2AQVL-HDS2RXbaby monitor

Wireless Digital Video Baby Monitor atch, Listen and Talk to Your Baby Model: HD-S2 1 Cam, HD-S2 2 Cam or any product related question please contact us at [email protected] ww.babysensemonitors.com HD S2 Video Baby Monitor isense Ltd. 27 Shaked St. evel Modi'in Industrial Park, 319900 ISRAEL User Manual By Follow these safety precautions to prevent fire, injury or damage to the product. Read and keep instructions: It is very important that you read all the safety and operating instructions before the Babysense video monitor is operated. Please retain your purchase receipt as you will need to produce it if warranty service is required. 1. Warnings and Safety Instructions WARNINGS: STRANGULATION HAZARD: Children can become entangled in cords. Make sure the Baby unit, Parent unit and mains adaptor cables are kept out of reach of your baby and other young children at all times, at least 6 feet away. CHOKING HAZARD: This product contains small parts which may cause chocking. Exercise care when unpacking and assembling the product and keep the small parts away from children. RISK OF SUFFOCATION: Keep all packaging materials and protective foils out of reach of children. DANGER FROM POWER CORDS: To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. Never place the Baby unit or Parent unit inside your baby's crib, bed or playpen. DO NOT HANDLE ROUGHLY, DROP OR THROW: Babysense video monitor is a high-quality electronic device which must be handled with care. This product is designed for INDOOR USE ONLY. WATER AND MOISTURE: The product should not be exposed to rain, moisture, or splashing. Never use or place the product in or near moisture or water. THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION: Your video monitor is designed to be an aid and should not be used as a substitute for responsible and proper adult supervision of a child. POWER SOURCE: This product should only be used with the AC power adapters supplied by the manufacturer, as included in this package. VENTILATION: This product should not be used on a bed, sofa, rug or similar surface that may block the ventilation or speaker openings, or be placed in an enclosed area, such as a bookcase or drawer that 1.2 Safety Instructions for AC Power Adapter may impede air flow. Never cover the product with clothes, towels, blankets or any other item. THIS PRODUCT IS NOT A TOY: It should be kept out of children's reach. KEEP AWAY FROM SOURCES OF HEAT: This unit should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat. The unit should not be left in direct sunlight. BATTERY: Before you use the product, we recommend you fully charge the battery of the Parent Unit, so that it continues to work if you disconnect it from the power supply to carry it to another location. INSTALLATION LOCATION: The installation location plays an important role in ensuring proper operation. Therefore, maintain a distance of at least 5 feet from other electronic equipment, such as microwave ovens or Wi−Fi routers, otherwise they could cause interference. If this occurs, move the baby and parent units to another location. RANGE: Range of all baby monitors is always measured in an open space. The actual range may be shortened due to environmental obstacles (such as concrete walls). DAMAGE REQUIRING SERVICE: This product should be serviced by qualified personnel only. DO NOT TRY TO OPEN AND REPAIR THE PRODUCT: If you have any problems with the product, please contact the authorized distributor. In case of unusual noises or smells originating from the device, immediately disconnect the product from the power outlet and contact authorized distributor. If the product becomes dirty, use a lightly damp soft cloth to wipe surfaces, taking care to not allow water into any openings. IMPORTANT: Babysense Video Monitor is designed only for hearing the baby’s voice and seeing the images of the baby. This product is not a medical device and should not be used as a substitute for responsible adult supervision. It is important that you regularly check on your baby personally. The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat. During continual use, the power adapters may become warm to the touch. This is normal and should not be a cause of concern. Examine intactness of the power cord and its plug. The adapter must be handled with care: Do not handle roughly, drop or throw. When removing the power adapter from the wall outlet, hold and pull from the receptacle. Do not pull on the cable itself or bend the cable as that will put additional stress on the cable and could lead to damages. Do not touch the power adapter with wet hands or allow liquids to spill on it. Make sure the mains adaptor cables are kept out of reach of your baby and other young children at all times. To avoid possible danger from power cords, the cords should be secured and never be hung on or near the crib. Do not replace the plugs or cable on your power adapter. This product should only be used with the AC 1.3 Safety Instructions for Li-ion battery (Non removable pre installed battery) 1.4 Information on disposal of product Do not replace the power cord with non-original substitutes. Improper connection may cause electrocution. Do not place the AC adaptor cable in a high wear and tear location. Never use a frayed or compromised cord. Intended for indoor use only. power adapters supplied by the manufacturer, as included in this package. Never cut, damage or bend the power cord. Do not put any objects on top of the power cord, which could cause overheating, damage, combustion and electrocution. Do not leave the power adapter connected to the wall outlet when it is not plugged into the Baby or Parent unit. WARNING: Do not attempt to repair or adjust any of the electrical or mechanical fu…

Text truncated - open the document above for the full version.

Test Model No.: HD S2RX RF Antenna Adapter 1: Adapter 2:

Label location

Model:HD S2RX Made in China INPUT:DC5V 1.0A Li-on Battery 3.7V,4000mAh FCC ID: 2AQVL-HDS2RX FCC ID: 2AQVL-HDS2TX INPUT:DC5V 1.0A Model:HD S2TX Made in China Prepared by:Denny Model:HD S2 Date:19-Oct.2020 S/N:RX2000001 S/N:RX2000001

Test Model No.: HD S2TX RF Antenna Port

FCC ID: 2AQVL-HDS2RX RF Exposure Evaluation Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation Channel Output power to antenna (dBm) Output power to antenna (mW) Power Density at R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result Lowest 12.029 15.955 0.00400 1.0 PASS Middle 11.679 14.720 0.00369 1.0 PASS Highest 12.392 17.346 0.00434 1.0 PASS Remark: Antenna gain is 1.00dBi.

Global United Technology Services Co., Ltd. Report No.: GTS202009000032F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 40 TEST REPORT Applicant: Babysense Dongguan Ltd. Address of Applicant: No. 1, Park Road, Dong keng Village, Dong Keng Town, Dong Guan City,Guang Dong Province, China Manufacturer/Factory: Babysense Dongguan Ltd. Address of Manufacturer/Factory: No. 1, Park Road, Dong keng Village, Dong Keng Town, Dong Guan City,Guang Dong Province, China Equipment Under Test (EUT) Product Name: baby monitor Model No.: HD S2RX, V50 RX Trade Mark: Babysense FCC ID: 2AQVL-HDS2RX Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of sample receipt: Sep. 02, 2020 Date of Test: Sep. 02 - 24, 2020 Date of report issued: Sep. 24, 2020 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.:GTS202009000032F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 40 2 Version Version No. Date Description 00 Sep. 24, 2020 Original Prepared By: Date: Sep. 24, 2020 Project Engineer Check By: Date: Sep. 24, 2020 Reviewer Report No.:GTS202009000032F01 Global United Technology Services Co., Ltd. No. 123-128, Tower A, Jinyuan Business Building, No.2, Laodong Industrial Zone, Xixiang Road, Baoan District, Shenzhen, Guangdong, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 40 3 Contents Page 1 COVER PAGE ................................................................................................................................................ 1 2 VERSION ........................................................................................................................................................ 2 3 CONTENTS .................................................................................................................................................... 3 4 TEST SUMMARY ........................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY .................................................................................................................. 4 5 GENERAL INFORMATION ............................................................................................................................ 5 5.1 GENERAL DESCRIPTION OF EUT ............................................................................................................... 5 5.2 TEST MODE .............................................................................................................................................. 7 5.3 TEST FACILITY .......................................................................................................................................... 7 5.4 TEST LOCATION ....................................................................................................................................... 7 5.5 OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................... 7 5.6 DESCRIPTION OF SUPPORT UNITS ............................................................................................................. 7 5.7 DEVIATION FROM STANDARDS ................................................................................................................... 7 5.8 ABNORMALITIES FROM STANDARD CONDITIONS ......................................................................................... 7 5.9 ADDITIONAL INSTRUCTIONS ....................................................................................................................... 7 6 TEST INSTRUMENTS LIST ........................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA .......................................................................................... 10 7.1 ANTENNA REQUIREMENT ......................................................................................................................... 10 7.2 CONDUCTED EMISSIONS ......................................................................................................................... 11 7.3 CONDUCTED PEAK OUTPUT POWER ........................................................................................................ 14 7.4 20DB EMISSION BANDWIDTH .................................................................................................................. 16 7.5 CARRIER FREQUENCIES SEPARATION ...................................................................................................... 18 7.6 HOPPING CHANNEL NUMBER .................................................................................................................. 20 7.7 DWELL TIME ........................................................................................................................................... 21 7.8 PSEUDORANDOM FREQUENCY HOPPING SEQUENCE ................................................................................ 25 7.9 BAND EDGE ........................................................................................................................................... 26 7.9.1 Conducted Emission Method ........................................................................................................... 26 7.9.2 Radiated Emission Method ...................................…

Text truncated - open the document above for the full version.

Test Model No.: HD S2RX Radiated Emission Conducted Emission