2APLE18300402arlo Pro 4

© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. Other trademarks are for reference purposes.Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à arlo.com/docs . (If this product is sold in Canada, you can access this document in Canadian French at arlo.com/docs .) For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/ . Arlo Technologies Intl. Ltd. Ground Floor, Building 3 University Technology Center Curraheen Road, Cork, T12 EF21 Ireland Arlo Technologies, Inc. 2200 Faraday Avenue, Suite 150 Carlsbad, CA 92008 USA Set up your Arlo Pro 3 Wire-Free camera 1. Connect the power adapter and the Ethernet cable to your Arlo SmartHub. 2. Download the Arlo app and follow the setup instructions for a wire-free camera. 3. Insert the battery into your wire-free camera. July 2019 DRAFT Need help? What’s in the box We are here for you. Visit www.arlo.com/support for quick answers and resources: • How-to videos• Troubleshooting tips• The Arlo Support phone number for your location Camera charging cable Arlo SmartHub SmartHub power adapter Ethernet cablePro 3 Wire-Free Camera Rechargeable battery Mounts Camera power adapter Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device complies with ISED's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (…

Text truncated - open the document above for the full version.

Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 D ate: July 27, 2020 We, Arlo Technologies, Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: 2APLE18300402 I f you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! ______________________________ Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States T el: 408-890-3034/Fax: 925-337-3724 Declaration of label location letter D ate: 2020/07/23 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement FCC ID: 2APLE18300402 The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! --------------------------------------- Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

SCS-F19: Confidentiality Request Letter Page 1 of 3 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526- 1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 3 R e v 6.0 Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States T e l: 408-890-3034/Fax: 925-337-3724 Da te: 2020/07/23 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2APLE18300402 Pu r suant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, _______________________ Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 3 of 3 R e v 6.0 Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States T e l: 408-890-3034/Fax: 925-337-3724 Date: 2020/ 07/23 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: 2APLE18300400 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 █ days; or for a specified date of / / not to exceed 180 days from the Grant Date. See KDB 726920. - User Manual - Internal Photos - Test Setup photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, _________________________ Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]


   
 
ဆဆငင


 
စဉင
 

ဓဆငငဒ
! 

 "
ဈငဒ$ဒဓင$ဇငဇဈ&'"
ဓဆဉ$ဇဇထ$ဇထဆဈ

)*+,-
*
*-.,/














ဆငဆင ငထ ဆဇ


 
0"
ဆ)1,စဒဇငငဈငဆ



   
 








စဆ

စဇ

ဆဈ
!

"
#$%





&'(
)

)*+


,)
"


"
-'(
++



.




/0
"1

%"
"











2222222222222222222222222
30
4&

56
5+"
4&
7+
/
ဈငဒ#ဒဓင#ဇငစဉ
;<
ဈငဒ#ဓငထ#ဒစတထ
7#&
&&>&
To whom it may concern: We, the undersigned, hereby authorize Debby Lin of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Debby Lin of BV CPS Taoyuan within the scope of this authorization shall have the same effects as our own. If you have any questions regarding the authorization, please don't hesitate to contact us. Thank you. Sincerely yours,

Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, Un ited States Tel: 408-890-3034/Fax: 925-337-3724 Date: July 29, 2020 Attestation FCC ID: 2APLE18300402 To Whom It May Concern: The initial application has been granted according to 47CFR Part 15 for FCC ID: 2APLE18300400 ; Granted on 08/28/2019 . The new equipment to be Granted in this new applica tion, according to FCC ID: 2APLE18300402 only differs from the initial version (FCC ID: 2APLE18300400 ) with the only following points Hardware changed as below for new FCC ID: 2APLE18300402 , other as same (Please refer to the Internal Photo s exhibits) a. Add battery(A-7A) b. Changed the relate components 1. Change DDR size 1G to 2G (Memory chip size only. Form, fit and function the same.) 2. Addithe secure element IC request (Only active w hen connecting with the WiFi hub. Stores security c ode for WiFi hub.) 3. Adding filtering capacitors for ICR and WLED/IRL ED 4. PWB change to match the new chip (Change CODEC p ower) 5. PWB change to match the new chip. This will caus e the safety and CEC testing to be redone. This changes described above do not affect the WiFi _2.4G test data retrieved from the initial applicat ion FCC ID: 2APLE18300400 can be re-used for the FCC ID: 2APLE18300402 equipment. Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, Un ited States Tel: 408-890-3034/Fax: 925-337-3724 Date: July 29, 2020 However, Based on our knowledge and our engineering judgment of the device design, the changes made, t he format and amount of spot–check test data are decided as below: 1. Sample amount: 1 2. Spot–check rule part, frequency band and test items as below 3. Spot–check measurement result refer to the test rep ort of FCC ID: 2APLE18300402 The associated 47 CFR Part 15 tests reports (initia l & new versions) are described in the following ta ble: FCC ID: 2APLE18300400 (initial) FCC ID: 2APLE18300402 (new) Spot check Test Item (one of worst mode) 47CFR Part 15C – RF Wi-Fi 47CFR Part 15C – RF Wi-Fi - All test data re-test 1. Radiated Emission Test 2. Power Line Conducted Emission 3. Antenna Port Conducted Measurement We, Arlo Technologies, Inc. is taking full responsibility to re-test these tes t data for its new application FCC ID: 2APLE18300402 If you have any questions, feel free to contact us. Thank you. Sincerely yours, Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, Un ited States Tel: 408-890-3034/Fax: 925-337-3724 Date: July 29, 2020 _________ Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

Reference No.:200703E01-1 CONSTRUCTION PHOTOS OF EUT Reference No.:200703E01-1 Reference No.:200703E01-1 Reference No.:200703E01-1 Adapter: AD2037320 Reference No.:200703E01-1 Adapter: 2ADB010B NJ Reference No.:200703E01-1 Reference No.:200703E01-1 Adapter: AD2151320 Reference No.:200703E01-1 Reference No.:200703E01-1 Reference No.:200703E01-1 Reference No.:200703E01-1 Reference No.:200703E01-1

Reference No.:200703E01-2 CONSTRUCTION PHOTOS OF EUT Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2 Reference No.:200703E01-2

Report No.: SA190627E03 R2 Page No. 1 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA190627E03 dated Aug. 16, 2019 Cancels and replaces the report No.: SA190627E03 R1 dated Aug. 23, 2019 RF Exposure Report Report No.: SA190627E03 R2 FCC ID: 2APLE18300400 Test Model: VMC4040P PCBA Rev: Main BD: v035 version Sensor BD: v045 version Received Date: June 27, 2019 Test Date: July 18, 2019 Issued Date: Aug. 28, 2019 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA190627E03 R2 Page No. 2 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA190627E03 dated Aug. 16, 2019 Cancels and replaces the report No.: SA190627E03 R1 dated Aug. 23, 2019 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA190627E03 R2 Page No. 3 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA190627E03 dated Aug. 16, 2019 Cancels and replaces the report No.: SA190627E03 R1 dated Aug. 23, 2019 Release Control Record Issue No. Description Date Issued SA190627E03 Original release. Aug. 16, 2019 SA190627E03 R1 Revised PCBA version. Aug. 23, 2019 SA190627E03 R2 Revised PCBA version. Aug. 28, 2019 Report No.: SA190627E03 R2 Page No. 4 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA190627E03 dated Aug. 16, 2019 Cancels and replaces the report No.: SA190627E03 R1 dated Aug. 23, 2019 1 Certificate of Conformity Product: arlo Pro 3 Brand: Arlo Test Model: VMC4040P PCBA Rev: Main BD: v035 version Sensor BD: v045 version Sample Status: Pre Production units Applicant: Arlo Technologies, Inc. Test Date: July 18, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Aug. 28, 2019 Wendy Wu / Specialist Approved by : , Date: Aug. 28, 2019 May Chen / Manager Report No.: SA190627E03 R2 Page No. 5 / 6 Report Format Version: 6.1.1 Cancels and replaces the report No.: SA190627E03 dated Aug. 16, 2019 Cancels and replaces the report No.: SA190627E03 R1 dated Aug. 23, 2019 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.…

Text truncated - open the document above for the full version.

Report No.: SA190627E03A Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 200703E01 RF Exposure Report Report No.: SA190627E03A FCC ID: 2APLE18300402 Original FCC ID: 2APLE18300400 Test Model: VMC4041P PCBA Rev: Main BD: v035 version Sensor BD: v045 version Received Date: July 03, 2020 Test Date: July 21, 2020 Issued Date: July 27, 2020 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: SA190627E03A Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 200703E01 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA190627E03A Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 200703E01 Release Control Record Issue No. Description Date Issued SA190627E03A Original release. July 27, 2020 Report No.: SA190627E03A Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 200703E01 1 Certificate of Conformity Product: arlo Pro 4 Brand: Arlo Test Model: VMC4041P PCBA Rev: Main BD: v035 version Sensor BD: v045 version Sample Status: Pre Production units Applicant: Arlo Technologies, Inc. Test Date: July 21, 2020 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.1-1992 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: July 27, 2020 Vivian Huang / Specialist Approved by : , Date: July 27, 2020 Clark Lin / Technical Manager Report No.: SA190627E03A Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 200703E01 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain Transmitter Circuit Antenna Net Gain(dBi) Frequency range (GHz to GHz) Antenna Type Connector Type Chain (0) Main 2.0 2.4~2.4835 Monopole NA Chain (1) Secondary 3.0 2.4~2.4835 Monopole NA Note: Max. gain was selected for the final test. *The above Antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: SA190627E03A Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: …

Text truncated - open the document above for the full version.

Report No.: RF190627E03A Page No. 1 / 33 Report Format Version: 6.1.2 Reference No.: 200703E01 FCC Test Report (Spot Check) Report No.: RF190627E03A FCC ID: 2APLE18300402 Original FCC ID: 2APLE18300400 Test Model: VMC4041P Received Date: July 03, 2020 Test Date: July 20 to 21, 2020 Issued Date: July 27, 2020 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF190627E03A Page No. 2 / 33 Report Format Version: 6.1.2 Reference No.: 200703E01 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ..........................…

Text truncated - open the document above for the full version.