2AP7W-901836WIRELESS CHARGER

ATTENTION EN: Read all the instructions before using the product. ES: Lea todas las instrucciones antes de usar el producto. FR: Lire toutes les instructions avant d’utiliser le produit. 123456 25W MAGNETIC WIRELESS CHARGER CARGADOR INALÁMBRICO MAGNÉTICO DE 25W CHARGEUR SANS FIL MAGNÉTIQUE 25W USER MANUAL EN: • Use this product only with compatible electronic devices. • For best performance, follow the instructions in this user manual. • Do not use the charger in extreme temperatures or near open flames. • Keep the charger away from water and liquids. • Do not place metal objects between the charger and your device during wireless charging. • Do not use with devices that are not compatible with this charger. • Unplug the charger when not in use. • Clean only with a soft, dry cloth. Do not use corrosive cleaners. • The charger may become warm during normal use. • Do not attempt to repair the charger. If damaged or not working, contact the retailer, distributor, or customer support. Dispose of the product according to local regulations. ES: • Use este producto únicamente con dispositivos electrónicos compatibles. • Para obtener el mejor rendimiento, siga las instrucciones de este manual de usuario. • No use el cargador en temperaturas extremas ni cerca de llamas abiertas. • Mantenga el cargador alejado del agua y otros líquidos. • No coloque objetos metálicos entre el cargador y su dispositivo durante la carga inalámbrica. • No use el cargador con dispositivos que no sean compatibles. • Desconecte el cargador cuando no esté en uso. • Limpie únicamente con un paño suave y seco. No use limpiadores corrosivos. • El cargador puede calentarse durante el uso normal. • No intente reparar el cargador. Si está dañado o no funciona correctamente, comuníquese con el distribuidor, vendedor o servicio de atención al cliente. Deseche el producto según las normas locales. FR: • Utilisez ce produit uniquement avec des appareils électroniques compatibles. • Pour une performance optimale, suivez les instructions de ce manuel d’utilisation. • N’utilisez pas le chargeur dans des températures extrêmes ou à proximité d’une flamme nue. • Gardez le chargeur à l’écart de l’eau et de tout liquide. • Ne placez pas d’objets métalliques entre le chargeur et votre appareil pendant la recharge sans fil. • N’utilisez pas le chargeur avec des appareils non compatibles. • Débranchez le chargeur lorsqu’il n’est pas utilisé. • Nettoyez uniquement avec un chiffon doux et sec. N’utilisez pas de nettoyants corrosifs. • Le chargeur peut devenir chaud pendant une utilisation normale. • N’essayez pas de réparer le chargeur. En cas de dommage ou de mauvais fonctionnement, contactez le détaillant, le distributeur ou le service à la clientèle. Éliminez le produit conformément aux réglementations locales. Your Life Connected FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must withstand any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment to an outlet on a circuit different from the connected receiver. 4. Consult the dealer or an experienced radio / TV technician for help. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC RF Exposure Statement This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Statement: CAN ICES-003 (b) / NMB -003 (B) This device contains license-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Can- ada’s license-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. RF Warning Statement This equipment complies with IC Radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 10cm between the radiator & your body. FR: L’émetteur / récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1. L’appareil ne doit pas produire de brouillage. 2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. Avertissement RF: Cet appareil est conforme à IC l’exposition aux rayonnements limites fixées pour un environnement non contrôlé. Cet appareil doit être installé et utilisé avec une distance minimale de 10 cm entre le radiateur et votre corps. Cet transmetteur ne doit pas être co-situé ou opérant en liaiso…

Text truncated - open the document above for the full version.

VisionTek Products, LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-09-01 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AP7W-901836 VisionTek Products, LLC certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. VisionTek Products, LLC certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Signed: Printed name: Ryan Darbro Title: Director of Products and CX Company Name: VisionTek Products, LLC Date:9/1/2026 VisionTek Products, LLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-09-01 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AP7W-901836 VisionTek Products, LLC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signed: Printed name: Ryan Darbro Title: Director of Products and CX Company Name: VisionTek Products, LLC Date:9/1/2026

VisionTek Products, LLC * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter 8/27/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: 2AP7W-901836 FRN of applicant: 0027631225 Per section 2.911(d)(7) of the FCC rules, VisionTek Products, LLC (“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: VisionTek Products, LLC FCC Registration Number (FRN): 0027631225 Physical U.S. Company Address: 3 W College Drive Unit A, Arlington Heights, IL 60004 United States Contact Person: Ryan Darbro Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different from Applicant): Signed: Signed: Printed name: Ryan Darbro Printed name: Ryan Darbro Title: Director of Products and CX Title: Director of Products and CX Company Name: VisionTek Products, LLC Company Name: VisionTek Products, LLC Date: 8/27/2026 Date: 8/27/2026

VisionTek Products, LLC Date：8/31/2026 Product Model Number: 901836 FCC ID: 2AP7W-901836 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Printed name: Ryan Darbro Title: Director of Products and CX Email: [email protected] Telephone: 708-476-8233 On behalf of: VisionTek Products, LLC

VisionTek Products, LLC Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: September 1, 2026 Subject; Request for Confidentiality FCC ID: 2AP7W-901836 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Ryan Darbro Title: Director of Products and CX

External Photos M/N: 901836 External Photos M/N: 901836 External Photos M/N: 901836

1000±40 8.60±0.20 6.65±0.05 39.95±0.10 Ø59.85±0.10 .92mm .77mm 5.138mm 6.7mm

Internal Photos M/N: 901836 Coil Antenna Internal Photos M/N: 901836 Internal Photos M/N: 901836

Page 1 of 6 Report No. ESTE-R2607275 FCC 47 CFR MPE REPORT VisionTek Products, LLC WIRELESS CHARGER Model Number: 901836 FCC ID: 2AP7W-901836 Applicant: VisionTek Products, LLC Address: 3 W College Drive Unit A, Arlington Heights, IL 60004 United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2607275 Date of Test: Jun. 29, 2026 to Jul. 14, 2026 Date of Report: Jul. 20, 2026 Page 3 of 6 Report No. ESTE-R2607275 1. Summary of test 1.1. Summary of test result No. Description of Test Item FCC Standard Section Results 1 Maximum Permissible Exposure Part 1.1307(b)&1.1310 PASS 1.2. Test Mode 1.3. Test Equipment List Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Electric and Magnetic Field Probe-Analyzer Narda S.T.S./PMM EHP-200A EST-E106 June 11,26 June 10,27 Test Software Narda EHP200-TS Rel 1.92 N/A N/A Note: Test uncertainty: ±1.62 dB (H-field);±1.64 dB (E-field) at a level of confidence of 95%. 1.4. Assistant equipment used for test Item Equipment Brand Model Name/Type No. FCC ID Series No. 1 Adapter - SG-0501000AS - - 2 Wireless load - YBZ V.3.1 - - Note: Don't configuration adapter when it sales on the market, The adapter provided by the laboratory. Item Shielded Type Ferrite Core Length Model Name/Type No. Note 1 NO NO 1.0m - USB Cable Test Item Test Mode Maximum Permissible Exposure Wireless Charging with 5W Wireless Charging with 7.5W Wireless Charging with 10W Wireless Charging with 15W Wireless Charging with 25W Standby Note: All modes have been tested. The report only reflects the worst case of full load test data. Page 4 of 6 Report No. ESTE-R2607275 2. Maximum Permissible Exposure 2.1. Limit Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 Note:f = frequency in MHz * = Plane-wave equivalent power density. 2.2. Test Setup Page 5 of 6 Report No. ESTE-R2607275 2.3. Test Procedure a. The test was performed on 360 degree turn table in anechoic chamber. b. The probe was placed at 20 cm surrounding, for test setup. c. The highest emission level was recorded and compared with limit as soon as measurement of each point; A, B, C, D, E were completed. 2.4. Test Result for Test setup: E-field strength Frequency range 110.5~205kHz 360kHz Test Mode Idle 5W 7.5W 10W 15W 25W Position A(V/m) 0.345 2.095 2.079 2.315 3.457 3.341 Position B(V/m) 0.366 1.954 1.642 1.726 3.359 3.458 Position C(V/m) 0.382 1.438 1.468 1.679 3.028 3.368 Position D(V/m) 0.359 1.794 1.869 1.741 3.257 3.198 Position E(V/m) 0.385 2.412 2.457 2.665 4.015 4.184 Limits (V/m) 614 H-field strength Frequency range 110.5~205kHz 360kHz Test Mode Idle 5W 7.5W 10W 15W 25W Position A(A/m) 0.038 0.044 0.045 0.048 0.079 0.089 Position B(A/m) 0.041 0.039 0.048 0.045 0.074 0.095 Position C(A/m) 0.043 0.038 0.044 0.050 0.075 0.091 Position D(A/m) 0.044 0.046 0.046 0.047 0.066 0.087 Position E(A/m) 0.045 0.052 0.051 0.052 0.085 0.112 Limits (A/m) 1.630 Page 6 of 6 Report No. ESTE-R2607275 3. Test photo Position E End of Test Report

Page 1 of 42 Report No. ESTE-R2607274 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of VisionTek Products, LLC WIRELESS CHARGER Model Number: 901836 FCC ID: 2AP7W-901836 Applicant: VisionTek Products, LLC Address: 3 W College Drive Unit A, Arlington Heights, IL 60004 United States Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2607274 Date of Test: Jun. 29, 2026 to Jul. 14, 2026 Date of Report: Jul. 20, 2026 Page 2 of 42 Report No. ESTE-R2607274 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION .......................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................ 4 1.1. Description of Device (EUT) ......................................................................................................... 4 2. SUMMARY OF TEST ........................................................................................................................ 5 2.1. Summary of test result .................................................................................................................. 5 2.2. Test Facilities .................................................................................................................................. 6 2.3. Measurement uncertainty ............................................................................................................. 7 2.4. Assistant equipment used for test ............................................................................................... 7 2.5. Block Diagram ................................................................................................................................ 7 2.6. The test mode was selected for the final test as listed below. ................................................ 8 2.7. Test Equipment List ....................................................................................................................... 9 3. RADIATED EMISSION ................................................................................................................... 10 3.1. Limit ................................................................................................................................................ 10 3.2. Test Setup ..................................................................................................................................... 11 3.3. Spectrum Analyzer Setting ......................................................................................................... 11 3.4. Test Procedure ............................................................................................................................. 12 3.5. Test Result .................................................................................................................................... 13 4. 20DB OCCUPIED BANDWIDTH .................................................................................................... 25 4.1. Limit ................................................................................................................................................ 25 4.2. Test Setup ..................................................................................................................................... 25 4.3. Spectrum Analyzer Setting ......................................................................................................... 25 4.4. Test Procedure ............................................................................................................................. 25 4.5. Test Condition .............................................................................................................................. 25 4.6. Test Result .................................................................................................................................... 26 5. AC POWER LINE CONDUCTED EMISSIONS ................................................................................. 29 5.1. Limit ................................................................................................................................................ 29 5.2. Test Setup ..................................................................................................................................... 29 5.3. Spectrum Analyzer Setting ......................................................................................................... 29 5.4. Test Procedure ............................................................................................................................. 29 5.5. Test Result .................................................................................................................................... 30 6. ANTENNA REQUIREMENTS .......................................................................................................... 34 6.1. Limit ................................................................................................................................................ 34 6.2. Test Result .................................................................................................................................... 34 7. TEST SETUP PHOTO .............................................................................................................. 35 8. EUT PHOTO .............................................................................................................................. 37 Page 4 of 42 Report No. ESTE-R2607274 1. GENERAL INFORMATION 1.1. Description of Device (EUT) Product Name : WIRELESS CHARGER Model Number : 901836 Software Version : N/A Hardware Version : N/A Operation Frequency : 5W/7.5W/10W: 110.5kHz-205kHz 15W/25W: 360kHz Max Wireless Charge Power : 25W Max Max Field Strength of Fundamen…

Text truncated - open the document above for the full version.

Conducted Test Radiated Test (9kHz-30 MHz) Radiated Test (30MHz-1GHz) Exposure Test Position E