2APXUES-SNG01Smart Nutrition Scale

Smart Nutrition Scale ES-SNG01-W UNIT - TARE Digital Scale Specialist Thank you for choosing RENPHO! This food scale is a great compa nion for healthy meal prep. It works with the Gennec App and helps accur ately calculate the amount of the calories in your food. You can easily keep an up-to-date nutrition log of all your meals, track your daily nutrition, an d improve your diet for better health! We sincerely hope that you enjoy using your new RENPHO Nutrition Scale! RENPHO Smart Nutrition Scale User Manual What's IncludedCaution Your RENPHO Nutrition Scale box includes:1. RENPHO Nutrition Scale2. Batteries: 3 * AAA(1.5V)3. User Manual4. Warranty CardWhen using this device, certain basic safety precautions must b e followed, including the following: Scale1. DO NOT exceed the 11 lbs (5 kg) weight capacity, as doing so may dama ge the scale. An ove- rload indicator will appear on the display if the limit is exceeded. 2. Avoid exposing the scale to damp environments or extreme tem peratures. 3. DO NOT immerse the scale in water or any liquid. If the liquid is spil led on the digital display or buttons, immediately wipe the scale clean with a soft cloth to avoid internal damage. 4. This scale has been designed for household use only and is n ot intended for medical or comme- rcial use.5. Handle the scale with care. Keep the scale in a cool, dry en vironment. 01 Batteries1. DO NOT mix new and used batteries. 2. To insert or replace the batteries, open the battery compart ment located underneath the unit. When inserting the batteries, always observe the correct polarit y. Please put the 3xAAA batteries into the battery compartment with the correct anode and cathode.3. If the low battery indicator ( " Lo " ) & appears on the display, replace the batteries. 4. If the scale is not in use for an extended period of time, r emove the batteries to conserve battery life and extend the life of the scale. FCC 02 FCC ID: 2APXUES-SNG01This device complies with Industry Canada licence-exempt RSS st andard(s) and US Electronic Code of Federal Regulations 47 CFR FCC Part 15; Operation is su bject to the following three conditions:(1) This device may not cause harmful interference, and(2) this device must accept any interference received, includin g interference that may cause unde- sired operation.(3) This device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Part 15 of the FCC Rules. Operation i s subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with t he limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate ra dio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interferenc e to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the eq uipment off and on, the user is encouraged to try to correct th e interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician fo r help. This device and its antenna(s) must not be co-located or operat ion in conjunction with any other antenna or transmitter. Radiation Exposure StatementThe device has been evaluated to meet general RF exposure requi rement. in portable exposure condition without restriction. 03 SpecificationsFunction Model ES-SNG01-W Unit oz / lb: oz / g / ml / fl .oz MeasuringIncrements 0.05oz / 1g / 1ml / 0.1fl .oz Capacity 11lbs / 5000g / 5000ml / 176fl .oz Dimensions 7.48x6.49x0.69inch (190x165x18mm) Weight 1.08lbs Battery 3 * AAA(1.5V) UNIT - TARE 1 2 3 4 5 1. Weighing Platform 2. Digital Display 3. Unit Button 4. Power / Tare Button 5. Battery Compartment 04 1. Press to turn on the scale. Press UNIT to selec t your desired measuring unit, which will display at the top of the screen. a. Weight: Choose between ounces ( " oz " ), both pounds and ounces ( " lb: oz " ), or grams ( " g " ). b. Volume: Choose between milliliters ( " ml " ) or fluid ounce( " fl .oz " ) 2. Optional: If you’re using a container to hold the items or l iquid you’re measuring, first place the empty container on the scale. Press to zero out th e container’s weight. 3. Gently place your item on the scale. The screen will display the weight or volume. 4. Press and hold for 3 seconds to turn off the s cale. Set-Up the ScaleMeasurement 1. Remove the insulation strip of the supplied batteries. 2. Press to turn on the scale. -TARE -TARE -TARE -TARE 05 Tare FunctionWhenever you measure liquid or items inside a container, you ca n use the tare function to remove the container’s weight from the final measurement. UNIT - TARE 1. Place an empty container on the scale. The screen will display the container weight. 2. Press . The screen will now display " 0 " again. UNIT - TARE press -TARE -TARE 06 3. Place liquid or items in the container. The scale will now measure the liquid or items, without the weight of the container.4. When you’re done, reset the scale by removing all weight and pressing . UNIT - TARE Maintenance• Use a sl…

Text truncated - open the document above for the full version.

TIT INTERNATIONAL LIMITED Apr.15, 2021 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2APXUES-SNG01 Model Number: ES-SNG01, ES-SNS01, FT-SNG01, ES-SNG01-W To Whom It May Concern: We, The TIT INTERNATIONAL LIMITED hereby declare that the model : ES-SNS01, FT-SNG01, ES-SNG01-W is identical with the model : ES-SNG01, except the the model names, colors and appearance materials. The test model ES-SNG01 is made of stainless steel materials. Series models ES-SNS01, FT-SNG01, ES-SNG01-W are made of glass materials. Except for the different above, no other modification is performed. Sincerely, Signature: TIT INTERNATIONAL LIMITED Contact person: James Liao

TIT INTERNATIONAL LIMITED Agent Authorization Company: TIT INTERNATIONAL LIMITED Address: MARKET STALL NO.M65 , WO CHE MARKET, WO CHE ESTATE SHATIN, NT, HONG KONG Product Name: Smart Nutrition Scale Model Number(s): ES-SNG01, ES-SNS01, FT-SNG01, ES-SNG01-W Product Description: Smart Nutrition Scale We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021-04-15 Name: James Liao Company: TIT INTERNATIONAL LIMITED

TIT INTERNATIONAL LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021-04-12 Subject; Request for Confidentiality FCC ID: 2APXUES-SNG01 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely TIT INTERNATIONAL LIMITED Contact person: James Liao

External Photos Test Model: ES-SNG01 ALL VIEW OF EUT External VIEW-1 OF EUT External VIEW-2 OF EUT External VIEW-3 OF EUT External VIEW-4 OF EUT External VIEW-5 OF EUT External VIEW-6 OF EUT Series Models: ES-SNS01 ALL VIEW OF EUT Series Models: FT-SNG01 ALL VIEW OF EUT Series Models: ES-SNG01-W ALL VIEW OF EUT

FCC ID Label Location 55mm&35mm FCC ID: 2APXUES-SNG01

Internal Photos Test Model: ES-SNG01 INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT Antenna

RF EXPOSURE EVALUATION 1. PRODUCT INFORMATION Product Description Smart Nutrition Scale Model Name ES-SNG01, ES-SNS01, FT-SNG01, ES-SNG01-W FCC ID 2APXUES-SNG01 2. EVALUATION METHOD According to 447498 D01 General RF Exposure Guidance v06 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. Where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 3. CALCULATION BLE: P t =-1.700dBm=0.676mW The value of the Maximum output power P t is referred to the test report of the CFR47 §15.247. The result for RF exposure evaluation SAR=(0.676mW /5mm) .[√2.402GHz)]= 0.210<3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR. 4. CONCLUSION The SAR evaluation is not required.

Page 1 of 57 FCC Test Report Report No.: AGC09355210312FE02 FCC ID : 2APXUES-SNG01 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Smart Nutrition Scale BRAND NAME : RENPHO MODEL NAME : ES-SNG01, ES-SNS01, FT-SNG01, ES-SNG01-W APPLICANT : TIT INTERNATIONAL LIMITED DATE OF ISSUE : Apr. 12, 2021 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC09355210312FE02 Page 2 of 57 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Apr. 12, 2021 Valid Initial Release Report No.: AGC09355210312FE02 Page 3 of 57 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ............................................................................................................... 4 2. GENERAL INFORMATION ............................................................................................................................ 5 2.1. PRODUCT DESCRIPTION ...................................................................................................................... 5 2.2. TABLE OF CARRIER FREQUENCYS ..................................................................................................... 5 2.3. RELATED SUBMITTAL(S)/GRANT(S) .................................................................................................... 6 2.4. TEST METHODOLOGY ........................................................................................................................... 6 2.5. SPECIAL ACCESSORIES ....................................................................................................................... 6 2.6. EQUIPMENT MODIFICATIONS .............................................................................................................. 6 2.7. ANTENNA REQUIREMENT ..................................................................................................................... 6 3. MEASUREMENT UNCERTAINTY ................................................................................................................. 7 4. DESCRIPTION OF TEST MODES ................................................................................................................. 8 5. SYSTEM TEST CONFIGURATION ............................................................................................................... 9 5.1. CONFIGURATION OF TESTED SYSTEM ............................................................................................... 9 5.2. EQUIPMENT USED IN TESTED SYSTEM .............................................................................................. 9 5.3. SUMMARY OF TEST RESULTS .............................................................................................................. 9 6. TEST FACILITY ........................................................................................................................................... 10 7. PEAK OUTPUT POWER ............................................................................................................................. 11 7.1. MEASUREMENT PROCEDURE ............................................................................................................ 11 7.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................... 11 7.3. LIMITS AND MEASUREMENT RESULT ............................................................................................... 12 8. 6 DB BANDWIDTH ...................................................................................................................................... 14 8.1. MEASUREMENT PROCEDURE ........................................................................................................... 14 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 14 8.3. LIMITS AND MEASUREMENT RESULTS ............................................................................................. 14 9. CONDUCTED SPURIOUS EMISSION ........................................................................................................ 16 9.1. MEASUREMENT PROCEDURE ........................................................................................................... 16 9.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) .................................................................. 16 9.3. MEASUREMENT EQUIPMENT USED .................................................................................................. 16 9.4. LIMITS AND MEASUREMENT RESULT ............................................................................................... 16 10. MAXIMUM CONDUCTED OUTPUT POWER SPECTRAL DENSITY ....................................................... 24 10.1. MEASUREMENT PROCEDURE ......................................................................................................... 24 10.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ................................................................ 24 10.3. MEASUREMENT EQUIPMENT USED ................................................................................................ 24 10.4. LIMITS AND MEASUREMENT RESULT ............................................................................................. 24 11. RADIATED EMISSION ............................................................................................................................... 26 11.1. MEASUREMENT PROCEDURE ......................................................................................................... 26 11.2. TEST SETUP ....................................................................................................................................... 27 11.3. LIMITS AND MEASUREMENT RESULT ............................................................................................. 28 11.4. TEST RESULT ........................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC09355210312FE02 Page 48 of 57 CONDUCTED TEST SETUP Report No.: AGC09355210312FE02 Page 49 of 57 APPENDIX B: PHOTOGRAPHS OF EUT Test Model: ES-SNG01 ALL VIEW OF EUT External VIEW-1 OF EUT Report No.: AGC09355210312FE02 Page 50 of 57 External VIEW-2 OF EUT External VIEW-3 OF EUT Report No.: AGC09355210312FE02 Page 51 of 57 External VIEW-4 OF EUT External VIEW-5 OF EUT Report No.: AGC09355210312FE02 Page 52 of 57 External VIEW-6 OF EUT INTERNAL VIEW-1 OF EUT Report No.: AGC09355210312FE02 Page 53 of 57 INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT Report No.: AGC09355210312FE02 Page 54 of 57 INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT Antenna Report No.: AGC09355210312FE02 Page 55 of 57 Series Models: ES-SNS01 ALL VIEW OF EUT Series Models: FT-SNG01 ALL VIEW OF EUT Report No.: AGC09355210312FE02 Page 56 of 57 Series Models: ES-SNG01-W ALL VIEW OF EUT ----END OF REPORT---- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. The non-CMA report issued by AGC is only permitted to be used by the client as internal reference use and shall not be used for public demonstration purpose. 5. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 6. Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company. 7. The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations. 8.Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing. 9. The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them. 10. Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages.

Test Setup Photos RADIATED EMISSION TEST SETUP BELOW 1GHZ RADIATED EMISSION TEST SETUP ABOVE 1GHZ CONDUCTED TEST SETUP