2AR2STAV3000Turntable

Turntable TAV3000B User manual Register your product and get support at: www.philips.com/support EN 1 Contents 1Important Trademarks Safety 2 2 2 2 Your turntable Intorduction What's in the box 3 3 3 Overview of the main unit 4 10 3 Get started Connect power Adjust volume level Power on 7 7 7 7 4 Phono operate Clear Bluetooth® pairing records Play from vinyl records Stop playing vinyl records 8 8 8 Replace the stylus9 9 Remove the dust cover 5Listen to Bluetooth® music Connect Bluetooth® Disconnect Bluetooth® 10 10 10 6 Auracast™ operate Disconnect Auracast™ receiver Auracast™ receiver 11 11 11 Auracast™ broadcast11 Disconnect Auracast™ broadcast 12 7 Bluetooth-Out operation (BT-OUT) Connect to Bluetooth enabled device 12 Disconnect BT-OUT 12 Headphone output 12 10 Product information Speci�cations 20 20 Compliance 22 11 Troubleshooting 21 12 Notice 22 13 Listen to an external device 13 8 Other features 13 User guide 14 18 App download 14 Pair the App with your turntable 9 Philips Entertainment App Choose your sound Select source 14 15 15 Firmware upgrade 18 Remote control 19 Select Auracast™ broadcast 16 Select Bluetooth Out(BT OUT) Receive Auracast™ broadcast 16 Receive unencrypted Auracast™ broadcast 17 17 2 EN 1 Important Safety Read and understand all instructions before you use this turntable. If damage is caused by failure to follow the instructions, the warranty does not apply. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO OUALIFIED SERVICE PERSONNEL. This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of �re or electric shock, the device should not be exposed to rain or moisture and objects �led with liquids, such as vases, should not be placed on the device. CAUTION: To prevent electric shock, fully insert the plug. (For regions with polarized plugs: To prevent electric shock, match wide blade to wide slot.) Warning Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never look into the laser beam inside this apparatus. Never place this apparatus on other electrical equipment. Keep this apparatus away from direct sunlight, naked �ames or heat. Ensure that you always have easy access to the power cord, plug or adaptor to discon- nect the apparatus from the power. Make sure that there is enough free space around the product for ventilation. Only use attachments/accessories specifed by the manufacturer. The product shall not exposed to dripping or splashing. Do no place any source of danger on the product (e.g. liquid �lled objects. lit candles). Where the MAlNS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Please use the product safety in an environment with temperature between 0°C and 40°C. Note The type plate is located on the bottom of the product. Trademarks The Auracast™ word mark and logos are trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners. The making of unauthorized copies of copy-protected material, including computer programs, �les, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SlG, Inc. and any use of such marks by MMD Hong Kong Holding Limited is under license. EN 3 2Your turntable Congratulations on your purchase, and welcome to Philips! To fully bene�t from the support that Philips offers, register your product at www.philips.com/support. What's in the box Check and identify the contents of your package: Introduction With this turntable, you can • Play from vinyl records; • Listen to music via Bluetooth; • Play music from Audio in; • Enjoy music throught headphone; • Support Bluetooth out and Aux out; • Support Auracast™ receiver & Auracast™ broadcast; • Use App to control the unit. • Main unit • Power adaptor • Slipmat • 45 rpm adaptor • Quick start guide • Safey sheet Warranty card • Note •Power adaptor quantity and plug type vary by regions. Images, illustrations and drawings shown on this user manual are for reference only. Actual product may vary in appearance. • Safety information LED 1 indicator BT OUT Press to turn power on/off. Switch source (Phono/Bluetooth/Audio in). Auracast ™ /BT Out LED indicator. Function status (see below table ). Source LED indicator. Function status (see below table ). Skip to the next track. Next Auracast ™ broadcast channel. In Auracast receiver mode, press to rescan Auracast ™ broadcast channel. Press to switch to Auracast ™ receiver mode. Press and hold for more than 3 seconds to activate / deactivate Auracast ™ broadcast mode. Connect the headphone. Press to enable to BT Out. VOLUME knob Adjust volume level. LED 2 indicator Skip to the previous track. Previous Auracast ™ broadcast channel. Play or pause. Pairing mode. 123456789 9 10 10 EN 4 Overview of the main unit Press and hold to disable to BT Out. LED 2 St atus Blink Cyan ( slow) Auracast ™ r eceiver s canning Solid Cyan Auracast ™ r eceiver c onnected Blink Cyan ( very slow) Auracast ™ receiver i dle Solid AmberEncrypted Auracast ™ b roadcas tt Blink Amber (fas t) Deactivated encrypted Auracast ™ broadcas t Solid Purple Unencrypted Auracast ™ broadcas t Blink P urple (fas t) Deactivated unencrypted Auracast ™ b roadcas t Blink White (slow) BT Out pai ring Solid White BT Out connected Blink White (fas t) BT O…

Text truncated - open the document above for the full version.

Rev 1/26/2023 MMD Hong Kong Holding Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-11-2025 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AR2STAV3000 MMD Hong Kong Holding Limited (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. MMD Hong Kong Holding Limited (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Tomas Guan) Rev 1/26/2023 (MMD Hong Kong Holding Limited) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11-11-2025 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AR2STAH2209 MMD Hong Kong Holding Limited (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Tomas Guan)

2AR2STAV3000

MMD Hong Kong Holding Limited Date: 2025-11-11 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AR2STAV3000 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Tomas Guan Grantee Contact’s Signature MMD Hong Kong Holding Limited

Model Declaration Letter Date: 2025-11-11 We, the undersigning company Company Name: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon Hong Kong Hereby confirm that the following products: Product description: Turntable Type Design: TAV3000B/37, TAV3000/10, TAV3000/12, TAV3000/37, TAV3000/61, TAV3000/98, TAV3000/yy(yy=00-99 or Nil, for country code), TAV3000B/10, TAV3000B/12, TAV3000B/61, TAV3000B/98, TAV3000x/yy(x=A-Z or nil, for product and package color,yy=00-99 or nil,for the country code) Brand: PHILIPS or FCC ID: 2AR2STAV3000 The differencesof model name show below: Models TAV3000B/37 TAV3000/10, TAV3000/12, TAV3000/37, TAV3000/61, TAV3000/98, TAV3000/yy(yy=00-99 or Nil, for country code), TAV3000B/10, TAV3000B/12, TAV3000B/61, TAV3000B/98, TAV3000x/yy(x=A-Z or nil, for product and package color,yy=00-99 or nil,for the country code) are different as follow. Only the model names are different, in order to distinguish the sales market Signature: Name: Tomas Guan Telephone: 86-755-36358341 E-mail: [email protected]

MMD Hong Kong Holding Limited Declaration of Authorization We Name: MMD Hong Kong Holding Limited Address: Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon Hong Kong China Declare that: Name Representative of agent: Ms. Rose Liu Agent Company name: BTL Inc. Address: No.3,Jinshagang 1st Road, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification of the following product(s) and signing all the related documents including 731 forms: Product description: Wireless on-ear headphones Type designation: TAV3000B/37,TAV3000/10, TAV3000/12, TAV3000/37, TAV3000/61, TAV3000/98, TAV3000/yy(yy=00-99 or Nil, for country code),TAV3000B/10, TAV3000B/12, TAV3000B/61, TAV3000B/98, TAV3000x/yy(x=A-Z or nil, for product and package color,yy=00-99 or nil,for the country code) Trademark:PHILIPS or FCC ID: 2AR2STAV3000 on our behalf. Date:2025-11-11 City: Hong Kong Name: Tomas Guan Function: Safety & Approbation Manager Signature:

Project No.: 2504C050B Page 2 of 19 Project No.: 2504C050B Page 3 of 19 Project No.: 2504C050B Page 4 of 19 Project No.: 2504C050B Page 5 of 19 Project No.: 2504C050B Page 6 of 19 Project No.: 2504C050B Page 7 of 19

Label location

Project No.: 2504C050B Page 1 of 19 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2504C050B Page 8 of 19 Antenna Antenna Project No.: 2504C050B Page 9 of 19 Project No.: 2504C050B Page 10 of 19 Project No.: 2504C050B Page 11 of 19 Project No.: 2504C050B Page 12 of 19 Project No.: 2504C050B Page 13 of 19 Project No.: 2504C050B Page 14 of 19 Project No.: 2504C050B Page 15 of 19 Project No.: 2504C050B Page 16 of 19 Project No.: 2504C050B Page 17 of 19

Project No.: 2504C050B Page 18 of 19 Project No.: 2504C050B Page 19 of 19

Report No.: BTL-FCCP-3-2504C050B Report Version: R01 Page 1 of 4 FCC RF EXPOSURE REPORT FCC ID: 2AR2STAV3000 Project No. : 2504C050B Equipment : Turntable Brand Name : PHILIPS or Test Model : TAV3000B/37 Model Name : TAV3000B/37, TAV3000/10, TAV3000/12, TAV3000/37, TAV3000/61, TAV3000/98, TAV3000/yy(yy=00-99 or Nil, for country code), TAV3000B/10, TAV3000B/12, TAV3000B/61, TAV3000B/98, TAV3000x/yy(x=A-Z or nil, for product and package color,yy=00-99 or nil,for the country code) Hardware Version : V02 Software Version : V48 Applicant : MMD Hong Kong Holding Limited Address : Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Manufacturer : MMD Hong Kong Holding Limited Address : Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Factory : ZhongShan City Li Tai Electronic Industrial Co., Ltd. Address : 3rd Industrial District, Wuguishan , ZhongShan 528458 GUANGDONG P.R. CHINA Date of Receipt : Sep. 30, 2025 Date of Test : Oct. 09, 2025 ~ Oct. 30, 2025 Issued Date : Dec. 08, 2025 Test Sample : Engineering Sample No.: DG92025093028 Standard(s) : FCC Guidelines for Human Exposure IEEE C95.1 & FCC Part 2.1091 FCC Title 47 Part 2.1091 & KDB 447498 D01 v06 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Antony Liang Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : + 8 6-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-3-2504C050B Report Version: R01 Page 2 of 4 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-3-2504C050B R00 Original Report. Nov. 18, 2025 In valid BTL-FCCP-1-2504C050B R01 It is a revision of the report BTL-FCCP-3-2504C050B R00, with the following revisions: a. Modified the antenna information on page 3. So, re-calculated the results about RF Module 2# AB5307U. This is a newly released report, replacing the BTL-FCCP-3-2504C050B R00 report. Dec. 08, 2025 Valid Report No.: BTL-FCCP-3-2504C050B Report Version: R01 Page 3 of 4 1. MPE CALCULATION METHOD Calculation Method of RF Safety Distance: where: S = power density P = power input to the antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna 2. ANTENNA SPECIFICATION For RF Module 1#BT8961D: Ant. Manufacturer Model Name Antenna Type Connector Gain (dBi) 1 Shenzhen Yunding Communication Electronics Co., Ltd SY-WIFI-01-1.13 Internal IPEX 2.19 For RF Module 2# AB5307U: Ant. Manufacturer Model Name Antenna Type Connector Gain (dBi) 2 Shenzhen Yunding Communication Electronics Co., Ltd SY-WIFI-01-1.13 Internal IPEX 2.21 Note: The antenna gain is provided by the manufacturer. Report No.: BTL-FCCP-3-2504C050B Report Version: R01 Page 4 of 4 3. CALCULATED RESULT For BT: For RF Module 1# BT8961D Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2.19 1.6558 5.64 3.6644 0.00121 1 Complies For RF Module 2# AB5307U Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2.21 1.6634 -7.09 0.1954 0.00006 1 Complies For LE: For RF Module 1# BT8961D Antenna Gain (dBi) Antenna Gain (numeric) Max. Output Power (dBm) Max. Output Power (mW) Power Density (S) (mW/cm 2 ) Limit of Power Density (S) (mW/cm 2 ) Test Result 2.19 1.6558 3.29 2.1330 0.00070 1 Complies Note: (1) The calculated distance is 20 cm. End of Test Report

P R OJ E C T： TAV3000 DESCRIPTION ： ANT1：SY-WIFI-01-1.13-L300MM-IPEX1 PART NO. ： CUS PART NO. ： D A T E ： 2025-4-17 APPRO VAL SHEET TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City 1.Testing projects and equipment test projectequipment 1.S11 Specifications （S-parameter） 1.return loss （Return Loss） 2.Voltage Standing Wave Ratio（VSWR） Network Analyzer: Agilent E5071B HP 8753D 2.Active testing （Active ） 1.transmit power （TRP） 2.reception sensitivity（TIS） 1.darkroom：ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2.Comprehensive Tester: Agilent 8960 E5515B ×2 StarPoint SP6011 Cmw500 3. Passive Test （Passive） 1.Antenna gain （ Gain ） 2.Antenna efficiency （Efficiency） 1.darkroom：ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2.Network Analyzer：Agilent E5071B HP 8753D TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City 2.Antenna performance SWR TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City 3.Antenna efficiency and gain TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City 4. Antenna structure diagram: 1 TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City Electrical technical parameters Electrical Specifications Frequency Range2400~2500 MHz VSWR ≤1.5 Input Impedance50 Ω Maximum gain2.19 DBI Maximum Input Power 50W Mechanical Specifications Wire ColorBlack Input connectorIPEX 1 Wire length 300 MM Working Temperature -40°C~+85°C Working Humidity20~80% TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City

P R OJ E C T： TAV3000 DESCRIPTION ： ANT2：SY-WIFI-01-1.13-L100MM-IPEX1 PART NO. ： CUS PART NO. ： D A T E ： 2025-12-8 APPRO VAL SHEET TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City 1.Testing projects and equipment test projectequipment 1.S11 Specifications （S-parameter） 1.return loss （Return Loss） 2.Voltage Standing Wave Ratio（VSWR） Network Analyzer: Agilent E5071B HP 8753D 2.Active testing （Active ） 1.transmit power （TRP） 2.reception sensitivity（TIS） 1.darkroom：ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2.Comprehensive Tester: Agilent 8960 E5515B ×2 StarPoint SP6011 Cmw500 3. Passive Test （Passive） 1.Antenna gain （ Gain ） 2.Antenna efficiency （Efficiency） 1.darkroom：ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2.Network Analyzer：Agilent E5071B HP 8753D TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City 2.Antenna performance SWR TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City 3.Antenna efficiency and gain TEL+86 0755-23073599FAX+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City 1 TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City Electrical technical parameters Electrical Specifications Frequency Range2400~2500 MHz VSWR ≤1.5 Input Impedance50 Ω Maximum gain 2.21 DBI Maximum Input Power 50W Mechanical Specifications Wire ColorBlack Input connectorIPEX 1 Wire length 100 MM Working Temperature -40°C~+85°C Working Humidity20~80% TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen Yunding Communications Electronics Co., Ltd Address: Room 3015, Jinchu Center, Aviation Road, Bao'an District, Shenzhen City

Report No.: BTL-FCCP-2-2504C050B Report Version: R00 Page 1 of 68 FCC Radio Test Report FCC ID: 2AR2STAV3000 This report concerns: Original Grant Project No. : 2504C050B Equipment : Turntable Brand Name : PHILIPS or Model Name : TAV3000B/37, TAV3000/10, TAV3000/12, TAV3000/37, TAV3000/61, TAV3000/98, TAV3000/yy(yy=00-99 or Nil, for country code), TAV3000B/10, TAV3000B/12, TAV3000B/61, TAV3000B/98, TAV3000x/yy(x=A-Z or nil, for product and package color,yy=00-99 or nil,for the country code) Applicant : MMD Hong Kong Holding Limited Address : Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Manufacturer : MMD Hong Kong Holding Limited Address : Units 1208-11, 12th Floor, C-Bons International Center, 108 Wai Yip Street, Kwun Tong, Kowloon, Hong Kong Factory : ZhongShan City Li Tai Electronic Industrial Co., Ltd. Address : 3rd Industrial District, Wuguishan , ZhongShan 528458 GUANGDONG P.R. CHINA Date of Receipt : Sep. 30, 2025 Date of Test : Oct. 09, 2025 ~ Oct. 30, 2025 Issued Date : Nov. 18, 2025 Test Sample : Engineering Sample No.: DG92025093027 for AC Power Line Conducted and Radiated, DG92025093028 for conducted. Standard(s) : FCC CFR Title 47, Part 15, Subpart C The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. (Dongguan) Prepared by : Antony Liang Approved by : Chay Cai No.3, Jinshagang 1st Road, Dalang, Dongguan, Guangdong People’s Republic of China. Te l : +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2504C050B Report Version: R00 Page 2 of 68 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL assumes no responsibility for the data provided by the customer, any statements, inferences or generalizations drawn by the customer or others from the reports issued by BTL. The report must not be used by the client to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2504C050B Report Version: R00 Page 3 of 68 Table of Contents Page REVISION HISTORY 6 1 . APPLICABLE STANDARDS 7 2 . SUMMARY OF TEST RESULTS 7 2.1 TEST FACILITY 8 2.2 MEASUREMENT UNCERTAINTY 8 2.3 TEST ENVIRONMENT CONDITIONS 9 3 . GENERAL INFORMATION 10 3.1 GENERAL DESCRIPTION OF EUT 10 3.2 DESCRIPTION OF TEST MODES 12 3.3 PARAMETERS OF TEST SOFTWARE 13 3.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 14 3.5 SUPPORT UNITS 14 3.6 CUSTOMER INFORMATION DESCRIPTION 14 4 . AC POWER LINE CONDUCTED EMISSIONS 15 4.1 LIMIT 15 4.2 TEST PROCEDURE 15 4.3 DEVIATION FROM TEST STANDARD 15 4.4 TEST SETUP 16 4.5 EUT OPERATING CONDITIONS 16 4.6 TEST RESULTS 16 5 . RADIATED EMISSIONS 17 5.1 LIMIT 17 5.2 TEST PROCEDURE 18 5.3 DEVIATION FROM TEST STANDARD 19 5.4 TEST SETUP 19 5.5 EUT OPERATING CONDITIONS 21 5.6 TEST RESULT - 9 KHZ TO 30 MHZ 21 5.7 TEST RESULT - 30 MHZ TO 1000 MHZ 21 5.8 TEST RESULT - ABOVE 1000 MHZ 21 6 . BANDWIDTH 22 6.1 LIMIT 22 Report No.: BTL-FCCP-2-2504C050B Report Version: R00 Page 4 of 68 Table of Contents Page 6.2 TEST PROCEDURE 22 6.3 DEVIATION FROM STANDARD 22 6.4 TEST SETUP 22 6.5 EUT OPERATION CONDITIONS 22 6.6 TEST RESULTS 22 7 . MAXIMUM OUTPUT POWER 23 7.1 LIMIT 23 7.2 TEST PROCEDURE 23 7.3 DEVIATION FROM STANDARD 23 7.4 TEST SETUP 23 7.5 EUT OPERATION CONDITIONS 23 7.6 TEST RESULTS 23 8 . CONDUCTED SPURIOUS EMISSION 24 8.1 LIMIT 24 8.2 TEST PROCEDURE 24 8.3 DEVIATION FROM STANDARD 25 8.4 TEST SETUP 25 8.5 EUT OPERATION CONDITIONS 25 8.6 TEST RESULTS 25 9 . POWER SPECTRAL DENSITY 26 9.1 LIMIT 26 9.2 TEST PROCEDURE 26 9.3 DEVIATION FROM STANDARD 26 9.4 TEST SETUP 26 9.5 EUT OPERATION CONDITIONS 26 9.6 TEST RESULTS 26 10 . MEASUREMENT INSTRUMENTS LIST 27 11 . EUT TEST PHOTO 29 APPENDIX A - AC POWER LINE CONDUCTED EMISSIONS 35 APPENDIX B - RADIATED EMISSION - 9 KHZ TO 30 MHZ 38 APPENDIX C - RADIATED EMISSION - 30 MHZ TO 1000 MHZ 43 APPENDIX D - RADIATED EMISSION - ABOVE 1000 MHZ 46 Report No.: BTL-FCCP-2-2504C050B Report Version: R00 Page 5 of 68 Table of Contents Page APPENDIX E - BANDWIDTH 59 APPENDIX F - MAXIMUM OUTPUT POWER 62 APPENDIX G - CONDUCTED SPURIOUS EMISSION 64 APPENDIX H - POWER SPECTRAL DENSITY 67 Report No.: BTL-FCCP-2-2504C050B Report Version: R00 Page 6 of 68 REVISION HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2504C050B R00 Original Report. Nov. 18, 2025 V…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-1-2504C050B Report Version: R00 Page 30 of 98 13. EUT TEST PHOTO AC Power Line Conducted Emissions Test Photos Report No.: BTL-FCCP-1-2504C050B Report Version: R00 Page 31 of 98 Radiated Emissions Test Photos 9 kHz to 30 MHz Report No.: BTL-FCCP-1-2504C050B Report Version: R00 Page 32 of 98 Radiated Emissions Test Photos 30 MHz to 1000 MHz Report No.: BTL-FCCP-1-2504C050B Report Version: R00 Page 33 of 98 Radiated Emissions Test Photos Band edge & Harmonic(1 GHz to 18 GHz) Report No.: BTL-FCCP-1-2504C050B Report Version: R00 Page 34 of 98 Radiated Emissions Test Photos Harmonic(18 GHz to 26.5 GHz) Report No.: BTL-FCCP-1-2504C050B Report Version: R00 Page 35 of 98 Conducted Test Photos