2AQYN-SWL2Satellite Communication Device

Somewear Labs 350 Brannan St, Ste 350 San Francisco CA 94107 Data Reference Declaration Letter 06/05/24 Dear Sir/Madam, Our device Satellite Communication Device (FCC ID: 2AQYN-SWL2, IC: 24246-SWL2) has installed Iridium radio module (FCC ID: Q639603N, IC: 4629A-9603N) and BT radio modules (FCC ID: XPYNORAB1, IC: 8595A-NORAB1). No hardware design changes are made on the modules, and the software has not been changed to increase the RF output power of the modules. Pursuant to KDB 996369 D02v01, original results are used in cases of leveraging original module certification. After spot checking to ensure the power is consistent with original certifications, it was determined that original test reports accurately represent test results under the new conditions. FCC ID, IC Cer)fica)on Number Grant Date Original Report Number Iridium radio module FCC ID: Q639603N IC: 4629A-9603N FCC: 08/27/2014 IC: 09/11/2014 Document 75926443 Report 05 Issue 2 BT radio modules FCC ID: XPYNORAB1 IC: 8595A-NORAB1 FCC: 06/25/2021 IC: 07/07/2021 AGC00174210102FE02 The Spurious Radiated Emissions and Power Limits for earth stations are tested on this host device, and the test report R2403043-247 and R2403043-25, are submitted additionally. Sincerely, James Kubik/ CEO (630) 415-8120 [email protected] 350 Brannan St, Ste 350 San Francisco, CA 94107 United States Somewear Labs, Inc. DocuSign Envelope ID: 6E068E2E-3809-416D-A041-7B4DB0F8C945

Somewear Labs 350 Brannan St, Ste 350 San Francisco CA 94107 Attestation Letter 04/14/24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i) Filing FCC ID: 2AQYN-SWL2 Somewear Labs, Inc. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, James Kubik/ CEO (630) 415-8120 [email protected] 350 Brannan St, Ste 350 San Francisco, CA 94107 United States Somewear Labs, Inc. DocuSign Envelope ID: ED865EE1-C91F-485E-B506-046584F0D10C

Somewear Labs 350 Brannan St, Ste 350 San Francisco CA 94107 Attestation Letter 04/14/24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2AQYN-SWL2 Somewear Labs, Inc. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, James Kubik/ CEO (630) 415-8120 [email protected] 350 Brannan St, Ste 350 San Francisco, CA 94107 United States Somewear Labs, Inc. DocuSign Envelope ID: ED865EE1-C91F-485E-B506-046584F0D10C

Somewear Labs 350 Brannan St, Ste 350 San Francisco CA 94107 Attestation Letter for Agent 04/14/24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911 (d)(7) Filing FCC ID: 2AQYN-SWL2 Somewear Labs, Inc. certifies that, as of the date of the filing of the application, Somewear Labs, Inc. is our designated U.S. agent for service of process for the above referenced FCC ID: 2AQYN- SWL2. Somewear Labs, Inc. agrees to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. Somewear Labs, Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company name: Somewear Labs, Inc. (FRN: 0027783794) Address: 350 Brannan St, Ste 350, San Francisco, California United States 94107 Contact person: James Kubik Tel: (630) 415-8120 Email: [email protected] Sincerely, Applicant Name Somewear Labs, Inc. Applicant Printed Name James Kubik Applicant Signature DocuSign Envelope ID: ED865EE1-C91F-485E-B506-046584F0D10C

Somewear Labs 350 Brannan St, Ste 350 San Francisco CA 94107 FCC Authorization 04/14/24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Somewear Labs, Inc., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely, James Kubik/ CEO (630) 415-8120 [email protected] 350 Brannan St, Ste 350 San Francisco, CA 94107 United States DocuSign Envelope ID: ED865EE1-C91F-485E-B506-046584F0D10C Somewear Labs 350 Brannan St, Ste 350 San Francisco CA 94107 Somewear Labs, Inc. DocuSign Envelope ID: ED865EE1-C91F-485E-B506-046584F0D10C

Somewear Labs 350 Brannan St, Ste 350 San Francisco CA 94107 FCC Confidential Authorization 04/14/24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2AQYN-SWL2 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Somewear Labs, Inc. hereby requests long-term confidential treatment of information accompanying this application as outlined below: • Block Diagram • Schematics • Operation Description As well as short-term confidential treatment of information accompanying this application as outlined below: • Internal Photos • User’s Manual • External Photos • Test Set-up Photos The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, James Kubik/ CEO (630) 415-8120 [email protected] 350 Brannan St, Ste 350 San Francisco, CA 94107 United States Somewear Labs, Inc. DocuSign Envelope ID: ED865EE1-C91F-485E-B506-046584F0D10C

Somewear Labs 350 Brannan St, Ste 350 San Francisco CA 94107 E-labeling Cover Letter 04/26/24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Innovation, Science and Economic Development Canada Certification and Engineering Bureau P.O. Box 11490, Station ‘H’ 3701 Carling Ave., Building 94 Ottawa, Ontario K2H 8S2, Canada FCC ID: 2AQYN-SWL2 IC: 24246-SWL2 Dear Sir/Madam, This device has its own mobile application to display the required label information electronically (e-label) in lieu of a physical label or nameplate. The end user can access the electronic label with three steps. The information of electronic label is programmed by Somewear Labs, Inc. and cannot be modified by any third party. Sincerely, James Kubik/ CEO (630) 415-8120 [email protected] 350 Brannan St, Ste 350 San Francisco, CA 94107 United States Somewear Labs, Inc. DocuSign Envelope ID: 9B25B57C-10FE-43AF-841E-5A4F2189A240

IC: 24246-9603N HVIN: 9603N IC: 3147A-BL652 HVIN: BL652-SC

© 2024 RF Exposure Lab, LLC This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. 802 N. Twin Oaks Valley Road, Suite 105 • San Marcos, CA 92069 • U.S.A. TEL (760) 471-2100 • FAX (760) 471-2121 http://www.rfexposurelab.com CERTIFICATE OF COMPLIANCE SAR EVALUATION Somewear Labs Dates of Test: April 10-11, 2024 1040 Mariposa Street Test Report Number: SAR.20240406 San Francisco, CA 94107 Revision A Lab Designation Number: US1195 This wireless mobile and/or portable device has been shown to be compliant for localized specific absorption rate (SAR) for uncontrolled environment/general exposure limits specified in ANSI C95.1 – 1999 Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz, ANSI C95.3 – 2002 Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields, IEEE Std.1528 – 2013 Recommended Practice and had been tested in accordance with the measurement procedures specified in KDB 447498 (See test report). I attest to the accuracy of the data. All measurements were performed by myself or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. RF Exposure Lab, LLC certifies that no party to this application is subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Jay M. Moulton Vice President Testing Cert. # 2387.01 FCC ID: 2AQYN-SWL2 Contains LoRa Module: Semtech Model SX1262 Contains Bluetooth Module: ublox Model NORA-B1 Model(s): SWL-2 Test Sample: Engineering Unit Same as Production Serial Number: NFBBJEXC7625 Equipment Type: Wireless Satellite Hotspot Classification: Portable Transmitter Next to Body TX Frequency Range: 1616 – 1626.5 MHz, 914 – 918 MHz, 920 – 924 MHz, 2402 – 2480 MHz Frequency Tolerance: ± 2.5 ppm Maximum RF Output: 1640 MHz – 32.0 dBm, 900 MHz – 29.0 dBm, 2450 MHz (BT) – 0.0 dBm Conducted Signal Modulation: TDMA/FDMA, LoRa FHSS Antenna Type: Internal Antenna Application Type: Certification FCC Rule Parts: Part 2, 15, 25 KDB Test Methodology: KDB 447498 D01 v06 Maximum SAR Value: 1.09 W/kg Reported Simultaneous SAR Value: 1.48 W/kg Reported Separation Distance: 0 mm Report Number: SAR.20240406 © 2024 RF Exposure Lab, LLC Page 2 of 75 This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. Table of Contents 1. Introduction ................................................................................................................................................ 4 SAR Definition [4] .......................................................................................................................................... 5 2. SAR Measurement Setup .......................................................................................................................... 6 Robotic System ............................................................................................................................................. 6 System Hardware .......................................................................................................................................... 6 System Electronics ........................................................................................................................................ 7 Probe Measurement System ......................................................................................................................... 7 3. Probe and Dipole Calibration ................................................................................................................... 14 4. Phantom & Simulating Tissue Specifications ........................................................................................... 15 Head & Body Simulating Mixture Characterization ....................................................................................... 15 5. ANSI/IEEE C95.1 – 1992 RF Exposure Limits [2] .................................................................................... 16 Uncontrolled Environment ............................................................................................................................ 16 Controlled Environment ............................................................................................................................... 16 6. Measurement Uncertainty ........................................................................................................................ 17 7. System Validation .................................................................................................................................... 18 Tissue Verification ....................................................................................................................................... 18 Test System Verification .............................................................................................................................. 18 8. SAR Test Data Summary ......................................................................................................................... 19 Procedures Used To Establish Test Signal .................................................................................................. 19 Device Test Condition .................................................................................................................................. 19 SAR Data Summary – 1640 MHz Body ....................................................................................................... 22 SAR Data Summary – 900 MHz Body LoRa 1 ............................................................................................. 23 SAR Data Summary – 900 MHz Body LoRa 2 .............................…

Text truncated - open the document above for the full version.

2J6933MPGFz-300LL100-C43NBST_300D302- C906N_CU017570 GNSS and IRIDIUM Magnetic/Adhesive Mount FEATURES Magnetic/Adhesive Mount Ground Plane Independent Cable 1: Iridium (1616-1627 MHz) Cable 2: GPS/GLONASS/QZSS/Galileo (1575-1610 MHz) IP67, IP69 89 x 76 x 27/30 mm Customized Cable and Connector ANTENNA AND ELECTRICAL SPECIFICATIONS Cable 1 Iridium Antenna Standards Iridium Band (MHz) 1621 Frequency(MHz) 1616-1627 Return Loss (dB) ~-12.5 VSWR ~1.6:1 Efficiency (%) ~57.1 Peak Gain (dBi) ~2.2 Average Gain (dB) ~-2.4 Radiation Pattern Hemispherical Polarization RHCP Connector Type SMA-Male Standard (Other Connectors Available) Cable Length 300 cm Standard (Any Cable Length Available) Cable Type D302 Standard (Other Cables Available) Antenna Measurement Conditions Mounted on Dunkin Device Measured in Certified CTIA 3D Anechoic Chamber Cable 2 GPS/GLONASS Antenna Standards GPS/QZSS/Galileo GLONASS Bands (MHz) 1575 1602 Frequency (MHz) 1575.42 1598-1606 Patch Size (mm) 25 x 25 x 4 Return Loss (dB) <=-15.0 dB VSWR <=1.4:1 dB Impedance 50 Radiation Pattern Hemispherical Polarization RHCP Saw Filter Pre-filter Active Gain (dB) 28 @ 2.7 V Noise Figure (dB) 1.5 Typ Voltage (V) 1.5 – 3.6 Current (mA) 9 Typ Power Consumption (mW) 24.3 Typ ESD Protection 2kV Connector Type SMA-Male Standard (Other Connectors Available) Cable Length (m) 300 cm Standard (Any Cable Length Available) Cable Type D100 Standard (Other Cables Available) MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS Specification 2J6933MPGFz-300LL100-C43NBST_300D302- C906N_CU017570 Mounting Type Magnetic/Adhesive Mount Dimensions (mm) 89 x 76 x 27/30 Radome Type ABS UV Stable Radome Color Black, White Operating Temperature (C) -40 to +85 Storage Temperature (C) -40 to +85 Ingress Protection IP67, IP69 Substance Compliance RoHS ANTENNA PARAMETERS CABLE 1: Iridium -15 -10 -5 0 1560157015801590160016101620163016401650166016701680 Return Loss (dB) Frequency (MHz) 0 1 2 3 4 5 1560157015801590160016101620163016401650166016701680 VSWR Frequency (MHz) 0 10 20 30 40 50 60 70 1605161016151620162516301635 Efficiency (%) Frequency (MHz) 0 1 2 3 1605161016151620162516301635 Peak Gain (dBi) Frequency (MHz) RADIATION PATTERNS RADIATION PATTERN REFERENCE -3 -2 -1 0 1605161016151620162516301635 Average Gain (dB) Frequency (MHz) CABLE 1: Iridium 1621 MHz RADIATION PATTERN ANTENNA DRAWINGS ANTENNA IMAGES

2JCP2542601a_CU017570 Iridium Ceramic Thru-Hole Mount FEATURES Thru-Hole Mount Ground Plane Independent Iridium (1616-1627 MHz) 25 x 25 x 4 mm ANTENNA AND ELECTRICAL SPECIFICATIONS 2JCP2542601a_CU017570 Standard Iridium Band (MHz) 1621 Frequency(MHz) 1616-1627 Return Loss (dB) ~-10.9 VSWR ~1.8:1 Efficiency (%) ~55.5 Peak Gain (dBic) ~2.2 Average Gain (dB) ~-2.6 Impedance 50 Axial Ratio (dB) 3 max Radiation Pattern Hemispherical Polarization RHCP Antenna Measurement Conditions Mounted on Ground Plane of 70 x 70 mm Measured in Certified CTIA 3D Anechoic Chamber MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS Specification 2JCP2542601a_CU017570 Mounting Type Thru-Hole Mount Dimensions (mm) 25 x 25 x 4 Operating Temperature (C) -40 to +85 Storage Temperature (C) -40 to +85 Substance Compliance RoHS ANTENNA PARAMETERS -20 -15 -10 -5 0 1590160016101620163016401650 Return Loss (dB) Frequency (MHz) 0 2 4 6 8 1590160016101620163016401650 VSWR Frequency (MHz) 0 10 20 30 40 50 60 70 1612161516181621162416271630 Efficiency (%) Frequency (MHz) 0 1 2 3 1612161516181621162416271630 Peak Gain (dBi) Frequency (MHz) RADIATION PATTERN REFERENCE -3 -2 -1 0 1612161516181621162416271630 Average Gain (dB) Frequency (MHz) 1621 MHz RADIATION PATTERN ANTENNA DRAWINGS Patch dimensions Layout for top layer Layout for bottom layer ANTENNA IMAGES

Document 75926443 Report 05 Issue 2 August 2014 Report On FCC and Industry Canada Testing of the Iridium Communications Inc. 9603N In accordance with FCC CFR 47 Part 2, FCC CFR 47 Part 25 and Industry Canada RSS-170 COMMERCIAL-IN-CONFIDENCE FCC ID: Q639603N IC: 4629A-9603N TÜV SÜD Product Service, Octagon House, Concorde Way, Segensworth North, Fareham, Hampshire, United Kingdom, PO15 5RL Tel: +44 (0) 1489 558100. Website: www.tuv-sud.co.uk COMMERCIAL-IN-CONFIDENCE Document 75926443 Report 05 Issue 2 Page 1 of 47 COMMERCIAL-IN-CONFIDENCE REPORT ON FCC and Industry Canada Testing of the Iridium Communications Inc. 9603N In accordance with FCC CFR 47 Part 2, FCC CFR 47 Part 25 and Industry Canada RSS-170 Document 75926443 Report 05 Issue 2 August 2014 PREPARED FOR Iridium Communications Inc. 1750 Tysons Boulevard Suite 1400 McLean VA 22102 United States PREPARED BY Natalie Bennett Senior Administrator, Technical Solutions APPROVED BY Mark Jenkins Authorised Signatory DATED 07 August 2014 This report has been up issued to Issue 2 to include an amended model number. ENGINEERING STATEMENT The measurements shown in this report were made in accordance with the procedures described on test pages. All reported testing was carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47 Part 2, FCC CFR 47 Part 25 and Industry Canada RSS-170. The sample tested was found to comply with the requirements defined in the applied rules. Test Engineer(s); G Lawler M Russell Document 75926443 Report 05 Issue 2 Page 2 of 47 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE CONTENTS Section Page No 1 REPORT SUMMARY ................................................................................................................... 3 1.1 Introduction ................................................................................................................................... 4 1.2 Brief Summary of Results ............................................................................................................. 5 1.3 Application Form ........................................................................................................................... 6 1.4 Product Information ...................................................................................................................... 7 1.5 Test Conditions ............................................................................................................................. 8 1.6 Deviations from the Standard ....................................................................................................... 8 1.7 Modification Record ...................................................................................................................... 8 2 TEST DETAILS ............................................................................................................................ 9 2.1 Frequency Tolerance .................................................................................................................. 10 2.2 Emission Limitations ................................................................................................................... 12 2.3 Power Limits ............................................................................................................................... 28 2.4 Modulation Characteristics ......................................................................................................... 30 2.5 Limits on Emissions from Mobile Earth Stations for Protection of Aeronautical Radionavigation- Satellite Service .......................................................................................................................... 33 2.6 Occupied Bandwidth ................................................................................................................... 39 3 TEST EQUIPMENT USED ......................................................................................................... 42 3.1 Test Equipment Used ................................................................................................................. 43 3.2 Measurement Uncertainty .......................................................................................................... 45 4 ACCREDITATION, DISCLAIMERS AND COPYRIGHT ............................................................ 46 4.1 Accreditation, Disclaimers and Copyright ................................................................................... 47 Document 75926443 Report 05 Issue 2 Page 3 of 47 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE SECTION 1 REPORT SUMMARY FCC and Industry Canada Testing of the Iridium Communications Inc. 9603N In accordance with FCC CFR 47 Part 2, FCC CFR 47 Part 25 and Industry Canada RSS-170 Document 75926443 Report 05 Issue 2 Page 4 of 47 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFIDENCE 1.1 INTRODUCTION The information contained in this report is intended to show the verification of FCC and Industry Canada Testing of the Iridium Communications Inc. 9603N to the requirements of FCC CFR 47 Part 2, FCC CFR 47 Part 25 and Industry Canada RSS-170. Objective To perform FCC and Industry Canada Testing to determine the Equipment Under Test's (EUT’s) compliance with the Test Specification, for the series of tests carried out. Manufacturer Iridium Communications Inc Model Number(s) 9603N Serial Number(s) 124, 130 Number of Samples Tested 2 Test Specification/Issue/Date FCC CFR 47 Part 2 (2013) FCC CFR 47 Part 25 (2013) Industry Canada RSS-170 (2011) Incoming Release Date Application Form 22 May 2014 Disposal Reference Number Date Held Pending Disposal Not Applicable Not Applicable Order Number Date 23491/WH 07 April 2014 Start of Test 23 May 2014 Finish of Test 5 June 2014 Name of Engineer(s) G Lawler M Russell Related Document(s) ANSI C63.4 (2003) RSS-GEN Issue 3 December 2012 Document 75926443 Report 05 Issue 2 Page 5 of 47 COMMERCIAL-IN-CONFIDENCE COMMERCIAL-IN-CONFI…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA*, NIST, or any agency of the Federal Government. * This report may contain data that are not covered by the A2LA accreditation and are marked with an asterisk “*” (Rev.2) FCC TITLE 47 PART 25 ISEDC RSS-170 ISSUE 4 TEST AND MEASUREMENT REPORT For Somewear Labs, Inc. 350 Brannan Street, Suite 350, San Francisco, CA 94107, USA FCC ID: 2AQYN-SWL2 IC: 24246-SWL2 R e p o r t T y p e : O r i g i n a l R e p o r t P r o d u c t T y p e : S a t e l l i t e Co m m u n i c a t i o n D e v i c e Prepared By Will Hu Test Engineer Report Number R2403043-25 Report Date 2024-05-07 Reviewed By Christian McCaig RF Lead Engineer Bay Area Compliance Laboratories Corp. 1274 Anvilwood Avenue, Sunnyvale, CA 94089, USA Tel: (408) 732-9162, Fax: (408) 732 9164 Somewear Labs, Inc. FCC ID: 2AQYN-SWL2, IC: 24246-SWL2 Report Number: R2403043-25 Page 2 of 15 FCC Part 25 ISED RSS-170 Test Report TABLE OF CONTENTS 1 General Description ..................................................................................................................................................... 4 1.1 Product Description for Equipment Under Test (EUT) ...................................................................................... 4 1.2 Mechanical Description of EUT ......................................................................................................................... 4 1.3 Objective ............................................................................................................................................................. 4 1.4 Related Submittal(s)/Grant(s) ............................................................................................................................. 4 1.5 Test Methodology ............................................................................................................................................... 4 1.6 Measurement Uncertainty ................................................................................................................................... 5 1.7 Test Facility Registrations .................................................................................................................................. 5 1.8 Test Facility Accreditations ................................................................................................................................ 5 2 System Test Configuration.......................................................................................................................................... 8 2.1 Justification ......................................................................................................................................................... 8 2.2 EUT Exercise Software....................................................................................................................................... 8 2.3 Equipment Modifications.................................................................................................................................... 9 2.4 Power Supply ...................................................................................................................................................... 9 2.5 Local Support Equipment ................................................................................................................................... 9 2.6 Remote Support Equipment ................................................................................................................................ 9 2.7 Interface Ports and Cabling ................................................................................................................................. 9 3 Summary of Test Results ............................................................................................................................................ 10 4 FCC 47 CFR §25.204, ISEDC RSS-170 – Power Limits for earth stations ............................................................ 11 4.1 Applicable Standards ........................................................................................................................................ 11 4.2 Test Procedure .................................................................................................................................................. 11 4.3 Test Setup Diagram .......................................................................................................................................... 11 4.4 Test Environmental Conditions ........................................................................................................................ 11 4.5 Test Equipment List and Details ....................................................................................................................... 12 4.6 Test Results ....................................................................................................................................................... 12 5 Annex A - EUT External Photographs ...................................................................................................................... 13 6 Annex B - EUT Internal Photographs ....................................................................................................................... 14 7 Annex C (Normative) - A2LA Electrical Testing Certificate ................................................................................... 15 Somewear Labs, Inc. FCC ID: 2AQYN-SWL2, IC: 24246-SWL2 Report Number: R2403043-25 Page 3 of 15 FCC Part 25 ISED RSS-170 Test Report DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revisio…

Text truncated - open the document above for the full version.