2APXNLACC180Aircharge Wireless Charging Pad

AIRC HARGE WIRELESS CHARGING PAD AIR43419 Ho w to Use & Main Functions US B Type C / Charging Area C onnect a USB Type-C cable to the wireless charger USB Type-C power input. Place your wireless charging–compatible device on the charging area; charging will start automatically. This product uses magnetic induction technology. Due to the characteristics of this technology, if the device is not properly aligned with the charging area, charging may not start correctly. Using a USB power source with a lower current than specied may cause malfunction. It is recommend- ed to use an adapter that provides the specied current. In case of a charging error (indicated by the LED blinking), li the device from the charger and place it back on to resume normal charging. If the problem persists, disconnect the USB cable, wait about 10 seconds, and reconnect it before using it again. Depending on the device model and usage environment, there may be a delay of about 4–5 seconds before charging begins aer placing the device on the charger. This is a natural phenomenon caused by magnetic eld synchronisation and does not indicate a defect in the device or charger. U sage Precautions Do not disassemble, modify, or repair the product yourself. As this is an electrical device, avoid use in places with re, excessive heat, or humidity. If the product comes into contact with water, alcohol, benzene, or other chemicals, or is exposed to re risk, immediately disconnect the power supply and only use it again aer ensuring it is safe. During charging, place the device on the wireless charger and check the LED or device display to conrm charging has started correctly. Do not drop the product from high places. Do not place heavy objects on the wireless charger. Do not touch the outlet or plug with wet hands, as this may cause electric shock or re. LED St atus & Sequence Charging in Progress RED Fully Charged GREEN FLASHING RED Error On po wered up, red for 2 seconds, then green for 2 seconds, and then o (standby). For certain devices, the LED indicator may remain red even aer charging is complete. This behaviour is normal and does not indicate a malfunction Input: 5V / 2A Output: 5W Max Operating Ambient Temperature: 0°C to 30°C Product Dimensions: W: 70 mm / L: 70 mm / H: 11 mm Product Weight: 44g Operating Frequency: 115-205 kHz Pr oduct Specication against harmful interference in a residential installation. Any Changes or modifications not expressly approved FCC Caution: by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with body. minimum distance 20cm between the radiator& your

Company: ASAP Technology(Jiangxi) Co., Ltd. Address: Ji'an Industrial Park Ji'an, Jiangxi China 343100 Email:[email protected] Tel: +86 796 7118988 Fax: +86 796 8405808 Date: 2026-02-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attestation letter Our product Aircharge Wireless Charging Pad, Model name: AIR43419, FCC ID: 2APXNLACC180, for the purpose of marketing, this product only supports 115-205kHz. The other functions, bands and modes was disabled to use by manufacturer in the software, the end user has no capability to activate it. Sincerely, Signature: Contact Person:Xiaolan Deng Title: Manager

Company: ASAP Technology(Jiangxi) Co., Ltd. Address: Ji'an Industrial Park Ji'an, Jiangxi China 343100 Email:[email protected] Tel: +86 796 7118988 Fax: +86 796 8405808 CFR 47 §2.911(d)(5)(i) Attestation Letter Attestation Letter Date: 2026-02-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2APXNLACC180 ASAP Technology(Jiangxi) Co., Ltd. certifies that the equipment for which authorization is sought, is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: Contact Person:Xiaolan Deng Title: Manager

Company: ASAP Technology(Jiangxi) Co., Ltd. Address: Ji'an Industrial Park Ji'an, Jiangxi China 343100 Email:[email protected] Tel: +86 796 7118988 Fax: +86 796 8405808 CFR 47 §2.911 (d)(5)(ii) Attestation Letter Attestation Letter Date: 2026-02-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2APXNLACC180 ASAP Technology(Jiangxi) Co., Ltd. certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, Signature: Contact Person:Xiaolan Deng Title: Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2026-02-26 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID:2APXNLACC180 ASAP Technology(Jiangxi) Co., Ltd. certifies that, as of the date of the filing of the application, Luxshare-ICT Inc is our designated U.S. agent for service of process for the above referenced FCC ID. ASAP Technology(Jiangxi) Co., Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Luxshare-ICT Inc accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Luxshare-ICT Inc Address: 480 N.McCarthy Blvd #280, Milpitas, CA 95035 United States FRN:0033589201 Tel.: +1 (408) 957-0535 59081 Email: [email protected] Signed by (printed name): Kyle Liu Signature: Applicant: ASAP Technology(Jiangxi) Co., Ltd. Address: Ji'an Industrial Park Ji'an, Jiangxi China 343100 FRN:0027557297 Tel:+86 796 7118988 Email: [email protected] Signed by (printed name):Xiaolan Deng Signature:

QA-FR-170-B Company: ASAP Technology(Jiangxi) Co., Ltd. Address: Ji'an Industrial Park Ji'an, Jiangxi China 343100 Email:[email protected] Tel: +86 796 7118988 Fax: +86 796 8405808 FCC Authorization Date: 2026-02-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We ASAP Technology(Jiangxi) Co., Ltd., the undersigned, hereby authorize Shenzhen Accurate Technology Co., Ltd. to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Shenzhen Accurate Technology Co., Ltd. on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely, Signature: Contact Person: Xiaolan Deng Title: Manager

Company: ASAP Technology(Jiangxi) Co., Ltd. Address: Ji'an Industrial Park Ji'an, Jiangxi China 343100 Email:[email protected] Tel: +86 796 7118988 Fax: +86 796 8405808 FCC Confidential Authorization Date: 2026-02-26 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2APXNLACC180 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, ASAP Technology(Jiangxi) Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Contact Person: Xiaolan Deng Title: Manager

Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF EUT External Photos External Photos Page 1 / 4 External Photos Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF EUT External Photos External Photos Page 2 / 4 Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF EUT External Photos External Photos Page 3 / 4 Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF EUT External Photos External Photos Page 4 / 4 ***** END ***** ***** END *****

EXHIBITA-FCC ID LABEL AND LOCATION FCC ID Label & Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the time purchase (Labeling requirements per 2.295)

Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF EUT Internal Photos Internal Photos Page 1 / 3 Internal Photos Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF EUT Internal Photos Internal Photos Page 2 / 3 Coil Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF EUT Internal Photos Internal Photos Page 3 / 3 ***** END *****

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn TR-EM-RF034 Page 1 of 13 Version 3.0 TEST REPORT Applicant Name:ASAP Technology(Jiangxi) Co., Ltd. Address:Ji'an Industrial Park Ji'an, Jiangxi China 343100 Manufacturer Name:CMS Industries Ltd Address:Downsview House Grove Technology Park Wantage, Oxfordshire OX12 9FA United Kingdom Report Number:2501A92215E-RF-00 FCC ID:2APXNLACC180 Test Standard (s) 47 CFR, Part 1, Subpart I, Section 1.1310; 47 CFR, Part 2, Subpart J, Section 2.1091 Sample Description Product Type:Aircharge Wireless Charging Pad Model No.:AIR43419 Multiple Model(s) No.:N/A Trade Mark:Aircharge Date Received:2025/12/19 Issue Date:2026/03/03 Test Result:Pass ▲ ▲ In the configuration tested, the EUT complied with the standards above. Prepared and Checked By:Approved By: Bruce LinNancy Wang RF EngineerRF Supervisor Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501A92215E-RF-00 TR-EM-RF034 Page 2 of 13 Version 3.0 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ..........................................................................................................................3 GENERAL INFORMATION ........................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)......................................................................................4 OBJECTIVE ....................................................................................................................................................................4 TEST METHODOLOGY....................................................................................................................................................4 MEASUREMENT UNCERTAINTY .....................................................................................................................................4 TEST FACILITY ..............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ...........................................................................................................................6 DESCRIPTION OF TEST CONFIGURATION .......................................................................................................................6 EUT EXERCISE SOFTWARE ...........................................................................................................................................6 LOCAL SUPPORT EQUIPMENT ........................................................................................................................................6 EXTERNAL I/O CABLE...................................................................................................................................................6 SUMMARY OF TEST RESULTS ................................................................................................................................7 TEST EQUIPMENT LIST ............................................................................................................................................8 FCC §2.1091 - MAXIMUM PERMISSIBLE EXPOSURE (MPE)............................................................................9 APPLICABLE STANDARD ...............................................................................................................................................9 BLOCK DIAGRAM OF TEST SETUP ...............................................................................................................................10 TEST PROCEDURES ......................................................................................................................................................10 TEST DATA..................................................................................................................................................................10 EUT PHOTOGRAPHS ................................................................................................................................................12 TEST SETUP PHOTOGRAPHS ................................................................................................................................13 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501A92215E-RF-00 TR-EM-RF034 Page 3 of 13 Version 3.0 DOCUMENT REVISION HISTORY Revision NumberReport NumberDescription of RevisionDate of Revision 02501A92215E-RF-00Original Report 2026/03/03 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501A92215E-RF-00 TR-EM-RF034 Page 4 of 13 Version 3.0 GENERAL INFORMATION Product Description for Equipment under Test (EUT) Frequency Range115-205kHz Antenna TypeCoil Wireless Output Power5Watts Input VoltageDC 5V from USB port Sample serial number3ESC-1 (Assigned by BACL, Shenzhen) Sample/EUT StatusGood con…

Text truncated - open the document above for the full version.

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. The information marked “#” is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included but no need marked. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. Shenzhen Accurate Technology Co., Ltd. Floor 1, KuMaKe Building, Dongzhou Community, Guangming Street, Guangming District, Shenzhen, Guangdong, China. Tel: +86 755-26503290 Web: www.atc-lab.com Rev:A/4.0(2024/11/01) Page 1 of 28 TR-4-E-R028 TEST REPORT Applicant Name: ASAP Technology(Jiangxi) Co., Ltd. Address: Ji'an Industrial Park Ji'an, Jiangxi China 343100 Report Number 2504A92216E-RF-00A FCC ID: 2APXNLACC180 Test Standard (s) FCC PART 15C Sample Description Product Name: Aircharge Wireless Charging Pad Model No.: AIR43419 Trade Mark: Aircharge Date Received: 2025-12-22 Report Date: 2026-02-11 Test Result: The EUT complied with the standards above. Prepared and Checked By: Approved By: Amanda Wei Bob.Liao EMC Engineer EMC Engineer Shenzhen Accurate Technology Co., Ltd. Report No.: 2504A92216E-RF-00A Rev:A/4.0(2024/11/01) Page 2 of 28 TR-4-E-R028 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ................................................................................................................ 3 GENERAL INFORMATION ............................................................................................................................ 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................ 4 OBJECTIVE ................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................... 4 TEST FACILITY .............................................................................................................................................. 4 SYSTEM TEST CONFIGURATION ............................................................................................................... 5 DESCRIPTION OF TEST CONFIGURATION ......................................................................................................... 5 SPECIAL ACCESSORIES AND EQUIPMENT MODIFICATIONS ............................................................................... 5 SUPPORT EQUIPMENT LIST AND DETAILS ....................................................................................................... 5 EXTERNAL I/O CABLE .................................................................................................................................... 5 BLOCK DIAGRAM OF TEST SETUP .................................................................................................................. 5 SUMMARY OF TEST RESULTS ................................................................................................................... 7 TEST EQUIPMENT LIST ............................................................................................................................... 8 ANTENNA REQUIREMENT .......................................................................................................................... 9 APPLICABLE STANDARD ................................................................................................................................. 9 ANTENNA CONNECTOR CONSTRUCTION ......................................................................................................... 9 AC LINE CONDUCTED EMISSIONS .......................................................................................................... 10 APPLICABLE STANDARD ............................................................................................................................... 10 EUT SETUP ................................................................................................................................................ 10 EMI TEST RECEIVER SETUP ........................................................................................................................ 10 TEST PROCEDURE ...................................................................................................................................... 10 CALCULATION ............................................................................................................................................. 11 TEST DATA ................................................................................................................................................. 11 RADIATED EMISSIONS .............................................................................................................................. 14 APPLICABLE STANDARD ............................................................................................................................... 14 EUT SETUP ................................................................................................................................................ 14 EMI TEST RECEIVER ................................................................................................................................... 15 TEST PROCEDURE ...................................................................................................................................... 15 CALCULATION ......................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501A92215E-RF-TSP Page 1 of 3 EXHIBIT D - TEST SETUP PHOTOGRAPHS A Position B Position Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501A92215E-RF-TSP Page 2 of 3 C Position D Position Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2501A92215E-RF-TSP Page 3 of 3 E Position F Position

Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF-00A Test Photos Test Photos Page 1 / 2 Photo of Power Line Conducted Emission Measurement Shenzhen Accurate Technology Co., Ltd. No.: 2504A92216E-RF-00A Test Photos Test Photos Page 2 / 2 Radiated Spurious Emissions Test View (9kHz-30MHz) Radiated Spurious Emissions Test View (30MHz-1GHz) ***** END *****