2AR2STAS2000Wireless Speaker

Wireless Speaker TAS2000 User manual Register your product and get support at www.philips.com/support EN1 Play from Bluetooth-enabled devices 45 5 5 5 6 5 5 5 Connect the speaker to your Bluetooth device Philips Entertainment App 68 8 9 App Download Choose your sound Select source Product information 7 Other features 5 7 Important12 10 Troubleshooting 8 10 Notice 9 11 2 9 2 Safety Get started34 4 4 Charge the built-in battery Turn on/off 7 7 Adjust lighting Listen to an external devices Your wireless speaker23 3 3 What's in the box Overview of the speaker Contents Care for your product Bluetooth indicator Control playback Adjust volume level Control phone call Play from Auracast Play from USB EN2 Disposing a battery into �re or a hot oven, mechanically crushing or cutting a battery can result in an explosion. 1Important Safety Important safety instructions • Make sure that the power supply volt age corresponds to the voltage on th e back or the underside of the unit. • The speaker shall not be exposed to d ripping or splashing. • Do not place any source of danger on thespeaker(e.g.liquid�lled objects, l it candles). • Make sure that there is enough free s pace around the speaker for ventilati on. • Please use the speaker safely in an en vironment with temperature betwee • Only use attachments and accessories speci�ed by the manufacturer. n 0 and 40. Battery safety precautions •Danger of explosion if a battery is incorrectly replaced. Replace only with the same or equivalent type. •A battery (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, �re or the like. •A battery in extreme high or low temperatures during use, storage or transportation, and low air pressure at high altitude can pose safety hazards. •Do not replace a battery with an incorrect type that can defeat a safeguard (for example, some lithium battery types). • • • • Leaving a battery in an extremely high temperature surrounding, or an extremely low air pressure environment may result in an �ammableofleakageorexplosion liquid or gas. Warning •Never remove the casing of this speaker. •Never lubricate any part of this speaker. Place this speaker on a �at, hard and stable surface. • •Never place this speaker on other electrical equipment. •Only use this speaker indoors. Keep this speaker away from water, moisture and liquid-�lled objects. •Keep this speaker away from direct sunlight, naked �ames or heat. •Risk of explosion if a battery is replaced by an incorrect type. Care for your product Use only micro�ber cloth to clean the product. Please note that your device contains built-in lithium batteries. The charging capacity of lithium batteries will decrease over time due to their self-discharge characteristics. To ensure the longevity of your device's battery, we recommend charging the built-in lithium battery to around 50% every 6 months when the device is not in use. Overview of the speaker 2Your wireless speaker What's in the box EN3 Check and identify the contents of your package: Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that philips offers, register your product at www.philips.com/support. Speaker (attached lanyard) USB cable Quick start guide / safety sheet / warranty 8 9 Play or pause the audio playback / Answer or reject a call Turn the speaker on or off Adjust the volume down 9 Connect external audio devices AUDIO IN Charge the build-in battery IN / OUT Power / Bluetooth / Stereo status indication 8 Adjust the volume up Bluetooth / Stereo connection Select Auracast source Use only a USB cable speci�ed by the manufacturer or sold with this speaker. Press to turn the speaker on. You will hear the prompt sound. To turn the speaker off, press again. You will hear the prompt sound. Risk of electric shock! When unplug the USB cable, always pull the plug from the socket. Never pull the cable. Risk of speaker damage! Make sure the power supply voltage corresponds to the voltage printed on the back or the underside of the speaker Fully charge the built-in battery before using. The speaker will turn off automatically if there is no audio signal from Bluetooth for 15 minutes. Note Note Caution Charge the built-in battery Turn on/off 3Get started EN4 When the speaker is being charged the LED indicator turns red. When the speaker is fully charged the LED indicator goes off. Always follow the instructions in this chapter in sequence. The speaker is powered by a built-in rechargeable battery. Connect the USB-C socket on the speaker to an outlet (5V 2A) by using the provided USB cable. 5V 2A When battery level less than 20%, you will hear voice prompt once every 60 second. When battery level less than 2%, the speaker will power off. EN5 Note Connect the speaker to your Bluetooth device 1.Press to turn the speaker on. lt will enter Bluetooth pairing mode automati- cally with white light blinking slow. You can also press to enter Bluetooth pairing mode. 2. Enable Bluetooth and select “Philips S2000” in the Bluetooth list on your device for pairing. 3. Play audio on your Bluetooth device to start streaming music. 4Play from Bluetooth devices With this speaker, you can enjoy audio from your Bluetooth device. Make sure that the Bluetooth function is enabled on your device. The maximum distance for pairing the speaker and your Bluetooth device is 30 meters (99 feet). Keep away from any other electronic device that may cause interference. Press to pause or resume play Press twice to play the next track Press three times to play the previous track During playing the music Control playback Press to answer or end a call Press and hold to reject a call Control phone call Play from Auracast Short press to decrease/increase one level of volume Long press to decrease/increase continuously the volume Adjust the volume Reconnecting the last connected device Blink blue quickly Blink blue slowly LED indication Bluetooth status Solid blue Ready for pairing Connect…

Text truncated - open the document above for the full version.

U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: TPV-USA Corp Contact Name: Gcoff Bostwick Street Address: 6525 Carnegie Blvd., Suite #200 Charlotte, NC 28211 City/Province/Zip: NA Telephone No: 980-890-7523 Email: [email protected] FRN #: 0033543315 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Nov.27, 2025 Signed by (Gcoff Bostwick / Manager): The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: MMD Hong Kong Holding Limited FCC ID: 2AR2STAS2000 FRN #: 0028068138 Contact Name: Tomas Guan Street Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Telephone No: 86-755-36358341 Extension: -- Email: [email protected] Applicant Signature 1 : Date: Nov. 27, 2025 Signed by (Tomas Guan / Safety & Approbation Manager): 1 - Letters must be placed on appropriate letterhead. The signee for the applicant must be one of the following: Applicant (grantee) contact of record in the FCC’s authorization system, or authorized officers or employee of the applicant (grantee).

MMD Hong Kong Holding Limited 092723-17 rev 10 Certification Application Attestation Statements Date: December 3, 2025 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: Statement for 47 CFR section 2.911(d)(5)(i) ______ MMD Hong Kong Holding Limited ______ certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment 1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: <N/A> Statement for 47 CFR section 2.911(d)(5)(ii) _____ MMD Hong Kong Holding Limited ______ (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is /  - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. The applicant also certifies that the device does not have cybersecurity and/or anti-virus software produced by Kaspersky Lab, Inc or any of its successors and assignees identified on the covered list installed on the device, nor will it be installed by the applicant any time after certification. Thank you, By: __________________________ ________ Tomas Guan__________ (Signature 2 ) (Print name) Title: ___ Safety & Approbation Manager ____ Company: __MMD Hong Kong Holding Limited__ Telephone: _____86-755-36358341______ 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters must be placed on appropriate letterhead.

MMD Hong Kong Holding Limited Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong 050222-17 Request for Confidentiality Date: December 3, 2025 Subject: Confidentiality Request for: ____ 2AR2STAS2000___ Pursuant to FCC 47 CFR 0.457(d) and 0.459 and/or IC RSP-100, Section 12.4, the applicant requests that a part of the subject application(s) be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☐ Short Term --------------------------- External Photos ☐ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term --------------------------- Test Setup Photos ☐ Short Term ☐ Permanent * 1 User’s Manual _____ MMD Hong Kong Holding Limited______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Sincerely, By: (Signature/Title 2 ) Safety & Approbation Manager (Print name) Tomas Guan The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

MMD Hong Kong Holding Limited 050222-17 Authority to Act as Agent Date: December 3, 2025 American Certification Body, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 To Whom It May Concern: ______ Shenzhen UnionTrust Quality and Technology Co., Ltd.______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: _____ 12 months___ By: __________________________ ____ Tomas Guan ____ (Signature 1 ) (Print name) Title: __Safety & Approbation Manager ___ On behalf of: ___ MMD Hong Kong Holding Limited __ (Company Name) Telephone: 86-755-36358341 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

MMD Hong Kong Holding Limited Product Similarity Declaration Product name: Wireless Speaker Model name: TAS2000,TAS2000B/00,TAS2000W/00,TAS2000B/37, TAS2000W/37,TAS2000B/61,TAS2000W/61,TAS2000B/10,T AS2000W/10TAS2000B/12,TAS2000W/12,TAS2000x/yy(x=A- Z or Nil ,for the production or package color, yy-00-99 or Nil ,for the country code) We (MMD Hong Kong Holding Limited) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), except the product color and model number for marketing purpose. Signature: Name: Title: Safety & Approbation Manager Place, date Hong Kong

Page 1 of 3 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT EXTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 3 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com EUT Photo EUT Photo Page 3 of 3 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com EUT Photo EUT Photo

2025 02 25 V0.2 S2000 冯柳 TAS2000B-PGD Port cover High-gloss transparent UV align center

Page 1 of 6 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com APPENDIX 2 PHOTOS OF EUT CONSTRUCTIONAL DETAILS EUT INTERNAL PHOTOS EUT Photo EUT Photo Page 2 of 6 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com EUT Photo EUT Photo Page 3 of 6 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com EUT Photo BT Antenna EUT Photo Page 4 of 6 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com EUT Photo EUT Photo Page 5 of 6 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com EUT Photo EUT Photo Page 6 of 6 FCC ID: 2AR2STAS2000 IC: 24589-TAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com EUT Photo EUT Photo

Page 1 of 21 Report No.: 25103020558EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 TEST REPORT Product Name: Wireless Speaker Trade Mark: PHILIPS or Model No.: TAS2000 Add. Model No.: TAS2000B/00, TAS2000W/00, TAS2000B/37, TAS2000W/37, TAS2000B/61, TAS2000W/61, TAS2000B/10, TAS2000W/10, TAS2000B/12, TAS2000W/12, TAS2000x/yy(x=A-Z or Nil ,for the production or package color, yy-00-99 or Nil ,for the country code) Report Number: 25103020558EMC-1 Test Standards: FCC 47 CFR Part 15 Subpart B ICES-003 Issue 7 FCC ID: 2AR2STAS2000 Test Result: PASS Date of Issue: December 1, 2025 Prepared for: MMD Hong Kong Holding Limited Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Prepared by: Shenzhen UnionTrust Quality and Technology Co., Ltd. 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China TEL: +86-755-2823 0888 FAX: +86-755-2823 0886 Prepared by: Reviewed by: David Chen Kevin Liang Senior Project Engineer Assistant Manager Approved by: Date: December 1, 2025 Billy Li Technical Director Page 2 of 21 Report No.: 25103020558EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 Version Version No. Date Description V1.0 December 1, 2025 Original Page 3 of 21 Report No.: 25103020558EMC-1 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] http://www.uttlab.com UTTR-EMC-ICES003-V1.2 CONTENTS 1. GENERAL INFORMATION ....................................................................................................................................... 4 1.1 CLIENT INFORMATION ........................................................................................................................................ 4 1.2 EUT INFORMATION ............................................................................................................................................ 4 1.2.1 GENERAL DESCRIPTION OF EUT ............................................................................................................ 4 1.2.2 DESCRIPTION OF ACCESSORIES .............................................................................................................. 4 1.3 DESCRIPTION OF SUPPORT UNITS ...................................................................................................................... 5 1.4 TEST LOCATION ................................................................................................................................................. 5 1.5 TEST FACILITY ................................................................................................................................................... 5 1.6 DEVIATION FROM STANDARDS ............................................................................................................................ 5 1.7 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 5 1.8 OTHER INFORMATION REQUESTED BY THE CUSTOMER ........................................................................................ 5 1.9 MEASUREMENT UNCERTAINTY ........................................................................................................................... 6 2. TEST SUMMARY ...................................................................................................................................................... 7 3. EQUIPMENT LIST .................................................................................................................................................... 8 4. TEST CONFIGURATION .......................................................................................................................................... 9 4.1 ENVIRONMENTAL CONDITIONS FOR TESTING ........................................................................................................ 9 4.1.1 NORMAL OR EXTREME TEST CONDITIONS ............................................................................................... 9 4.1.2 RECORD OF NORMAL ENVIRONMENT AND TEST SAMPLE ........................................................................... 9 4.2 TEST MODES ..................................................................................................................................................... 9 4.3 TEST SETUP .................................................................................................................................................... 10 4.3.1 FOR RADIATED EMISSIONS TEST SETUP ................................................................................................ 10 4.3.2 FOR CONDUCTED EMISSIONS TEST SETUP ............................................................................................ 11 4.4 SYSTEM TEST CONFIGURATION ........................................................................................................................ 11 5. REFERENCE DOCUMENTS FOR TESTING ......................................................................................................... 12 6. EMC REQUIREMENTS SPECIFICATION .............................................................................................................. 12 6.1 RADIATED EMISSION ............................................…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2AR2STAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com APPENDIX 1 PHOTOS OF TEST SETUP Radiated emission Test Setup-1 (30 MHz~1 GHz) Radiated emission Test Setup-2 (Above 1 GHz) Page 2 of 2 FCC ID: 2AR2STAS2000 Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: 16/F, Block A, Building 6th, Baoneng Science and Technology Park, Longhua Street, Longhua District, Shenzhen, China Tel: +86-755-28230888 Fax: +86-755-28230886 E-mail: [email protected] Http://www.uttlab.com Conducted Emission Test Setup-3