2APEW-2K615ESR Geo Wallet with Find My , ESR Classic Geo Card Holder

1. Assurez-vous que votre porte-cartes est connecté à votre iPhone*. 2. Ouvrez l'application Localiser. 3. Dans l'onglet Objets, appuyez sur le porte-cartes. 4. Appuyez sur Supprimer l'Objets, puis sur Supprimer et confirmez pour supprimer. *S'il n'est pas connecté lorsque vous supprimez votre porte-cartes de votre identifiant Apple, il ne sera plus détectable et vous devrez effectuer une réinitialisation d'usine avant de créer une nouvelle connexion (voir « Mise en route > Réinitialisation d'usine » ci-dessus). Supprimer votre porte-cartes de votre identifiant Apple permettra à une autre personne de l'activer et de l'utiliser. Supprimer votre porte-cartes Si votre porte-cartes est séparé de votre iPhone et est détecté en déplacement avec une autre personne possédant un appareil Apple au fil du temps, cette personne recevra un message d'alerte de suivi. Notification de suivi indésirable 1. N'exposez pas l'appareil à des températures inférieures à -10 °C ou supérieures à 35 °C. 2. N'exposez pas l'appareil à une flamme nue, ne l'immergez pas dans l'eau et ne l'exposez pas à la pluie, car cela l'endommagerait. 3. Vérifiez toujours que l'appareil, les câbles ou les autres accessoires ne sont pas endommagés avant d'utiliser l'appareil. S'ils sont endommagés, n'utilisez pas l'appareil. 4. N'essayez pas de démonter, de modifier ou d'utiliser des objets tranchants pour endommager l'appareil de quelque manière que ce soit, car cela pourrait provoquer de graves dommages et annuler la garantie. 5. N'exposez pas l'appareil à des liquides corrosifs ou à une forte humidité, car ils endommageraient gravement l'appareil et annuleraient la garantie. Avertissements de sécurité • Utilisez le câble fourni pour charger. • Pendant le chargement, le voyant sera orange. • Lorsqu'il est complètement chargé, le voyant deviendra vert. • Il est recommandé de charger complètement votre porte-cartes une fois tous les 5 mois Chargement de votre porte-cartes FR Compatibilité Le porte-cartes Geo est uniquement compatible avec les iPhones exécutant iOS 14.5 ou une version ultérieure avec l'authentification à deux facteurs activée. Configuration de votre iPhone • Sur votre iPhone : accédez à Réglages > votre nom (identifiant Apple)> Connexion et sécurité. Appuyez sur Activer l'identification à deux facteurs. Appuyez ensuite sur Continuer et suivez les instructions à l'écran. • Sur votre Mac : choisissez le menu Apple > Réglages système (ou Préférences système), puis cliquez sur votre nom (identifiant Apple). Cliquez sur Connexion et sécurité. À côté de l'identification à deux facteurs, cliquez sur Activer et suivez les instructions à l'écran. • Sur le Web : rendez-vous sur appleid.apple.com et connectez-vous avec votre identifiant Apple. Répondez aux questions de sécurité, puis touchez Continuer. Touchez Continuer lorsque vous êtes invité à mettre à niveau la sécurité du compte. Touchez ensuite Mettre à niveau la sécurité du compte et suivez les instructions à l’écran. 1. Activez l'identification à deux facteurs pour votre identifiant Apple A. Accédez à Réglages. B. Appuyez sur votre nom, puis sur Localiser. C. Appuyez sur Localiser mon iPhone et activez Localiser mon iPhone. 2. Activez Localiser 3. Activez le Bluetooth 4. Connectez-vous à un réseau Wi-Fi ou cellulaire stable Accédez à Réglages > Confidentialité et sécurité > Services de localisation > activez les services de localisation. 5. Activez les services de localisation 1. Assicurarsi che il portafoglio sia collegato all'iPhone*. 2. Aprire l'applicazione Dov'è. 3. Nella scheda Oggetti, toccare il portafoglio. 4. Toccare Rimuovi elemento, toccare Rimuovi e confermare per rimuovere. *Se il portafoglio non è collegato al momento della rimozione dall'ID Apple, non sarà più rilevabile e sarà necessario eseguire un ripristino di fabbrica prima di creare una nuova connessione (vedere "Operazioni preliminari > Ripristino di fabbrica" in alto). Rimuovendo il portafoglio dal proprio ID Apple, sarà possibile attivarlo e utilizzarlo da un'altra persona. Rimozione del portafoglio Se il portafoglio viene separato dall'iPhone e nel tempo viene rilevato il movimento di un'altra persona con un dispositivo Apple, questa riceverà un messaggio di avviso di tracciamento. Notifica di tracciamento indesiderato 1. Non esporre il dispositivo a temperature inferiori a -10°C o superiori a 35°C. 2. Non esporre il dispositivo a fiamme libere, non immergerlo in acqua e non esporlo alla pioggia per non danneggiarlo. 3. Prima di utilizzare il dispositivo, verificare sempre che non vi siano danni al dispositivo, ai cavi o ad altri accessori. Se danneggiato, non utilizzare il dispositivo. 4. Non tentare di smontare, modificare o utilizzare oggetti appuntiti per danneggiare il dispositivo in alcun modo, poiché ciò potrebbe causare gravi danni e invalidare la garanzia. 5. Non esporre il dispositivo a liquidi corrosivi o ad alta umidità per non danneggiarlo seriamente e invalidare la garanzia. Avvertenze di sicurezza • Per la ricarica utilizzare il cavo in dotazione. • Durante la carica, la spia di stato è arancione. • Quando la carica è completa, la luce di stato diventa verde. • Si consiglia di ricaricare completamente il portafoglio ogni 5 mesi. Ricarica del portafoglio IT Compatibilità Geo Wallet è compatibile solo con gli iPhone con sistema operativo iOS 14.5 o successivo e con l'Autenticazione a due fattori attivata. Impostazione dell'iPhone • Sul vostro iPhone: Accedere a Impostazioni > il proprio nome > Accesso e sicurezza. Scegliere "Attiva autenticazione a due fattori". Proseguire con "Continua" e seguire le istruzioni sullo schermo. • Sul Mac: scegliete Menu Apple > Impostazioni di sistema (o Preferenze di sistema), cliccate sul vostro nome (o ID Apple). Fare clic su "Accesso e sicurezza". Accanto a Autenticazione a due fattori, fate clic su Attiva e seguite le istruzioni sullo schermo. • Sul web: Andate su appleid.apple.com e accedete utilizzando il vostro ID Apple. Rispondere alle doman…

Text truncated - open the document above for the full version.

FCC ID: 2APEW-2K615 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. 1. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC RF exposure statement:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. IC: 24790-2K615 HVIN:2K615 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and (2)this device must accept any interference, including interference that may cause undesired operation of the device." RF exposure statement:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil nedoit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement." Déclaration d'exposition RF:L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction. EN Declaration of Conformity This product is intended for use within Europe. Electronic Silk Road Corp. hereby declares that this product 2K614 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU,2014/35/EU,2014/30/EU. The Declaration of Conformity for the 2K614 is available from www.esrgear.com Konformitätserklärung Dieses Produkt ist für die Verwendung in Europa vorgesehen. Electronic Silk Road Corp. erklärt hiermit, dass dieses Produkt 2K614 die wesentlichen Anforderungen und andere relevante Bestimmungen der Richtlinie 2014/53/EU, 2014/35/EU, 2014/30/EU erfüllt. Die Konformitätserklärung für 2K614 ist unter www.esrgear.com erhältlich. Declaración de conformidad Este producto está diseñado para su uso dentro de Europa. Electronic Silk Road Corp. declara por la presente que este producto 2K614 cumple con los requisitos esenciales y otras disposiciones relevantes de la Directiva 2014/53/EU, 2014/35/EU, 2014/30/EU. La Declaración de conformidad para el 2K614 está disponible en www.esrgear.com Dichiarazione di conformità Questo prodotto è destinato all'uso in Europa. Electronic Silk Road Corp. dichiara che questo prodotto 2K614 è conforme ai requisiti essenziali e alle altre disposizioni pertinenti della direttiva 2014/53/UE,2014/35/UE,2014/30/UE. La dichiarazione di conformità per il 2K614 è disponibile su www.esrgear.com DE ES IT Déclaration de Conformité Ce produit est destiné à être utilisé en Europe. Electronic Silk Road Corp. déclare par la présente que ce produit 2K614 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 2014/53/UE,2014/35/UE,2014/30/UE. La déclaration de conformité pour le 2K614 est disponible sur www.esrgear.com Deklaracja zgodnosci Ten produkt jest przeznaczony do uzytku w Europie.Firma Electronic Silk Road Corp. niniejszym oswiadcza,ze ten produkt 2K614 jest zgodny z podstawowymi wymaganiami i innymi stosownymi postanowieniami dyrektyw 2014/53/UE,2014/35/UE,2014/30/UE Deklaracja zgodnosci 2K614 jest dostepna na stronie www.esrgear.com FR PL This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. This product complies with the radio interference requirements of the European Community. ESR Classic Geo Card Holder MODEL: 2K614 封底 The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch. To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple, Apple Fin…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: Sahara Case LLC FRN: 0033710385 Contact Name: Paul Address: 199 E 52nd St, Suite 100 Telephone No: 208 941 3448 Email: [email protected] Applicant: Company name: Electronic Silk Road (Shenzhen) Tech Co., Ltd FRN: 0027407030 Product Description: ESR Geo Wallet with Find My，ESR Classic Geo Card Holder Grantee code: 2APEW FCC ID: 2APEW-2K615 Contact Name: Serena Jiang Address: Room 1601, Building 1D, Creative City, Liu Xian Avenue, Nan Shan District, Shenzhen,Guangdong,China Telephone No: 0755-85295066 Email: [email protected] [Electronic Silk Road (Shenzhen) Tech Co., Ltd] certifies that, as of the date of this filing of the application with the TCB, [Sahara Case LLC] is our designated US agent for service of process for the above referenced FCC ID. [Electronic Silk Road (Shenzhen) Tech Co., Ltd] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [Sahara Case LLC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 08.19.2024 Applicant’s Name: Serena Jiang US Agent’s Name: Paul Title: Engineer Title: Manager Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Electronic Silk Road (Shenzhen) Tech Co., Ltd FRN: 0027407030 Grantee code: 2APEW FCC ID: 2APEW-2K615 Contact Name: Serena Jiang Address: Room 1601, Building 1D, Creative City, Liu Xian Avenue, Nan Shan District, Shenzhen,Guangdong,China Telephone No: 0755-85295066 Fax No: Email: [email protected] i. [Electronic Silk Road (Shenzhen) Tech Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Electronic Silk Road (Shenzhen) Tech Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Electronic Silk Road (Shenzhen) Tech Co., Ltd certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 08.19.2024 Applicant’s Name: Serena Jiang Title: Engineer Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Electronic Silk Road (Shenzhen) Tech Co., Ltd Product Similarity Declaration Product name: ESR Geo Wallet with Find My, ESR Classic Geo Card Holder Model name: 2K615, 2K614 FCC ID: 2APEW-2K615 We (Electronic Silk Road (Shenzhen) Tech Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), the only difference is the model name, colors, product name(The product name of the 2K615 is ESR Geo Wallet with Find My, and the product name of the 2K614 is ESR Classic Geo Card Holder) and appearance(2K614 is a card bag, 2K615 is a wallet). Demonstrate the detail (descriptions and pictures) as to the difference list above. 2K615: 2K614： Signature: Name: Serena Jiang Title: Engineer Date: 2024-08-19

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: Electronic Silk Road (Shenzhen) Tech Co., Ltd Address: Room 1601, Building 1D, Creative City, Liu Xian Avenue, Nan Shan District, Shenzhen,Guangdong,China Product Name: ESR Geo Wallet with Find My，ESR Classic Geo Card Holder Model Numbers: 2K615, 2K614 FCC Identifier: 2APEW-2K615 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Serena Jiang Date: 8/19/2024 Title: Engineer Signature of applicant:

C5266091_X10_Ed.1 1/1 Electronic Silk Road (Shenzhen) Tech Co., Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 8/19/2024 Subject: Request for Confidentiality FCC ID: 2APEW-2K615 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality ID Label/Location No No Attestation Statement No No External Photos No Block Diagram Schematics Test Report No No Test Setup Photos No User’s Manual Internal Photos Parts List / Tune Up RF Exposure Info Operational Description Cover Letter(s) No No SDR Software / Security Info No Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Serena Jiang Date: 8/19/2024 Title: Engineer

Page 1 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT (External Photos) Model: 2K615 Page 2 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Page 3 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Page 4 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Page 5 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Model: 2K614 Page 6 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected]

1 2 .镭雕图形大小需要与图纸一致 .此图比例为1：1 注： 2K614-多卡卡包 产品信息工艺文档 压印区域 效果示意 镭雕区域 Presented by ESR JIAHUI 2024/08/20 38.6mm 30.9mm Input: 5V 0.05A ESR Classic Geo Card Holder Model:2K614 IC:24790-2K615 FCC ID:2APEW-2K615 Output: 0.03W Made in China 110mAh 3.7V SN:XXXXXXXXXXXXXXX Input: 5V 0.05A ESR Classic Geo Card Holder Model:2K614 IC:24790-2K615 FCC ID:2APEW-2K615 Output: 0.03W Made in China 110mAh 3.7V SN:XXXXXXXXXXXXXXX Input: 5V 0.05A ESR Classic Geo Card Holder Model:2K614 IC:24790-2K615 FCC ID:2APEW-2K615 Output: 0.03W Made in China 110mAh 3.7V SN:XXXXXXXXXXXXXXX HVIN：2K615HVIN：2K615HVIN：2K615

1 2 .镭雕图形大小需要与图纸一致 .此图比例为1：1 注： 2K615-定位钱包 产品信息工艺文档 压印区域 效果示意 镭雕区域 Input: 5V 0.05A ESR Geo Wallet with Find My Model:2K615 IC:24790-2K615 FCC ID:2APEW-2K615 Output: 0.03W Made in China 110mAh 3.7V SN:XXXXXXXXXXXXXXX Presented by ESR JIAHUI 2024/08/19 37.7mm 30.9mm Input: 5V 0.05A ESR Geo Wallet with Find My Model:2K615 IC:24790-2K615 FCC ID:2APEW-2K615 Output: 0.03W Made in China 110mAh 3.7V SN:XXXXXXXXXXXXXXX Input: 5V 0.05A ESR Geo Wallet with Find My Model:2K615 IC:24790-2K615 FCC ID:2APEW-2K615 Output: 0.03W Made in China 110mAh 3.7V SN:XXXXXXXXXXXXXXX HVIN：2K615 HVIN：2K615HVIN：2K615

Page 1 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: 2K615 Page 2 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] ANT Page 3 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Page 4 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Model: 2K614 Page 5 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] ANT Page 6 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected]

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] RF EXPOSURE Test Report Report No.: MTi240614003-01E2 Date of issue: 2024-07-31 Applicant: Electronic Silk Road (Shenzhen) Tech Co., Ltd Product: ESR Geo Wallet with Find My，ESR Classic Geo Card Holder Model(s): 2K615, 2K614 FCC ID: 2APEW-2K615 Shenzhen Microtest Co., Ltd. http://www.mtitest.cn - Page 2 of 6- Report No.: MTi240614003-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 6- Report No.: MTi240614003-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] TEST RESULT CERTIFICATION Applicant: Electronic Silk Road (Shenzhen) Tech Co., Ltd Address: Room 1601, Building 1D, Creative City, Liu Xian Avenue, Nan Shan District, Shenzhen,Guangdong,China Manufacturer: Electronic Silk Road (Shenzhen) Tech Co., Ltd Address: Room 1601, Building 1D, Creative City, Liu Xian Avenue, Nan Shan District, Shenzhen,Guangdong,China Product description Product name: ESR Geo Wallet with Find My，ESR Classic Geo Card Holder Trademark: ESR Model Name: 2K615 Serial Model 2K614 Standards: N/A Test procedure: KDB 447498 D01 v06 Date of Test Date (s) of performance of tests: 2024-07-11 to 2024-07-27 Test Result: Pass Test Engineer : (Maleah Deng) Reviewed By : (David Lee) Approved By : (Leon Chen) - Page 4 of 6- Report No.: MTi240614003-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] Table of Contents 1. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS ............................................................................................ 5 2. SAR TEST EXCLUCSION THRESHOLDS ........................................................................................................................ 6 - Page 5 of 6- Report No.: MTi240614003-01E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: 0755-88850135-1439 Mobile: 131-4343-1439 (Wechat same number) Web: http://www.mtitest.cn E-mail: [email protected] 1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance defined in 4.1 f) is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified, typically in the SAR measurement or SAR analysis report, by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting are required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions. a) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f (GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison  The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion. b) For 100 MHz to 6 GHz and test sep…

Text truncated - open the document above for the full version.