2APLE18300405Pro 3 Floodlight Camera

© Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC. Other trademarks are for reference purposes.For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/ . Arlo Technologies Intl. Ltd. Ground Floor, Building 3 University Technology Center Curraheen Road, Cork, T12 EF21 Ireland Arlo Technologies, Inc. 2200 Faraday Avenue, Suite 150 Carlsbad, CA 92008 USA Set up your Pro 3 Floodlight Camera 1. Download the Arlo app. 2. Follow the app instructions to add        January 2020 Battery Floodlight with integrated camera MicroUSB charging port Magnetic charging port Battery access button Grip Need help?We are here for you. Visit www.arlo.com/support for quick answers and resources:• How-to videos•     • The Arlo Support phone number for your location Extended Battery What’s in the box Floodlight Camera Wall Plate Screw Kit Charging Cable Power Adapter Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement: les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5 850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device complies with ISED's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel …

Text truncated - open the document above for the full version.

Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 Date: January 21, 2020 We, Arlo Technologies, Inc. declare that the device does not support channel 12 ~ 13 in 2.4GHz band and any non-US channels in all the operational mode(s) for the following product. FCC ID: 2APLE18300405 If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 Date: January 21, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Declaration letter for label requirement FCC ID: 2APLE18300405 The label is permanent affixed in the battery compartment, and the EUT will be selling to market without the battery installed. The users can see the label during the battery installation process. The battery cover can be opened without any special tools. Please don’t hesitate to contact us, if you have any question(s). Thank you! If you should have any question(s) regarding this declaration, please don’t hesitate to contact us. Thank you! Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 Date: 2020/01/15 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2APLE18300405 P ursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - e.g. Block Diagram - e.g. Schematics - e.g. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected] SCS-F19: Confidentiality Request Letter Page 2 of 2 R ev 6.0 Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States T el: 408-890-3034/Fax: 925-337-3724 Da te: 2020/01/15 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: 2APLE18300405 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 █ days; or for a specified date of / / not to exceed 180 days from the Grant Date. See KDB 726920. - e.g. User Manual - e.g. Internal Photos - e.g. Test Setup photos - etc. External photos - etc. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 POWER OF ATTORNEY Date: 2020/01/15 FCC ID: 2APLE18300405 We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to Contact us. Sincerely yours, Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

Reference No.: 191218E03-1 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 191218E03-1 Page 2 Reference No.: 191218E03-1 Page 3 Reference No.: 191218E03-1 Page 4 Antenna Reference No.: 191218E03-1 Page 5 Battery Reference No.: 191218E03-1 Page 6 Adapter: AD2037320 Reference No.: 191218E03-1 Page 7 Reference No.: 191218E03-1 Page 8 Adapter: 2ADB010B Reference No.: 191218E03-1 Page 9 Reference No.: 191218E03-1 Page 10 Adapter: AD2151320 Reference No.: 191218E03-1 Page 11 Reference No.: 191218E03-1 Page 12 Reference No.: 191218E03-1 Page 13

(Fig. 1)
ဆ စဒဇငငဈငဉ 
 FCC/IC LABEL LOCATION FCC LABEL LOCATION The label is permanent affixed in the battery compartment EUT Label LABEL LOCATION The label is permanent affixed in the battery compartment

REV DESCRIPTION OF REVISION ENG APPDDATE THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR WHEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF ARLO, INC. K CRANDALLPRODUCTION RELEASE0106JAN20 272-50038-01 Made in Vietnam S/N Pro 3 Model: FB1001 Floodlight Camera Input Rating: 5V 2A or 9V 1A FCC ID: 2APLE18300405 IC: 23815-18300405 CAN ICES-3 (B)/NMB-3(B) arlo ® ARLO TECHNOLOGIES INTL. LTD, Ground Floor, Building 3, University Technology Centre, Curraheen Road, Cork T12 EF21, Ireland This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Reference No.: 191218E03-2 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 191218E03-2 Page 2 Reference No.: 191218E03-2 Page 3 Reference No.: 191218E03-2 Page 4 Reference No.: 191218E03-2 Page 5 Reference No.: 191218E03-2 Page 6 Reference No.: 191218E03-2 Page 7 Reference No.: 191218E03-2 Page 8 Reference No.: 191218E03-2 Page 9 Reference No.: 191218E03-2 Page 10 Reference No.: 191218E03-2 Page 11 Reference No.: 191218E03-2 Page 12 Reference No.: 191218E03-2 Page 13 Reference No.: 191218E03-2 Page 14 Reference No.: 191218E03-2 Page 15

Reference No.: 191218E03-2 Page 16 Reference No.: 191218E03-2 Page 17 Reference No.: 191218E03-2 Page 18 Reference No.: 191218E03-2 Page 19 Reference No.: 191218E03-2 Page 20 Reference No.: 191218E03-2 Page 21 Reference No.: 191218E03-2 Page 22 Antenna Reference No.: 191218E03-2 Page 23 Battery Reference No.: 191218E03-2 Page 24 Reference No.: 191218E03-2 Page 25 Adapter: AD2037320 Reference No.: 191218E03-2 Page 26 Reference No.: 191218E03-2 Page 27 Adapter: 2ADB010B Reference No.: 191218E03-2 Page 28 Adapter: AD2151320 Reference No.: 191218E03-2 Page 29 Reference No.: 191218E03-2 Page 30 Reference No.: 191218E03-2 Page 31

Report No.: SA191218E03 Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 190812E03 RF Exposure Report Report No.: SA191218E03 FCC ID: 2APLE18300405 Test Model: FB1001 PCBA Rev: V035 Received Date: Dec. 18, 2019 Test Date: Jan. 13, 2020 Issued Date: Jan. 21, 2020 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA191218E03 Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 190812E03 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA191218E03 Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 190812E03 Release Control Record Issue No. Description Date Issued SA191218E03 Original release. Jan. 21, 2020 Report No.: SA191218E03 Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 190812E03 1 Certificate of Conformity Product: Pro 3 Floodlight Camera Brand: Arlo Test Model: FB1001 PCBA Rev: V035 Sample Status: Pre Production Unit Applicant: Arlo Technologies, Inc. Test Date: Jan. 13, 2020 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Jan. 21, 2020 Vivian Huang / Specialist Approved by : , Date: Jan. 21, 2020 Clark Lin / Technical Manager Report No.: SA191218E03 Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 190812E03 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20 cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain Antenna No. Antenna Net Gain(dBi) Frequency range (GHz) Antenna Type Connector Type R 2.8 2.4~2.4835 Monopole NA L 2.9 2.4~2.4835 Monopole NA Note: Max. gain was selected for the final test. Report No.: SA191218E03 Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 190812E03 2.5 Calculation Result of Maximum Conducted Power Operation Mode Evaluation Frequency (MHz) Max Power (mW) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) WLAN 2.4GHz 2437 583.44…

Text truncated - open the document above for the full version.

Report No.: RF191218E03 Page No. 1 / 51 Report Format Version: 6.1.2 FCC Test Report Report No.: RF191218E03 FCC ID: 2APLE18300405 Test Model: FB1001 PCBA Rev: V035 Received Date: Dec. 18, 2019 Test Date: Jan. 07 to 13, 2020 Issued Date: Jan. 21, 2020 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF191218E03 Page No. 2 / 51 Report Format Version: 6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards and references ............................................................... 15 4 Test Types and Results ...................................................................................................................... 16 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 16 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 16 4.1.2 Test Instruments ................................................................................................................................ 17 4.1.3 Test Procedures ................................................................................................................................. 19 4.1.4 Deviation from Test Standard ............................................................................................................ 20 4.1.5 Test Setup .......................................................................................................................................... 20 4.1.6 EUT Operating Conditions ................................................................................................................. 21 4.1.7 Test Results ....................................................................................................................................... 22 4.2 Conducted Emission Measurement .................................................................................................. 33 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 33 4.2.2 Test Instruments ................................................................................................................................ 33 4.2.3 Test Procedures ................................................................................................................................. 34 4.2.4 Deviation fr…

Text truncated - open the document above for the full version.

Reference No.: 191218E03 Page No. 1 / 3 Reference No.: PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST Reference No.: 191218E03 Page No. 2 / 3 Reference No.: RADIATED EMISSION TEST (Below 1GHz) Reference No.: 191218E03 Page No. 3 / 3 Reference No.: RADIATED EMISSION TEST (Above 1GHz)