2AQ2S-KP2-NAVehicle Recorder

smartwitness.com KP2 Video Telematics Camera USER GUIDE V1.0.0 WARNING:SmartWitness installations should be performed by a qualified indivi dual or installation professional only. Working with a vehicle's power system can be dangerous to both you and your vehicle. This installation is intended only to be a guide since vehicle designs and power/input sources can vary significantly from vehicle to vehicle. If you need to schedule a professional installation service in the USA for your SmartWitness device(s), please visit smartwitness.com/request-installand submit the online form. 2 SAFETY ADVICE & FCC GPS RECEPTION CONTENTS INTRODUCTION FINCTIONS LEDS &BUZZER SPECIFICATION Installation CONFIGURATION TOOL USER GUIDE INITIALIZE SD CARD DEVICE SETTINGS RECORD SETTINGS EVENT SETTINGS SYSTEM SETTINGS NETWORK SETTINGS DMS5 SETTINGS SOFTWARE USER GUIDE PC VIEWER SOFTWARE SETTINGS OPEN THE SD CARD OPEN FILES PLAYBACK DRIVE DATA TRACKING MAP EVENT SEARCH PRIVACY SETTINGS SAVE JPEG AND AVI FILE PRINT IMAGE BACKING UP FILES BACKUP DATA LIST AND EXPORT SPECIFICATION APPENDIX RECORDING TIME TABLE APPENDIX UPGRADE TECHNICAL SUPPORT AND WARRANTY Optional Item INDEX 3 4 5 6 9 11 12 13 15 16 17 19 21 22 23 24 26 27 28 29 31 32 33 34 35 36 37 38 39 40 41 42 43 3 SAFETY ADVICECE &UKCA & FCC CE & UKCA Hereby, SmartWitness USA LLC declares that the radio equipment type KP2-GB is in compliance with Directive 2014/53/EU and with the relevant UK statutory requirements. The full text of the EU and UKCA declaration of conformity is available at the following internet address : https://www.smartwitness.com/ FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved b y the manufacturer may void the user's authority to operate the equipment FCC RF Radiation Exposure Statement: This equipment complies with FCC RF Radiation expo sure limits set forth for an uncontrolled environment. This device and its antenna must not be co-locate d or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. 4 SAFETY ADVICE Caution Damages due to production malfunction, loss of data, or other damages occurring while using this product shall not be the responsibility of the manufacturer. Although the product is a device used for recording videos, the product may not save all videos in the case of a malfunction. In the case of an accident, the sensor may not recognize the shock when the impact is light and as a result it may not begin recording automatically. SAFETY ADVICE CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Caution Install the product where it does not block driver’s visibility and where there is no airbag installed. This could cause an accident or might injure passengers in case of accident Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Battery for RTC(Real Time Clock) inside 5 GPS RECEPTION 1. Activate the product in an area without large buildings to improve GPS reception. 2. The temperature range for optimum operation of the GPS receiver in your car is -10 ~ 50 ° C. 3. When using the product for the first time or after a long period (more than three days), it may take a little longer to recognize your current location. It may take between five and thirty minutes to get GPS reception. GPS reception may be impaired under the following circumstances 1) If there is an object at the end of the GPS antenna 2) If your vehicle has metallic elements on the windshields 3) If equipment generating electromagnetic waves that interfere with the GPS signal is installed in the vehicle e.g.: Other GPS devices such as a certain type of wireless activated alarms, MP3 and CD players and camera alarms using GPS. 4) If you are using a receiver connected by cable, electric interference can be avoided by simply changing the location of the receiver (antenna). 5) On heavily overcast or cloudy days, if the vehicle is in a covered location such as under a bridge or raised roadway, in a tunnel, an underground roadway or parking area, inside a building or surrounded by high-rise buildings. 6) If GPS signal reception is poor, it may take longer to locate your current position when the vehicle is moving than when it is stationary. The commercial purpose GPS has the average range error of more than 15 meters and the range error could be more than 100 meters due to environmental conditions like buildings, roadside trees etc. 6 CONTENTS KP2 Vehicle Recorder Sticker for Windscreen mounting (One adhered to bracket, one extra pc) Bracket & Wiring Harness Alcohol Prep pad (x2) Zip ties & adhesive tie-downs (x5) TorxScrewdriver Micro SD Card 7 INTRODUCTION FRONT SIDE Camera Lens Lens Stopper Bracket Need to unscrew to remove the whole unit from the bracket or change the IR camera angle or insert/remove SIM/SD. No need to unscrew Applied screws for design purpose only. 8 INTRODUCTION After the side cover open NANO SIM Slot Micro SD Memory Card Slot 2 nd Camera BACK Record LED Blue LED Communication LED Green LED Warning LED Red LED Ecall Button Bluetooth Pairing Button 9 INTRODUCTION POWER CABLE Black (Ground (-)) Red (Power Battery +) White (Power IGN + ) Green (RX) Yellow (TX) External Panic Button (optional Item) Power Specifications Input: DC 12/24V, 1.5A 2A Automotive Blade Fuse inside 10 FUNCTIONS Automatic Booti…

Text truncated - open the document above for the full version.

Phone: 312.981.8774 Web: www.smartwitness.com 1016 Lunt Avenue Schaumburg, IL 60193 © Copyright 2021 SmartWitness USA, LLC. CONFIDENTIAL Regarding FCC ID: 2AQ2S-KP2-NA To whom it may concern: We, the undersigned, hereby authorize SGS Korea Co., Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with SmartWitness USA, LLC. This authorization is valid until further written notice from the applicant. Name: Chris Pflanz Title: Vice President, Technology Signature: On behalf of Company: SmartWitness USA, LLC Telephone: (312) 891-8774 August 6, 2021 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046

Applicant Declaration Applicant Declaration Rev:0.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name SmartWitness USA, LLC Address 1016 Lunt Avenue Schaumburg, IL 60193 United States Grantee Code 2AQ2S FCC ID 2AQ2S-KP2-NA Authorized Contact Name Chris Pflanz Contact Email [email protected] Contact Phone (312) 891-8774 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature: Date: 2021.08.06 Print Name: Chris Pflanz Title: Vice President, Technology *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Phone: 312.981.8774 Web: www.smartwitness.com 1016 Lunt Avenue Schaumburg, IL 60193 © Copyright 2021 SmartWitness USA, LLC. CONFIDENTIAL Regarding: Confidentiality Request regarding application for FCC ID : 2AQ2S-KP2-NA To whom it may con LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Chris Pflanz Vice President, Technology SmartWitness USA, LLC August 6, 2021 TO: Federal Communication Commission Equ ipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046

EUT_Front EUT_Rear

FCC ID : 2AQ2S-KP2-NA

Battery KP2-NA CCD Board 1_Fro nt CCD Board 1_Rear CCD Board 2_Fro nt CCD Board 2_Rear Cradle Board _Fro nt Cradle Board _Rear LTE Main Antenna LTE Sub Antenna Main Board_Front Main Board_ Rear Sub Board_Front Sub Board_ Rear Wireless Module Micro SD Card_Front Micro SD Card_ Rear

Test Report No.:F690501-RF-EMC000023 Page : 2 of 13 EMH7081-01A(2021.04.09)(1) A4(210mm*297mm) Contents 1. General Information .................................................................................................. 4 1.1 Client Information ................................................................................................ 4 1.2 Test Laboratory ................................................................................................... 4 1.3 General Information of E.U.T. ............................................................................. 4 1.4 Operating Modes and Conditions ....................................................................... 5 1.5 Peripheral Equipments ....................................................................................... 5 1.6 Cable List ............................................................................................................ 5 1.7 System Configurations ........................................................................................ 5 1.8 Test System Layout ............................................................................................ 6 1.9 Modifications ....................................................................................................... 6 1.10 Applicable Standards for Testing ...................................................................... 6 1.11 Summary of Test Results ................................................................................. 6 2. Emission Test ............................................................................................................ 7 2.1 Test Results ........................................................................................................ 7 2.2 Test Method and Limits ...................................................................................... 7 2.2.1 Test Method ............................................................................................... 7 2.2.2 Test Limits ................................................................................................. 7 2.3 Radiated Emission .............................................................................................. 8 2.3.1 Test Equipments ........................................................................................ 8 2.3.2 Test Site ..................................................................................................... 8 2.3.3 Environment Conditions ............................................................................. 8 2.3.4 Test Results ............................................................................................... 9 Appendix A : Measurement Uncertainty ...................................................................... 13 Test Report No.:F690501-RF-EMC000023 Page : 3 of 13 EMH7081-01A(2021.04.09)(1) A4(210mm*297mm) Revision History Revision Report number Description 0 F690501-RF-EMC000023 Initial Test Report No.:F690501-RF-EMC000023 Page : 4 of 13 EMH7081-01A(2021.04.09)(1) A4(210mm*297mm) 1. General Information 1.1 Client Information Applicant SmartWitness USA, LLC Applicant Address 1016 Lunt Avenue Schaumburg, IL 60193 United States Manufacturer D-TEG Co., Ltd Manufacturer Address 3F, Jungmin Bldg, 53 Maewha-ro, Bundang-gu, Seongnam, Gyeonggi-do 13505, Korea Factory DaWoo Telecom Co., Ltd Factory Address #57, Gunpocheomdansaneop 2-ro, Gunpo-si, Gyeonggi-do, Korea 1.2 Test Laboratory Name and Address SGS Korea Co., Ltd. - Giheung 1 Laboratory 35, Giheungdanji-ro 121beon-gil, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea - Giheung 2 Laboratory 23, Giheungdanji-ro 24beon-gil, Giheung-gu, Yongin-si, Gyeonggi-do, Republic of Korea FCC Registration No. KR0150 IC Registration No. 7837B Phone + 82 31 548 0710 Fax + 82 31 548 0719 e-mail [email protected] 1.3 General Information of E.U.T. Classification Specification Product Name Vehicle Recorder Model Name KP2-NA Alt. Model Name KP2, KP2-VZ, KP2-DFC, KP2-NA-64, KP2-NA-DFC-64, KP2-VZ-64, KP2-VZ-DFC-64, KP2-NA-128, KP2-NA-DFC-128, KP2-VZ-128, KP2-VZ-DFC-128 Model Differences KP2 Printed sentence on appearance is different. KP2-VZ KP2-DFC KP2-NA-64 Printed sentence on appearance and inboxed Micro SD card capacity are different.(Micro SD Card 64GB) KP2-NA-DFC-64 KP2-VZ-64 KP2-VZ-DFC-64 KP2-NA-128 Printed sentence on appearance and inboxed Micro SD card capacity are different.(Micro SD Card 128GB) KP2-NA-DFC-128 KP2-VZ-128 KP2-VZ-DFC-128 Serial No HQNA62100119 EMI Classification Class B Test Power DC 12 V , DC 24 V Rated Power DC 12 / 24 V , 1.5 A Internal Clock Freq. 2.4 ㎓ Operating Temperature - 10 ~ + 55 °C H/W Version 1.0.0 S/W Version 1.0.0 Port Power Cable(DC IN, TX(Administrator), RX(Administrator)), Micro 5 pin USB(Administrator), USIM slot, MicroSD card slot Function It is a vehicle recorder that equipped with Bluetooth, Wi-Fi, LTE, GPS functions and recording video in microSD card Test Report No.:F690501-RF-EMC000023 Page : 5 of 13 EMH7081-01A(2021.04.09)(1) A4(210mm*297mm) 1.4 Operating Modes and Conditions Operating mode Operating Condition 1) Camera + MicroSD card + LTE FDD5 attached _ DC 12 V It was status that received DC 12 V power through car battery and recorded the video in the SD CARD. And the EUT is on connecting status of the LTE FDD 5 by using CMW500 at the same time. 2) Camera + MicroSD card + LTE FDD5 attached _ DC 24 V It was status that received DC 24 V power through car battery and recorded the video in the SD CARD. And the EUT is on connecting status of the LTE FDD 5 by using CMW500 at the same time. 1.5 Peripheral Equipments Description Model Serial No. Manufacturer Car Battery1 Car battery GB40R - Car Battery2 Car battery GB40R - USIM card - - - 1.6 Cable List Start END Cable Spec. Used core Name I/O Port Name I/O Port Length (m) Shield < Test Mode 1 > EUT DC IN Car Battery1 DC OUT 5.0 Unshield No USIM slot USIM - - - - Micro SD card slot Micro SD card - - - - - Wideband…

Text truncated - open the document above for the full version.

RE( Below 1 ㎓ )_Front RE( Below 1 ㎓ )_Rear RE( Above 1 ㎓ )_Front RE( Above 1 ㎓ _Rear