2APNRGT819HARDWARE ASSY-TELEMATIC NODE

5G NR CAN-FD Remote Control USB 5G NR T-Box 5G N The GT819 is a global 5G NR T-Box designed by GosuncnWelink for EMMC for data storage and upgrading. It has 1 LIN and 1 CAN channels, is waterproof and dustproof with an IP50 rating, The software includes functions such as remote control, remote diagnosis, big data uploading, OTAupgrade, emergency call, SOMEIP Ethernet communication, global markets. It supports 1000M Ethernet , with an external etc., which can meet the requirements of vehicle networking. R In-vehicle Entertainment Application Scenario GT819 Product features Remote Status The log of Driving E-call/B-call Remote & Local Diagnostics OTA Bluetooth5.3 Ethernet Autosar Tobecometheworld'sleadingproviderofintelligentconnectedvehicleparts General Feature –Dimension: 166.5*160*25.8mm –Weight: 535±26 g –Voltage Range：9V~16V –Working Current：600mA ，1.5A MAX –Standby Current：＜9mA –Sleeping mode Current：＜1.5mA Hardware Feature sensor –RKE/TPM –1channelCAN1channelLIN –GNSS –2.4GHzBluetooth5.3 –Analogvoice –1000MEthernet –1000mAhNIMHNi-hbackupbatteryG- S Network Product parameter GLONASS G1(1597.5MHZ~1605.9MHZ) BeiDou B1(1559.1MH2~1563.1MHz) Galileo El(1573.4MHz~1577.5MHz) GPS L5,Galileo,E5a,BeiDou – 5G NR：n1,n2,n3,n5,n7,n12,n14, n25, n28,n29,n38,n40,n41,n48,n66,n71,n77, n78 – LTE FDD：B1,B2,B3,B4,B5,B7,B12,B13, B14,B17,B25,B26,B28,B29,B66,B71, – LTE TDD：B38,B40,B41,B48 – WCDMA：B1,B2,B4,B5 – GSM：850,900,1800,1900MHz – Bluetooth：2.4GHz – GNSS：GPS L1(1574.4MHz~1576.4MHz) B2a(1166.22MHz~1186.68MHz) s Hardware Interface –Ethernet interface –Four in one antenna connector interface*2 –Power interface –32 PIN connector Software Feature –Emergency call –Remote Vehicle Diagnostics –Provide network communication for vehicles –Remote vehicle control –Vehicle status report –T-Box OTA upgrade and vehicle ECU upgrade –Device log reporting –Tire Pressure reporting –TPMS –SOMEIP Diagnostic Function – – DoIP DoCAN Hardware Interface Define Hardware Interface Define Note FCC warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Note FCC warning: NoTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 ofthe FCC Rules, These limits are designed to provide reasonable protection against harmfil interference in a residential installation. This equipment generates, uses and can radiate radio freguency energy and, ifnot installed and used in accordance with the instuctions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation, Ifthis equipment does cause harmfinl interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to ty to correct the interference by one or more ofthe following measures. -----Reorient or relocate the receiving antenna. -----Increase the separation betveen the equipment and receiver . -----Connect the equipment into an outlet on a circuit different fom that to which the receiver is connected. ------Consult the dealer or an experienced radio/TVtechnician for help.

Gosuncn Technology Group Co.,Ltd. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: United Consulting Technology Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY City/Province/Zip: CA 91748 Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicantnoted below. U.S. Agent Signature: Date: 07/13/2026 Signed by (Printed Name/Title): David Wu/CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion ofany Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Gosuncn Technology Group Co.,Ltd. Grantee Code: 2APNR FRN: 0027463983 FCC ID: 2APNR-GD201E2 Contact Name: Xiaoting Chen Street Address: 6F, 2819 KaiChuang Blvd., Science Town, Huangpu District, Guangzhou, China Telephone No: +86-20-32068888 Email: [email protected] Applicant Signature: Date: 07/13/2026 Signed by (Printed Name/Title): Xiaoting Chen / Engineer

Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Gosuncn Technology Group Co.,Ltd. Address 6F, 2819 KaiChuang Blvd., Science Town, Huangpu District, Guangzhou, China FRN 0027463983 Grantee Code 2APNR FCC ID: 2APNRGT819 Authorized Contact Name Xiaoting Chen Contact Phone +86-20-32068888 Contact Email [email protected] I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2026/06/25 Print Name: Xiaoting Chen Title: Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Gosuncn Technology Group Co.,Ltd. Address 6F, 2819 KaiChuang Blvd., Science Town, Huangpu District, Guangzhou, China FRN 0027463983 Grantee Code 2APNR FCC ID: 2APNRGT819 Authorized Contact Name Xiaoting Chen Contact Phone +86-20-32068888 Contact Email [email protected] Gosuncn Technology Group Co.,Ltd. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. - the device is not capable of storing or running software listed on the covered list and therefore is inherently compliant. Link to the Covered List: Covered List Applicant Signature: Date: 2026/06/25 Print Name: Xiaoting Chen Title: Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Gosuncn Technology Group Co.,Ltd. Date: 2026/06/25 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2APNRGT819 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Gosuncn Technology Group Co.,Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Xiaoting Chen Title: Engineer Signature: On behalf of Company: Gosuncn Technology Group Co.,Ltd. Telephone: +86-20-32068888

Gosuncn Technology Group Co.,Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Company Name: Gosuncn Technology Group Co.,Ltd. Address: 6F, 2819 KaiChuang Blvd., Science Town, Huangpu District, Guangzhou, China Regarding: Confidentiality Request regarding application for FCC ID: 2APNRGT819 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions BOM Tune-up The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Xiaoting Chen Title: Engineer Company Name: Gosuncn Technology Group Co.,Ltd.

Page: 1 of 8 Appendix A.1_External Photos for SUCR2605000461AT Test Model No.: GT819 Page: 2 of 8 EUT Constructional Details (EUT Photos) Page: 3 of 8 Page: 4 of 8 Page: 5 of 8 Page: 6 of 8 Page: 7 of 8 Page: 8 of 8 DX1H External Antenna EX1H External Antenna - End of the Report -

Page: 1 of 6 Appendix A.2_Internal Photos for SUCR2605000461AT Test Model No.: GT819 Page: 2 of 6 EUT Constructional Details (EUT Photos) Page: 3 of 6 Internal ANT Page: 4 of 6 Page: 5 of 6 Page: 6 of 6 - End of the Report -

` Report No.: SUCR260500046105 Page: 1 of 12 TRF No. SUZSCONN-TRF-CR001_A_Jun 1 st ,2026 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215123 Member of the SGS Group （SGS SA） t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Connectivity Laboratory RF Exposure Evaluation Report Application No.: SUCR2605000461AT Applicant: Gosuncn Technology Group Co., Ltd. Address of Applicant: Address: 6F, No. 2819, KaiChuang Avenue, Science City, Huangpu District, Guangzhou City, Guangdong Province, China Manufacturer: Gosuncn Technology Group Co., Ltd. Address of Manufacturer: Address: 6F, No. 2819, KaiChuang Avenue, Science City, Huangpu District, Guangzhou City, Guangdong Province, China Equipment Under Test (EUT): EUT Name: HARDWARE ASSY-TELEMATIC NODE Model No.: GT819 Trade Mark: GOSUNCN FCC ID: 2APNRGT819 Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-06-12 Date of Issue: 2026-07-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. ` Report No.: SUCR260500046105 Page: 2 of 12 TRF No. SUZSCONN-TRF-CR001_A_Jun 1 st ,2026 South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Connectivity Laboratory Member of the SGS Group （SGS SA） Revision Record Version Description Date Remark 00 Original 2026-07-06 / Authorized for issue by: Tested By Hayley Zhang/Project Engineer Approved By Cedar Cheng /Reviewer ` Report No.: SUCR260500046105 Page: 3 of 12 TRF No. SUZSCONN-TRF-CR001_A_Jun 1 st ,2026 South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Connectivity Laboratory Member of the SGS Group （SGS SA） 1 Contents Page 1 Contents ................................................................................................................................................... 3 2 General Information ................................................................................................................................ 4 2.1 General Description of E.U.T. .......................................................................................................... 4 2.2 Separation Distance ......................................................................................................................... 5 2.3 Test Location .................................................................................................................................... 6 2.4 Test Facility ...................................................................................................................................... 6 3 RF Exposure Test Exemptions .............................................................................................................. 7 3.1 RF Exposure Test Exemptions for single RF sources ..................................................................... 7 3.2 RF Exposure Test Exemptions for Simultaneous Transmission ...................................................... 9 4 Measurement and Calculation ............................................................................................................. 11 4.1 RF Exposure Calculation................................................................................................................ 11 ` Report No.: SUCR260500046105 Page: 4 of 12 TRF No. SUZSCONN-TRF-CR001_A_Jun 1 st ,2026 South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Connectivity Laboratory Member of the SGS Group （SGS SA） 2 General Information 2.1 General Description of E.U.T. Hardware Version: 6608656717/A Software Version: 6608656593/B Antenna Type: Monopole Antenna Antenna Gain: GSM850: 0.33dBi(Internal Antenna); 0.29dBi(External Antenna DX1H); -0.5dBi(External Antenna EX1H) GSM1900: 1.49dBi(Internal Antenna); 2.75dBi(External Antenna DX1H); 0.83dBi(External Antenna EX1H) WCDMA Band II: 1.49dBi(Internal Antenna); 2.75dBi(External Antenna DX1H); 0.83dBi(External Antenna EX1H) WCDMA Band IV: 2.75dBi(Internal Antenna); 3.16dBi(External Antenna DX1H); 0.82dBi(External Antenna EX1H) WCDMA Band V: 0.33dBi(Internal Antenna); 0.29dBi(External Antenna DX1H); -0.5dBi(Externa…

Text truncated - open the document above for the full version.

Report No.: SUCR260500046102 Page: 1 of 74 TRF No. SUZSCONN-TRF-CR001_A_Jun 1 st ,2026 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215123 Member of the SGS Group （SGS SA） t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Connectivity Laboratory TEST REPORT Application No.: SUCR2605000461AT Applicant: Gosuncn Technology Group Co., Ltd. Address of Applicant: Address: 6F, No. 2819, KaiChuang Avenue, Science City, Huangpu District, Guangzhou City, Guangdong Province, China Manufacturer: Gosuncn Technology Group Co., Ltd. Address of Manufacturer: Address: 6F, No. 2819, KaiChuang Avenue, Science City, Huangpu District, Guangzhou City, Guangdong Province, China Equipment Under Test (EUT): EUT Name: HARDWARE ASSY-TELEMATIC NODE Model No.: GT819 Trade Mark: GOSUNCN FCC ID: 2APNRGT819 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-06-12 Date of Test: 2026-06-15 to 2026-06-24 Date of Issue: 2026-07-06 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Report No.: SUCR260500046102 Page: 2 of 74 TRF No. SUZSCONN-TRF-CR001_A_Jun 1 st ,2026 South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Connectivity Laboratory Member of the SGS Group （SGS SA） Revision Record Version Description Date Remark 00 Original 2026-07-06 / Authorized for issue by: Prepared By Hayley Zhang/Project Engineer Approved By Cedar Cheng /Reviewer Report No.: SUCR260500046102 Page: 3 of 74 TRF No. SUZSCONN-TRF-CR001_A_Jun 1 st ,2026 South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Connectivity Laboratory Member of the SGS Group （SGS SA） 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10- 2020/Cor1-2023 Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10- 2020/Cor1-2023 Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10- 2020/Cor1-2023 Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10- 2020/Cor1-2023 Section 11.9 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10- 2020/Cor1-2023 Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10- 2020/Cor1-2023 Section 11.10 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10- 2020/Cor1-2023 Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10- 2020/Cor1-2023 Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Report No.: SUCR260500046102 Page: 4 of 74 TRF No. SUZSCONN-TRF-CR001_A_Jun 1 st ,2026 South of No. 6 Plant, No. 1, RunSheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone 215123 t (86-512) 6229 2980 www.sgsgroup.com.cn SGS-CSTC Standards Technical Services (Suzhou) Co., Ltd. Connectivity Laboratory Member of the SGS Group （SGS SA） 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 Test Summary ......................................................................................................................................... 3 3 Contents ................................................................................................................................................... 4 4 General Information ................................................................................................................................ 6 4.1 Details of E.U.T. ............................................................................................................................... 6 4.2 Environment Parameter ................................................................................................................... 6 4.3 Description of Support Units .................................................…

Text truncated - open the document above for the full version.

BLE天线 BLE

Page: 1 of 4 Appendix A.3_ Photographs of Test Setup for SUCR2605000461AT Test Model No.: GT819 Page: 2 of 4 Test Setup Photo Radiated Spurious emissions (9kHz-30MHz) Radiated Spurious emissions (30MHz-1GHz) Page: 3 of 4 Radiated Spurious emissions (1GHz-18GHz) Radiated Spurious emissions (18GHz-40GHz) Page: 4 of 4 RF Conducted ---End of Report---