2APBOAN625Precision Cooker

User Manual PRECISION ® COOKER PRO 3.0 Weasel User manual - Master v2.indd 1Weasel User manual - Master v2.indd 122/05/2026 2:37:29 PM22/05/2026 2:37:29 PM 2 CONTENTS WARNING AND SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 SETTING UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 GET CONNECTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 USING THE DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 FCC/IC COMPLIANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Weasel User manual - Master v2.indd 2Weasel User manual - Master v2.indd 222/05/2026 2:37:29 PM22/05/2026 2:37:29 PM 3 Weasel User manual - Master v2.indd 3Weasel User manual - Master v2.indd 322/05/2026 2:37:29 PM22/05/2026 2:37:29 PM 4 WARNING AND SAFETY INFORMATION TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY: ⊲ Household Use Only ⊲ CAUTION: DO NOT IMMERSE BEYOND MAX POINT ⊲ Do not use with a damaged cord or plug . ⊲ If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, do not attempt to use it again . Contact Anova Support for assistance . ⊲ Do not use outdoors . ⊲ Unplug the electrical cord when not in use and before servicing . ⊲ Do not allow to be used as a toy . Close attention is necessary when used by or near children . ⊲ Use only as described in this manual . Use only manufacturer’s recommended attachments . ⊲ Do not pull or carry by cord or use cord as a handle . ⊲ Do not use extension cords or outlets with inadequate current-carrying capacity . ⊲ Do not unplug by pulling on the cord . To unplug, grasp the plug . ⊲ Do not handle the plug or appliance with wet hands . ⊲ Do not put any object into openings . Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce water flow . ⊲ Do not use the appliance in flammable or combustible liquids such as gasoline, or use in areas where they may be present . ⊲ Store your appliance indoors in a cool, dry area . ⊲ Do not use a voltage converter or adapter, or plug the device into an outlet with unmatched voltage . Weasel User manual - Master v2.indd 4Weasel User manual - Master v2.indd 422/05/2026 2:37:29 PM22/05/2026 2:37:29 PM 5 ALWAYS EXERCISE BASIC SAFETY PRECAUTIONS WHEN OPERATING ELECTRICAL APPLIANCES, INCLUDING THE FOLLOWING: ⊲ Read all instructions, including the instructions you are reading now . ⊲ Do not touch hot surfaces . ⊲ To protect against electrical shock, do not immerse cord, plugs, or the device’s electrical components in water or other liquid . ⊲ Close supervision is necessary when the appliance is used by or near children . ⊲ Unplug from outlet when not in use and before cleaning . Allow the device to cool before assembling or disassembling . ⊲ Do not operate any appliance with a damaged cord or plug . Do not operate the appliance if it has malfunctioned or been damaged in any manner . Contact Anova Support for assistance . ⊲ The use of accessory attachments not recommended by the manufacturer may cause injuries . ⊲ Do not let the cord hang over the edge of a table or counter . Do not let the cord come in contact with hot surfaces . ⊲ Do not place the device on or near a hot gas or electric burner, or in a heated oven . ⊲ Use extreme caution when moving an appliance containing hot liquids . ⊲ Do not unplug while the device is running . ⊲ Do not use the appliance for anything other than its intended use . ⊲ Do not open the bottom enclosure while the device is plugged in or operating — it contains heating elements and moving parts . ⊲ Do not use directly on a granite or marble surface . Always place an insulating surface between the hot pot and granite or marble . SERVICE Contact Anova customer service: support@anovaculinary .com https://support .anovaculinary .com Weasel User manual - Master v2.indd 5Weasel User manual - Master v2.indd 522/05/2026 2:37:29 PM22/05/2026 2:37:29 PM 6 RENSEIGNEMENTS SUR LA SÉCURITÉ ET MISES EN GARDE POUR RÉDUIRE LE RISQUE D’INCENDIE, DE CHOC ÉLECTRIQUE OU DE BLESSURE : ⊲ Réservé à un usage domestique uniquement ⊲ ATTENTION : NE PAS IMMERGER AU-DELÀ DU POINT MAX ⊲ Ne pas utiliser avec un cordon ou une fiche endommagée . ⊲ Si l’appareil ne fonctionne pas correctement, a été échappé, endommagé, laissé à l’extérieur ou tombé dans l’eau, ne tentez pas de l’utiliser à nouveau . Contactez le soutien Anova pour obtenir de l’aide . ⊲ Ne pas utiliser à l’extérieur . ⊲ Débrancher le cordon électrique lorsqu’il n’est pas utilisé et avant l’entretien . ⊲ Ne pas laisser utiliser comme jouet . Une surveillance étroite est nécessaire lorsqu’il est utilisé par des enfants ou près d’eux . ⊲ Utiliser uniquement tel que décrit dans ce manuel . Utiliser uniquement les accessoires recommandés par le fabricant . ⊲ Ne pas tirer ni transporter par le cordon ni utiliser le cordon comme poignée . ⊲ Ne pas utiliser de rallonges électriques ni de prises avec une capacité de courant inadéquate . ⊲ Ne pas débrancher en tirant sur le cordon . Pour débrancher, saisir la fiche . ⊲ Ne pas manipuler la fiche ou l’appareil avec les mains mouillées . ⊲ Ne pas introduire d’objets dans les ouver…

Text truncated - open the document above for the full version.

Anova Applied Electronics, LLC. 092723-17 rev 10 Certification Application Attestation Statements Dat e: May 22, 2026 Am erican Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To W hom It May Concern: St atement for 47 CFR section 2.911(d)(5)(i) ______A nova Applied Electronics, LLC.______ certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Ad ditional Explanation: <N/A> St atement for 47 CFR section 2.911(d)(5)(ii) ______A nova Applied Electronics, LLC.______ (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☒ - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. Th e applicant also certifies that the device does not have cybersecurity and/or anti-virus software produced by Kaspersky Lab, Inc or any of its successors and assignees identified on the covered list installed on the device, nor will it be installed by the applicant at any time after certification. Tha nk you, By: Danny R Parker (S ignature 2 ) (Print name) Tit le: Senior Safety & Compliance Engineer Company: Anova Applied Electronics, LLC. Telephone: +1 864 634-5441 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters must be placed on appropriate letterhead.

Anova Applied Electronics, LLC. U.S. Agent Designation for Service of Process (Applicant is Both Grantee and U.S. Agent) TO : American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 1 - Letters must be placed on appropriate letterhead. The signee for the applicant must be one of the following: Applicant (grantee) contact of record in the FCC’s authorization system, or authorized officers or employee of the applicant (grantee). ATTENTION: FCC Certification – Section 2.911(d)(7) Information This letter is to confirm that the Applicant will also serve as the U.S. Agent for Service of Process as required by 47 CFR 2.911(d)(7). The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Co mmission-related proceeding involving the equipment. The Applicant further acknowledges their responsibility to i nform the FCC whenever the Designated U.S. Agent information changes. Applicant Company name: Anova Applied Electronics, LLC. FRN #: 0027368265 Grantee Code: 2APBO Contact Name: Danny R Parker Street Address: 10200 David Taylor Drive City/Province/Zip: Charlotte, NC 28262-2373, United States Telephone No: +1 864 634-5441 Email: [email protected] Applicant Signature 1 : Date: May 7, 2026 Signed by (Printed Name/Title): Danny R Parker / Senior Safety & Compliance Engineer

Anova Applied Electronics, LLC. Declaration Letter We Anova Applied Electronics, LLC. Hereby declares that the product Precision Cooker / AN625-10, the versions of the product available for import and sale in the US and Canada, or any units marked with the FCC ID or IC certification number, will not operation on channel 12 and 13. It will not be possible for users and configure these channels in the US and Canada version. Date: May 12, 2026 ________ Name / Title Danny R Parker / Senior Safety & Compliance Engineer Company: Anova Applied Electronics, LLC. Tel: +1 864 634-5441 Email: [email protected]

Anova Applied Electronics, LLC. 041521-14 Authority to Act as Agent Date: May 7, 2026 A merican Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 T o Whom It May Concern: ______Intertek Testing Service Shanghai______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____May 6, 2027 _____ By: Danny R Parker (Signature 1 ) (Print name) Title: Senior Safety & Compliance Engineer On behalf of: Anova Applied Electronics, LLC. (Company Name) Telephone: +1 864 634-5441

Anova Applied Electronics, LLC. 041521-14 Request for Confidentiality Da te: Su bject: Confidentiality Request for: ____2APBOAN625______ Pur suant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐Short Term☒PermanentBlock Diagrams ☐Short Term External Photos ☐Short Term☐Permanent * 1 Internal Photos ☐Short Term☒PermanentOperation Description ☐Short Term☒PermanentSchematics ☐Short TermTest Setup Photos ☐Short Term☐Permanent * 3 User’s Manual ____Ano va Applied Electronics, LLC.____ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Pe rmanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Shor t-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __(specify number of days not to exceed 180) 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NO TE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Si ncerely, By: Danny R Parker (Signature/Title 2 ) (Print name) 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests.

Page 1 of 4 External Photos Page 2 of 4 Page 3 of 4 Page 4 of 4

Classified as Internal Label-laser etching FCC ID: 2APBOAN625 IC:23717-AN625 PMN: AN625-10 Classified as Internal Rating label position

Page 1 of 6 Internal Photos Page 2 of 6 Page 3 of 6 Page 4 of 6 Page 5 of 6 2.4G/5G WiFi & BLE Antenna Page 6 of 6

Anova Applied Electronics, LLC. MPE ASSESSMENT REPORT Report Type: FCC MPE assessment report MODEL: AN625-10 REPORT NUMBER: 2601B0616SHA-004 ISSUE DATE: May 25, 2026 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-01_V1 © 2018 Intertek Intertek Testing Services (Shanghai FTZ) Co., Ltd Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-01_V1© 2018 Intertek Page 2 of 9 Report no.: 2601B0616SHA-004 Applicant: Anova Applied Electronics, LLC. 10200 David Taylor Drive, Charlotte, NC 28262 Manufacturer: Anova Applied Electronics, LLC. 10200 David Taylor Drive, Charlotte, NC 28262 Product Name: Precision Cooker Type/Model: AN625-10 FCC ID: 2APBOAN625 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part2.1093 FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Scout Gong Reviewer Eric Li Report No.: 2601B0616SHA-004 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 9 Revision History Report No. Version Description Issued Date 2601B0616SHA-004 Rev. 01 Initial issue of report May 25, 2026 Report No.: 2601B0616SHA-004 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 9 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: Precision Cooker Type/Model: AN625-10 Description of EUT: EUT is a precision cooker which supports Wi-Fi/BLE function. Rating: 120V AC, 60Hz, 1600W Category of EUT: Class B EUT type: Table top Floor standing Software Version: - Hardware Version: - Serial numbers: A260107-42-001 Sample received date: January 7, 2026 Date of test: January 7, 2026, to April 23, 2026 Report No.: 2601B0616SHA-004 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 9 1.2 Technical Specification Frequency Range: 2402-2480MHz Support Standards: Bluetooth Low Energy Type of Modulation: GFSK Channel Number: 40 Data Rate: 1MHz, 2MHz Channel Separation: 2MHz Antenna Information: 4.31 dBi, PCB antenna Frequency Band: 2400MHz ~ 2483.5MHz Support Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n(HT20), IEEE 802.11n(HT40) Type of Modulation: IEEE 802.11b: DSSS (CCK, DQPSK, DBPSK) IEEE 802.11g: OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n(HT20): OFDM (64-QAM, 16-QAM, QPSK, BPSK) IEEE 802.11n(HT40): OFDM (64-QAM, 16-QAM, QPSK, BPSK) Operating Frequency: 2412MHz to 2462MHz for IEEE 802.11b/g/n(HT20) 2422MHz to 2452MHz for IEEE 802.11n(HT40) Channel Number: 11 Channels for 802.11b, 802.11g ,802.11n(HT20) 7 Channels for 802.11n(HT40) Channel Separation: 5 MHz Antenna: PCB Antenna, 4.31 dBi Gain Report No.: 2601B0616SHA-004 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 9 Frequency Range: 5150 ~ 5250MHz 5250 ~ 5350MHz 5470 ~ 5725MHz 5725 ~ 5850MHz Support Standards: 802.11a, 802.11n(HT20), 802.11n(HT40) Type of Modulation: OFDM (BPSK, QPSK, 16QAM, 64QAM, 256QAM) Channel Number: For 5180 ~ 5240MHz band: Channel 36 - 48 For 5260 ~ 5320MHz Band: Channel 52 - 64 For 5500 ~ 5700MHz Band: Channel 100 - 140 For 5745 ~ 5825MHz band: Channel 149 - 165 Antenna: PCB Antenna, 3.75 dBi Gain 1.3 Description of Test Facility Name: Intertek Testing Services (Shanghai FTZ) Co., Ltd Address: Building 86, No. 1198 Qinzhou Road (North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L21189 FCC Accredited Lab Designation Number: CN0175 IC Registration Lab CAB identifier.: CN0014 VCCI Registration Lab Registration No.: R-14243, G-10845, C-14723, T-12252 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 2601B0616SHA-004 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 9 2 MPE Assessment Test Result: Pass 2.1 MPE Assessment Limit Mobile device exposure for standalone operations: Frequency range E-field strength (V/m) H-field strength (A/m) B-field (uT) Equivalent plane wave power density S eq (W/m 2 ) 0-1 Hz - 3,2 × 10 4 4 × 10 4 - 1-8 Hz 10 000 3,2 × 10 4 /f 2 4 × 10 4 /f 2 - 8-25 Hz 10 000 4 000/f 5 000/f - 0,025-0,8 kHz 250/f 4/f 5/f - 0,8-3 kHz 250/f 5 6,25 - 3-150 kHz 87 5 6,25 - 0,15-1 MHz 87 0,73/f 0,92/f - 1-10 MHz 87/f 1/2 0,73/f 0,92/f - 10-400 MHz 28 0,073 0,092 2 400-2 000 MHz 1,375 f 1/2 0,0037 f 1/2 0,0046 f 1/2 f/200 2-300 GHz 61 0,16 0,20 10 Mobile device exposure for simultaneous transmission operations: the sum of the MPE ratios for all simultaneously transmitting antennas incorporated in a host device is ≤ 1.0 Report No.: 2601B0616SHA-004 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 8 of 9 2.2 Assessment Results Power density (S) is calculated according to the formula: S = PG / (4πR²) Where S = power density in mW/cm² P = Radiated transmit power in mW G = numeric gain of transmit antenna R = distance (cm) As we can see from the test report 2601B0616SHA-001/-002/-003: The calculations in the table below use the highest gain of antenna for client EUT. These Note: 1 mW/cm2 from 1.3…

Text truncated - open the document above for the full version.

Shenzhen H&T Intelligent Control Co., Ltd. 1 / 6 Antenna Specification Version: 1.0 Update date: 2026-03-10 Model Name Dual-Band WiFi Antenna Manufacturer Shenzhen H&T Intelligent Control Co., Ltd. MPN 501746-B2501A Address D zone, 10/F, Shenzhen Academy of Aerospace Technology, Hi-Tech Park, South Zone, Shenzhen, China 518057 Shenzhen H&T Intelligent Control Co., Ltd. 2 / 6 Dual-band Antenna Design: Antenna Features Frequency 2.4GHz~2.5GHz,5.15GHz~5.85GHz Impedance 50 Ω VSWR 2.0 Max. Gain（Max.） [email protected]~2.5GHz,[email protected]~5.85GHz Radiation Omni-directional Polarization Linear Shenzhen H&T Intelligent Control Co., Ltd. 3 / 6 Antenna S11 Test: Antenna OTA Test Set-up: Shenzhen H&T Intelligent Control Co., Ltd. 4 / 6 OTA Test Report: Frequency（MHz） Gain（dBi） Efficiency（dB） Efficiency（%） 2400 4.27 -0.90 81.20 2410 4.31 -0.83 82.54 2420 3.92 -1.01 79.32 2430 3.57 -1.07 78.18 2440 3.82 -1.06 78.42 2450 4.00 -1.04 78.74 2460 3.85 -1.12 77.25 2470 3.23 -1.22 75.43 2480 2.96 -1.20 75.85 2490 2.78 -1.33 73.60 2500 3.07 -1.20 75.79 5150 3.04 -2.10 61.71 5180 2.70 -1.81 65.86 5230 1.25 -3.21 47.71 5280 3.07 -1.52 70.51 5330 2.19 -2.76 53.01 5380 3.41 -1.44 71.80 5430 2.46 -2.23 59.85 5480 2.44 -2.43 57.17 5530 3.62 -1.76 66.61 5580 2.99 -2.00 63.10 5630 3.75 -1.80 66.13 5680 3.11 -2.14 61.14 5730 3.57 -1.84 65.41 5780 3.49 -2.03 62.63 5830 3.16 -2.34 58.39 5880 3.18 -2.44 57.01 Shenzhen H&T Intelligent Control Co., Ltd. 5 / 6 Radiation Pattern for 2.45GHz Shenzhen H&T Intelligent Control Co., Ltd. 6 / 6 Radiation Pattern for 5.5GHz

Anova Applied Electronics, LLC. TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report MODEL: AN625-10 REPORT NUMBER: 2601B0616SHA-001 ISSUE DATE: May 25, 2026 DOCUMENT CONTROL NUMBER: TTRF15.247-02_V1 © 2018 Intertek Intertek Testing Services (Shanghai FTZ) Co., Ltd Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.247-02_V1 © 2018 Intertek Page 2 of 51 Report no.: 2601B0616SHA-001 Applicant: Anova Applied Electronics, LLC. 10200 David Taylor Drive, Charlotte, NC 28262 Manufacturer: Anova Applied Electronics, LLC. 10200 David Taylor Drive, Charlotte, NC 28262 Product Name: Precision Cooker Type/Model: AN625-10 FCC ID: 2APBOAN625 IC: 23717-AN625 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2024): Radio Frequency Devices (Subpart C) C63.10-2020 +Cor. 1-2023 +C63.10a-2024 +Errata to C63.10a-2024: American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Device – Corrigendum 1 RSS-247 Issue 4 (July 2025): Digital Transmission Systems, Frequency Hopping Systems and Licence-Exempt Local Area Network Devices in 902-928 MHz, 2400-2483.5 MHz, 5150-5350 MHz, and 5470-5895 MHz bands RSS-Gen Issue 5 (February 2021) Amendment 2: General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Scout Gong Reviewer Eric Li Report No.: 2601B0616SHA-001 TEST REPORT TTRF15.247-02_V1 © 2018 Intertek Page 3 of 51 Content REVISION HISTORY................................................................................................................................................ 5 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 6 1 GENERAL INFORMATION ............................................................................................................................. 7 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ................................................................................................ 7 1.2 TECHNICAL SPECIFICATION ................................................................................................................................ 7 1.3 DESCRIPTION OF TEST FACILITY .......................................................................................................................... 8 2 TEST SPECIFICATIONS ................................................................................................................................... 9 2.1 STANDARDS OR SPECIFICATION .......................................................................................................................... 9 2.2 MODE OF OPERATION DURING THE TEST ............................................................................................................ 9 2.3 TEST SOFTWARE LIST ..................................................................................................................................... 10 2.4 TEST PERIPHERALS LIST .................................................................................................................................. 10 2.5 TEST ENVIRONMENT CONDITION: .................................................................................................................... 10 2.6 INSTRUMENT LIST ......................................................................................................................................... 11 2.7 MEASUREMENT UNCERTAINTY ........................................................................................................................ 12 3 MINIMUM 6DB BANDWIDTH ..................................................................................................................... 13 3.1 LIMIT ......................................................................................................................................................... 13 3.2 MEASUREMENT PROCEDURE .......................................................................................................................... 13 3.3 TEST CONFIGURATION ................................................................................................................................... 13 3.4 TEST RESULTS OF MINIMUM 6DB BANDWIDTH ................................................................................................... 13 4 MAXIMUM CONDUCTED OUTPUT POWER AND E.I.R.P. ............................................................................. 14 4.1 LIMIT ......................................................................................................................................................... 14 4.2 MEASUREMENT PROCEDURE .......................................................................................................................... 14 4.3 TEST CONFIGURATION .........................................................................................................…

Text truncated - open the document above for the full version.

Anova Applied Electronics, LLC. TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report MODEL: AN625-10 REPORT NUMBER: 2601B0616SHA-002 ISSUE DATE: May 25, 2026 DOCUMENT CONTROL NUMBER: TTRF15.247-03_V1 © 2018 Intertek Intertek Testing Services (Shanghai FTZ) Co., Ltd Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.247-03_V1 © 2018 Intertek Page 2 of 78 Report no.: 2601B0616SHA-002 Applicant: Anova Applied Electronics, LLC. 10200 David Taylor Drive, Charlotte, NC 28262 Manufacturer: Anova Applied Electronics, LLC. 10200 David Taylor Drive, Charlotte, NC 28262 Product Name: Precision Cooker Type/Model: AN625-10 FCC ID: 2APBOAN625 IC: 23717-AN625 SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2024): Radio Frequency Devices (Subpart C) C63.10-2020 +Cor. 1-2023 +C63.10a-2024 +Errata to C63.10a-2024: American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Device – Corrigendum 1 RSS-247 Issue 4 (July 2025): Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5 (February 2021) Amendment 2: General Requirements…

Text truncated - open the document above for the full version.