2APLE18300410arlo ULTRA

1. Connect the power adapter and the Ethernet cable to your Arlo SmartHub. 2. Download the Arlo app and follow the setup instructions for a wire-free camera. 3. Insert the battery into your wire-free camera. Set up your Arlo Ultra Wire-Free camera © Arlo Technologies, Inc. Arlo, Arlo logo, and Every Angle Covered are trademarks of Arlo Technologies, Inc. Other trademarks are for reference purposes only. Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à arlo.com/ docs. (If this product is sold in Canada, you can access this document in Canadian French at arlo.com/docs.) For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/. What’s in the box To view tutorial videos, find troubleshooting tips, or get support, visit www.arlo.com/support. Have questions? Arlo International, Ltd. Floor 3, Building 3 University Technology Center Curraheen Road, Cork, Ireland Arlo Technologies, Inc. 2200 Faraday Avenue, Suite 150 Carlsbad, CA 92008 USA October 2018 Camera charging cable ArloSmart Hub SmartHub power adapter Ethernet cable Ultra Wire-Free Camera Rechargeable battery Mount Camera power adapter Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Industry Canada statement: This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Caution : (i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; (ii) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly indicated. Avertissement: (i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; (ii) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme à l’exigence de la p.i.r.e. applicable au masque d’élévation, énoncée à la section 6.2.2.3, doivent être clairement indiqués. Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé à plus de 20 cm entre le radiateur et votre corps.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 Date: 2020/02/26 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Arlo Technologies, Inc. _____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2APLE18300410 Product Description: arlo ULTRA Model: VMC5040 Sincerely, Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

SCS-F19: Confidentiality Request Letter Page 2 of 3 Rev 5.0 Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 Date: 2020/02/26 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2APLE18300410 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: Block Diagram Schematics Operational Description Software Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

SCS-F19: Confidentiality Request Letter Page 3 of 3 Rev 5.0 Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 Date: 2019/06/10 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: 2APLE18300410 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 █ days; or for a specified date of / / not to exceed 180 days from the Grant Date. See KDB 726920.. - e.g. User Manual - e.g. Internal Photos /External Photos - e.g. Test Setup photos - etc. - etc. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

     ဆဆငင
 စဉင 
ဓဆငငဒ!   "ဈငဒ$ဒဓင$ဇငဇဈ&'"ဓဆဉ$ဇဇထ$ဇထဆဈ

     
     ထဈဇဉ       ဆစငဈတ    ! " #      !ဆင20/02/26 
&!ဆ
)*+စဒဇငင410  
'( )   "" * (+ )  , (-.'/  0  / (  (+ 1'(  (  0(+  ) 1'(+ 2   ) / (  +)  1  3 4(    , "+ (2 +#  561'( + 7
       888888888888888888888888888888888888888888888888888888 Richard Hayley / R&D, Regulatory Compliance Manager Tel: 408-890-3034 Fax: 925-337-3724 E-mail: [email protected] 

Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 P O W E R O F A T T O R N E Y Date: 2020/02/26 FCC ID: 2APLE18300410 To whom it may concern: We, the undersigned, hereby authorize Amanda Wu of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all manners relating to FCC application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Amanda Wu of BV CPS Taoyuan on our behalf shall have the same effect as acts of our own. If you have any questions regarding the authorization, please don’t hesitate to Contact us. Thank you! Sincerely yours, Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 Date: March 19, 2020 Attestation FCC ID: 2APLE18300410 To Whom It May Concern: The initial application has been granted according to 47CFR Part 15 for FCC ID: 2APLE18300392; Granted on 11/07/2018 The new equipment to be Granted in this new application, according to FCC ID: 2APLE18300410 only differs from the initial version (FCC ID: 2APLE18300392) with the only following points The device has disabled the Bluetooth function, changed PCB layout of 2.4GHz portion, remove a Bluetooth/WLAN switch, add 2.4GHz WLAN FEM and changed relation components, the other as same (Please refer to the Internal Photos exhibits) This changes described above do not affect the WiFi_5G RF test item of the equipment, Consequently, the WiFi_5G test data retrieved from the initial application FCC ID: 2APLE18300392 can be re-used for the FCC ID: 2APLE18300410 equipment. However, based on our knowledge and our engineering judgment of the device design, the changes made, the format and amount of spot–check test data are decided as below: 1. Sample amount: 1 2. Spot–check rule part, frequency band and test items as below 3. Spot–check measurement result refer to the test report of FCC ID: 2APLE18300410 The associated 47 CFR Part 15 tests reports (initial & new versions) are described in the following table: Arlo Technologies, Inc. 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Tel: 408-890-3034/Fax: 925-337-3724 Date: March 19, 2020 FCC ID: 2APLE18300392 (initial) FCC ID: 2APLE18300410 (new) Spot check Test Item (one of worst mode) 47CFR Part 15E – RF WLAN 5G UNII 1/3 WLAN 5G UNII 2a/2c 47CFR Part 15E – RF WLAN 5G UNII 1/3 - All test data re-test WLAN 5G UNII 2a/2c - All test data re-test 1. Radiated Emission Test 2. Power Line Conducted Emission 3. Antenna Port Conducted Measurement We, Arlo Technologies, Inc. is taking full responsibility to re-test these test data for its new application FCC ID: 2APLE18300410 If you have any questions, feel free to contact us. Thank you. Sincerely yours, _________ Mike Campi / R&D, Regulatory Compliance Engineer Tel: 408-890-3015 Fax: 408-907-8167 E-mail: [email protected]

Reference No.: 191217E09-1 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 191217E09-1 Page 2 Reference No.: 191217E09-1 Page 3 Reference No.: 191217E09-1 Page 4 Reference No.: 191217E09-1 Page 5

(Fig. 1) FCC ID: 2APLE18300410 IC: 23815-18300410 FCC/IC LABEL LOCATION The label is permanent affixed in the battery compartment

Reference No.: 191217E09-2 Page 1 CONSTRUCTION PHOTOS OF EUT Reference No.: 191217E09-2 Page 2 Reference No.: 191217E09-2 Page 3 Reference No.: 191217E09-2 Page 4 Reference No.: 191217E09-2 Page 5 Reference No.: 191217E09-2 Page 6 Reference No.: 191217E09-2 Page 7 Reference No.: 191217E09-2 Page 8 Reference No.: 191217E09-2 Page 9 Reference No.: 191217E09-2 Page 10 Reference No.: 191217E09-2 Page 11 Reference No.: 191217E09-2 Page 12 Reference No.: 191217E09-2 Page 13 Reference No.: 191217E09-2 Page 14 Reference No.: 191217E09-2 Page 15 Reference No.: 191217E09-2 Page 16 Reference No.: 191217E09-2 Page 17

Report No.: SA180911E19D Page No. 1 / 6 Report Format Version: 6.1.1 Reference No.: 191217E09 RF Exposure Report Report No.: SA180911E19D FCC ID: 2APLE18300410 Test Model: VMC5040 Received Date: Sep. 11, 2018 Test Date: Feb. 12, 2020 Issued Date: Feb. 27, 2020 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA180911E19D Page No. 2 / 6 Report Format Version: 6.1.1 Reference No.: 191217E09 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Antenna Gain ...................................................................................................................................... 5 2.5 Calculation Result of Maximum Conducted Power ............................................................................. 6 Report No.: SA180911E19D Page No. 3 / 6 Report Format Version: 6.1.1 Reference No.: 191217E09 Release Control Record Issue No. Description Date Issued SA180911E19D Original release. Feb. 27, 2020 Report No.: SA180911E19D Page No. 4 / 6 Report Format Version: 6.1.1 Reference No.: 191217E09 1 Certificate of Conformity Product: arlo ULTRA Brand: Arlo Test Model: VMC5040 Sample Status: ENGINEERING SAMPLE Applicant: Arlo Technologies, Inc. Test Date: Feb. 12, 2020 Standards: FCC Part 2 (Section 2.1091) IEEE C95.1-1992 References Test Guidance: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Feb. 27, 2020 Claire Kuan / Specialist Approved by : , Date: Feb. 27, 2020 Clark Lin / Technical Manager Report No.: SA180911E19D Page No. 5 / 6 Report Format Version: 6.1.1 Reference No.: 191217E09 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Ca lculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Antenna Gain Antenna No Antenna Net Gain (dBi) Frequency range (GHz) Antenna Type Connector Type Left 1.3 2.4~2.4835 Monopole NA 3.4 5.15~5.85 Monopole NA Right 1.5 2.4~2.4835 Monopole NA 3.5 5.15~5.85 Monopole NA Report No.: SA180911E19D Page No. 6 / 6 Report Format Version: 6.1.1 Reference No.: 191217E09 2.5 Calculation Result of Maximum Conducted Power For WLAN 5GHz data was copied from the original test report (Report No.: SA180911E19) Operation Mode Evaluation Frequency (MHz) Max Power (mW) Anten…

Text truncated - open the document above for the full version.

Report No.: RF180911E19D-1 Page No. 1 / 37 Report Format Version:6.1.2 Reference No.: 191217E09 FCC Test Report (WLAN) (Spot Check) Report No.: RF180911E19D-1 FCC ID: 2APLE18300410 Original FCC ID: 2APLE18300392 Test Model: VMC5040 Received Date: Dec. 17, 2019 Test Date: Jan. 21 to Feb. 11, 2020 Issued Date: Feb. 27, 2020 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, United States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180911E19D-1 Page No. 2 / 37 Report Format Version:6.1.2 Reference No.: 191217E09 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT (WLAN) .................................................................................................. 6 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standard and References ............................................................... 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedure .................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 18 4.1.6 EUT Operating Condition .................................................................................................................. 19 4.1.7 Test Results ....................................................................................................................................... 20 4.2 Conducted Emission Measurement .................................................................................................. 28 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 28 4.2.2 Test Instruments ................................................................................................................................ 28 4.2.3 Test Procedure .............................................................…

Text truncated - open the document above for the full version.

Report No.: RF180911E19-1 Page No. 1 / 59 Report Format Version:6.1.2 FCC Test Report (WLAN) Report No.: RF180911E19-1 FCC ID: 2APLE18300392 Test Model: VMC5040 Received Date: Sep. 11, 2018 Test Date: Oct. 17 to 27, 2018 Issued Date: Nov. 01, 2018 Applicant: Arlo Technologies, Inc. Address: 2200 Faraday Ave. Suite 150, Carlsbad, CA 92008, Unites States Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / Designation Number: 723255 / TW2022 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF180911E19-1 Page No. 2 / 59 Report Format Version:6.1.2 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (WLAN) .................................................................................................. 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .............…

Text truncated - open the document above for the full version.