2AQSN-DCPLHS12Contour Pro

ITEMS INCLUDED IN THE BOX ARTICLES INCLUS DANS LA BOÎTE Installation guide for Guide d'installation pour 1 877 430 1818www.d als.comP.1 CONTOUR PRO DCP-LHS12-BK The landscape transformer DCP-TR60, DCP-TR200, DCP-PTR36 or DCP-TR300 is required for installation (Sold separately). Les transformateur pour appareils d’éclairage paysager DCP-TR60, DCP-TR200, DCP-PTR36 ou DCP-TR300 est requis pour l'installation (Vendu séparément). WET LOCATION EMPLACEMENT MOUILLÉ x1 B Self drilling Phillips flat head screw Vis auto-perforante à tête plate Phillips C D E Self drilling Phillips rounded head screw Vis auto-perforante à tête bombée Phillips Plastic anchor Ancrage en plastique 12” Linear hardscape smart light Luminaire linéaire paysager intelligent de 12 pouces A x2x2x2x2 Waterproof wire nut with silicon Marettes étanches siliconées DCP-TR60: Transformer / Transformateur - MAX. 60W DCP-TR200: Transformer / Transformateur - MAX. 200W DCP-TR300: Transformer / Transformateur - MAX. 300W LCBL-50-16: 50 feet low-voltage wire / 50 pieds de fil basse tension - 16 gauge / calibre 16 LCBL-50-14: 50 feet low-voltage wire / 50 pieds de fil basse tension - 14 gauge / calibre 14 LCBL-100-16: 100 feet low-voltage wire / 100 pieds de fil basse tension - 16 gauge / calibre 16 LCBL-100-14: 100 feet low-voltage wire / 100 pieds de fil basse tension - 14 gauge / calibre 14 LCBL-100-12: 100 feet low-voltage wire / 100 pieds de fil basse tension - 12 gauge / calibre 12 LCBL-200-12: 200 feet low-voltage wire / 200 pieds de fil basse tension - 12 gauge / calibre 12 COMPATIBLE ACCESSORIES (SOLD SEPARATELY) ACCESSOIRES COMPATIBLES (VENDUS SÉPARÉMENT) BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER. Instructions pertaining to a risk of fire, electric shock or injury to persons. Installation must be done according to local electrical codes. Installation must be done by a qualified electrician. AVANT DE DÉBUTER L’INSTALLATION, COUPER L’ALIMENTATION DU FIL DU SECTEUR À L’AIDE DU DISJONCTEUR. Ces instructions se rapportent à un risque d’incendie, de chocs électriques ou de blessures corporelles. L'installation doit être éffectuée conformément aux codes électriques locaux. L'installation devrait être effectuée par un électricien qualifié. 1 877 430 1818www.d als.comP.2 INSTALLATION IN HARDSCAPE (2 OPTIONS) INSTALLATION DANS UN MURET (2 OPTIONS) x2 D x2 E OPTION 1: Use the mounting plate as a template to mark the holes for the plastic anchors. Drill 2 holes of 1/4” by 1-1/8” deep. Install CONTOUR in place. Utiliser la plaque de montage comme gabarit pour marquer les trous des ancrages en plastique. Percer 2 trous de 1/4" par 1-1/8" de profondeur. Installer CONTOUR en place. OPTION 2: Lay a bed of mortar. Press the linear on the mortar bedding until the mounting plate holes are filled. Make sure CONTOUR is levelled. Préparer un couche de mortier. Presser le linéaire sur le lit de mortier jusqu'à ce que les trous de la plaque de montage soient bien remplis. S'assurer que le CONTOUR est nivelé. If space is an issue during the installation, follow the dashed lines on the mounting plate to cut off excess material. Si vous manquez d'espace durant l’installation, suivre les lignes pointillées sur la plaque de montage pour couper l'excédent de matériel. Adjust CONTOUR to the desired angle. Tighten the 2 screws to secure in place. Ajuster CONTOUR dans l’angle désiré. Serrer les 2 vis pour maintenir en place. 2 Select the desired option. Sélectionner l'option souhaitée. 1 Installation in hardscape Installation dans un muret Wall-mounted installation Installation murale Prepare your electrical run accordingly, make your connections. Préparer votre installation électrique en conséquence, faire les connexions. x2 B Prepare your electrical run accordingly, make your connections. Préparer votre installation électrique en conséquence, faire les connexions. x2 B 1 CONNECTION DETAILS DÉTAILS DE CONNEXION WALL-MOUNTED INSTALLATION INSTALLATION MURALE Remove the mounting plate. Enlever la plaque de montage. 1 Mesure and mark 10-3/4 inches apart the 2 holes for the plastic anchors. Drill 2 holes of 1/4” by 1-1/8” deep. Install CONTOUR in place. Mesurer et marquer à 10-3/4 pouces de distance les 2 trous des ancrages en plastique. Percer 2 trous de 1/4" par 1-1/8" de profondeur. Installer CONTOUR en place. 2 x2 C x2 E 1 877 430 1818www.d als.comP.3 SMART CONTROL CONTRÔLE INTELLIGENT STANDALONE CONTROL: Press the button to cycle through colors and whites. Click to cycle through the whites (2200K-4000K) and double click to cycle through the colors (7 colors). CONTRÔLE INDÉPENDANT: Appuyer sur le bouton pour cycler à travers les couleurs et les blancs. Cliquer pour faire défiler les blancs (2200K-4000K) et double-cliquer pour faire défiler les couleurs (7 couleurs). Turn the transformer on (Sold separately). Mettre le transformateur sous tension (Vendu séparément). 1 Select the desired control option. Sélectionner l'option de contrôle souhaitée. 2 Dals Connect App™ Application Dals Connect ™ SMART CONTROL: Download the “Dals Connect App™” and follow the instructions (P.4). CONTRÔLE INTELLIGENT: Télécharger l’application “Dals Connect ™” et suivre les instructions (P.4). 1 877 430 1818www.d als.comP.4 Configure your profile and set your home inside the app. This will allow you to control light groups and create advanced automation based on your location. Configurer le profil et la maison à l’intérieur de l’application. Cette étape permettra de contrôler des groupes de lumières ainsi que de créer des automations avancées basées sur votre position. 2 Make sure your light is in pairing mode. Then, in the Dals Connect app, press the “+” sign in the top right-hand corner and select “Add Device”. It will be detected instantly under “Add device”, then press on “Add”. Assurez-vous que votre lumière est en mode pairage. Ensuite, dans l’application Dals Connect, appuyer sur le signe “+” dans le coin supérieur droit et sélectionne…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: DALS Lighting USA Inc. Contact Name: Alexandre Morin FRN: 0022250401 Address: 4383, NW 124th Ave., Coral Spring, Florida 33065, USA Telephone No: +1-450-430-1818 Email: [email protected] EIN: 30-0939102 Applicant: Company name: DALS Lighting, Inc Product Description: Contour Pro Grantee code: 2AQSN FCC ID: 2AQSN-DCPLHS12 FRN: 0027741933 Contact Name: Alexandre Morin Address: 80 De La Seigneurie East Blainville, Quebec, J7C 4N1 Canada Telephone No: 450 430-1818 Fax No: 450-430-1850 Email: [email protected] [DALS Lighting, Inc] certifies that, as of the date of this filing of the application with the TCB, [DALS Lighting USA Inc.] is our designated US agent for service of process for the above referenced FCC ID. [DALS Lighting USA Inc.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [DALS Lighting USA Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2025/8/18 Applicant’s Name: Alexandre Morin US Agent’s Name: Alexandre Morin Title: Smart Home and Technology Specialist Title: Smart Home and Technology Specialist Signature Signature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: DALS Lighting, Inc Grantee code: 2AQSN FCC ID: 2AQSN-DCPLHS12 FRN: 0027741933 Contact Name: Alexandre Morin Address: 80 De La Seigneurie East, Blainville, Quebec, J7C 4N1, Canada Telephone No: 450 430-1818 Fax No: 450-430-1850 Email: [email protected] i. [DALS Lighting, Inc] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [DALS Lighting, Inc] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [DALS Lighting, Inc] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2025/8/26 Applicant’s Name: Alexandre Morin Title: Smart Home and Technology Specialist Signature The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

DALS Lighting, Inc Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐Yes, go to Item 2. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Device Contour Pro Company name DALS Lighting, Inc Grantee code 2AQSN FCC ID 2AQSN-DCPLHS12 FRN 0027741933 Contact name Alexandre Morin Address 80 De La Seigneurie East, Blainville, Quebec, J7C 4N1, Canada Telephone number 450 430-1818 [email protected] Chipset/module information PHY 6222 Operating System (if applicable) / Storage Capacity (hard drive or other permanent memory storage, if applicable) / 2 Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 3 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher 3 RAM: 1 GB 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; n/a n/a n/a 4 After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐Yes, go to Item 3. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Alexandre Morin Date: 2025.8.27 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

DALS Lighting, Inc Product Similarity Declaration Product name: Contour Pro Model name: DCP-LHS12-XX (XX stands for color finishes) FCC ID: 2AQSN-DCPLHS12 We (DALS Lighting, Inc) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only differences the appearance colour. . Signature: Name: Alexandre Morin Address: 80 De La Seigneurie East, Blainville, Quebec, J7C 4N1, Canada

TCB CALL página 1 File FCC ID: 2AQSN-DCPLHS12 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. Google: TCB CALL página 2 TCB CALL página 3 TCB CALL página 4 ►CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit " US Agent for Service of Process LETTER OF ATTESTATION " included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit " US Agent for Service of Process LETTER OF ATTESTATION "

C5266091_X10_Ed.2 1/1 DALS Lighting, Inc Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2025-8-27 Subject: Request for Confidentiality FCC ID: 2AQSN-DCPLHS12 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☒ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Alexandre Morin Title: Smart Home and Technology Specialist

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: DALS Lighting, Inc Address: 80 De La Seigneurie East Blainville, Quebec, J7C 4N1 Canada Product Name: Contour Pro Model Number: DCP-LHS12-XX (XX stands for color finishes) FCC Identifier: 2AQSN-DCPLHS12 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Alexandre Morin 2025-8-27 Title: Smart Home and Technology Specialist Signature of applicant:

Shenzhen QC Testing Laboratory Co., Ltd. Page 1 of2 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Product Name: C o n t o u r P r o Test Model No.: DCP-LHS12-BK EUT Constructional Details Shenzhen QC Testing Laboratory Co., Ltd. Page 2 of2 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn ------End------

Shenzhen QC Testing Laboratory Co., Ltd. Page 1 of3 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Product Name: C o n t o u r P r o Test Model No.: DCP-LHS12-BK EUT Constructional Details： Antenna Shenzhen QC Testing Laboratory Co., Ltd. Page 2 of3 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Shenzhen QC Testing Laboratory Co., Ltd. Page 3 of3 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn -----End------

Shenzhen QC Testing Laboratory Co., Ltd. Page 1 of 2 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn FCC ID: 2AQSN-DCPLHS12 RF Exposure Evaluation FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, and highest channel individually. Shenzhen QC Testing Laboratory Co., Ltd. Page 2 of 2 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Test Result of RF Exposure Evaluation For BLE worst case Antenna Gain: 1.28dBi Test Frequency （MHz） Minimum Separation Distance (cm) Output Power (dBm) Target power (dBm) Target power (mW) Antenna Gain (Numeric) Power Density Limit (mW/cm 2 ) Power Density At 20 cm (mW/cm 2 ) Test Results 2402 20.00 6.31 6±1 5.01 1.34 1 0.0013 Pass 2440 20.00 5.98 6±1 5.01 1.34 1 0.0013 Pass 2480 20.00 5.86 6±1 5.01 1.34 1 0.0013 Pass The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure.

Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT25FR-1685E-01 Page 1 of 52 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn FCC PART 15.247 TEST REPORT On Behalf of DALS Lighting, Inc 80 De La Seigneurie East, Blainville, Quebec, J7C 4N1, Canada FCC ID: 2AQSN-DCPLHS12 Model: DCP-LHS12-XX (XX stands for color finishes) July 23, 2025 T hi s Repor t Concer ns: Or iginal Report Equi pm ent T ype: Cont our Pr o Test Engineer: Fan Yang / Report Number: QCT25FR-1685E-01 Test Date: July 21 ~ 23, 2025 Test Result: Pass Reviewed By: Vincent Yang / Approved By: Kendy Wang / Prepared By: Shenzhen QC Testing Laboratory Co., Ltd. East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 Shenzhen QC Testing Laboratory Co., Ltd. Report No.: QCT25FR-1685E-01 Page 2 of 52 Address: East of 1/F., Building E, Xinghong Science Park, No.111, Shuiku Road, Fenghuanggang, Xixiang Street, Bao'an District, Shenzhen, Guangdong, China Tel: 0755-23008269 Fax: 0755-23726780 http://www.qctest.com.cn Table of Contents 1. GENERAL INFORMATION ................................................................................................. 5 1.1 Product Description for Equipment under Test (EUT) ............................................................. 5 1.2 System Test Configuration ...................................................................................................... 6 1.3 Test Facility.............................................................................................................................. 7 1.4 Measurement Uncertainty ........................................................................................................ 7 2. SUMMARY OF TEST RESULTS ........................................................................................ 8 3. LIST OF TEST AND MEASUREMENT INSTRUMENTS .................................................... 9 3.1 Conducted Emission Test ........................................................................................................ 9 3.2 Radiated Emission Test ........................................................................................................... 9 3.3 RF Conducted test ................................................................................................................. 10 4. ANTENNA REQUIREMENT .............................................................................................. 11 5. CONDUCTED EMISSIONS ............................................................................................... 12 5.1 Applicable Standard............................................................................................................... 12 5.2 Limit ....................................................................................................................................... 12 5.3 Test setup .............................................................................................................................. 12 5.4 EMI Test Receiver Setup ....................................................................................................... 12 5.5 Test procedure....................................................................................................................... 12 5.6 Test Data ............................................................................................................................... 12 6. CONDUCTED PEAK OUTPUT POWER ........................................................................... 15 6.1 Applicable Standard............................................................................................................... 15 6.2 Limit ....................................................................................................................................... 15 6.3 Test setup .............................................................................................................................. 15 6.4 Test Procedure ...................................................................................................................... 16 6.5 Test Data ............................................................................................................................... 16 7. CHANNEL BANDWIDTH & 99% OCCUPIED BANDWIDTH ........................................... 21 7.1 Applicable Standard............................................................................................................... 21 7.2 Limit ....................................................................................................................................... 21 7.3 Test setup .............................................................................................................................. 21 7.4 Test Procedure ...................................................................................................................... 21 7.5 Test Data ............................................................................................................................... 22 8. POWER SPECTRAL DENSITY ........................................................................................ 29 8.1 Applicable Standard............................................................................................................... 29 8.2 Limit ....................................................................................................................................... 29 8.3 Test setup .............................................................................................................................. 29 8.4 Test Procedure .............................................................................................................…

Text truncated - open the document above for the full version.

AntennaSpecification Manufacture：TUYA ProductName：BP3LAntenna AntennaType：PCB TestDate：2021.06.23 Testedby：YingyunTong Approvedby：Licco Content 1.GeneralDescription.................................................................................1 2.TestConfigurations...................................................................................2 2.1TestEnvironment............................................................................2 2.2TestEquipment...............................................................................2 2.3TestPrinciple...................................................................................2 3.TestResults..............................................................................................3 3.1GainandEfficiency..........................................................................3 3.2RadiationPattern............................................................................4 4.AntennaDimensions................................................................................5 5.EUTPhoto................................................................................................5 6.TestSetupPhoto...............................…

Text truncated - open the document above for the full version.