2AQA6-H6114AGovee RGB Car LED Strip Light

)霹僈⛼ 晜劥 俱〿 䫔〜㽯㼄–NN 㾝䒓㽯㼄–NN 勞餘(⛼곜紺 䊨蒌支蒀皮ⵘ 䫔〜倰䒭낏끩ꛐ RGB Car LED Strip Lights Model: H6114 User Manual English01 Deutsch05 Français09 Español 13 Italiano17 傈劥铃 21 English At a Glance Length Lighting Color Power Supply Voltage Control Method Working Temperature 4 × 22cm (4 × 0.72ft) RGB Car Cigarette Lighter 12V App via Bluetooth &Control Box -10°C - 45°C (14°F - 113°F) 6SHFLȴFDWLRQV LED Strip Light Control Box Car Cigarette Lighter User Manual 4 1 1 1 01 Ԯ Preparation Before Installing ΖQVWDOOLQJ<RXU6WULS/LJKWV 02 a. b. Unpack the box and check all items listed in the packing list. Power on the strip lights and check whether they light up. a. b. c. d. e. Wipe the installing surface to make sure it's clean and smooth. Install the cigarette lighter and control box in the central console. Peel o the protective lm and stick the strip lights as indicated in the picture. Firmly press the strip from end to end and reinforce ends of the strip with zip ties and screws. Insert the cigarette lighter into the socket and press the button on it. The button will light on, indicating the strip light is powered on. Back seat Front Seat Cigarette lighter Steering wheel Screw Fixing Hole ԯ Installing Steps 03 &RQWUROOLQJZLWKWKH&RQWURO%R[ 2Q2΍ Color Changing Music Mode/ Brightness Adjusting ButtonFunction Turn the light on/o. Press to cycle through 9 colors. Press to enter music mode. Press and hold to cycle through 6 brightness levels. On/O Color Changing Music Mode/Brightness Adjusting 'RZQORDGLQJWKH*RYHH+RPH$SS Download the Govee Home app from App Store (iOS devices) or Google Play (Android devices). Notice: You need a smartphone running iOS 9.3 (or above) or Android 4.4 (or above). 04 Govee Home &XVWRPHU6HUYLFH Warranty: 12-Month Limited Warranty Support: Lifetime Technical Support Email: [email protected] Ocial Website: www.govee.com @Govee @Govee @Goveeocial @Govee &RQQHFWLQJWKH6WULS/LJKWVWRWKH$SS Ԯ ԯ ԰ Turn on Bluetooth in your mobile phone. Open Govee Home app and tap “+” icon in the top right corner. Select “H6114” in the device list. Deutsch Überblick Länge Beleuchtungsfarbe Netzteil Stromspannung Kontrollweg Arbeitstemperatur 4 × 22cm / 4 × 0.72ft RGB Auto Zigarettenanzünder 12V App über Bluetooth & Steuerbox -10°C - 45°C (14°F - 113°F) 6SH]LȴNDWLRQHQ LED-Streifen Licht Steuerbox Auto Zigarettenanzünder Benutzerhandbuch 4 1 1 1 05 Ԯ Vorbereitung vor der Installation ΖQVWDOOLHUHQ6LHΖKUH/LFKWOHLVWH a. b. Packen Sie die Schachtel aus und überprüfen Sie alle in der Packliste aufgeführten Artikel. Schalten Sie das Lichtband ein und prüfen Sie, ob es aueuchtet. a. b. c. d. e. Wischen Sie die Installationsäche ab. Halten Sie es sauber und glatt. Installieren Sie den Zigarettenanzünder und die Steuerbox in der Mittelkonsole. Ziehen Sie die Schutzfolie ab und kleben Sie das Lichtstreifen wie auf dem Bild gezeigt an. Drücken Sie den Streifen fest von Ende zu Ende und verstärken Sie die Enden des Streifens mit Kabelbindern und Schrauben. Setzen Sie den Zigarettenanzünder in die Steckdose ein und drücken Sie den Knopf darauf. Die Taste leuchtet auf und zeigt an, dass das Streifenlicht eingeschaltet ist. ԯ Installationsschritte 06 RücksitzFahrersitz Zigarettenanzünder Lenkrad Schraubenbefestigungsloch 07 6WHXHUQPLWGHU6WHXHUER[ Ein/ Aus Farbwechsel Musikmodus / Helligkeitsanpassung DrucktasteFunktion Schalten Sie das Licht ein/ aus. Drücken Sie, um durch 9 Farben zu blättern. Drücken Sie, um den Musikmodus zu starten. Halten Sie gedrückt, um die 6-stuge Helligkeit zu durchlaufen. Ein/ Aus Farbwechsel Musikmodus/ Helligkeitsanpassung +HUXQWHUODGHQGHU*RYHH+RPH$SS Laden Sie die Govee Home-App aus dem App Store (iOS-Geräte) oder von Google Play (Android-Geräte) herunter. Hinweis: Sie benötigen ein Smartphone mit iOS 9.3 (oder höher) oder Android 4.4 (oder höher). Govee Home 08 $QVFKOLH¡HQGHU/LFKWOHLVWHDQGLH$SS Ԯ ԯ ԰ Schalten Sie Bluetooth auf Ihrem Mobiltelefon ein. Önen Sie Govee Home, tippen Sie oben rechts auf das Symbol "+". Wählen Sie in der Geräteliste „H6114“ 'LH.XQGHQEHWUHXXQJ Warranty12-Monate Beschränkte Garantie SupportLifetime Technische Unterstützung [email protected] Oziell Websitewww.govee.com @Govee @Govee @Goveeocial @Govee Français 6FK«PD Longueur Couleur Alimentation Électrique Voltage de Régime Méthode du Contrôle Température du Fonctionnement 4 × 22cm / 4 × 0.72ft RGB L’allume-cigarette 12V App via Bluetooth & Boîtier de Contrôle -10°C - 45°C (14°F - 113°F) 6S«FLȴFDWLRQV Bande de lumière LED Boîte de contrôle L’allume-cigarette Manuel d'emploi 4 1 1 1 09 Ԯ Préparation avant l'installation ΖQVWDOOH]YRWUH5XEDQ/(' a. b. Déballez la boîte et vériez tous les éléments énumérés dans la liste d'emballage Allumez la bande LED et vériez si elle s’allume. a. b. c. d. e. Veuillez nettoyer la poussière et vous assurer que la surface est propre et sèche; Installez l'allume-cigarette et le boîtier de commande dans la console centrale; Veuillez détacher directement l'autocollant de la bande et xer la bande comme indiqué dans l’image; Pressez fermement la bande d'un bout à l'autre et renforcez les extrémités de la bande à l'aide des attaches de câbles et des vis; Insérez l'allume-cigarette dans la prise et appuyez sur le bouton de l'allume-cigarette. Le bouton s'allume, indiquant que la bande est allumée. ԯ Étapes d’installation 10 Siège arrièreSiège avant l’allume-cigarette Volant Trou de xation de vis 11 &RQWUROOH]DYHFOHER°WLHUGHFRPPDQGH Bouton Allumer / Éteindre Changement de couleur Mode Musique / Réglage de la Luminosité BoutonFonction Allumer / Éteindre la lumière. Appuyez pour changer parmi les 9 couleurs Appuyez pour activer le Mode Musique. Appuyez et maintenez pour changer la luminosité à 6 niveaux. Bouton Allumer / Éteindre Changement de couleur Mode Musique / Réglage de la Luminosité 7«O«FKDUJH]Oȇ$SSm*RYHH+RPH} Téléchargez l'app «Govee Home» sur l'App Store (appareils iOS) ou sur Google Pla…

Text truncated - open the document above for the full version.

(Shenzhen Intellirocks Tech. Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-08-22 FCC ID: (2AQA6-H6114A) Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing (“Shenzhen Intellirocks Tech. Co., Ltd.”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing (“Shenzhen Intellirocks Tech. Co., Ltd.”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates)as an entity producing “covered” equipment. Applicant: Shenzhen Intellirocks Tech. Co., Ltd. Address: No. 2901-2904, 3002, Block C, Section 1, Chuangzhi Yuncheng Building, Liuxian Avenue,Xili Community, Xili Street, Nanshan District, Shenzhen, Guangdong 518000 China Contact Person: Eric Pan Tel.: Manager Email: [email protected] Sincerely, Signature:

Shenzhen Intellirocks Tech. Co., Ltd. Address: No. 2901-2904, 3002, Block C, Section 1, Chuangzhi Yuncheng Building, Liuxian Avenue,Xili Community, Xili Street, Nanshan District, Shenzhen, Guangdong 518000 China Date: 2024-08-28 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID: 2AQA6-H6114A FRN: 0027657980 (“Shenzhen Intellirocks Tech. Co., Ltd.”) certifies that, as of the date of the filing of the application, GOVEE MOMENTS(US) TRADING LIMITED is our designated U.S. agent for service of process for the above referenced FCC ID. (“Shenzhen Intellirocks Tech. Co., Ltd.”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. GOVEE MOMENTS(US) TRADING LIMITED accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: GOVEE MOMENTS(US) TRADING LIMITED Address: 2501 Chatham Rd Suite R Springfield IL 62704 FRN: 0033426016 Contact Person: Jenny You Email: [email protected] Sincerely, Signed on behalf of Shenzhen Intellirocks Tech. Co., Ltd. Signed on behalf of GOVEE MOMENTS(US) TRADING LIMITED Name: Eric Pan Name: Jenny You Title: Manager Title: Certification Manager Date: 2024-08-28 Date: 2024-08-28

Shenzhen Intellirocks Tech. Co., Ltd. Date:2024-08-22 Product Model Number: H6114 FCC ID: 2AQA6-H6114A To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-21010375 On behalf of: Shenzhen Intellirocks Tech. Co., Ltd.

Shenzhen Intellirocks Tech. Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 22, 2024 Subject; Request for Confidentiality FCC ID: 2AQA6-H6114A To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Eric Pan Title: Manager

Antenna test report Test Laboratory Dongguan Yijia Electronic Co., LTD Address No. 59 Muyu Road, Shatou Community, Chang 'an Town, Dongguan City, Guangdong Province Contact: Mr. Gan 13823198410 Model H6114 1. Test procedures Name Parameter Method Standard No. Mobile communication antenna VSWR Generic specificaiton for antennas used in the mobile communications GB/T 9410-2008 Antenna Gain Radiation pattern Antenna Radiation efficiency IEEE Standard Test Procedures for Antennas ANSI/IEEE Std 149-1979 2. Test Equipment Equipment Model No. Serial No. Manufacture Calibration Date Next calibration Date 2 4 probe Microwave chamber MPS2450 Multi- probe OTA me asurement systems 5*5*5 YJ-PB-F01 XH-IOE 2023.09.01 2024.09.01 Network Analyzer ZVB8 YJ-RD- 15 ROHDE& SCH WARS 2023.08.25 2024.08.25 Wideband radio Communication tester CMW500 YJ-RD- 16 ROHDE& SCH WARS 2023.08.25 2024.08.25 3. DUT Setup Photo 4. Bluetooth Antenna Physical Size 5. Bluetooth Antenna Type & Gain Type: PCB Frequency / MHz BT Gain/ dBi 2400 0.57 2410 1.05 2420 1.28 2430 1.93 2440 2.7 2450 3.65 2460 3.86 2470 4.51 2480 4.26 2490 4.39 2500 3.97 BT： 6. Bluetooth Antenna Pattern Picture 2400MHz 2450MHz 2500MHz Tester by：Wu xianming

Page 1 of 4 Report No.: 8225EU012705W-AB ANNEX B EXTERNAL PHOTOS PHOTO 1 PHOTO 2 Page 2 of 4 Report No.: 8225EU012705W-AB PHOTO 3 PHOTO 4 Page 3 of 4 Report No.: 8225EU012705W-AB PHOTO 5 PHOTO 6 Page 4 of 4 Report No.: 8225EU012705W-AB PHOTO 7 --- End ---

Label Location On EUT Label

Page 1 of 3 Report No.: 8225EU012705W-AC ANNEX C INTERNAL PHOTOS PHOTO 1 PHOTO 2 Page 2 of 3 Report No.: 8225EU012705W-AC PHOTO 3 PHOTO 4 PCB Antenna Page 3 of 3 Report No.: 8225EU012705W-AC PHOTO 5 --- End ---

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) FCC ID: 2AQA6-H6114A EUT Specification EUT Govee RGB Car LED Strip Light Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz BLE Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power -2.59dBm (0.0006W) Antenna gain (Max) 4.51 dBi Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density(mW/cm 2 ) Average Time (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 6 1500-100000 -- -- 5 6 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 6 1500-100000 -- -- 1 30 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result BLE worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) BLE 2402 -2.59 -2.59±1 -1.59 4.51 0.0004 1 Test Result: Pass

TEST REPORT Report No.: 8225EU012705W Applicant: Shenzhen Intellirocks Tech. Co., Ltd. Address: No.2901-2904, 3002, Block C, Section 1, Chuangzhi Yuncheng Building, Liuxian Avenue, Xili Community Xili Street, Nanshan District, Shenzhen, Guangdong, China Product Name: Govee RGB Car LED Strip Light Model No.: H6114 Trademark: Govee FCC ID: 2AQA6-H6114A Test Standard(s): 47 CFR Part 15 Subpart C Date of Receipt: Jan. 28, 2024 Test Date: Jan. 28, 2024 – Feb. 04, 2024 Date of Issue: Aug. 07, 2024 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: ____________________ _____________________ Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 31 Report No.: 8225EU012705W TRF No.: FCC Part 15 Subpart C_BLE (A01) Revision Record Report Version Issued Date Description Status V0 Aug. 07, 2024 Original Valid Page 3 of 31 Report No.: 8225EU012705W TRF No.: FCC Part 15 Subpart C_BLE (A01) Table of Contents 1 COVER PAGE .................................................................................................................................... 1 2 GENERAL INFORMATION .......................................................................................................................5 2.1 APPLICANT INFORMATION ...................................................................................................................5 2.2 MANUFACTURER INFORMATION ...........................................................................................................5 2.3 FACTORY INFORMATION ......................................................................................................................5 2.4 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................5 2.5 TECHNICAL INFORMATION OF E.U.T. ...................................................................................................6 3 TEST SUMMARY .......................................................................................................................................7 3.1 TEST STANDARD ................................................................................................................................7 3.2 TEST VERDICT ....................................................................................................................................7 3.3 TEST LABORATORY ............................................................................................................................7 4 TEST CONFIGURATION ...........................................................................................................................8 4.1 TEST ENVIRONMENT ...........................................................................................................................8 4.2 TEST EQUIPMENT ...............................................................................................................................8 4.3 DESCRIPTION OF SUPPORT UNIT .........................................................................................................9 4.4 TEST MODE........................................................................................................................................9 4.5 MEASUREMENT UNCERTAINTY ............................................................................................................9 4.6 DEVIATION FROM STANDARDS ............................................................................................................9 4.7 ABNORMALITIES FROM STANDARD CONDITION ....................................................................................9 5 TEST ITEMS ........................................................................................................................................... 10 5.1 ANTENNA REQUIREMENT .................................................................................................................. 10 5.1.1 Test Requirement ........................................................................................................... 10 5.1.2 Antenna Anti-Replacement Construction ........................................................................ 10 5.1.3 Antenna Gain .................................................................................................................. 10 5.2 CONDUCTED EMISSION AT AC POWER LINE ..................................................................................... 11 5.2.1 Test Requirement ........................................................................................................... 11 5.2.2 Test Setup Diagram ........................................................................................................ 11 5.2.3 Test Procedure ............................................................................................................... 11 5.2.4 Test Data......................................................................................................................... 11 5.3 DTS BANDWIDTH ............................................................................................................................ 12 5.3.1 Test Requirement ........................................................................................................... 12 5.3.2 Test Setup Diagram ........................................................................................................ 12 5.3.3 Test Procedure ............................................................................................................... 12 5.3.4 Test Data......................................................................................................................... 12 5.4 MAXIMUM CONDUCTED OUTPUT POWER .......................................................................................... 13 5.4.1 Test Requirement ........................................................................................................... 13 5.4.2 Test Setup Diagr…

Text truncated - open the document above for the full version.

Page 1 of 24 Report No.: 8225EU012705W-AD ANNEX D TEST DATA For Project No.: 8225EU012705W Client: Shenzhen Intellirocks Tech. Co., Ltd. Product Description: Govee RGB Car LED Strip Light Model No.: H6114 FCC ID: 2AQA6-H6114A Technology: Bluetooth BLE Test Engineer: Test Date: 2024-02-01 Page 2 of 24 Report No.: 8225EU012705W-AD Test Summary Item Result Duty Cycle Pass Bandwidth Pass Maximum Conducted Output Power Pass Maximum Power Spectral Density Pass Unwanted Emissions In Non-restricted Frequency Bands Pass Unwanted Emissions In Restricted Frequency Bands Pass Page 3 of 24 Report No.: 8225EU012705W-AD 1. Duty Cycle 1.1 Ant1 1.1.1 Test Result Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 100.000 100.000 100.00 0.00 0.00 2440 100.000 100.000 100.00 0.00 0.00 2480 100.000 100.000 100.00 0.00 0.00 Page 4 of 24 Report No.: 8225EU012705W-AD 1.1.2 Test Graph 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 5 of 24 Report No.: 8225EU012705W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 6 of 24 Report No.: 8225EU012705W-AD 2. Bandwidth 2.1 OBW 2.1.1 Test Result Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result 1M SISO 2402 1 1.084 Pass 2440 1 1.087 Pass 2480 1 1.098 Pass Page 7 of 24 Report No.: 8225EU012705W-AD 2.1.2 Test Graph 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 8 of 24 Report No.: 8225EU012705W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 9 of 24 Report No.: 8225EU012705W-AD 2.2 6dB BW 2.2.1 Test Result Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.681 >=0.5 Pass 2440 1 0.684 >=0.5 Pass 2480 1 0.680 >=0.5 Pass Page 10 of 24 Report No.: 8225EU012705W-AD 2.2.2 Test Graph 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 11 of 24 Report No.: 8225EU012705W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 12 of 24 Report No.: 8225EU012705W-AD 3. Maximum Conducted Output Power 3.1 Power 3.1.1 Test Result Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 1M SISO 2402 -2.59 <=30 Pass 2440 -2.63 <=30 Pass 2480 -2.87 <=30 Pass Page 13 of 24 Report No.: 8225EU012705W-AD 3.1.2 Test Graph 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 14 of 24 Report No.: 8225EU012705W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 15 of 24 Report No.: 8225EU012705W-AD 4. Maximum Power Spectral Density 4.1 PSD 4.1.1 Test Result Mode TX Type Frequency (MHz) Maximum PSD (dBm/3kHz) Verdict ANT1 Limit 1M SISO 2402 -16.11 <=8 Pass 2440 -16.09 <=8 Pass 2480 -16.37 <=8 Pass Page 16 of 24 Report No.: 8225EU012705W-AD 4.1.2 Test Graph 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 17 of 24 Report No.: 8225EU012705W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 18 of 24 Report No.: 8225EU012705W-AD 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Ref 5.1.1 Test Result Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) 1M SISO 2402 1 -3.54 2440 1 -3.58 2480 1 -3.80 Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. Page 19 of 24 Report No.: 8225EU012705W-AD 5.1.2 Test Graph 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 20 of 24 Report No.: 8225EU012705W-AD 1M_HCH_2480MHz_Ant1_NTNV Page 21 of 24 Report No.: 8225EU012705W-AD 5.2 CSE 5.2.1 Test Result Mode TX Type Frequency (MHz) ANT Level of Reference (dBm) Limit (dBm) Verdict 1M SISO 2402 1 -3.54 -23.54 Pass 2440 1 -3.54 -23.54 Pass 2480 1 -3.54 -23.54 Pass Note1: Refer to FCC Part 15.247 (d) and ANSI C63.10-2020, the channel contains the maximum PSD level was used to establish the reference level. Page 22 of 24 Report No.: 8225EU012705W-AD 5.2.2 Test Graph 1M_LCH_2402MHz_Ant1_NTNV 1M_LCH_2402MHz_Ant1_NTNV Page 23 of 24 Report No.: 8225EU012705W-AD 1M_MCH_2440MHz_Ant1_NTNV 1M_HCH_2480MHz_Ant1_NTNV Page 24 of 24 Report No.: 8225EU012705W-AD 1M_HCH_2480MHz_Ant1_NTNV --------- End of Report -------

Page 1 of 1 Report No.: 8225EU012705W-AA ANNEX A TEST SETUP PHOTOS PHOTO 1 Radiated Emission (Below 1GHz) PHOTO 2 Radiated Emission ( Above 1GHz) --- End ---