2APN5SNZB-03Motion Sensor

SNZB-03 User manual V 1.0 Motion Sensor 中文-------1-6 English-------7-12 取出电池绝缘片 使用说明 eWeLink eWeLink 1. 下载APP 本设备需要连接SONOFF ZigBee网关进行智 能操作，可与其他产品互联互通。 设备支持其它同类型的网关，具体以实际产品为 准。 > 1 > ZBBridge 已添加设备:0 暂无子设备，请添加 添加 打开eWeLink APP，选择要连接的网关，点 击 "添加" 子设备，然后长按设备重置按钮5秒 直至LED指示灯闪烁3下，设备进入配对状态， 等待设备连接。 2. 添加子设备 添加子设备前，请先连接网关。 2 注意：如添加失败，请将设备移近网关后再重新 添加。 SONOFF网关支持同时连接多个子 设备 ZBBridge 已添加设备:0 暂无子设备，请添加 添加 添加设备 正在连接 请让设备尽量靠近网关 25s 找到设备 3个设备 已找到 > 先打开eWeLink APP网关页面，点击添加， 然后设置让所需配对的子设备进入配对状态， 等待设备连接。 3 安装方法 方法1：直接放置桌面使用。 注意：请勿安装在金属表面，否则会影响无线通讯 距离。 方法2：撕下3M胶保护膜，粘贴在所需区域即可 4 产品参数 产品型号: SNZB-03 电池型号: CR2450 工作电压: 3V 无线协议: ZigBee (IEEE 802.15.4) 工作温度: -10-40°C 工作湿度:10-90%RH(无冷凝) 外壳材料: PC 产品规格: 40x35x28mm 产品介绍 重置按键 LED指示灯 5 产品特点 SNZB-03是一款低功耗的运动传感器，可实 时感应当环境是否有移动物体，通过添加场 景联动设置控制其他设备。 低功耗 电量低消息推送 场景联动 移动感应 删除子设备 长按子设备重置按钮5秒直到LED指示灯闪烁3 下，此时子设备已在网关中删除。 提醒：用户还可在APP子设备界面中删除子设备。 6 Operation instruction Pull out the battery insulation sheet eWeLink eWeLink 1. Download APP The device can be operated intelligently via working with the SONOFF ZigBee Bridge to communicate with other devices. The device can work with other gateways supporting ZigBee 3.0 wireless protocol. Detailed information is in accordance with the final product. > 7 2. Add sub-devices > ZBBridge Added:0 No child device,please add. Add Connect the Bridge before adding the sub-device Access eWeLink APP, select the Bridge that you want to connect, and tap “Add” to add a sub-device. Then long press reset button on the device for 5s until the LED indicator flashes three times, which means the device has entered the pairing mode, and be patient until pairing completes. If the addition failed, move the sub-device closer to the Bridge and try again. 8 SONOFF ZigBee Bridge supports connecting multiple sub-devices at the same time. Power the Bridge on, access the Bridge page in the eWeLink APP, and tap “Add”. Then set the sub-device to be pair to the pairing mode, and be patient until thepairing completes. Connecting Keep the device close enough to the hub. 25s > ZBBridge Added:0 No child device,please add. Add Add Device Looking for device 3 devices Found 9 Installation methods 1. Placed on the desktop for use. 2. Tear off the protective film of the 3M adhesive and stick the device on the desired area. Do not install on the metal surface, otherwise it will affect the wireless communication distance. 10 Product Introduction Reset button LED indicator Specifications Model: SNZB-03 Battery model: CR2450 Working voltage: 3V Wireless connection: ZigBee (IEEE 802.15.4) Working temperature : -10-40°C Working humidity: 10-90%RH (non-condensing) Material: PC Dimension: 40x35x28mm 11 Delete sub-devices Long press the reset button on the sub-device for 5s until the LED indicator flashes three times. In this case, the sub-device is deleted from the Bridge successfully. Features Low-energyLow battery notification Smart scenes Users can delete sub-devices directly from the sub-device page on APP. Movement detection SNZB-03 is a ZigBee low-energy motion sensor that can detect the movement of objects in real time. Connect it with the Bridge and you can create a smart scene to trigger other devices. 12 MADE IN CHINA Shenzhen Sonoff Technologies Co., Ltd. 1001, BLDG8, Lianhua Industrial Park, shenzhen, GD, China ZIP code: 518000 Website: sonoff.tech FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be coÿlocated or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

QA-FR-170-B Shenzhen Sonoff Technologies Co., Ltd. Add: Room 1001,10F,Building 8, Lianhua Industrial Park, Longyuan Road, Longhua District, Shenzhen, GD, China Tel: 0755-27955416 Fax: 0755-27955416 Email: [email protected] FCC Authorization Date: 2020-04-20 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Shenzhen Sonoff Technologies Co., Ltd., Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Jerry Shi Title: Manager

QA-FR-171-A Shenzhen Sonoff Technologies Co., Ltd. Add: Room 1001,10F,Building 8, Lianhua Industrial Park, Longyuan Road, Longhua District, Shenzhen, GD, China Tel: 0755-27955416 Fax: 0755-27955416 Email: [email protected] FCC Confidential Authorization Date: 2020-04-20 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID:2APN5SNZB-03 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Shenzhen Sonoff Technologies Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Jerry Shi Title: Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Antenna

FCC PART 15.247 TEST REPORT For Shenzhen Sonoff Technologies Co.,Ltd. Room 1001, 10F, Building 8, Lianhua Industrial Park, Longyuan Road, Longhua District, Shenzhen, GD, China Report Type: Original Report Product Type: Motion Sensor Re port Number: RDG200402008-00A Report Date: 2020-04-29 Reviewed By: Ivan Cao Assistant Manager Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industry Area, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn FCC ID:2APN5SNZB-03 Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG200402008-00A Page 2 of 28 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 DECLARATIONS ............................................................................................................................................................ 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 FCC §15.247 (i) & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 9 APPLICABLE STANDARD .............................................................................................................................................. 9 FCC §15.203 - ANTENNA REQUIREMENT ........................................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................................ 10 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 10 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS ............................................................................. 11 APPLICABLE STANDARD ............................................................................................................................................ 11 EUT SETUP ................................................................................................................................................................ 11 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 12 TEST PROCEDURE ...................................................................................................................................................... 12 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 12 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 13 TEST DATA ................................................................................................................................................................ 13 FCC §15.247(a) (2)–6 dB EMISSION BANDWIDTH .............................................................................................. 19 APPLICABLE STANDARD ............................................................................................................................................ 19 TEST PROCEDURE ...................................................................................................................................................... 19 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 19 TEST DATA ................................................................................................................................................................ 19 FCC §15.247(b) (3) - MAXIMUM PEAK CONDUCTED OUTPUT POWER ...................................................... 22 APPLICABLE STANDARD ............................................................................................................................................ 22 TEST…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View