2AR2STAA6709True wireless sports headphones

Rev 1/26/2023 (MMD Hong Kong Holding Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-18-2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AR2STAA6709 [MMD Hong Kong Holding Limited] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Tomas Guan) Rev 1/26/2023 (MMD Hong Kong Holding Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 08-18-2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AR2STAA6709 [MMD Hong Kong Holding Limited] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Tomas Guan)

Revision: 1Form: RFT-AMER-TCB-OP-19o Date: 1/25/2023 [MMD Hong Kong Holding Limited] Attention: Application Examiner Re: Certification designating a U.S. agent for service of process pursuant to section 2.911(d)(7) of the FCC rules To whom it may concern, This letter is to confirm both [TPV-USA Corp ] Agentand [MMD Hong Kong Holding Limited] Aacknowledge consent to obligations of each party pursuant to 47 CFR part §2.911(d)(7) of the FCC rules in regard to the agent for service of process. I [ Tomas Guan] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Applicant. I further acknowledge the requirement to maintain an agent extends for no less than one year after the termination of all marketing and importation or the conclusion of and commission-related proceeding involving the equipment and agree to immediately notify the FCC if there is any change in the status identified above. Applicant : MMD Hong Kong Holding LimitedCompany Name : Tomas GuanContact Name Address Telephone No Email: [email protected] FRN: 0028068138 Signature: ____________________________________ Date: ____________________________________ I [ Gcoff Bostwick] HEREBY CERTIFY THAT I am authorized to make the representations above on behalf of the Agent. I consent to the obligation to accept service of process on behalf of the applicant in regard to the FCC ID designated above. Agent : TPV-USA CorpCompany Name : Gcoff BostwickContact Name : 6525 Carnegie Blvd., Suite #200 Charlotte, NC 28211Address : 980-890-7523Telephone No : [email protected] Signature: ____________________________________ Date : ____________________________________ 2023-3-17 2023-3-17 : 0033543315FRN FCC ID : Units 1208-11,12th Floor,C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon,Hong Kong : 2AR2STAA6709 : 86-755-36358341

MMD Hong Kong Holding Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-08-18 SUBJECT: FCC ID: 2AR2STAA6709 To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Regards, MMD Hong Kong Holding Limited ------------------------------- （Tomas Guan）

(Must be signed by the person that is listed on the FCC Website) Date: 2024-08-18 SUBJECT: FCC Application for (FCC ID: 2AR2STAA6709) To Whom It May Concern: We, the undersigned, hereby declare that the PCB Layout of the left and right earbuds is basically mirrored. Regards, Tomas Guan (MMD Hong Kong Holding Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046

Family model description Letter Page 1 of 1 (MMD Hong Kong Holding Limited) (Current Date) 2024-08-18 FCC ID：2AR2STAA6709 Product name True wireless sports headphones Brand name PHILIPS Test Model name TAA6709 Additional model name TAA6709xx/yy (xx=AA-ZZ or blank denoted different color; yy=00-99 denoted different country destination) Deviation of models All models are identical except model name. Signature: Name: Tomas Guan Title: Safety & Approbation Manager Company Name : MMD Hong Kong Holding Limited Company Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong

(MMD Hong Kong Holding Limited) Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AR2STAA6709 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (Block Diagram, Schematics, Operational Description) (Block Diagram, Schematics, Operational Description) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Short-term confidentiality period: 180 days Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name (External Photos, Test Setup Photos, Manual, Internal Photos) (External Photos, Test Setup Photos, Manual, Internal Photos,) Sincerely, (printed name) Tomas Guan

(MMD Hong Kong Holding Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-08-18 SUBJECT: FCC Application for FCC ID: 2AR2STAA6709 To Whom It May Concern: We, the undersigned, hereby authorize _Dragon Long at Hwa-Hsing (Dongguan) Testing Co., Ltd._ on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by _ Dragon Long at Hwa-Hsing (Dongguan) Testing Co., Ltd. on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Tomas Guan (Must be signed by the person that is listed on the FCC Website)

Label Location 4pt font is not achievable due to product dimensions. Pursuant to FCC KDB 784748 D01 section 3. certification numbers are included in user quide. Below is an excerpt of the Manual.

FCC SAR Test Report Report Format Version 5.0.0 Issued Date : Aug. 07, 2024 Report No. : W7L-P24070001SA01 Appendix D. Photographs of EUT and Setup

FCC SAR Test Report Report Format Version 5.0.0Page No. : 1 of 25 Report No. : W7L-P24070001SA01Issued Date : Aug. 07, 2024 FCC SAR Test Report Report No. : W7L-P24070001SA01 Applicant : MMD Hong Kong Holding Limited Address : Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Manufacturer : MMD Hong Kong Holding Limited Address : Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Product : True wireless sports headphones FCC ID : 2AR2STAA6709 Brand : PHILIPS Model No. : TAA6709, TAA6709xx/yy (xx=AA-ZZ or blank denoted different color; yy=00-99 denoted different country destination) Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2013 KDB 865664 D01 v01r04 / KDB 865664 D02 v01r02 / KDB 447498 D01 v06 Date of Testing : Aug. 01, 2024 FCC Designation No. : CN1171 FCC Site Registration No. : 525120 CERTIFICATION: The above equipment have been tested by BV 7LAYERS COMMUNICATIONS TECHNOLOGY (SHENZHEN) CO. LTD., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by A2LA or any government agencies . Prepared By : Approved By : Jerry Chen / Engineer Luke Lu / Manager This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about- us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. FCC SAR Test Report Report Format Version 5.0.0Page No. : 2 of 25 Report No. : W7L-P24070001SA01Issued Date : Aug. 07, 2024 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2.Description of Equipment Under Test ................................................................................................................................. 5 3.SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 13 3.4 SAR Measurement Procedure ................................................................................................................................... 14 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 14 3.4.2 Volume Scan Procedure .......................................…

Text truncated - open the document above for the full version.

1 Customer name ： CE-2203B Material category BT antenna Ant Type： FPC Antenna Version： V1.0 Date： 2024.06.28 Shenzhen Cicent communication technology Co., LTD Antenna Part Specification Jiahe Project name 3 1. The report of passive data Angilent E5071C Left ear BT antenna S11 parameters 4 -3.142400 24.20-6.16 -2.792410 25.45-5.94 -2.562420 26.02-5.85 -2.352430 27.00-5.69 -2.242440 27.65-5.58 -2.192450 27.38-5.63 -2.332460 26.69-5.74 -2.402470 26.69-5.74 -2.702480 25.77-5.89 AVG -2.52 -5.80 26.32 Left ear antenna 3D direction diagram: -4.782400 9.62-10.17 -4.592410 10.10-9.96 -4.592420 10.37-9.84 -4.672430 10.47-9.80 -4.612440 10.77-9.68 -4.772450 10.72-9.70 -4.452460 11.22-9.50 -4.292470 11.44-9.41 -4.532480 10.95-9.61 AVG -4.59 -9.74 10.63 Left ear BT antenna efficiency and gain: Left ear free space Left ear head mold Frequency （ MHz ） Gain (dBi) Efficiency (dB) Efficiency % Frequency MHz Gain (dBi) Efficiency (dB) Efficiency % 5 Left ear antenna 2D direction diagram: Theta=90.00deg Phi=0.00deg Phi=90.00deg 6 TRP（dBm）ChannelL TIS（dBm） -88.93.6CH 0 -89.75.2CH 39 -88.33.1CH 78 TRP（dBm）ChannelL TIS（dBm） -85.1-0.2CH 0 -85.91.6CH 39 -85.0-0.2CH 78 OTA Standard Chamber N/AC7 0ΩL9 N/AC5 2: BT antenna 3D darkroom data Free space headform No. Match Value 3: Matching circuit 7 4: Structure drawing file

1 Antenna Part Specification Customer name ： CE-2203B Material category BT antenna Ant Type： FPC Antenna Version： V1.0 Date： 2024.06.28 Jiahe Project name 3 Angilent E5071C Right ear BT antenna S11 parameters 1. The report of passive data 4 -2.822400 22.95-6.39 -2.602410 24.15-6.17 -2.202420 26.34-5.79 -2.212430 27.09-5.67 -1.922440 29.87-5.25 -1.612450 32.15-4.93 -1.862460 30.81-5.11 -2.052470 30.10-5.21 -2.232480 29.39-5.32 AVG -2.17 -5.54 28.09 Right ear antenna 3D direction diagram: -6.092400 9.38-10.28 -5.702410 9.93-10.03 -4.922420 11.30-9.47 -4.242430 12.49-9.03 -4.082440 12.30-9.10 -3.912450 12.32-9.09 -3.832460 12.19-9.14 -3.742470 12.00-9.21 -3.772480 11.73-9.31 AVG -4.48 -9.41 11.52 Right ear BT antenna efficiency and gain: Right ear free space ear head mold Frequency （ MHz ） Gain (dBi) Efficiency (dB) Efficiency % Frequency MHz Gain (dBi) Efficiency (dB) Efficiency % Right 5 Right ear antenna 2D direction diagram: Theta=90.00deg Phi=0.00deg Phi=90.00deg 6 R Channel TRP（dBm） TIS（dBm） CH 0 4.1 -88.7 CH 39 5.0 -89.2 CH 78 3.0 -88.5 R Channel TRP（dBm） TIS（dBm） CH 0 -0.6 -85.2 CH 39 0.4 -85.8 CH 78 -1.4 -84.5 OTA Standard Chamber C7 N/A L9 0Ω C5 N/A 2: BT antenna 3D darkroom data Free space headform No. Match Value 3: Matching circuit 7 4: Structure drawing file

Lab: Hwa-Hsing (Dongguan) Testing Co., Ltd. Address: No.101, Building N1, Yuyuan 2 Road, Yuyuan Industrial Park, HuangJiang Town, Dongguan City, People’s Republic of China Tel: 0769-83078199 Web.: www.hwa-hsing.com E- Mail: [email protected] Release Ver. 1.5 Page 1 of 47 Test Report No.: 2405290042-RF-US-02 FCC Part 15, Subpart C Test Report FCC ID: 2AR2STAA6709 Applicant: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Manufacturer: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Product(s): True wireless sports headphones Brand(s): PHILIPS or Test Model(s): TAA6709 Series Model(s): See section 2.1 Test Date: Jun. 28, 2024 ~ Jul. 19, 2024 Issued Date: Aug. 01, 2024 Issued By: Hwa-Hsing (Dongguan) Testing Co., Ltd. Address: No.101, Building N1, Yuyuan 2 Road, Yuyuan Industrial Park, HuangJiang Town, Dongguan City, People’s Republic of China Test Firm Registration No.: 915896 Designation No.: CN1255 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Hwa-Hsing (Dongguan) Testing Co., Ltd., and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : Reviewed by : Nature Lee Dragon Long Approved by : Scott He “This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. Our report includes all the tests requested by you and the results thereof based upon the information that you provided to us. The report would be invalid without specific stamp of test institute and the signatures of tester and approver.” Lab: Hwa-Hsing (Dongguan) Testing Co., Ltd. Address: No.101, Building N1, Yuyuan 2 Road, Yuyuan Industrial Park, HuangJiang Town, Dongguan City, People’s Republic of China Tel: 0769-83078199 Web.: www.hwa-hsing.com E-Mail: [email protected] Release Ver. 1.5 Page 2 of 47 Test Report No.: 2405290042-RF-US-02 Table of Contents Release Control Record .................................................................................................................................. 4 1. Summary of Test Results .......................................................................................................................... 5 1.1 Measurement Uncertainty ..................................................................................................................... 5 1.2 Modification Record .............................................................................................................................. 5 2. General Information ................................................................................................................................... 6 2.1 General Description of EUT .................................................................................................................. 6 2.2 Description of Test Channels ................................................................................................................ 7 2.3 Test Mode Applicability and Tested Channel Detail ............................................................................. 7 2.4 Description of Support Units ................................................................................................................. 9 2.5 Configuration of System under Test ..................................................................................................... 9 2.6 Duty Cycle of Test Signal ................................................................................................................... 10 3. Test Types and Results ........................................................................................................................... 11 3.1 Radiated Emission and Band-edge Measurement ............................................................................. 11 3.1.1 Limits of radiated emission and band-edge measurement ...................................................... 11 3.1.2 Test Instruments ....................................................................................................................... 12 3.1.3 Test Procedures ....................................................................................................................... 13 3.1.4 Deviation from Test Standard ................................................................................................... 14 3.1.5 Test Setup ................................................................................................................................ 15 3.1.6 EUT Operating Conditions ........................................................................................................ 16 3.1.7 Test Results .............................................................................................................................. 17 3.2 Conducted Emission Measurement .................................................................................................... 24 3.2.1 Limits of Conducted Emission Measurement ........................................................................... 24 3.2.2 Test Instruments ....................................................................................................................... 24 3.2.3 Test Procedures ....................................................................................................................... 25 3.2.4 Test Set…

Text truncated - open the document above for the full version.