will not be made public before the date of the Grant for this application. Sincerely Yours, PoszerKim/ ResearchEngineer FANLIGHTCo., LTD. TEL: +82-70-4848-4304 E-mail: [email protected]

Label InformationModel:R4 KNUCKLE Bottom of EUT FCC ID: 2AP7NR4-KNUCKLE * 15.19 requirement will be written on the manual due to its size.

FCC ID: 2AP7NR4-KNUCKLE According to KDB 447498 D04 Interim General RF Exposure Guidance v01 1. 1-mW Test Exemption Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 ㎽, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 ㎑ to 100 ㎓, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. 2. Test Result Mode Frequency Range (㎒) Maximum Average Target Power (㏈m) Maximum Tune up (㏈) Maximum Average Output Power (㏈m) Limit Result (㏈m) (㎽) (㎽) Bluetooth Low energy 2 402 ~ 2 480 -15 1.5 -13.5 0.045 1 Pass Note ; - Maximum average target power is the manufacturer’s declared rated power. - Maximum average output power = Maximum average target power (㏈m) + Maximum tune up (㏈). 3. Conclusion: No SAR is required.

Model name: R4 KNUCKLE Item Contents Antenna Type PCB Pattern Antenna Antenna peak gain 1.56 ㏈i Manufacturer / Model name FANLIGHT Co.,Ltd. / - Address of manufacturer 22 , Nonhyeon-ro 128-gil , Gangnam-gu , Seoul, South Korea, 06105 Test Laboratory KTM Technology Co., Ltd Antenna Length 2.15 cm Antenna Width 0.6 cm Antenna Information Model name: R4 KNUCKLE 2D Radiation Pattern Model name: R4 KNUCKLE

SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006314 Page: 2 of 34 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) INDEX Table of contents 1. General Information -------------------------------------------------------------------------------------- 3 2. Transmitter Radiated Spurious Emissions and Conducted Spurious Emissions --------- 8 3. 6 ㏈ Bandwidth ------------------------------------------------------------------------------------------ 25 4. Maximum Peak Conducted Output Power --------------------------------------------------------- 28 5. Power Spectral Density --------------------------------------------------------------------------------- 31 6. Antenna Requirement ----------------------------------------------------------------------------------- 34 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006314 Page: 3 of 34 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1. General Information 1.1. Testing Laboratory SGS Korea Co., Ltd. (Gunpo Laboratory) - 10-2, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 - Designation number: KR0150 All SGS services are rendered in accordance with the applicable SGS conditions of service available on request and accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx. Phone No. : +82 31 688 0901 Fax No. : +82 31 688 0921 1.2. Details of Applicant Applicant : FANLIGHT Co.,Ltd. Address : 22, Nonhyeon-ro 128-gil, Gangnam-gu, Seoul, South Korea, 06105 Contact Person : Kim, Poszer Phone No. : +82 70 4848 4304 1.3. Details of Manufacturer Company : Same as applicant Address : Same as applicant 1.4. Description of EUT Kind of Product R4 KNUCKLE Model Name R4 KNUCKLE Serial Number Conducted: C-001 Radiated: R-001 Power Supply DC 3 V Frequency Range 2 402 ㎒ ~ 2 480 ㎒ (Bluetooth Low Energy) Modulation Technique GFSK Number of Channels 40 channels (Bluetooth Low Energy) Antenna Type PCB Pattern Antenna Antenna Gain ※ 1.56 ㏈i H/W Version 1.0 S/W Version 1.0 SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006314 Page: 4 of 34 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.5. Test Equipment List Equipment Manufacturer Model S/N Cal. Due Cal. Interval Spectrum Analyzer R&S FSV30 103454 12/06/2025 Annual Signal Generator R&S SMA100B 106887 10/11/2025 Annual DC Power Supply Agilent U8002A MY54110041 09/19/2025 Annual Power Sensor R&S NRP-Z81 100669 05/24/2026 Annual Attenuator AEROFLEX / INMET 40AH2W-6 3 03/12/2026 Annual Loop Antenna Schwarzbeck Mess-Elektronik FMZB 1519 1519-039 03/25/2027 Biennial Bilog Antenna Schwarzbeck Mess-Elektronik VULB 9163 01126 03/05/2027 Biennial Horn Antenna R&S HF906 100326 02/24/2026 Annual Horn Antenna Schwarzbeck Mess-Elektronik BBHA 9170 9170-540 12/11/2025 Annual Turn Table Innco systems GmbH DS 1200 S N/A N.C.R. N/A Controller Innco systems GmbH CONTROLLER CO3000-4P CO3000/963/383 30516/L N.C.R. N/A Antenna Mast Innco systems GmbH MA4640-XP-ET MA4640/536/383 30516/L N.C.R. N/A Anechoic Chamber SY Corporation L × W × H (9.6 m × 6.4 m × 6.6 m) N/A N.C.R. N/A Coaxial Cable SENSORVIEW NMST-13A26-NMST-5 m TPC2402190004 10/08/2025 Semi- Annual Coaxial Cable SENSORVIEW NMST-13A26-NMST-10 m TPC2402190001 10/08/2025 Semi- Annual Coaxial Cable RFONE PL360P-292M292M-1.5M-A 20200324002 10/11/2025 Semi- Annual EMI Test Receiver R&S ESU26 100109 01/13/2026 Annual Spectrum Analyzer Agilent N9020A MY53421758 09/10/2025 Annual SIGNAL CONDITIONING UNIT R&S SCU18F 101058 02/27/2026 Annual Preamplifier H.P. 8447F 2944A03909 08/07/2026 Annual Preamplifier TESTEK TK-PA1840H 130016 03/13/2026 Annual High Pass Filter Wainwright Instrument GmbH WHK3.0/18G-6SS 4 06/09/2026 Annual High Pass Filter Wainwright Instrument GmbH WLKX10-6320-8000-26500- 40CC 6 10/29/2025 Annual Note; For equipment listed above that has a calibration date or calibration due date that falls within the test date range, care was taken to ensure that this equipment was used after the calibration date and before the calibration due date. SGS Korea Co., Ltd. 4, LS-ro 182beon-gil, Gunpo-si, Gyeonggi-do, Korea, 15807 Tel. +82 31 428 5700 / Fax. +82 31 427 2370 http://www.sgsgroup.kr Report Number: F690501-RF-RTL006314 Page: 5 of 34 RTT7081-02(2020.10.05)(0) A4(210 mm * 297 mm) 1.6. Declaration by the Manufacturer - The EUT supports BLE version 5.0 and only operates PHY 1M with 37 bytes. 1.7. Summary of Test Results The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15 Subpart C Section Test Item(s) Result 15.205(a) 15.209 15.247(d) Transmitter Radiated Spurious Emissions and Conducted Spurious Emission Pass 15.247(a)(2) 6 ㏈ Bandwidth Pass 15.247(b)(3) Maximum Peak Conducted Output Power Pass 15.247(e) Power Spectral Density Pass 15.207 AC Power Line Conducted Emission N/A 1) Note; 1) The AC power line test was not performed because the EUT use battery power for operation and which do not operate from the AC power lines. 1.8. Test Procedure(s) The measurement procedures described in the American National Standard of Procedure for Compliance Testing of unlicensed Wireless Devices (ANSI C63.10-2013) and the guidance provided in KDB 558074 D01 15.247 Meas Guidance v05r02 were used in the measurement of the DUT. 1.9. Sample Calculation Where relevant, the following sample calculation is provided: 1.9.1. Conducted Test Offset value (㏈) = Attenuator (㏈) + Cable loss (㏈) 1.9.2. Radiation Test Field strength level (㏈㎶/m) = Measured level (㏈㎶) + Antenna factor (㏈/m) + Cable loss (㏈) - Amplifier gain (㏈) + Duty factor (㏈) 1.10. Information of software for test - Using the software of Non_Signaling_TEST_v1.9 …

Text truncated - open the document above for the full version.