2APXVK1012CD MP3 Boombox, CD MP3 Boombox with FM LED light show

www.auna-multimedia.com Roadie Sing CD Boombox US-10032056 US- 10032057 US-10032058 ICH BIN EIN BERLINER * * John F. Kennedy on June 26, 1963 in his speech in Berlin, on the occasion of the 15th anniversary of the Berlin Airlift. 3 EN ICH BIN EIN BERLINER * Specifications 4 Warning 5 Warranty 7 Safety Instructions 8 Product Overview 10 Power Sources 12 Radio Operation 13 CD Operation 14 USB Slot Operation 16 AUX IN Operation 16 BT OPERATION 17 LED Light Shows 18 MIC IN (Karaoke) 18 Care and Maintenance 18 Troubleshooting 19 CONTENTS Dear Customer, Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints on installation and use to avoid technical damages. Any failure caused by ignoring the items and cautions mentioned in the operation and installation instructions are not covered by our warranty and any liability. 4 EN SPECIFICATIONS Item number US-10032056 US-10032057, US-10032058 Power supply Power supply Batteries 120 V / 60 Hz 6 x 1.5 V ⎓ (Type C) CD Player Supported audio formatMP3 (MPEG 1 Audio Layer-3) FM Radio Tuning range87.5 MHz - 108 MHz Input AUDIO IN Stereo mini jack OutputStereo mini jack For 16 ohm - 32 ohm impedance headphones Made in China Berlin Brands Group Inc. 101 Montgomery Street, Suite 2050 in San Francisco, CA 94104 www.berlin-brands-group.com 5 EN WARNING CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE ANY COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. Triangle with lightning plus explanation as follows: DANGEROUS VOLTAGE: The lightning fl ash with arrowhead symbol within the equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of suff icient magnitude to constitute a risk of electric shock to persons. Triangle with exclamation point plus explanation as follows: ATTENTION: The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying this product. CAUTION To reduce the risk of electric shock do not use this plug with an extension cord, receptacle or other outlet. Ventilation Warning: Do not block any ventilation openings by situating the product on a bed, sofa or similar surface that may block the ventilation openings; or place in built-in installation. The product should be situated so that its location or position does not interfere with its proper ventilation. 6 EN FCC Warning: This equipment may generate or use radio frequency energy. Changes or modifi cations to this equipment may cause harmful interference unless the modifi cations are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modifi cation is made. This device has been tested and found to comply with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) the device may not cause harmful interference and (2) the device must accept any interference received, including interference that may cause undesired operation. These FCC rules are designed to provide reasonable protection against harmful interference in a residential installation. PRODUCT COMPLIES WITH DHHS RULES 21 CFR Chapter I, SUBCHAPTER J DANGER Invisible laser radiation can cause serious personal injury when open and if the interlock fails or is defeated! Avoid direct exposure to beam. Use of controls or adjustments other than those specifi ed herein may result in hazardous radiation exposure and serious personal injury. 7 EN WARRANTY Berlin Brands Group (the “Company”) warrants to the original retail purchaser of this Product that should this Product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within twelve (12) months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned Product (at the sole discretion of the Company) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the Product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the address provided herein This warranty, as set forth above, may be extended for an additional six (6) months for a total warranty period of up to eighteen (18) months by registering the Product with the Company. In order to register the Product, the original retail purchaser must complete and return the registration documents provided along with the Product to the Company or register online at www.auna-multimedia.com/warranty within ninety (90) days of the days of the original purchase. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES OR LIABILITIES. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other t…

Text truncated - open the document above for the full version.

Rev 11/20/07 DONG GUAN JENMART INDUSTRIAL INVESTMENT CO., LTD Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2APXVK1012 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit TypeFile Name Block Diagram Schematics Operational Description Block SCH Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, We also requesting the commission to grant short-term confidentiality request on the following attachments until180 days after the Grant Date of Equipment Authorizations. Exhibit TypeFile Name ManualUser manual Sincerely, Blake Li 2020-12-10

DONG GUAN JENMART INDUSTRIAL INVESTMENT CO., LTD Declaration on model difference We the undersigned hereby confirm that these models are identical, and all models have the same RFmodule and antenna, PCB layout , schematics and component.Only different on model number and color of appearance. Production nameTrademarkFCCModel no. CD MP3 Boombox, CD MP3 Boombox with FM LED light show N/A2APXVK1012K1011, K1011C, K1011D, K1011K, B29, K1011XX, K1012, US-10032056, US-10032057, US-10032058, K1012XX, Roadie Confirmed by: Blake Li 2020-12-10

DONG GUAN JENMART INDUSTRIAL INVESTMENT CO., LTD Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2020-12-10 SUBJECT: FCC Application for (FCC ID: 2APXVK1012) To Whom It May Concern: We, the undersigned, hereby authorize EMTEK (DONGGUAN) CO., LTD. at Sam Lvon our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by EMTEK (DONGGUAN) CO., LTD.on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Sincerely, Blake Li 2020-12-10

FCCID:2APXVK1012

FCCID:2APXVK1012 ANT

RFEXPOSUREEVALUATION EUTSpecification EUTCDMP3Boombox,CDMP3BoomboxwithFMLEDlight show ModelNumberK1011,K1011C,K1011D,K1011K,B29,K1011XX,K1012, US-10032056,US-10032057,US-10032058,K1012XX, Roadie FCCID2APXVK1012 Antennagain(Max)0dBi OperationFrequency2402-2480MHz PowerSupplyAC120V/60Hz ClassificationPer StipulatedTestStandard §15.247(i),§2.1093 KindofDevice:BluetoothVer.5.0 ModulationGFSK,π/4-DQPSK,8DPSK Max.outputpower0.23dBm(0.001054W) TestRequirement: Accordingto§15.247(i)and§1.1307(b)(1),systemsoperatingunderthe provisionsofthissectionshallbeoperatedinamannerthatensuresthatthe publicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission’sguidelines. RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualityforTCBapproval. OneantennaisavailablefortheEUT.Theminimumseparationdistanceis 5mm. BTDSS: Transmit Frequency (MHz) Mode Measure dPower (dBm) Tune upPower (dBm) Maxtuneup power(dBm) Calculation Result 1-g SAR 2.402GFSK 0.23 0±11 0.3902263 3 2.441GFSK -1.89 -1±10 0.3124100 3 2.480GFSK-2.81-2±1-10.25018193 2.402 π/4-DQ PSK -0.320±110.39022633 2.441 π/4-DQ PSK -0.790±110.39338153 2.480 π/4-DQ PSK -1.62 -1±10 0.3149603 3 2.4028DPSK -0.27 0±11 0.3902263 3 2.4418DPSK -0.73 0±11 0.3933815 3 2.4808DPSK-1.40-1±100.31496033 AccordingtoKDB447498,nostand-alonerequiredforBTantenna,andno simultaneousSARmeasurementisrequired. Signature: SamLv Date:2020-12-10

Report No. ES201021053WPage 1 of 84 Ver.1.0 TEST REPORT Product Name ： CD MP3 Boombox, CD MP3 Boombox with FM LED light show Model Number ： K1011, K1011C, K1011D, K1011K, B29, K1011XX, K1012, US-10032056, US-10032057, US-10032058, K1012XX, Roadie FCC ID ： 2APXVK1012 Prepared for:DONG GUAN JENMART INDUSTRIAL INVESTMENT CO., LTD. Address:No.1203,Tower A, Wan Ying Building, Peng Temple Bridge, Shi Mei Community, Wan Jiang Area, Dong Guan City Prepared by:EMTEK (SHENZHEN) CO., LTD. Address:Building 69, Majialong Industry Zone, Nanshan District, Shenzhen, Guangdong, China Tel: (0755) 26954280 Fax: (0755) 26954282 Report Number:ES201021053W Date(s) of Tests:October 21, 2020 to November 07, 2020 Date of issue:November 07, 2020 Report No. ES201021053WPage 2 of 84 Ver.1.0 VERIFICATION OF COMPLIANCE Applicant:DONG GUAN JENMART INDUSTRIAL INVESTMENT CO., LTD. No.1203,Tower A, Wan Ying Building, Peng Temple Bridge, Shi Mei Community, Wan Jiang Area, Dong Guan City Manufacturer:Dongguan City Wangniudun Yinghui Electronics Factory Chijiaoluduan Zhenzhong Road, Wangniudun Town,Dongguan City, China Factory:Dongguan City Goldfield Technology Co., Ltd. No.28 Lingxia Road, Qiaotou Town, Dongguan City, GuangDong Province, China Product Description:CD MP3 Boombox, CD MP3 Boombox with FM LED light show Trade Mark:auna, BRAND Model Number: K1011, K1011C, K1011D, K1011K, B29, K1011XX, K1012, US-10032056, US-10032057, US-10032058, K1012XX, Roadie (Note: The models are the same except color of appearance and model number, here we prepare K1012 for the all test) We hereby certify that: The above equipment was tested by EMTEK(SHENZHEN) CO., LTD. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.10-2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits of FCC Rules Part 15.247(2018). Date of Test: October 21, 2020 to November 07, 2020 Prepared by: Loren Luo /Editor Reviewer: Tim Dong /Supervisor Approved & Authorized Signer : Lisa Wang /Manager Report No. ES201021053WPage 3 of 84 Ver.1.0 Modified Information VersionSummaryRevision DateReport No. Ver.1.0Original Report/ES201021053W Report No. ES201021053WPage 4 of 84 Ver.1.0 Table of Contents 1. GENERAL INFORMATION.................................................................................................................6 1.1 PRODUCTDESCRIPTION......................................................................................................................................6 1.2 TESTMETHODOLOGY..........................................................................................................................................6 1.3 TESTFACILITY......................................................................................................................................................7 2. SYSTEM TEST CONFIGURATION......................................................................................................8 2.1EUT CONFIGURATION...........................................................................................................................................8 2.2 EUT EXERCISE.............................................................................................................................................8 2.3 TESTPROCEDURE.............................................................................................................................................8 2.4CONFIGURATION OFTESTEDSYSTEM.................................................................................................................9 3. SUMMARY OF TEST RESULTS.........................................................................................................10 4. DESCRIPTION OF TEST MODES......................................................................................................11 5. TEST SYSTEM UNCERTAINTY.........................................................................................................12 6. CONDUCTED EMISSIONS TEST.......................................................................................................13 6.1MEASUREMENTPROCEDURE:............................................................................................................................13 6.2 TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)..................................................................................13 6.3MEASUREMENTEQUIPMENTUSED:...................................................................................................................13 6.4 MEASUREMENTRESULT:...................................................................................................................................14 6.5 CONDUCTEDMEASUREMENTPHOTOS:............................................................................................................17 7. RADIATED EMISSION TEST...............................................................................................................18 7.1MEASUREMENTPROCEDURE..............................................................................................................................18 7.2TESTSET-UP (BLOCKDIAGRAM OFCONFIGURATION)...................................................................................20 7.3 MEASUREMENTEQUIPMENTUSED:..................................................................................................................21 7.4 RADIATEDEMISSIONLIMIT................................................................................................................................22 7.5 MEASUREMENTRESULT..................................................................................................................................23 7.5 RADIATEDMEASUREMENTPHOTOS:.........................................................................................................…

Text truncated - open the document above for the full version.

FCCID:2APXVK1012