2APU5-PBWS10Wireless Power Bank

NOTE: This device complies with part 18 of the FCC Rules. Information to the user. 1. The device has potential interference, but the interference is very small and meets the requirements of the FCC rule 2. Equipment system maintenance is simple, please refer to the manual 3. The user can take simple measures to correct the interference. Such as staying away from interference sources, turning off interference sources, etc. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF exposure compliance statement: This device has been evaluated to meet the general RF exposure requirement, it can be used in portable exposure condition without restriction.

JMTek Industries（Shenzhen）Co.,Ltd Agent Authorization Company: JMTek Industries（Shenzhen）Co.,Ltd Address: 14G, Innovation Tech Building, Quanzhi Science and Technology innovation Park, ShaJing Street, Baoan District, ShenZhen, China Product Name: Wireless Power Bank Model Number(s): PBWS10 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: Feb. 14, 2020Signature: Name: Title: manager Company: JMTek Industries（Shenzhen）Co.,Ltd Cici Jiang

JMTek Industries（Shenzhen）Co.,Ltd 14G, Innovation Tech Building, Quanzhi Science and Technology innovation Park, ShaJing Street, Baoan District, ShenZhen, China Tel: 0755-86332800 Email: [email protected] Feb. 25, 2019 FCC ID: 2APU5-PBWS10 Model Number: PBWS10 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, We, JMTek Industries(Shenzhen) Co., Ltd. hereby declare that our product (Wireless Power Bank) Model Number: PBWS10 will conduct FCC compliance testing, the sDOC part in recognized test lab. (Shenzhen HUAK Testing Technology Co., Ltd.). The product conforms KDB 680106 D01 V03 Clause 5 b) as follows; Requirements of KDB 680106 D01 Yes / No Description Power transfer frequency is less than 1 MHz Yes The device operate in the frequency range 115.0 KHz - 205.0 KHz Output power from each primary coil is less than 15 watts Yes The maximum output power of the primary coil is 5W. The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Yes The transfer system includes single coil that is able to detect receiver device. Client device is placed directly in contact with the transmitter. Yes Client device is placed directly in contact with the transmitter. Mobile exposure conditions only (portable exposure conditions are not covered by this exclusion). Yes Mobile exposure conditions only The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are Yes The EUT H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are JMTek Industries（Shenzhen）Co.,Ltd 14G, Innovation Tech Building, Quanzhi Science and Technology innovation Park, ShaJing Street, Baoan District, ShenZhen, China Tel: 0755-86332800 Email: [email protected] demonstrated to be less than 50% of the MPE limit. demonstrated to be less than 50% of the MPE limit. Please contact me if you have any question. Sincerely, Name: Cici Jiang Company: JMTek Industries（Shenzhen）Co.,Ltd Address: 14G, Innovation Tech Building, Quanzhi Science and Technology innovation Park, ShaJing Street, Baoan District, ShenZhen, China Tel: 0755-86332800 Email: [email protected]

JMTek Industries（Shenzhen）Co.,Ltd Date: Feb. 14, 2020 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2APU5-PBWS10 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cici Jiang Title: manager

Size:10*40mm

CoilAntenna

Page 1 of 20 Report No.: HK2001080081-E Prepared for : JMTek Industries（Shenzhen）Co.,Ltd 14G, Innovation Tech Building, Quanzhi Science and Technology innovation Park, ShaJing Street, Baoan District, ShenZhen, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park, Fuhai Street, Bao'an District, Shenzhen City, China Date of Test: Jan. 06, 2020 ~ Jan. 13, 2020 Date of Report: Jan. 13, 2020 Report Number: HK2001080081-E TEST REPORT FCC CFR 47 PART 18 Test report On Behalf of JMTek Industries（Shenzhen）Co.,Ltd For Wireless Power Bank Model No.: PBWS10 FCC ID: 2APU5-PBWS10 Page 2 of 20 Report No.: HK2001080081-E TEST RESULT CERTIFICATION Applicant’s name ................. : JMTek Industries（Shenzhen）Co.,Ltd Address ................................. : 14G, Innovation Tech Building, Quanzhi Science and Technology innovation Park, ShaJing Street, Baoan District, ShenZhen, China Manufacture's Name ............ : JMTek Industries（Shenzhen）Co.,Ltd Address ................................. : 14G, Innovation Tech Building, Quanzhi Science and Technology innovation Park, ShaJing Street, Baoan District, ShenZhen, China Product description Trade Mark ................................ : N/A Product name ........................... : Wireless Power Bank Model and/or type reference : PBWS10 Standards ............................. : FCC CFR 47 PART 18 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : Jan. 06, 2020 ~ Jan. 13, 2020 Date of Issue ........................................... : Jan. 13, 2020 Test Result ............................................... : Pass Prepared by: Project Engineer Reviewed by: Project Supervisor Approved by: Technical Director Page 3 of 20 Report No.: HK2001080081-E Table of Contents Page 1. SUMMARY............................................................................................................................................................ 4 1.1. TEST PROCEDURES AND RESULTS ............................................................................................................................ 4 1.2. TEST FACILITY .............................................................................................................................................................. 4 1.3. STATEMENT OF THE MEASUREMENT UNCERTAINTY ............................................................................................................... 4 2. GENERAL INFORMATION ....................................................................................................................................... 5 2.1. GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 5 2.2. CARRIER FREQUENCY OF CHANNELS ................................................................................................................................. 6 2.3. OPERATION OF EUT DURING TESTING .............................................................................................................................. 6 2.4. DESCRIPTION OF TEST SETUP .......................................................................................................................................... 6 2.5. EQUIPMENTS USED DURING THE TEST .............................................................................................................................. 7 3. CONDUCTED EMISSIONS TEST ............................................................................................................................... 8 4. RADIATED EMISSIONS ......................................................................................................................................... 11 4.1. ANTENNA REQUIREMENT...................................................................................................................................... 15 5. TEST SETUP PHOTOS OF THE EUT ........................................................................................................................ 16 6. PHOTOS OF THE EUT ........................................................................................................................................... 17 Page 4 of 20 Report No.: HK2001080081-E 1. SUMMARY 1.1. TEST PROCEDURES AND RESULTS DESCRIPTION OF TEST FCC PART RULE RESULT CONDUCTED EMISSIONS TEST 18.305 COMPLIANT RADIATED EMISSION TEST 18.307(b) COMPLIANT ANTENNA REQUIREMENT 15.203 COMPLIANT 1.2. Test Facility Test Firm Shenzhen HUAK Testing Technology Co., Ltd. Address 1F, B2 Building, Junfeng Zhongcheng Zhizao Innovation Park,Heping Community, Fuhai Street, Bao'an District, Shenzhen, China There is one 3m semi-anechoic chamber and two line conducted labs for final test. The Test Sites meet the requirements in documents ANSI C63.4 and CISPR 32/EN 55032 requirements. 1.3. Statement of the measurement uncertainty Measurement Uncertainty Conducted Emission Expanded Uncertainty Radiated emission expanded uncertainty(9kHz-30MHz) Radiated emission expanded uncertainty(30MHz-1000MHz) Radiated emission expanded uncertainty(Above 1GHz) = 2.23dB, k=2 = 3.08dB, k=2 = 4.42dB, k=2 = 4.06dB, k=2 Page 5 of 20 Report No.: HK2001080081-E 2. GENERAL INFORMATION 2.1. General Description of EUT Product Name: Wireless Power Bank Model/Type reference: PBWS10 Serial Model: N/A Trade Mark N/A FCC ID 2APU5-PBWS10 Hardware Version: V14 Software Version: / Antenna type: Coil Antenna Antenna gain: 0 d…

Text truncated - open the document above for the full version.

30MHz-1000MHz ConductedEmission