2APMJA55Mobile Phone

A55 user manual WELCOME  Congratulations on the purchase of your A80S  Mobile phone. Your phone provides many functions which are practical for daily use, such as a hands-free，loudspeaker, camera, MP3 player and ultra clear video  You can read the manual to understand how to use your A80S mobile phone and experience the well-established functions and simple operation method. Please use the original accessories in order to achieve the best use of your device. A80S shall not be responsible for any damage in the machinery due to use of non-original accessories. User precautions Before using your A80S handset, it is important that you read the following recommendations: • Minimize exposing your phone to water and any other liquid. Keep your phone dry and avoid humid spaces. • Use only authorized accessories • Do not try to open your phone. • If the phone or any accessory is not working properly, take it to a qualified service center. • The use headphones or earphones for a prolonged time (at high volume) may cause serious damage to your hearing. • Do not use the phone while charging. • In extreme heat or cold: avoid temperatures below -10 ° C / 14 ° F or above 40 ° C / 104 ° F. YOUR PHONE FUNCTIONS CHARGE THE BATTERY Connect this end to phone’s USB port. Tip: Charge the battery before using it for the first time. Use only A80S approved chargers, batteries and cables. TURNING THE PHONE ON & OFF Sub Camera Power Volume Flash lamp Fingerprint Main Camera Custom key function Receiver Hold down the power button to turn the phone on. DIM, LOCK & WAKING THE PHONE When the power is on and you want to dim the screen, press the power button. When the screen is dimmed and you want to wake the phone, press the power button and slide your finger from middle to right. HOME SCREEN Touch it to enter app tray. APPS Touch an app tolaunch it STATUS BAR The status bar shows your phone’s status and notifications. (Notifications are described on the next page.) Notification icons Status icons Status icons The following status icons may appear on your screen: Icon Statement Icon Statement SIM Network signal level Headset is inserted Indicates battery capacity Bluetooth is activated Unread messages Wi-Fi is connected Missed calls Airplane mode is activated Alarm is activated USB is connected NOTIFICATION PANEL The notification panel is your center for new events: like new e-mail, voicemail, updates, and more. Drag down to display notifications. Touch a notification to respond MAKE & ANSWER A CALL 1. From the Home screen, touch 2. Dial a number, then touch to initiate the call. Answer a call Drag to the right Decline a call Drag to the left VOLUME CONTROL WHEN CALLING Volume key is at the left side of the phone. During a conversation, you can press the volume key to tune the sound volume. SEND A TEXT 1. From the Home screen, touch 2. Touch 3. Touch the “To” field, then enter a recipient. 4. Touch the Type message field, then enter a message 5. TouchSend the message ADDING EMAIL ACCOUNTS The first time you open Email, you will be prompted to set up an email account. After that, you can configure Email to send and receive email from additional accounts. To add an email account: 1) Tap the e-mail icon. In Your account interface, tap Next. In e-mail address option, enter your e-mail address. In password option, → enter your e-mail password. Tap Next. 2) Filling the email address and password, tap next to setup email 3) Tap next to enter your email. SETTINGS The settings for various features of the phone Get to know the settings on your phone so that you can personalize them to your own requirements. Go to Settings to configure how your phone looks, sounds, communication, privacy, and operations in a variety of ways: Wi-Fi You can use Wireless & Network settings to manage your SIM card, configure and manage connections to networks and devices by using Wi-Fi. You can set Bluetooth, data usage, airplane mode, VPN, tethering & portable hotspot and mobile networks in this interface. Bluetooth Press the switch to power on Bluetooth. Once on, the Bluetooth will automatically scan for any nearby open equipment. SIM cards Press the switch to power on SIM cards. When insert two cards, click to set cellular data、Calls、SMS messages. More  Airplane Mode  Tethering, Portable Hotspot VPN. Display You can set Wallpaper, Auto-rotate screen, Brightness, Daydream, wireless display, Sleep and Font size in this interface. Notification Control all apps notification messages. Sound This option sets the phone ring tone settings for receiving calls and notifications. Gesture Settings • Finger Gesture. • Gesture Motion • Smart Motion Apps You can use the Applications settings to view details about the applications installed on your phone, to manage their data and force them to stop, to view and control services that are currently running, and to view the storage used by applications, etc. Storage Use the Storage settings to monitor the used and available space on your phone and on your SD card and to manage your SD card. Battery You can view your battery status, battery level and battery use in this interface. Memory View average Memory usage. Users You can add and switch users DuraSpeed DuraSpeed helps boots the foreground APP by retricting background APPs Location You can turn on Wi-Fi & mobile network location, GPS satellites, etc through this function. Security You can set the parameters related to security through this function. Accounts You should add an account first before using this function. Google  Location information  Security  Advertising  Search and Instant Language & input Use the Language & Keyboard settings to select the language for the text on your phone and for configuring the input method. Backup & reset You can backup your data and reset your phone in this interface. Data & time You can use Date & Time settings to set your preferences for how dates are displayed. You can also use these settings to set your own tim…

Text truncated - open the document above for the full version.

Shenzhen DOKE Electronic Co., Ltd Agent Authorization Letter (2022-04-19) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.li [email protected] to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Aiting Yin / Manager Date/City: 2022-04-19 / Shenzhen Phone: 18124004099 Fax: 0755-6668278 E-mail: [email protected]

Shenzhen DOKE Electronic Co., Ltd Family models difference declaration Mobile Phone Model: A55, A80, A80S, A80Plus, A95, A55Pro, A85, C30, C80 Difference declaration: All models are the same circuit, RF module, motherboard and antenna, only appearance, color and model name are different Regards, Signature Aiting Yin / Manager Date/City: 2022-04-19 / Shenzhen Phone: 18124004099 Fax: 0755-6668278 E-mail: [email protected]

Shenzhen DOKE Electronic Co., Ltd Long Term Confidentiality Request Letter (2022-04-19) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: Mobile Phone Model No.: A55, A80, A80S, A80Plus, A95, A55Pro, A85, C30, C80 FCC ID: 2APMJA55 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the  Schematic Diagram  Block Diagram  Operational Description  Parts List  Tune Up Procedure  Software Security Requirements for UNII devices Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, Aiting Yin / Manager Date/City: 2022-04-19 / Shenzhen Phone: 18124004099 Fax: 0755-6668278 E-mail: [email protected]

Shenzhen DOKE Electronic Co., Ltd Short Term Confidentiality Request Letter (2022-04-19) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Product: Mobile Phone Model No.: A55, A80, A80S, A80Plus, A95, A55Pro, A85, C30, C80 FCC ID: 2APMJA55 To Whom It May Concern: In accordance with sections 0.457 and 0.459 of CFR 47, <Shenzhen DOKE Electronic Co., Ltd>. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos Internal photos User’s manual These documents contain detailed system and equipment descriptions and related information about the product, which <Shenzhen DOKE Electronic Co., Ltd> considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, <Shenzhen DOKE Electronic Co., Ltd> feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Aiting Yin / Manager Date/City: 2022-04-19/Shenzhen Phone: 18124004099 Fax: 0755-6668278 E-mail: [email protected]

STR220224005 Model: A55 Photo 1 Photo 2 STR220224005 Model: A55 Photo 3 Photo 4 STR220224005 Model: A55 Photo 5 Photo 6 STR220224005 Model: A55 Photo 7 Photo 8 STR220224005 Model: A55 Photo 9 Photo 10

Label&Location

STR220224005 Model: A55 Photo 1 Photo 2 BT/Wi-Fi ANT GSM / WCDMA / LTE Main ANT LTE Div ANT STR220224005 Model: A55 Photo 3 Photo 4 STR220224005 Model: A55 Photo 5 Photo 6 STR220224005 Model: A55 Photo 7 Photo 8 STR220224005 Model: A55 Photo 9 Photo 10 STR220224005 Model: A55 Photo 11 Photo 12 STR220224005 Model: A55 Photo 13

Report No.: STR220224005002E Version.1.3 Page 1 of 58 RADIO TEST REPORT FCC ID: 2APMJA55 Product: Mobile Phone Trade Mark: Blackview Model No.: A55 Family Model: A80,A80S,A80Plus,A95,A55Pro,A85, C30,C80 Report No.: STR220224005002E Issue Date: Apr 12 . 2022 Prepared for Shenzhen DOKE Electronic Co., Ltd 13th Floor, Weidonglong commercial building B, Meilong avenue, Longhua New District, Shenzhen, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: STR220224005002E Version.1.3 Page 2 of 58 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ........................................................................................................... 9 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ....................................................................... 9 6.2 SUPPORT EQUIPMENT............................................................................................................................... 10 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 11 7 TEST REQUIREMENTS .................................................................................................................................... 13 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 13 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 16 7.3 6DB BANDWIDTH ....................................................................................................................................... 25 7.4 DUTY CYCLE ............................................................................................................................................... 26 7.5 PEAK OUTPUT POWER .............................................................................................................................. 28 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 29 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 31 7.8 SPURIOUS RF CONDUCTED EMISSIONS................................................................................................ 32 7.9 ANTENNA APPLICATION .......................................................................................................................... 33 8 TEST RESULTS ................................................................................................................................................... 34 8.1 1M .................................................................................................................................................................. 34 8.2 2M .................................................................................................................................................................. 47 Report No.: STR220224005002E Version.1.3 Page 3 of 58 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Shenzhen DOKE Electronic Co., Ltd Address ....................................... : 13th Floor, Weidonglong commercial building B, Meilong avenue, Longhua New District, Shenzhen, China Manufacturer's Name .................. : Shenzhen DOKE Electronic Co.,Ltd Address ....................................... : 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China Product description Product name .............................. : Mobile Phone Model and/or type reference ...... : A55 Family Model ............................... : A80,A80S,A80Plus,A95,A55Pro,A85,C30,C80 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. The test results of this report relate …

Text truncated - open the document above for the full version.

Report No.: STR220224005003E Version.1.3 Page 1 of 74 FCC RADIO TEST REPORT FCC ID: 2APMJA55 Product: Mobile Phone Trade Mark: Blackview Model No.: A55 Family Model: A80,A80S,A80Plus,A95,A55Pro,A85, C30,C80 Report No.: STR220224005003E Issue Date: Apr 12 . 2022 Prepared for Shenzhen DOKE Electronic Co., Ltd 13th Floor, Weidonglong commercial building B, Meilong avenue, Longhua New District, Shenzhen, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090Website:http://www.ntek.org.cn Report No.: STR220224005003E Version.1.3 Page 2 of 74 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 3 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 4 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 5 3.1 FACILITIES..................................................................................................................................................... 5 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 5 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 5 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 6 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 8 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.3 6DB BANDWIDTH ....................................................................................................................................... 27 7.4 DUTY CYCLE ............................................................................................................................................... 29 7.5 MAXIMUM OUTPUT POWER .................................................................................................................... 30 7.6 POWER SPECTRAL DENSITY ................................................................................................................... 32 7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 34 7.8 SPURIOUS RF CONDUCTED EMISSIONS................................................................................................ 36 7.9 ANTENNA APPLICATION .......................................................................................................................... 37 8 TEST RESULTS ................................................................................................................................................... 38 8.1 MAXIMUM CONDUCTED OUTPUT POWER ....................................................................................................... 38 8.2 OCCUPIED CHANNEL BANDWIDTH .................................................................................................................. 39 8.3 MAXIMUM POWER SPECTRAL DENSITY LEVEL ............................................................................................... 46 8.4 BAND EDGE .................................................................................................................................................... 53 8.5 CONDUCTED RF SPURIOUS EMISSION ............................................................................................................. 62 Report No.: STR220224005003E Version.1.3 Page 3 of 74 1 TEST RESULT CERTIFICATION Applicant’s name ......................... : Shenzhen DOKE Electronic Co., Ltd Address ....................................... : 13th Floor, Weidonglong commercial building B, Meilong avenue, Longhua New District, Shenzhen, China Manufacturer's Name .................. : Shenzhen DOKE Electronic Co.,Ltd Address ....................................... : 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China Product description Product name .............................. : Mobile Phone Model and/or type reference ..... : A55 Family Model ............................... : A80,A80S,A80Plus,A95,A55Pro,A85,C30,C80 Measurement Procedure Used: APPLICABLE STANDARDS APPLICABLE STANDARD/ TEST PROCEDURE TEST RESULT FCC 47 CFR Part 2, Subpart J FCC 47 CFR Part 15, Subpart C ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Complied This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And …

Text truncated - open the document above for the full version.

Page 1 of 228 Report No.: STR220224005008E FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： Mobile Phone Brand Name： Blackview Model Name： A55 Family Model： A80,A80S,A80Plus,A95,A55Pro,A85, C30,C80 Report No.： STR220224005008E FCC ID： 2APMJA55 Prepared for Shenzhen DOKE Electronic Co., Ltd 13th Floor, Weidonglong commercial building B, Meilong avenue, Longhua New District, Shenzhen, China. Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 228 Report No.: STR220224005008E TEST RESULT CERTIFICATION Applicant’s name ................. : Shenzhen DOKE Electronic Co., Ltd Address .................................. : 13th Floor, Weidonglong commercial building B, Meilong avenue, Longhua New District, Shenzhen, China. Manufacturer's Name ........... : Shenzhen DOKE Electronic Co.,Ltd Address .................................. : 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China. Product description Product name ......................... : Mobile Phone Brand Name ......................... : Blackview Model and/or type reference . : A55 Family Model .......................... : A80,A80S,A80Plus,A95,A55Pro,A85,C30,C80 Standards ............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Date of Test Date (s) of performance of tests ............. : Mar. 02, 2022 ~ Mar. 14, 2022 Date of Issue .......................................... : Apr. 13, 2022 Test Result .............................................. : Pass Prepared By (Test Engineer) : (Jacob Chen) Approved By (Lab Manager) : (Alex Li) Page 3 of 228 Report No.: STR220224005008E ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Apr. 13, 2022 Jacob Chen Page 4 of 228 Report No.: STR220224005008E TABLE OF CONTENTS 1. General Information .......................................................................................... 6 1.1. RF exposure limits .................................................................................. 6 1.2. Statement of Compliance ....................................................................... 7 1.3. EUT Description ..................................................................................... 7 1.4. Test specification(s) ................................................................................ 9 1.5. Ambient Condition ................................................................................. 9 2. SAR Measurement System ............................................................................... 10 2.1. SATIMO SAR Measurement Set-up Diagram ......................................... 10 2.2. Robot ................................................................................................... 11 2.3. E-Field Probe ........................................................................................ 12 2.3.1. E-Field Probe Calibration ................................................................ 12 2.4. SAM phantoms .................................................................................... 13 2.4.1. Technical Data ................................................................................ 14 2.5. Device Holder ...................................................................................... 15 2.6. Test Equipment List .............................................................................. 16 3. SAR Measurement Procedures ........................................................................ 18 3.1. Power Reference.................................................................................. 18 3.2. Area scan & Zoom scan ........................................................................ 18 3.3. Description of interpolation/extrapolation scheme ............................. 20 3.4. Volumetric Scan ................................................................................... 20 3.5. Power Drift .......................................................................................... 20 4. System Verification Procedure ......................................................................... 21 4.1. Tissue Verification ................................................................................ 21 4.1.1. Tissue Dielectric Parameter Check Results ..................................... 22 4.2. System Verification Procedure ............................................................. 23 4.2.1. System Verification Results ............................................................ 24 5. SAR Measurement variability and uncertainty ................................................. 25 5.1. SAR measurement variability ............................................................... 25 5.2. SAR measurement uncertainty .............................................................…

Text truncated - open the document above for the full version.

Page 121 of 228 Report No.: STR220224005008E Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.2372 0.1516 0.0841 0.0482 0.0291 0.0202 0.0166 3D screen shot Hot spot position Page 122 of 228 Report No.: STR220224005008E MEASUREMENT 17 Date of measurement: 10/3/2022 A. Experimental conditions. Area Scan dx=15mm dy=15mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom Left head Device Position Cheek Band LTE band 2 Channels Middle Signal LTE (Crest factor: 1.0) B. SAR Measurement Results Frequency (MHz) 1880.000000 Relative permittivity (real part) 38.528633 Relative permittivity (imaginary part) 13.883346 Conductivity (S/m) 1.450038 Variation (%) -4.080000 SURFACE SAR VOLUME SAR Maximum location: X=-52.00, Y=-51.00 SAR Peak: 0.18 W/kg SAR 10g (W/Kg) 0.080451 SAR 1g (W/Kg) 0.128405 Page 123 of 228 Report No.: STR220224005008E Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 0.1756 0.1315 0.0925 0.0640 0.0437 0.0383 0.0250 3D screen shot Hot spot position Page 124 of 228 Report No.: STR220224005008E MEASUREMENT 18 Date of measurement: 10/3/2022 A. Experimental conditions. Area Scan dx=15mm dy=15mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm Phantom…

Text truncated - open the document above for the full version.