2APLE18300418Cellular and Battery Backup

Arlo Security Hub User Manual Protect and Connect. Table of Contents 1.0 Security Hub Onboarding Guide 3 2.0 Sensor Onboarding Guide 7 2.1 Sensor Onboarding Guide - Door 10 2.2 Sensor Onboarding Guide - Window 11 2.3 Sensor Onboarding Guide - Garage 12 2.4 Sensor Onboarding Guide - Motion 13 2.5 Sensor Onboarding Guide - Water Leak 15 3.0 Backup Battery Onboarding Guide 16 4.0 Federal Communication Commission Interference Statement 17 RF Exposure Statements: 17 Industry Canada Statement: 17 5.0 E-Label Process 18 Protect and Connect. 3 1 2 3 4 5 Troubleshooting From Step 4 If the Security Hub is unable to join the network. Factory reset by simutaneously pressing the ‘check’ and ‘x’ button on the Keypad until all LED button lights flash quickly. Continue the setup from Step 1 again. 1.0 Security Hub Onboarding Guide Step 1 On the bottom of the Security Hub, locate and scan the QR code. Step 2 Wait until only the ‘check’ button LED flashes before selecting ‘Continue’. Step 3 Press and hold the ‘check’ button until all LED button lights flash. Protect and Connect. 1.0 Security Hub Onboarding Guide Cont’d 4 8 9 10 11 Step 6 In the type field, enter the password of the selected Wi-Fi network. Step 8 Name and ensure the location of the Security Hub is correct. Step 9 If updates are available, Security Hub will be directed to Step 10 and 11. Step 11 The Security Hub has the latest firmware, and setup can be continued. Troubleshooting From Step 7 If the Security Hub does not connect to the selected Wi-Fi network, check the status of your Wi-Fi network and select ‘Try Again’. If the problem persists, select ‘Need Help?’. 7 6 Protect and Connect. 1.0 Security Hub Onboarding Guide Cont’d 5 Troubleshooting From Step 12 Verify that the Security PIN entered matches the first Security PIN that was entered. Set the Security PIN again from Step 12 if the problem persists. 14 15 Step 12 Create a memorable Security PIN and enter it into the type field. Step 13 After PIN is correctly re-entered, give your Security PIN a name. Step 14 S Arm Away by pressing the ‘Arm Away’ button. Select ‘Continue’ to Step 15 Set Arm Home by pressing the ‘Arm Home’ button and entering the Security 13 12 Troubleshooting From Step 10 If the Security Hub is unable to update the firmware, ensure the Security Hub is plugged in properly and select ‘Try Again’. Protect and Connect. 1.0 Security Hub Onboarding Guide Cont’d 6 Troubleshooting From Step 17 If the Security PIN entered is incorrect. Repeat the Step 17 again ensuring the correct Security PIN is entered. 18 19 Step 16 Set Disarm by pressing the ‘Disarm’ button and entering the Security PIN. Step 17 Activate Panic by pressing and holding the ‘Panic’ button. To exit Panic mode press the ‘Disarm’ button, enter the Security PIN, and press the ‘check’ button. Step 18 If previous Arlo Devices are part of your Security System, they will appear below. New devices can be setup by selecting ‘Add Another Device’. Troubleshooting From Step 15 If the Security PIN entered is incorrect. Repeat the Step 15 again ensuring the correct Security PIN is entered. 17 16 7 Protect and Connect. 1 2 Troubleshooting From Step 2 If the Security Hub is offline, check the status of your Wi-Fi network and ensure the hub is plugged in correctly. 3 Troubleshooting From Step 3 If the Security Hub has not previously been set to disarm. Select the Disarm button and wait until completed. 2.0 Sensor Onboarding Guide Step 1 If an Security Hub is not connected, follow the instructions from 1.0 to onboard the Security Hub. Step 2 Select the All-In-One Sensor and have your Sensor ready. Protect and Connect. 2.0 Sensor Onboarding Guide Cont’d 8 Step 4 Select one of the following: Open/Close Detection (2.1-2.3), Motion Detection (2.4), or Water Leak Detection (2.5) Step 5 Following the arrows in the side of the Sensor, slide off the front cover Troubleshooting From Step 8 If the blue LED does not flash on the Sensor, select ‘The LED isn’t flashing blue.’ Press the sync button on the bottom of the Sensor, then process ‘Continue’ to proceed. Step 8 Wait until the blue LED flashes on the front of the Sensor, then press ‘Continue’ to proceed. 7 6 5 4 8 9 Protect and Connect. 2.0 Sensor Onboarding Guide Cont’d 9 11 12 13 14 Step 10 If done correctly, the Sensor has been found by the Security Hub and the following screen will display. Step 13 Select one of the following: Door (2.1), Window (2.2), or Garage (2.3) Step 14 Within your Arlo Security Hub package, have the Magnet and blue adhesive ready. Troubleshooting From Step 9 If the Security Hub is unable to find the Sensor, select either ‘Try Again’ or ‘Need Help?’ and select the sync button on the bottom of the sensor. 10 Protect and Connect. correct or ‘Need help?’ if it is incorrect. 10 1 2 3 4 5 6 2.1 Sensor Onboarding Guide - Door Step 1 Ensure both the Sensor and Magnet are vertical and aligned ½ inch or 12 mm between one another. Step 3 With the Sensor and Magnet properly aligned, place onto a door frame. Step 5 & 6 Open and Close the door to verify if the status is accurate. Select ‘Continue if it is Protect and Connect. 5 6 7 8 Step 7 & 8 Open and Close the window to verify if the status is accurate. Select ‘Continue if it is correct or ‘Need help?’ if it is incorrect. 11 1 2 3 4 2.2 Sensor Onboarding Guide - Window Step 1 Ensure both the Sensor and Magnet are vertical and aligned ½ inch or 12 mm between one another. Step 3 & 4 Place the Sensor (and Magnet) on the frame of a tilting window. Protect and Connect. 5 6 7 8 Step 7 & 8 Open and Close the window to verify if the status is accurate. Select ‘Continue if it is correct or ‘Need help?’ if it is incorrect. 12 1 2 3 4 2.3 Sensor Onboarding Guide - Garage Step 1 Ensure both the Sensor and Magnet are vertical and aligned ½ inch or 12 mm between one another. Step 3 & 4 Place the Sensor (and Magnet) on the frame of a garage. Protect and Connect. 13 1 2 3 4 5 6 7 8 2.4 Sensor Onboarding Guide - Motion Step 1 Find a…

Text truncated - open the document above for the full version.

Arlo Technologies Inc 2200 Faraday Avenue, Suite 150, Carlsbad, CA 92008, USA Date: 2022/05/19 FCC ID: 2APLE18300418 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize Underwriters Laboratories Taiwan Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Underwriters Laboratories Taiwan Co., Ltd. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing Underwriters Laboratories Taiwan Co., Ltd. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) Make claims regarding certification only in respect of the scope for which certification has been granted; d) Do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) Upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) Use certification only to indicate the products are certified as being in conformity with specified standards; DocuSign Envelope ID: 0FF94641-9BAE-4B91-834B-EAB8BDB24746 g) Endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) Document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Name/Title: Douglas Leong / VP of Quality & Compliance Company Name: Arlo Technologies Inc Address: 2200 Faraday Avenue, Suite 150, Carlsbad, CA 92008, USA Tel: 4088903900 Fax: 4089078167 Email: [email protected] DocuSign Envelope ID: 0FF94641-9BAE-4B91-834B-EAB8BDB24746

v1.0 Arlo Technologies Inc 2200 Faraday Avenue, Suite 150, Carlsbad, CA 92008, USA Date: Jul. 1, 2022 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd. Columbia MD 21046 Subject: Request for Confidentiality FCC ID : 2APLE18300418 To whom it may concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Permanent Confidentiality  Schematics Diagrams  Block Diagram  Operation Description  BOM Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. DocuSign Envelope ID: 335B0E3E-4A62-42AA-A7F8-E055356FB749 v1.0 Short Term Confidentiality In addition to the above mentioned documents, pursuant to Public Notice DA 04-1705 of the commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requests that the commission to grant short-term confidentiality request on the following attachments for 180day.  External Photo  Internal Photo  Test Setup Photo  User Manual It is our understanding that measurement test reports and FCC ID label format cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Name/Title: Douglas Leong / VP of Quality & Compliance Company Name: Arlo Technologies Inc Address: 2200 Faraday Avenue, Suite 150, Carlsbad, CA 92008, USA Tel: 4089078000 Fax: 4089078167 Email: [email protected] DocuSign Envelope ID: 335B0E3E-4A62-42AA-A7F8-E055356FB749

Test report No. : 4790218737-EP Page : 1 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Product Photos External Photos Group Pic 1 Test report No. : 4790218737-EP Page : 2 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Outview: LBB1001 Pic 1 Outview: LBB1001 Pic 2 Test report No. : 4790218737-EP Page : 3 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Outview: LBB1001 Pic 3 Outview: LBB1001 Pic 4 Test report No. : 4790218737-EP Page : 4 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Outview: LBB1001 Pic 5 Outview: LBB1001 Pic 6 Test report No. : 4790218737-EP Page : 5 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Outview: LBB1001 Pic 7 Outview: LBB1001 Pic 8 Test report No. : 4790218737-EP Page : 6 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Accessory: A-15 (P/N: 308-50033-01) Pic 1 Accessory: A-15 (P/N: 308-50033-01) Pic 2 Test report No. : 4790218737-EP Page : 7 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Accessory: A-15 (P/N: 308-50033-01) Pic 3 Accessory: A-15 (P/N: 308-50033-01) Pic 4 Test report No. : 4790218737-EP Page : 8 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Accessory: A-15 (P/N: 308-50033-01) Pic 5 Accessory: A-15 (P/N: 308-50033-01) Pic 6 Test report No. : 4790218737-EP Page : 9 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Accessory: A-15 (P/N: 308-50033-01) Pic 7 Test report No. : 4790218737-EP Page : 10 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Accessory: A-15 (P/N: 308-50036-01) Pic 1 Accessory: A-15 (P/N: 308-50036-01) Pic 2 Test report No. : 4790218737-EP Page : 11 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Accessory: A-15 (P/N: 308-50036-01) Pic 3 Accessory: A-15 (P/N: 308-50036-01) Pic 4 Test report No. : 4790218737-EP Page : 12 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Accessory: A-15 (P/N: 308-50036-01) Pic 5 Accessory: A-15 (P/N: 308-50036-01) Pic 6 Test report No. : 4790218737-EP Page : 13 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Accessory: A-15 (P/N: 308-50036-01) Pic 7

XXXXXXXXXXXXX XXXXXXXXXXXXX Made in Vietnam 272-50108-01 S N I M E I The device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAN ICES-003(B)/NMB-003(B) IC: 23815-18300418 FCC ID: 2APLE18300418

Test report No. : 4790218737-EP Page : 14 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 Internal Photos LBB1001 Pic 1 LBB1001 Pic 2 Test report No. : 4790218737-EP Page : 15 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 LBB1001 Pic 3 LBB1001 Pic 4 Test report No. : 4790218737-EP Page : 16 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 LBB1001 Pic 5 LBB1001 Pic 6 Test report No. : 4790218737-EP Page : 17 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 LBB1001 Pic 7 LBB1001 Pic 8 Test report No. : 4790218737-EP Page : 18 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 LBB1001 Pic 9 LBB1001 Pic 10 Test report No. : 4790218737-EP Page : 19 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 LBB1001 Pic 11 LBB1001 Pic 12 Test report No. : 4790218737-EP Page : 20 of 20 Issued date : Jun. 20, 2022 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX ) :+886-3-583-7948 LBB1001 Pic 13

MPE TEST REPORT Applicant Quectel Wireless Solutions Co., Ltd FCC ID XMR2020BG95M2 Product LTE Cat M1 & Cat NB2 Module Brand Quectel Marketing Quectel BG95-M2 Model BG95-M2 Report No. R1907A0448-M1V1 Issue Date May 9, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in FCC 47 CFR Part 1 1.1310. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Performed by: Yu Wang Approved by: Guangchang Fan TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86-021-50791141/2/3 FAX: +86-021-50791141/2/3-8000 MPE Test Report Report No.: R1907A0448‐M1V1 TA Technology (Shanghai) Co., Ltd. Page 2 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Table of Contents 1 Test Laboratory ............................................................................................................................... 3 1.1 Notes of the Test Report ......................................................................................................... 3 1.2 Test facility .............................................................................................................................. 3 1.3 Testing Location ...................................................................................................................... 4 1.4 Laboratory Environment .......................................................................................................... 4 2 Description of Equipment under Test .............................................................................................. 5 3 Maximum conducted output power (measured) and antenna Gain ................................................ 6 4 Test Result ..................................................................................................................................... 7 MPE Test Report Report No.: R1907A0448‐M1V1 TA Technology (Shanghai) Co., Ltd. Page 3 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1 Test Laboratory 1.1 Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. 1.2 Test facility FCC(Designation number: CN1179, Test Firm Registration Number: 446626) TA Technology (Shanghai) Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. A2LA(Certificate Number: 3857.01) TA Technology (Shanghai) Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. MPE Test Report Report No.: R1907A0448‐M1V1 TA Technology (Shanghai) Co., Ltd. Page 4 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1.3 Testing Location Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, TangzhenIndustryPark, Pudong Shanghai, China City: Shanghai Post code: 201201 Country: P. R. China Contact: Fan Guangchang Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] 1.4 Laboratory Environment Temperature Min. = 18C, Max. = 25 C Relative humidity Min. = 30%, Max. = 70% Ground system resistance < 0.5  Ambient noise is checked and found very low and in compliance with requirement of standards. Reflection of surrounding objects is minimized and in compliance with requirement of standards. MPE Test Report Report No.: R1907A0448‐M1V1 TA Technology (Shanghai) Co., Ltd. Page 5 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2 Description of Equipment under Test Client Information Applicant Quectel Wireless Solutions Co., Ltd Applicant address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 Manufacturer Quectel Wireless Solutions Co., Ltd Manufacturer address Building 5, Shanghai Business Park Phase III (Area B), No.1016 Tianlin Road, Minhang District, Shanghai, China 200233 General Technologies Model BG95-M2 IMEI 863859040012143 Hardware Version R2.1 Software Version BG95M2LAR02A04 Date of Testing: August 20, 2019 ~ September 5, 2019& December 25, 2019 ~ January 8, 2020 Note: This revised report (Report No.: R1907A0448-M1V1) supersedes and replaces the previously issued report (Report No.: R1907A0448-M1). Please discard or destroy the previously issued report and dispose of it accordingly. BG95-M2 (Report No.: R1907A0448-M1V1) is a variant model of BG95-M3 (Report No.: R1907A0446-M1). Test values duplicated from Original for variant. There is no test for variant in this report. The detailed product change description please refers to the Statement letter_BG95-M3&BG95-M2. MPE Test Report Report No.: R1907A0448‐M1V1 TA Technology (Shanghai) Co., Ltd. Page 6 of 10 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 3 Maximum conducted output power (measured) and antenna Gain The numeric gain (G) of the antenna with a gain specified in dB is determined by Numeric gain (G)=10^(antenna gain/10) Band Maximum Conducted Output Power(dBm) (dBm) (mW) LTE Band 2 22.000 158.489 LTE Band 4 22.000 158.489 LTE Band 5 22.000 158.489 LTE Band 12 22.000 158.489 …

Text truncated - open the document above for the full version.

Test report No. : 4790218737-US-R3-V0 Page : 1 of 10 Issued date : 2022/7/4 FCC ID : 2APLE18300418 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: 17-EM-F0864 / 5.0 Maximum Permissible Exposure Report Product : Cellular and Battery Backup Model Name : LBB1001 FCC ID : 2APLE18300418 Test Regulation : 47 CFR FCC Part 2.1091 Received Date : 2022/3/31 Test Date : 2022/4/6 ~ 2022/4/12 Issued Date : 2022/7/4 Applicant : Arlo Technologies Inc 2200 Faraday Avenue, Suite 150, Carlsbad, CA 92008, USA Issued By : Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report are responsible of the test sample(s) provided by the client only and are not to be used to indicate applicability to other similar products. Test report No. : 4790218737-US-R3-V0 Page : 2 of 10 Issued date : 2022/7/4 FCC ID : 2APLE18300418 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: 17-EM-F0864 / 5.0 REVISION HISTORY Original Test Report No.: 4790218737-US-R3-V0 Rev. Test report No. Date Page revised Contents Original 4790218737-US-R3-V0 2022/7/4 - Initial issue Test report No. : 4790218737-US-R3-V0 Page : 3 of 10 Issued date : 2022/7/4 FCC ID : 2APLE18300418 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: 17-EM-F0864 / 5.0 Table of Contents 1. Attestation of Test Results ......................................................................................... 4 2. Test Methodology and Reference Procedures ......................................................... 5 3. Facilities and Accreditation ...................................................................................... 5 4. Equipment Under Test .............................................................................................. 6 4.1. Description of EUT .............................................................................................. 6 4.2. Description of Available Antennas ...................................................................... 8 5. Requirement ............................................................................................................... 9 6. Radio Frequency Radiation Exposure Evaluation ............................................... 10 Test report No. : 4790218737-US-R3-V0 Page : 4 of 10 Issued date : 2022/7/4 FCC ID : 2APLE18300418 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: 17-EM-F0864 / 5.0 1. Attestation of Test Results APPLICANT: Arlo Technologies Inc 2200 Faraday Avenue, Suite 150, Carlsbad, CA 92008, USA MANUFACTURER: Funing Precision Component Co., Ltd. Lot B, Que Vo Industrial Zone, Van Duong Ward, Bac Ninh City, Bac Ninh Province, Vietnam EUT DESCRIPTION: Cellular and Battery Backup BRAND: Arlo MODEL: LBB1001 SAMPLE STAGE: Engineering Verification Test sample APPLICABLE STANDARDS STANDARD Test Results 47 CFR FCC PART 2.1091 PASS Underwriters Laboratories Taiwan Co., Ltd. tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by Underwriters Laboratories Taiwan Co., Ltd. based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by Underwriters Laboratories Taiwan Co., Ltd. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Underwriters Laboratories Taiwan Co., Ltd. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Prepared By: Approved By: Cindy Hsin Date : 2022/7/4 Kent Liu Date : 2022/7/4 Project Handler Senior Laboratory Engineer Test report No. : 4790218737-US-R3-V0 Page : 5 of 10 Issued date : 2022/7/4 FCC ID : 2APLE18300418 Underwriters Laboratories Taiwan Co., Ltd. Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Telephone :+886-2-7737-3000 Facsimile (FAX) :+886-3-583-7948 Doc No: 17-EM-F0864 / 5.0 2. Test Methodology and Reference Procedures The tests documented in this report were performed in accordance with KDB 447498 D01 General RF Exposure Guidance v06. 3. Facilities and Accreditation Test Location Underwriters Laboratories Taiwan Co., Ltd. Address Building B and Building E, No. 372-7, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County, Taiwan Accreditation Certificate Underwriters Laboratories Taiwan Co.,…

Text truncated - open the document above for the full version.