2AQKJ-S5IWIRELESS CONTROLLER

Product package SHAKS S5i SHAKS User manual USB cable (for charging & wired connection) Controller buttons RT RB LT USB C LB Pairing button Start XB A Y Select D-Pad BackHome L-Stick (L3) R-Stick (R3) PowerFunction Mode button ※ Possible to play while charging. Charge with charging cable by connecting to PC or USB power charging device (5V). 1st LED blinks fast 1st LED blinks slowly 1st LED stays on Charging Fully charged Low battery How to charge User manual SHAKS S5i http://shaksgame.com [email protected] 070-7542-6699 Before use Charge gamepad fully before using when first use. Check out this manual v1.3 carefully. Power on / off: Press and hold the button for 3 seconds to turn it on and off. Power on / off Slightly pull both sides, put one side of the smartphone on one side of S5i first, and then stretch the other side of S5i to fix the phone. *NOTE: The maximum thickness is 9mm and max length of the product is 165mm. Please be careful not to exceed this standard. Oversized installation may result in excessive damage to the product. 165mm 9mm How to fit a Smartphone iPhone, iPadMac PC Linux PC Windows PC, Laptop Android (smartphone, tablet, TV, TV box) Connectable device LED status Product: SHAKS S5i Weight : 160g Output Power : Class 2 Frequency Band : 2400 ~ 2483MHz Transmission Range : 7 ~ 10 m Supported profiles : HID, DInput, XInput Operating Time : Up to 8 hours Charging Time : 1 hour Size(mm) : 134(W)*92.5(L)*33(H) Connectivity (Wireless) : Bluetooth 4.1 The operation time can be changed depending on the type of game. ※ Technical specification App for Android – SHAKS Game Hub ※ CAUTION: When upgrading firmware, be sure to connect USB cable with S5i. Gamepad status checking SHAKS Touch Mapping Service Firmware upgrade Setting the Function button - Turbo, sniper mode, mouse, camera shooting, etc. Product inquiry ※ SHAKS touch mapping can be activated when S5i is on [SHAKS mapping mode]. Please refer to manual in App. ※ Please search ‘SHAKS Game Hub’ in Google Play or download and install App using above QR code. - for touch-only games App for Windows ※ Please download and install App using above QR code. ※ The ‘O’ button in the manual is the same as S5i Function button. It provides the same function as Android App except SHAKS Touch Mapping service. Press reset button on the back of S5i with a pin. Use it when the button is not working. RESET How to reset ※ Reconnect : The gamepad is trying to connect with the registered (paired) device. To register new device, delete the registered one by following the pairing process above. ※ DirectInput mode : Available on DirectInput enabled devices like Android, Mac PC, Linux PC. ※ XInput (Wireless, Wired) : Available on Windows, XInput (Xbox) enabled devices. ※ 3rd LED lit on by pressing the Function button regardless of the Mode LED ※ Pairing : Press pairing button( ) for more than 2 seconds. FeatureModeMode status XInput(Wired)* Reconnect (2nd, 3rd LED blink alternately)* Pairing (2nd, 3rd LED blink fast)* Power 1st2nd3rd Function notification LED 4th5th iOS [ LED status for each mode ] [LED status in Pairing process] SHAKS mapping service mode Directinput(Wireless)* XInput(Wireless)* ※ LED order 1st2nd3rd4th5th Q&A - smartphone, TV and TV set-top box Q1) What TVs or TV set-top boxes and other products are compatible? ① For Android products, please connect in DirectInput mode ( ). Products accessible to Google Play Store are Android compatible products. ② For products supporting Windows (XInput) or Xbox 360 gamepads, please connect in XInput (wireless, wired) mode to use. Q2) How do I update the firmware? You can update it in SHAKS App. Q3) Can I use it by wire? Yes, please refer to 5. Xinput (Wired) mode. If you use C to C type USB cable on your smartphone, you can connect to S5i by wire. When the power is on, even if you change the mode on the side, the mode will not change. Please follow step in each mode setting - Change to the desired mode and press button for a long time to turn the power off and on to apply it. ※ 1 Connecting : Please proceed 'pairing' process. If you have a connected device, it will automatically 'reconnect'. 2 When pairing is successful : 2nd & 3rd LEDs turn off and 4th & 5th LEDs light up. Mode setting: Power off, change the mode to ( ) and power it on. 1. DirectInput mode - DirectInput mode - 3 1 2 - mode button - Android (Smartphone,Tablet,TV Box,TV), Mac PC, Linux PC Available on DirectInput-enabled devices. ※ Be sure to follow steps in order. ※ Can be connected regardless of mode. ※ With C to C type USB Cable, you can use wired mode with smartphone, connecting as Xbox compatible gamepad. 5. Xinput (Wired) mode Connecting: Power off, press pairing button and connect provided USB cable to the device. Connect to devices supporting Windows PC, Laptop, XInput(Xbox) It’s wired connection without Bluetooth. When completed: 4th & 5th LEDs turn off and 1st LED lights up. 1 2 4. SHAKS mapping mode (for Android only) Mode setting : Power off, change the mode to ( ) and power it on. Connecting : Please proceed 'pairing' process. If you have a connected device, it will automatically 'reconnect'. 2 When pairing is successful: 2nd & 3rd LEDs turn off and 1st LED lights up. 3 - mode button - - SHAKS mapping service mode - 1 ※ Please refer to [Android SHAKS App – SHAKS Game Hub] ※ You may need to update firmware in Android SHAKS App. 2. Xinput (Wireless) mode Connect to games supporting Windows, Laptop and Xinput(Xbox) Bluetooth dongle may be required for a PC. If your PC doesn’t support Bluetooth, please use 5. Xinput (Wired) mode. When pairing is successful : 2nd & 3rd LEDs turn off and 5th LEDs light up. Mode setting : Power off, change the mode to ( ) and power it on. 1 Connecting : Please proceed 'pairing' process. If you have a connected device, it will automatically 'reconnect'. - mode button - - XInput(Wireless) mode - 3 1 2 2 Product warranty ※ Reconnect : The gamepad is attempting to connect with the paired device…

Text truncated - open the document above for the full version.

AKSys Co., Ltd. Agent Authorization Letter 2020-10-26 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen Huaxia Testing Technology Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Yoo, KJ Position: CEO Company Name: AKSys Co., Ltd. Address: A706, Ace Cheonggye Tower, 53 Seonggogae-ro, Uiwang-si, Gyeonggi-do, Republic of Korea Tel / Fax +82 70-7010-7025/ +82 70-7159-2177 E-Mail: [email protected]

AKSys Co., Ltd. Long Term Confidentiality Request Letter 2020-10-26 MET Laboratories, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (FCC ID: 2AQKJ-S5I) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - e.g. Block diagram - e.g. SCH - e.g. Operational Description required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Name: Yoo, KJ Position: CEO Company Name: AKSys Co., Ltd. Address: A706, Ace Cheonggye Tower, 53 Seonggogae-ro, Uiwang-si, Gyeonggi-do, Republic of Korea Tel / Fax +82 70-7010-7025/ +82 70-7159-2177 E-Mail: [email protected]

Model difference letter 2020,10,28 Dear MET Reviewer, This is a new Application from AKSys Co., Ltd. Model No.: Gamepad S5i, topp Gaming Medusa Only the model Gamepad S5i was tested, since the electrical circuit design, layout,components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Thank you for your cooperation! Yours sincerely, Signatory: Name: Yoo, KJ Position: CEO Company Name: AKSys Co., Ltd. Address: A706, Ace Cheonggye Tower, 53 Seonggogae-ro, Uiwang-si, Gyeonggi-do, Republic of Korea Tel / Fax +82 70-7010-7025/ +82 70-7159-2177 E-Mail: [email protected]

Test Model No.:Gamepad S5i

Test Model No.:Gamepad S5i

FCC ID: 2AQKJ-S5I FCC ID: 2AQKJ-S5I FCC ID: 2AQKJ-S5I FCC ID: 2AQKJ-S5I

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 RF Exposure Evaluation Report The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No. : CQASZ20200901113E-02 Applicant: AKSys Co.,Ltd. Address of Applicant: A706, Ace Cheonggye Tower, 53 Seonggogae-ro, Uiwang-si, Gyeonggi-do, Korea WIRELESS CONTROLLER Equipment Under Test (EUT): EUT Name: Mode No.: Test Model No.: Brand Name: FCC ID: Standards: Gamepad S5i, topp Gaming Medusa Gamepad S5i SHAKS, topp Gaming 2AQKJ-S5I 47 CFR Part 1.1307 47 CFR Part 2.1093 KDB447498D01 General RF Exposure Guidance v06 Date of Receipt: 2020-09-26 Date of Test: 2020-09-26 to 2020-10-12 Date of Issue: 2020-10-12 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. Tested By： (Martin Lee) Reviewed By: (Sheek Luo) Approved By: ( Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901113E-02 Page:2 of 6 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200901113E-02 Rev.01 Initial report 2020-10-12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901113E-02 Page:3 of 6 2 Contents Page 1 VERSION .....................................................................................................................................................................2 2 CONTENTS .................................................................................................................................................................3 3 GENERAL INFORMATION ......................................................................................................................................4 3.1 CLIENT INFORMATION ...............................................................................................................................................4 3.2 GENERAL DESCRIPTION OF EUT ...............................................................................................................................4 4 SAR EVALUATION ....................................................................................................................................................5 4.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................5 4.1.1 Standard Requirement .................................................................................................................................5 4.1.2 Limits ..............................................................................................................................................................5 4.1.3 EUT RF Exposure.........................................................................................................................................6 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901113E-02 Page:4 of 6 3 General Information 3.1 Client Information Applicant: AKSys Co.,Ltd. Address of Applicant: A706, Ace Cheonggye Tower, 53 Seonggogae-ro, Uiwang-si, Gyeonggi-do, Korea Manufacturer: AKSys Co.,Ltd. Address of Manufacturer: A706, Ace Cheonggye Tower, 53 Seonggogae-ro, Uiwang-si, Gyeonggi-do, Korea Factory: Dongguan Zhonghe electronic technology co., LTD Address of Factory: 6th floor, building B, No.2, Lilian road, Tangxia town, Dongguan, Guangdong 3.2 General Description of EUT Product Name: WIRELESS CONTROLLER Model No.: Gamepad S5i, topp Gaming Medusa Trade Mark: SHAKS, topp Gaming Hardware Version: V1.0 Software Version: 300006 Operation Frequency: 2402MHz~2480MHz Bluetooth Version: V4.1 Modulation Type: GFSK Transfer Rate: 1Mbps Number of Channel: 40 Product Type: Mobile Portable Fix Location Test Software of EUT: Blue test3 (manufacturer declare) Antenna Type: Ceramic antenna Antenna Gain: 0dBi EUT Power Supply: lithium battery:DC3.7V, 400mAh, Charge by DC5.0V Note: Model No.: Gamepad S5i, topp Gaming Medusa Only the model Gamepad S5i was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901113E-02 Page:5 of 6 4 SAR Evaluation 4.1 RF Exposure Compliance Requirement 4.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 4.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901113E-02…

Text truncated - open the document above for the full version.

Shenzhen Huaxia Testing Technology Co., Ltd 1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District, Shenzhen, China Telephone: +86-755-26648640 Fax: +86-755-26648637 Website: www.cqa-cert.com Report Template Version: V04 Report Template Revision Date: 2018-07-06 TEST REPORT The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s) tested. Without written approval of CQA, this report can’t be reproduced except in full. Report No.: CQASZ20200901113E-01 Applicant: AKSys Co.,Ltd. Address of Applicant: A706, Ace Cheonggye Tower, 53 Seonggogae-ro, Uiwang-si, Gyeonggi-do, Korea Equipment Under Test (EUT): WIRELESS CONTROLLER EUT Name: Model No.: Test Model No.: Brand Name: FCC ID: Standards: Date of Receipt: Date of Test: Date of Issue: Test Result: Gamepad S5i, topp Gaming Medusa Gamepad S5i SHAKS, topp Gaming 2AQKJ-S5I 47 CFR Part 15, Subpart C 2020-09-26 2020-09-26 to 2020-10-12 2020-10-12 PASS* *In the configuration tested, the EUT complied with the standards specified above Tested By： (Martin Lee) Reviewed By: (Sheek Luo) Approved By: (Jack Ai) Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901113E-01 Page:2 of 48 1 Version Revision History Of Report Report No. Version Description Issue Date CQASZ20200901113E-01 Rev.01 Initial report 2020-10-12 Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901113E-01 Page:3 of 48 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2013 PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 2013 PASS Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(3) ANSI C63.10 2013 PASS 6dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(2) ANSI C63.10 2013 PASS Power Spectral Density 47 CFR Part 15, Subpart C Section 15.247 (e) ANSI C63.10 2013 PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013 PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 2013 PASS Radiated Spurious Emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013 PASS Restricted bands around fundamental frequency (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 2013 PASS Note: Model No.: Gamepad S5i, topp Gaming Medusa Only the model Gamepad S5i was tested, since the electrical circuit design, layout, components used and internal wiring were identical for the above models, with difference being color of appearance and model name. Shenzhen Huaxia Testing Technology Co., Ltd Report No.: CQASZ20200901113E-01 Page:4 of 48 3 Contents Page 1 VERSION .................................................................................................................................................................. 2 2 TEST SUMMARY .................................................................................................................................................... 3 3 CONTENTS .............................................................................................................................................................. 4 4 GENERAL INFORMATION ................................................................................................................................... 5 4.1 CLIENT INFORMATION .......................................................................................................................................... 5 4.2 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 5 4.3 ADDITIONAL INSTRUCTIONS................................................................................................................................. 7 4.4 TEST ENVIRONMENT ............................................................................................................................................ 9 4.5 DESCRIPTION OF SUPPORT UNITS ......................................................................................................................... 9 4.6 STATEMENT OF THE MEASUREMENT UNCERTAINTY ........................................................................................... 10 4.7 TEST LOCATION ................................................................................................................................................. 11 4.8 TEST FACILITY ................................................................................................................................................... 11 4.9 DEVIATION FROM STANDARDS ........................................................................................................................... 11 4.10 OTHER INFORMATION REQUESTED BY THE CUSTOMER ...................................................................................... 11 4.11 EQUIPMENT LIST ................................................................................................................................................ 12 5 TEST RESULTS AND MEASUREMENT DATA .............................................................................................. 13 5.1 ANTENNA REQUIREMENT ................................................................................................................................... 13 5.2 CONDUCTED EMISSIONS ..................................................................................................................................... 14 5.3 CONDUCTED PEAK OUTPUT POWER ................................................................................................................... 17 5.4 6DB OCCUPY BANDWIDTH ................................................................................................................................. 20 5…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup 1.1 Radiated Emission 9kHz~30MHz: 30MHz~1GHz: Above 1GHz: 1.2 Conducted Emission