2AQ5RWIFIAP6275PWIFI Module

Shenzhen KTC Commercial Display Technology CO.,LTD. WIFI Module Model Number: PW.2.12004.0002 Product Descrition： The AMPAK Technology® AP6275P is a fully Wi-Fi and Bluetooth functionalities module with seamless roaming capabilities and advance security, also it could interact with different vendors’ 802.11a/b/g/n/ac/ax 2x2 Access Points with MIMO standard and can accomplish up to speed of 1200Mbps with dual stream in 802.11ax to connect the wireless LAN. Furthermore AP6275P included PCIe interface for Wi-Fi, UART/ PCM interface for Bluetooth. In addition, this compact module is a total solution for a combination of Wi-Fi + BT technologies. The module is specifically developed for tablet, OTT box and portable devices. Product Specification General Specification 2.4GHz RF Specification Shenzhen KTC Commercial Display Technology CO.,LTD. 5GHz RF Specification Bluetooth Specification NOTICE: ◆please keep this product and accessories attached to the places which children can't touch; ◆do not splash water or other liquid onto this product, otherwise it may cause damage; ◆do not put this product near the heat source or direct sunlight, otherwise it may cause deformation or malfunction; ◆please keep this product away from flammable or naked flame; ◆please do not repair this product by yourself. Only qualified personnel can be repaired. FCC Statement - List of applicable FCC rules This device complies with FCC part 15C : 15.247&15.407 - Summarize the specific operational use conditions This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. And the module should be installed at a minimum distance of 20 cm away from person nearby. The host product manufacturer should state this information to the host instruction manual. Shenzhen KTC Commercial Display Technology CO.,LTD. - Trace antenna designs Not applicable. - RF exposure considerations This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This modular must be installed and operated with a minimum distance of 20 cm between the radiator and user body. - Antennas Antenna Type: External Antenna Antenna Gain: 2.4G WIFI：2.06 dBi 5.2G WIFI：1.67 dBi 5.3G WIFI：1.75 dBi 5.6G WIFI：2.95 dBi 5.8G WIFI：1.55dBi BT: ：2.06 dBi - Label and compliance information This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: 2AQ5RWIFIAP6275P Or Contains FCC ID: 2AQ5RWIFIAP6275P”. - Information on test modes and additional testing requirements Shenzhen KTC Commercial Display Technology CO.,LTD. Any final host product with the modular transmitter installed should be under test according to guidance given in KDB 996369 D04. To enter test mode for module, RFTestTool.apk test software and adb command is necessary. When something wrong happens in configuring test modes for host product with module, host product manufacturer should coordinate with module manufacturer for technical support. It is recommended that some investigative measurements should be taken to confirm that host product with module installed does not exceed the spurious emissions limits or band edge limits. - Additional testing, Part 15 Subpart B disclaimer The modular transmitter is only FCC authorized for the specific rule parts (FCC Part 15.247&15.407) list on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed when contains digital circuity. Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée a…

Text truncated - open the document above for the full version.

1(1) [Shenzhen KTC Commercial Display Technology CO.,LTD. ] [April 23, 2021] Attention: Application Examiner RE: Request for Confidentiality Applicant: [Shenzhen KTC Commercial Display Technology CO.,LTD. ] FCC ID: [2AQ5RWIFIAP6275P] To Whom It May Concern: Permanent Confidentiality [Complete this section if permanent confidentiality is requested] Request is hereby submitted by [Shenzhen KTC Commercial Display Technology CO.,LTD. ] to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: Schematics Detailed Block Diagrams Detailed Operational/Functional Description Rationale for request for confidentiality: [Shenzhen KTC Commercial Display Technology CO.,LTD. ] has invested considerable time and materials in research and development to produce the referenced product. [Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us.] [Short term confidentiality: Disclosure of the short-term confidential portions of this application during the period of importation and/or distribution would reveal key aspects of proprietary technology to competitors and diminish the value of our investment in research and development.] If you have questions or need further information, please contact the undersigned. Sincerely, [Signature] [Hongbo Tang] [Certificaation Engineer] [Shenzhen KTC Commercial Display Technology CO.,LTD. ]

Shenzhen KTC Commercial Display Technology CO.,LTD. FCC ID: 2AQ5RWIFIAP6275P To the certification reviewer: We are hereby applying for full modular approval of the above-referenced FCC ID, based on compliance with all of the criteria as detailed below. Sincerely, [signature] [Hongbo Tang] [Certification Engineer] Part 15 Unlicensed Single Modular Transmitter Approval Justification per 15.212 Requirement per 15.212 reference (i)The radio elements of the modular transmitter must have their own RF shielding. Shielding is provided by a metal cover over the circuitry. (ii)The modular transmitter must have buffered modulation/data inputs (if such inputs are provided. All modulation and data inputs are buffered by circuitry on the transmitter chip. (iii)The modular transmitter must have its own power supply regulation. Power supply regulation is provided by circuitry on the transmitter chip. (iv)The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna is connected to the module with the means of unique coupling . (v)The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with Part 15 parameters. Testing was performed with the module extended outside of the host on a special extender board, as shown in the test setup photos. (vi)The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. If the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. A sample of the host label is provided as an exhibit, showing the FCC identifier of the module. (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The module complies fully with the operating requirements of Part 15 section C &E as demonstrated in the test report exhibit. (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Yes, Please see the MPE report, the modular meets MPE calculation of 47 CFR 1.107 (b)(1).

Page 1 of 2 FCC ID: 2AQ5RWIFIAP6275P IC: 24301-WIFIAP6275P Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng Science and Technology Park, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 2 FCC ID: 2AQ5RWIFIAP6275P IC: 24301-WIFIAP6275P Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng Science and Technology Park, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

48mm 73mm WIFIAP6275P FCC ID:2AQ5RWIFIAP6275P IC:24301-WIFIAP6275P Model No:PW.2.12004.0002 Label Location

Page 1 of 3 FCC ID: 2AQ5RWIFIAP6275P IC: 24301-WIFIAP6275P Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng Science and Technology Park, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 3 FCC ID: 2AQ5RWIFIAP6275P IC: 24301-WIFIAP6275P Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng Science and Technology Park, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo Page 3 of 3 FCC ID: 2AQ5RWIFIAP6275P IC: 24301-WIFIAP6275P Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng Science and Technology Park, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com EUT Photo EUT Photo

Page 2 of 20 Report No.: 21011800RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 Version Version No. Date Description V1.0 May 6, 2021 Original Page 3 of 20 Report No.: 21011800RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 5 1.4 OTHER INFORMATION ......................................................................................................................................... 8 1.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................................................... 9 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 9 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 9 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 9 2. EQUIPMENT LIST .................................................................................................................................................. 10 3. MPE EVALUATION ................................................................................................................................................. 11 3.1 REFERENCE DOCUMENTS FOR EVALUATION ...................................................................................................... 11 3.2 MPE COMPLIANCE REQUIREMENT ................................................................................................................... 11 3.2.1 LIMITS ................................................................................................................................................. 11 3.2.2 TEST PROCEDURE ............................................................................................................................... 12 3.3 MPE CALCULATION METHOD ........................................................................................................................... 12 3.4 MPE CALCULATION RESULTS .......................................................................................................................... 12 3.4.1 FOR WLAN ......................................................................................................................................... 12 3.4.2 FOR BT ............................................................................................................................................... 18 3.4.3 SIMULTANEOUS MULTI-BAND TRANSMISSION MPE ANALYSIS .................................................................. 19 APPENDIX 1 PHOTOS OF TEST SETUP ..................................................................................................................... 20 APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS ................................................................................. 20 Page 4 of 20 Report No.: 21011800RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 1. GENERAL INFORMATION 1.1 CLIENT INFORMATION Applicant: Shenzhen KTC Commercial Display Technology CO.,LTD. Address of Applicant: No.4023, Northern Wuhe Road, Bantian Street, Longgang District, Shenzhen City, Guangdong Province, P.R.China Manufacturer: Shenzhen KTC Commercial Display Technology CO.,LTD. Address of Manufacturer: No.4023, Northern Wuhe Road, Bantian Street, Longgang District, Shenzhen City, Guangdong Province, P.R.China 1.2 EUT INFORMATION Product Name: WIFI Module Model No. / HVIN: PW.2.12004.0002 Add. Model No. / HVIN: N/A Trade Mark: Prowise DUT Stage: Identical Prototype 2.4 GHz ISM Band: IEEE 802.11b/g/n/ax Bluetooth 5.0 5 GHz U-NII Bands: 5 150 MHz to 5 250 MHz IEEE 802.11a/n/ac/ax 5 250 MHz to 5 350 MHz IEEE 802.11a/n/ac/ax 5 470 MHz to 5 725 MHz IEEE 802.11a/n/ac/ax 5 725 MHz to 5 850 MHz IEEE 802.11a/n/ac/ax Software Version: 1.0.28 Hardware Version: A1 Sample Received Date: January 20, 2021 Sample Tested Date: March 11, 2021 to April 10, 2021 Page 5 of 20 Report No.: 21011800RFC-5 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS102-V1.1 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD For BT_LE Frequency Band: 2400 MHz to 2483.5 MHz Frequency Range: 2402 MHz to 2480 MHz Bluetooth Version: Bluetooth LE/2LE Type of Modulation: GFSK Number of Channels: 40 Channel Separation: 2 MHz Antenna Type: External Antenna…

Text truncated - open the document above for the full version.

Page 2 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 Version Version No. Date Description V1.0 May 6, 2021 Original Page 3 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 PRODUCT SPECIFICATION SUBJECTIVE TO THIS STANDARD ................................................................................. 4 1.4 OTHER INFORMATION ......................................................................................................................................... 6 1.5 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 6 1.6 TEST LOCATION ................................................................................................................................................. 7 1.7 TEST FACILITY ................................................................................................................................................... 7 1.8 DEVIATION FROM STANDARDS ............................................................................................................................ 7 1.9 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 7 1.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 7 1.11 MEASUREMENT UNCERTAINTY ........................................................................................................................... 8 2. TEST SUMMARY ...................................................................................................................................................... 9 3. EQUIPMENT LIST .................................................................................................................................................. 10 4. TEST CONFIGURATION ........................................................................................................................................ 11 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ...................................................................................................... 11 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................. 11 4.1.2 RECORD OF NORMAL ENVIRONMENT..................................................................................................... 11 4.2 TEST CHANNELS ............................................................................................................................................. 12 4.3 EUT TEST STATUS .......................................................................................................................................... 12 4.4 PRE-SCAN ....................................................................................................................................................... 13 4.5 TEST SETUP .................................................................................................................................................... 14 4.5.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 14 4.5.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 15 4.5.3 FOR CONDUCTED RF TEST SETUP ........................................................................................................ 16 4.6 SYSTEM TEST CONFIGURATION ........................................................................................................................ 17 4.7 DUTY CYCLE ................................................................................................................................................... 18 5. RADIO TECHNICAL REQUIREMENTS SPECIFICATION .................................................................................... 23 5.1 REFERENCE DOCUMENTS FOR TESTING ............................................................................................................ 23 5.2 ANTENNA REQUIREMENT ................................................................................................................................. 23 5.3 26 DB BANDWIDTH & OCCUPIED BANDWIDTH ................................................................................................... 24 5.4 6 DB BANDWIDTH & OCCUPIED BANDWIDTH ..................................................................................................... 49 5.5 MAXIMUM CONDUCTED OUTPUT POWER OR E.I.R.P ............…

Text truncated - open the document above for the full version.

Page 32 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11n-HT40 Chain 0 Chain 1 Channel 38 Channel 46 Channel 54 Page 33 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11n-HT40 Chain 0 Chain 1 Channel 62 Channel 102 Channel 110 Page 34 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11n-HT40 Chain 0 Chain 1 Channel 134 Page 35 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ac-VHT20 Chain 0 Chain 1 Channel 36 Channel 44 Channel 48 Page 36 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ac-VHT20 Chain 0 Chain 1 Channel 52 Channel 60 Channel 64 Page 37 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ac-VHT20 Chain 0 Chain 1 Channel 100 Channel 116 Channel 140 Page 38 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ac-VHT40 Chain 0 Chain 1 Channel 38 Channel 46 Channel 54 Page 39 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ac-VHT40 Chain 0 Chain 1 Channel 62 Channel 102 Channel 110 Page 40 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ac-VHT40 Chain 0 Chain 1 Channel 134 Page 41 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ac-VHT80 Channel 42 Channel 58 Channel 106 Page 42 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ax20 Chain 0 Chain 1 Channel 36 Channel 44 Channel 48 Page 43 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ax20 Chain 0 Chain 1 Channel 52 Channel 60 Channel 64

Page 44 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ax20 Chain 0 Chain 1 Channel 100 Channel 116 Channel 140 Page 45 of 199 Report No.: 210118001RFC-4 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-RF-RSS247-V1.1 IEEE 802.11ax40 Chain 0 Chain 1 Channel 38 Channel 46 Channel 54 Page 46 of 199 Report No.: 210118001RFC-4 S…

Text truncated - open the document above for the full version.