2APQIITACSCRENSmart Climate Controller(AC)

Rev 1.0 Page 1 of 3 IT- AC -S CREENSmartClimateController(AC) Installationand User Instruction Overview This documentprovidesan overviewof the TouchScreenIT-AC-SCREENoperations.The IT-AC-SCREENcan communicatewith variousdevicesto establishan automatedcontrolsystemfor QuietCoolwhole-housefans . Key Specifications IT- AC -SCREEN(Screen): ElectricalRatings : DC12 V Power supplymode : Poweredby the networkcable from IT-AC-HUB Purposeof Control:OperatingControl PollutionDegree2, RatedImpulseVoltage:330 V, Constructionof control:IndependentlyMountedControl Type 1 Action Operatingambienttemperature：0°C～+40°C Warning: - Disconnectpowerat the circuitbreaker beforeinstallingor servicing - Use wires rated at least 105*C– copper only - Installation/wiringmust be in accordance with nationaland local code regulations - Keep the enclosurecoverclosedat all times when not servicing. - Coverall unusedwireswith a wire connector FCC Regulations FCC Supplier’s Declaration of Conformity Unique Identifier: IT-AC-SCREEN Responsible Party: QC Manufacturing Inc. 26040 Ynez Rd. Temecula CA 92591 Tel:951-325-6340 FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution:changesor modificationsnot expresslyapprovedby the party responsiblefor compliancecould void the user ’s authorityto operate the equipment. Note:This equipmenthas been testedand foundto complywith the limits for a Class B digital device,pursuantto part 15 of the FCC Rules. Theselimits are designedto providereasonableprotectionagainst harmfulinterferencein a residentialinstallation.This equipment generates,uses and can radiateradio frequencyenergyand, if not installedand used in accordancewith the instructions,may cause harmfulinterferenceto radio communications.However,there is no guaranteethat interferencewill not occur in a particularinstallation.If this equipmentdoes causeharmfulinterferenceto radio or television reception,which can be determinedby turningthe equipmentoff and on, the user is encouragedto try to correctthe interferenceby one or more of the followingmeasures: Rev1.0 Page 2 of3 —Reorientorrelocatethereceivingantenna. —Increasetheseparationbetweentheequipmentandreceiver. —Connecttheequipmentintoanoutletonacircuitdifferentfromthatto whichthereceiverisconnected. —Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ICStatement: Thisdevicecontainslicence-exempttransmitter(s)/receiver(s)that complywithInnovation,ScienceandEconomicDevelopmentCanada’ slicence-exemptRSS(s).Operationissubjecttothefollowingtwo conditions: (1)Thisdevicemaynotcauseinterference. (2)Thisdevicemustacceptanyinterference,includinginterferencethat maycauseundesiredoperationofthedevice. L'émetteur/récepteurexemptdelicencecontenudansleprésent appareilestconformeaux CNRd'Innovation,SciencesetDéveloppementéconomiqueCanada applicablesauxappareilsradioexemptsdelicence.L'exploitationest autoriséeauxdeuxconditionssuivantes: 1)L'appareilnedoitpasproduiredebrouillage; 2)L'appareildoitacceptertoutbrouillageradioélectriquesubi,mêmesi lebrouillageestsusceptibled'encompromettrelefonctionnement. ThisequipmentcomplieswithICRSS-102radiationexposurelimitsset forthforanuncontrolledenvironment.Thisequipmentshouldbe installedandoperatedwithaminimumdistanceof20cmbetweenthe radiatorandanypartofyourbody. PourseconformerauxexigencesdeconformitéCNR102RF exposition,unedistancedeséparationd'aumoins20cmdoitêtre maintenueentrel'antennedecetappareilettouteslespersonnes. Installation IT-AC-SCREEN(TouchScreen): (Pleaseswitchoffmainpowerbeforewiring.Theinstallationshouldbe donebyqualifiedpersonnelonly) Chooseasuitableinstallationpositionandsecurelymounttheback mountingplate.InserttheEthernetcableconnectorintothe correspondingportontherearoftheIT-AC-SCREENdevice.Hangthe IT-AC-SCREENontotheinstalledmountingplate,ensuringitisfirmly seated. Operation First-TimeSetup(AfterPower-On) Uponinitialuseafterconnectingtopower,theusercanchoosebetweentwosetupmethods: 1.ContinuewithoutMobileDevice: AvailableModes:RUNmodeandTIMERmode.Theseoffersimple,easy-to-usefunctionality. Display:Showsreal-timeindoorandattictemperatures. 2.SetupwithMobileDevice: AccesstotheGoogleStoreorAppleStoretodownloadthelatestQuietCoolAirControlApp. AvailableModes:RUN,TIMER,AUTO,andECOmodes. OperatingModes： RUNMode:Thefanoperatescontinuouslyattheuser-setspeed.ItcanbemanuallyturnedoffbyswitchingtoOFFmode. Notefor1-SpeedFans:Thespeedsettinghasnoeffect;thefanwillalwaysrunatHigh(H)speed. TIMERMode:Theusercansetthefantorunforadurationof1to12hours.Thefanwillautomaticallyturnoffoncethetimerends. AUTO/ECOMode:Controlsthefanbasedonuser-presettemperatureandhumiditythresholds. Rev1.0 Page 3 of3 SettingsConfiguration(viaMobileApp): TemperatureSettings:Setpresetvaluesforindoor/outdoortemperatureandindoorhumidity:Cooling/HeatingStartPoint,Cooling/HeatingTurnOff, andHumidityTurnOff. AdjustSpeedTemperatures:Definethecorrespondingtemperaturethresholdsforeachfanspeed. TemperatureOffset:Calibratetheindoortemperaturesensorreadingforgreateraccuracy. Operation: InAUTOmode,thefanstatusisevaluatedandupdatedevery5minutesbasedonthepresetvalues. InECOmode,thefanstatusisevaluatedandupdatedevery30minutes. WhenthefanturnsoffinAUTOmode,thesystementersa1-hourdelayedshut-offcycleforthefan. InECOmode,ifthesystemdeterminescurrentenvironmentalconditionsareunsuitableforfanoperation,itwillautomaticallyswitchbacktoOFFmode. Add-onDevices(MobileSetupOnly) Thesefeaturesareavailableonlywhenusingthe"SetupwithMobileDevice"option. AddinganAtticFan:Ifventilationisinsufficient…

Text truncated - open the document above for the full version.

QC Manufacturing Inc. Date: 1/21/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: 2APQIITACSCREN Grantee FRN: 0027498658 1. QC Manufacturing Inc. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. QC Manufacturing Inc. (“the applicant”) certifies that, the device does not have cybersecurity and / or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered List installed on the device, nor will it be installed by the applicant anytime after certification. 3. QC Manufacturing Inc. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Name: Jeff Whitehouse Job Title: Director of Purchasing Company Name: QC Manufacturing Inc.

QC Manufacturing Inc. Date: 1/21/2026 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: 2APQIITACSCREN Grantee FRN: 0027498658 To whom it may concern: QC Manufacturing Inc. (“t he applicant”) as required by section §2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. Contact Person: Jeff Whitehouse Company Name: QC Manufacturing Inc. FCC FRN: 0027498658 Company US Address : 26040 Ynez rd, Temecula, CA 92591, United States Email: [email protected] Sincerely yours, Name: Jeff Whitehouse Job Title: Director of Purchasing Company Name: QC Manufacturing Inc.

QC Manufacturing Inc. Date: 1/21/2026 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc . as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: QC Manufacturing Inc. Contact Name: Jeff Whitehouse Title of Person: Director of Purchasing Address: 26040 Ynez rd, Temecula, CA 92591, United States

QC Manufacturing Inc. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2APQIITACSCREN To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: QC Manufacturing Inc. Contact Name: Jeff Whitehouse Title of Person: Director of Purchasing Address: 26040 Ynez rd. Temecula, California 92591, United States Date:1/21/2026

External Photographs Project No.:4791967272-1 Page 2 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-1 View of EUT-2 Page 3 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-3 View of EUT-4 Page 4 of 4 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-5

C AB C DE F H I J G 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 AB C DE F H I J G 91.3 51 8.6 7.6 21 21.8 Model: IT-AC-SCREEN Name: Smart Climate Controller (AC) Voltage: 12V DC FCC ID:2APQIITACSCREN IC: 30370-ITACSCREN For Use in Class 2 Circuit Only Use copper Conductors only 01.2022(Week.Year) Model: IT-AC-SCREEN Name: Smart Climate Controller (AC) Voltage: 12V DC FCC ID:2APQIITACSCREN IC: 30370-ITACSCREN For Use in Class 2 Circuit Only Use copper Conductors only 01.2022(Week.Year) Location: Note: This label will be permanently attached in the product

Internal Photographs Project No.:4791967272-1 Page 2 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-1 Internal View of EUT-2 Page 3 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-3 Internal View of EUT-4 Page 4 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-5 Internal View of EUT-6 BLE 1M&2M Ant1 BT& BLE 1M & WiFi Ant2 Page 5 of 5 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-7 Internal View of EUT-8

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC RF EXPOSURE REPORT For Smart Climate Controller(AC) MODEL NUMBER: IT-AC-SCREEN REPORT NUMBER: 4792046760-1-RF-5 FCC ID: 2APQIITACSCREN ISSUE DATE: December 16, 2025 Prepared for QC Manufacturing Inc. 26040 Ynez rd. Temecula, California 92591, United States Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4792046760-1-RF-5 Page 2 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 December 16, 2025 Initial Issue REPORT NO.: 4792046760-1-RF-5 Page 3 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. FACILITIES AND ACCREDITATION ................................................................................. 5 4. REQUIREMENT ................................................................................................................. 6 REPORT NO.: 4792046760-1-RF-5 Page 4 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: QC Manufacturing Inc. Address: 26040 Ynez rd. Temecula, California 92591, United States Manufacturer Information Company Name: Shenzhen Asia Bright Co., Ltd Address: 2nd and 3rd Floor Building E, North Area, No.2 of Shangxue Science Park,Bantian, Shenzhen, China EUT Information EUT Name: Smart Climate Controller(AC) Model: IT-AC-SCREEN Sample Received Date: November 11, 2025 Sample Status: Normal Sample ID: 9118817 Date of Tested: November 12, 2025 to December 15, 2025 APPLICABLE STANDARDS STANDARD TEST RESULTS 447498 D04 Interim General RF Exposure Guidance v01 PASS Prepared By: Checked By: Daniel Zhang Kebo Zhang Project Engineer Operations Leader Approved By: Stephen Guo Operations Manager REPORT NO.: 4792046760-1-RF-5 Page 5 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with FCC 47 CFR Part 1 Subpart I, section 1.1307 and KDB 447498 D04 Interim General RF Exposure Guidance v01. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Declaration of Conformity (DoC) and Certification rules ISED (Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been registered and fully described in a report filed with ISED. The Company Number is 21320 and the test lab Conformity Assessment Body Identifier (CABID) is CN0046. VCCI (Registration No.: G-20192, C-20153, T-20155 and R-20202) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name: Chamber D, the VCCI registration No. is G-20192 and R-20202 Shielding Room B, the VCCI registration No. is C-20153 and T-20155 Note 1: All tests measurement facilities use to collect the measurement data are located at Building 10, Innovation Technology Park, Song Shan Lake Hi tech Development Zone, Dongguan, 523808, China Note 2: The test anechoic chamber in UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch had been calibrated and compared to the open field sites and the test anechoic chamber is shown to be equivalent to or worst case from the open field site. Note 3: For below 30MHz, lab had performed measurements at test anechoic chamber and comparing to measurements obtained on an open field site. And these measurements below 30MHz had been correlated to measurements performed on an OFS. REPORT NO.: 4792046760-1-RF-5 Page 6 of 7 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM No.: 10-SL-F0112 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 4. REQUIREMENT LIMIT AND CALCULATION METHOD According to 447498 D04 Interim General RF Exposure Guidance v01, 2.1.4 MPE-Based Exemption An alternative to the SAR-based exemption is provided in § 1.1307(b)(3)(i)(C), for a much wider frequency range, from 300 kHz to 100 GHz, applicable for separation distances greater or equa…

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC 47 CFR PART 15 SUBPART C ISED RSS-247 Issue 4 TEST REPORT For Smart Climate Controller(AC) MODEL NUMBER: IT-AC-SCREEN REPORT NUMBER: 4792046760-1-RF-2 ISSUE DATE: December 16, 2025 FCC ID: 2APQIITACSCREN IC: 30370-ITACSCREN Prepared for QC Manufacturing Inc. 26040 Ynez rd. Temecula, California 92591, United States Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Room 101, Building 2, No.4, Information Road, Songshan Lake, Dongguan, Guangdong, China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4792046760-1-RF-2 Page 2 of 92 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 December 16, 2025 Initial Issue REPORT NO.: 4792046760-1-RF-2 Page 3 of 92 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC 47 CFR Part 15.203 RSS-GEN Clause 6.8 Pass AC Power Line Conducted Emission ANSI C63.10-2020 Clause 6.2 FCC 47 CFR Part 15.207 N/A Conducted Output Power ANSI C63.10-2020 Clause 7.8.5 FCC 47 CFR Part 15.247 (b) (1) RSS-247 Clause 6.2.3.2 Pass 20 dB Bandwidth and 99% Occupied Bandwidth ANSI C63.10-2020 Clause 6.9.2 & 6.9.3 FCC 47 CFR Part 15.247 (a) (1) RSS-247 Clause 6.2.3.1 (a) RSS-Gen Clause 6.7 Pass Carrier Hopping Channel Separation ANSI C63.10-2020 Clause 7.8.2 FCC 47 CFR Part 15.247 (a) (1) RSS-247 Clause 6.2.3.1 (a) Pass Number of Hopping Frequency ANSI C63.10-2020 Clause 7.8.3 FCC 47 CFR Part 15.247 (a) (1) III RSS-247 Clause 6.2.3.1 (b) Pass Time of Occupancy (Dwell Time) ANSI C63.10-2020 Clause 7.8.4 FCC 47 CFR Part 15.247 (a) (1) III RSS-247 Clause 6.2.3.1 (b) Pass Conducted Bandedge and Spurious Emission ANSI C63.10-2020 Clause 6.10.4 & Clause 7.8.7 FCC 47 CFR Part 15.247 (d) RSS-247 Clause 6.6 Pass Radiated Band edge and Spurious Emission ANSI C63.10-2020 Clause 6.4 & 6.5 & 6.6 & 7.8.8 FCC 47 CFR Part 15.247 (d) FCC 47 CFR Part 15.209 FCC 47 CFR Part 15.205 RSS-247 Clause 6.6 RSS-GEN Clause 8.9 RSS-GEN Clause 8.10 Pass Duty Cycle ANSI C63.10-2020, Clause 11.6 None; for reporting purposes only. Pass Note: 1. N/A: In this whole report not applicable. 2. For ISED, this report is also performed according to ANSI C63.10-2020 + Cor.1-2023 + C63.10a-2024 + Errata to C63.10a-2024 *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to < FCC 47 CFR Part 15 SUBPART C ISED RSS-247 Issue 4> when <Simple Acceptance> decision rule is applied. REPORT NO.: 4792046760-1-RF-2 Page 4 of 92 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO: 10-SL-F0035 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 6 2. TEST METHODOLOGY ......................................................................................................... 7 3. FACILITIES AND ACCREDITATION ..................................................................................... 7 4. CALIBRATION AND UNCERTAINTY ................................................................................... 8 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 8 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 8 5. EQUIPMENT UNDER TEST .................................................................................................. 9 5.1. DESCRIPTION OF EUT ........................................................................................... 9 5.2. CHANNEL LIST ........................................................................................................ 9 5.3. MAXIMUM POWER .................................................................................................. 9 5.4. TEST CHANNEL CONFIGURATION ...................................................................... 10 5.5. THE WORSE CASE POWER SETTING PARAMETER .......................................... 10 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ......................................................... 11 5.7. SUPPORT UNITS FOR SYSTEM TEST ................................................................. 12 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 13 7. ANTENNA PORT TEST RESULTS ..................................................................................... 15 7.1. CONDUCTED OUTPUT POWER ........................................................................... 15 7.2. 20 DB BANDWIDTH AND 99% OCCUPIED BANDWIDTH ..................................... 16 7.3. CARRIER HOPPING CHANNEL SEPARATION ..................................................... 18 7.4. NUMBER OF HOPPING FREQUENCY .................................................................. 20 7.5. TIME OF OCCUPANCY (DWELL TIME) ................................................................. 22 7.6. CO…

Text truncated - open the document above for the full version.

NOTE:ThisdocumentisissuedbyShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,thetestreportshallnotbereproducedexceptin fullwithoutpriorwrittenpermissionofthecompany.Thetestresultsapplyonlytotheparticularsample(s)testedandtothespecifictestscarried outwhichisavailableonrequestforvalidationandinformationconfirmedatourwebsite. MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.,FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page1of 14 REPORTNo.：SZ26010378E01 TESTREPORT APPLICANT:ShenzhenAsiaBrightCO.,LTD PRODUCTNAME:ABANTB MODELNAME:ABANTB TRADENAME:ABRT BRANDNAME:N/A STANDARD(S):IEEEStd149-2021 RECEIPTDATE:2026-01-22 TESTDATE:2026-01-22 ISSUEDATE:2026-02-24 Editedby: GuoPenghua(Rapporteur) Approvedby: ChiShide(Supervisor) MORLAB ShenzhenMorlabCommunicationsTechnologyCo.,Ltd.FL.1-3,BuildingA, FeiYangSciencePark,No.8LongChangRoad,Block67,BaoAnDistrict, ShenZhen,GuangDongProvince,P.R.China Tel:86-755-36698555Fax:86-755-36698525 Http://www.morlab.cnE-mail:[email protected] Page2of14 REPORTNo.：SZ26010378E01 DIRECTORY 1.TechnicalInformation ........................................................................................................3 1.1.ApplicantandManufacturerInformation ....................................................................3 1.2.EquipmentUnderTest(EUT)Description...................................................................3 2.TestResults........................................................................................................................4 2.1.AppliedReferenceDocuments.....................................................................................4 2.2.TestConditions...............................................................................................................4 2.3.MeasurementUncertainty.............................................................................................4 2.4.TestResultslists.............................................................................................................5 AnnexATestSetupPhotos..................................................................................................6 AnnexBFigures .....................................................................................................................7 1.2DRadiationPattern .........................................................................................................7 2.3DRadiationPattern .........................................................................................................8 AnnexCEUTPhotos ...........................................................................................................10 AnnexDTestingLaboratoryInformation .........................................................................13 1.IdentificationoftheResponsibleTestingLaboratory................................................13 2.IdentificationoftheResponsibleTestingLocation....................................................13 3.TestEquipmentUtilized..................................................................................................13 3.1TestEquipments............................................................................................................13 3.2TestSoftware..................................................................................................................13 Notes...........................................................................…

Text truncated - open the document above for the full version.