2AR4R-MSPB5010Magnetic wireless power bank

FCC STATEMENT : This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Model: MS PB5010 Product: Magnetic wireless power bank Capacity: 5000mAh Type-c Input5V/3A;9V/2A; 12V/1.5A Type-c Onput5V/3A;9V/2.22A; 12V/1.67A Wireless charging Output: 5W/7.5W/10W/15W

Section Company n Address: 28 Product Na FCCID: 2A Model(s): M MSPB5047 2.911(d)(5 ) We, [ENC A is sought th  Pro  Ide n Yours sinc e Name: Ke v Signature: Title and C o NOTE 1 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal R e https://www.fe munications-s 2.911(d) name: ENCA 82 DuPont A ame: Magne R4R-MSPB MSPB5010, 7, MSPB505 )(i) Equipm ASED PROD hrough certi hibited from ntified as an erely, vin Zhu ompany na ” ; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t EN )(5)(i) Ce ASED PRO Ave. Newbu etic wireless B5010 MSPB501 1 58, MSPB5 mentType DUCTS INC ification is n m receiving n equipmen me: Manag e of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the NCASED ertificatio ODUCTS IN urgh, NY 12 s power ban 1, MSPB50 059 C] (“the app not: an equipm e nt type in the er / ENCAS and Services C list SearchResul t 63 published o nts/2023/02/06 D PROD on – Equi NC 2550 nk 22, MSPB 5 licant”) cert ent authoriz e “Covered SED PRODU Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ DUCTS I 2. ipmentTy 5023, MSPB tify that the zation pursu List” NOTE 1 UCTS INC ection 2 of Th witch=P&id=32 /protecting-ag NC 911 (d)(5)(i) Eq ype B5034, MSP equipment uant to § 2.9 Da e Secure Netw 5672 ainst-national - quipment Type A PB5035, MS for which a 903; of the F ate: Jul. 03, works Act, ava -security-threa Attestation v1.2 SPB5046, authorization FCC rules. 2023 ailable at ats-to-the-com 2 n m

Section Company n Address: 28 Product Na FCCID: 2A Model(s): M MSPB5047 2.911(d)(5 ) We, [ENCA application §1.50002 o Yours sinc e Name: Ke v Signature: Title and C o NOTE 1 Delete option NOTE 2 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal R e https://www.fe munications-s 2.911(d) name: ENCA 82 DuPont A ame: Magne R4R-MSPB MSPB5010, 7, MSPB505 )(ii) Applica ASED PROD , the applica of this chapt erely, vin Zhu ompany na not applicable ”; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t EN )(5)(ii) Ce ASED PRO Ave. Newbu etic wireless B5010 MSPB501 1 58, MSPB5 ant filing DUCTS INC ant is not id ter,as an en me: Manag e e to this applic of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the NCASED ertificatio ODUCTS IN urgh, NY 12 s power ban 1, MSPB50 059 C] (“the app dentified NO ntity produci er / ENCAS cation. and Services C list SearchResul t 63 published o nts/2023/02/06 D PROD on – App NC 2550 nk 22, MSPB 5 plicant”) cert TE 1 on the “C ing covered SED PRODU Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ DUCTS I plicant (C 5023, MSPB tify that, as Covered Lis dcommunica UCTS INC ection 2 of Th witch=P&id=32 /protecting-ag NC 2.911 (d)(5 Covered L B5034, MSP of the date st” NOTE 2 ,esta ations equip Da e Secure Netw 5672 ainst-national - 5)(ii) Applicant A List ) PB5035, MS of the filing ablished pu pment. ate: Jul. 03, works Act, ava -security-threa Attestation v1.3 SPB5046, g of the ursuant to 2023 ailable at ats-to-the-com 3 m

ENCASED PRODUCTS INC Agent Authorization Company: ENCASED PRODUCTS INC Address: 282 DuPont Ave. Newburgh, NY 12550 Product Name: Magnetic wireless power bank Model Number(s): MSPB5010, MSPB5011, MSPB5022, MSPB5023, MSPB5034, MSPB5035, MSPB5046, MSPB5047, MSPB5058, MSPB5059 Product Description: Magnetic wireless power bank We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Jul. 03, 2023 Name: Kevin Zhu Title: Manager Company: ENCASED PRODUCTS INC

Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b In addi t in Title busine s authoriz For 4 O For 1 It is ou r corresp docume authoriz Sincer e Signatu Name: Title: M of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2AR4R-M om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schemat Block Di Parts Lis Operatio Tune-up tional to abo 47 CFR §2 ss sensitive zed devices External Test Set Internal P User Ma 45 days, pu OR 180 days pu r understand pondence du ents and thi zation is iss ely, ure: Kevin Zhu anage r E ing Techno cations Com s Road 046 for Confiden MSPB5010 Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp tic Diagram agram st onal Descrip Procedure ove mention .803 and th informatio n s, we reque Photos tup Photos Photos anual rsuant to P u ursuantto KD ding that all uring the ce s informatio sued. NCASE logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption ned docume e importatio n remains c st Short Te ublic Notice DB 726920 l measurem ertification re on will be av ED PROD ssion’s rule old the follow nitely. m and equi e equipmen ould give co ents, in orde on rules in T confidential rm Confide e DA 04-170 0 D01. ment test rep eview proce vailable for DUCTS s Title 47 S wing attach pment desc nt. The publ ompetitors a er to comply Title 47 CFR until the act ntiality of th 05. ports, FCC ess cannot public revi e INC Sections §0. hment(s) as criptions an ic disclosu r an unfair ad y with the m R §2.1204, tual market he following ID label for be granted ew once the Date: Jul. 0 457 and §0 confidentia d are consi re of these d vantage in marketing re while ensu ting of newly attachmen mat and as confide n e grant of eq 03, 2023 0.459, we al dered as documents the market . egulations ring that y t(s); ntial quipment .

To W We, Num MSP elec MSP Ple a Sig Na m Title Whom It Ma , ENCASED mber: MSPB PB5046, MS ctric circuit a PB5010. ase contact m nature: me: e: Mo ay Concern D PRODUC B5010, MSP SPB5047, M are the sam me if you hav Kevin Zh u Manager ENCAS odel Di , CTS INC (M PB5011, MS MSPB5058 me, only with ve any quest u SED PRO fferenc agnetic wire SPB5022, M , MSPB505 h model nam tion. ODUCTS ce Dec eless powe MSPB5023 59; All mode med differe S INC claratio r bank); Tra , MSPB503 el’s the func nt. Test sam Date: on ade Mark: N 34, MSPB50 ction, softwa mple model Jul. 03, 2 0 None, Mode 035, are and : 023 el

Annex A External Photos Model No.: MSPB5010 Page 1 of 3 Model No.: MSPB5010 Page 2 of 3 Model No.: MSPB5010 Page 3 of 3

FCC ID LABEL: Ca: 10 x 30mm Label Location FCC ID: 2AR4R-MSPB5010

Annex B Internal Photo Model No.: MSPB5010 Page 1 of 3 Model No.: MSPB5010 Page 2 of 3 Antenna Model No.: MSPB5010 Page 3 of 3

Page 1 of 17 Report No.: HK2306142499-2E FCC TEST REPORT Test report On Behalf of ENCASED PRODUCTS INC For Magnetic wireless power bank Model No.: MSPB5010, MSPB5011, MSPB5022, MSPB5023, MSPB5034, MSPB5035, MSPB5046, MSPB5047, MSPB5058, MSPB5059 FCC ID: 2AR4R-MSPB5010 Prepared For : ENCASED PRODUCTS INC 282 DuPont Ave. Newburgh, NY 12550 Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jun. 14, 2023 ~ Jun. 25, 2023 Date of Report: Jun. 25, 2023 Report Number: HK2306142499-2E Page 2 of 17 Report No.: HK2306142499-2E TEST RESULT CERTIFICATION Applicant’s name.................. : ENCASED PRODUCTS INC Address .................................. : 282 DuPont Ave. Newburgh, NY 12550 Manufacture's Name ............ : ENCASED PRODUCTS INC Address .................................. : 282 DuPont Ave. Newburgh, NY 12550 Product description Trade Mark: N/A Product name ............................ : Magnetic wireless power bank Model and/or type reference : MSPB5010, MSPB5011, MSPB5022, MSPB5023, MSPB5034, MSPB5035, MSPB5046, MSPB5047, MSPB5058, MSPB5059 Standards .............................. : FCC CFR 47 PART 18, KDB680106 D01 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ........................................... : Date (s) of performance of tests ............. : Jun. 14, 2023 ~ Jun. 25, 2023 Date of Issue .......................................... : Jun. 25, 2023 Test Result .............................................. : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 17 Report No.: HK2306142499-2E Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Channel List Channel Frequency (KHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 01 128 The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. 2. SUMMARY OF TEST RESULTS 2.1. Test procedures according to the technical standards: FCC KDB680106 D01 RF Exposure Wireless Charging Apps v03r01 FCC CFR 47 Standard Section Test Item Judgment Remark FCC CFR 47 part1, 1.1310 KDB680106 D01v03r01 (3)(3) Electric Field Strength (E) (V/m) PASS Magnetic Field Strength (H) (A/m) PASS 2.2. Measurement Uncertainty The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 All emissions, radiated(<30M)(9KHz-30MHz) ±3.90dB 2 Temperature ±0.5°C 3 Humidity ±2% Page 4 of 17 Report No.: HK2306142499-2E 2.3. Operation of EUT during testing The equipment under test(EUT) was configured to measure its highest possible emission level. The test modes were adapted according to the operation manual for use, more detailed description as follows: Test Mode Description Remark DC mode: OUT Wireless: 15W AC mode: OUT Wireless: 15W Connect to the adapter Note: All modes are tested, and the report shows only the worst mode data. 2.4. Test Instruments Description Brand Model No. Frequency Range Calibrated Date Calibrated Until Exposure Level Te s t e r narda ELT-400 N-0231 Feb. 17, 2023 Feb. 16, 2024 Magnetic field probe 100cm 2 narda ELT probe 100cm2 B-0324 Feb. 17, 2023 Feb. 16, 2024 NOTE: 1. The calibration interval of the above test instruments is 12 months. Page 5 of 17 Report No.: HK2306142499-2E 3. MAXIMUM PERMISSIBLE EXPOSURE Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density. Note 2: For the applicable limit, see FCC 1.1310, 680106 D01 RF Exposure Wireless Charging Apps v03r01. Note 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Page 6 of 17 Report No.: HK2306142499-2E 4. TEST PROCEDURE a. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance 0-20cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 0-20 cm measured from the center of the probe(s) to the edge of the device. 4.1 Test Setup DC Mode: AC Mode: 4.2 Result of Maximum Permissible Exposure Page 7 of 17 Report No.: HK2306142499-2E DC Mode: For Full load mode: H-Field Strength at 0-20 cm from the edges surrounding the EUT (A/m) Measuring distance (cm) Field strength Test Position A Test Position B Test Position C Test Positio n D Test Position E Test Position F Limits (A…

Text truncated - open the document above for the full version.

Page 1 of 23 Report No.: HK2306142499-1E FCC TEST REPORT Test report On Behalf of ENCASED PRODUCTS INC For Magnetic wireless power bank Model No.: MSPB5010, MSPB5011, MSPB5022, MSPB5023, MSPB5034, MSPB5035, MSPB5046, MSPB5047, MSPB5058, MSPB5059 FCC ID: 2AR4R-MSPB5010 Prepared For : ENCASED PRODUCTS INC 282 DuPont Ave. Newburgh, NY 12550 Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jun. 14, 2023 ~ Jun. 25, 2023 Date of Report: Jun. 25, 2023 Report Number: HK2306142499-1E Page 2 of 23 Report No.: HK2306142499-1E TEST RESULT CERTIFICATION Applicant’s name.................. : ENCASED PRODUCTS INC Address .................................. : 282 DuPont Ave. Newburgh, NY 12550 Manufacture's Name ............ : ENCASED PRODUCTS INC Address .................................. : 282 DuPont Ave. Newburgh, NY 12550 Product description Trade Mark: None Product name ............................ : Magnetic wireless power bank Model and/or type reference : MSPB5010, MSPB5011, MSPB5022, MSPB5023, MSPB5034, MSPB5035, MSPB5046, MSPB5047, MSPB5058, MSPB5059 Standards .............................. : FCC CFR 47 PART 18 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ........................................... : Date (s) of performance of tests ............. : Jun. 14, 2023 ~ Jun. 25, 2023 Date of Issue .......................................... : Jun. 25, 2023 Test Result .............................................. : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 23 Report No.: HK2306142499-1E Table of Contents Page 1 . TEST SUMMARY 5 1.1 . Test Procedures And Results 5 1.2 . Information of the Test Laboratory 5 1.3 . Measurement Uncertainty 5 2. GENERAL INFORMATION 6 2.1. General Description of EUT 6 2.2. Carrier Frequency of Channels 7 2.3. Operation of EUT during testing 7 2.4. Description of Test Setup 8 2.5. Measurement Instruments List 9 3. CONDUCTED EMISSION TEST 10 3.1. Block Diagram of Test Setup 10 3.2. Conducted Power Line Emission Limit 10 3.3. Test Procedure 10 4. RADIATED EMISSIONS 13 4.1. Block Diagram of Test Setup 13 4.2. Rules and specifications 13 4.3. Test Procedure 14 5. ANTENNA REQUIREMENT 19 6. PHOTOGRAPH OF TEST 20 7. PHOTOS OF THE EUT 23 Page 4 of 23 Report No.: HK2306142499-1E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Jun. 25, 2023 Jason Zhou Page 5 of 23 Report No.: HK2306142499-1E 1. TEST SUMMARY 1.1. Test Procedures And Results DESCRIPTION OF TEST SECTION NUMBERRESULT CONDUCTED EMISSIONS TEST 18.307 COMPLIANT RADIATED EMISSION TEST 18.305 COMPLIANT Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. 1.2. Information of the Test Laboratory Shenzhen HUAK Testing Technology Co., Ltd. Add.: 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Testing Laboratory Authorization： A2LA Accreditation Code is 4781.01. FCC Designation Number is CN1229. Canada IC CAB identifier is CN0045. CNAS Registration Number is L9589. 1.3. Measurement Uncertainty Measurement Uncertainty Conducted Emission Expanded Uncertainty =2.71dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.90dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz)= 3.90dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.28dB, k=2 Page 6 of 23 Report No.: HK2306142499-1E 2. GENERAL INFORMATION 2.1. General Description of EUT Equipment: Magnetic wireless power bank Model Name: MSPB5010 Series Models: MSPB5011, MSPB5022, MSPB5023, MSPB5034, MSPB5035, MSPB5046, MSPB5047, MSPB5058, MSPB5059 Model Difference: All model’s the function, software and electric circuit are the same, only with model named different. Test sample model: MSPB5010. Trade Mark: None FCC ID: 2AR4R-MSPB5010 Antenna Type: Coil Antenna Antenna Gain: 0dBi Operation frequency: 112KHz~205KHz Test frequency: 128KHz Number of Channels: 1 Modulation Type: ASK Power Source: Type-c Input: 5V3A; 9V2A;12V/1.5A Type-c Output: 5V3A; 9V2.22A;12V/1.67 Wireless charging Output: 5W/7.5W/10W/15W Power Rating: Type-c Input: 5V3A; 9V2A;12V/1.5A Type-c Output: 5V3A; 9V2.22A;12V/1.67 Wireless charging Output: 5W/7.5W/10W/15W Page 7 of 23 Report No.: HK2306142499-1E 2.2. Carrier Frequency of Channels Operation Frequency each of channel Channel Frequency 1 128KHz 2.3. Operation of EUT during testing The equipment under test(EUT) was configured to measure its highest possible emission level. The test modes were adapted according to the operation manual for use, more detailed description as follows: Test Mode Description Remark DC mode: OUT Wireless: 15W OUT Wireless: 15W + Type-c Output: 12V/1.67 AC mode: OUT Wireless: 15W Connect to the adapter OUT Wireless: 15W + Type-c Output: 12V/1.67 Note: All modes are tested, and the report shows only the worst mode data. Page 8 of 23 Report No.: HK2306142499-1E 2.4. Description of Test Setup DC mode: Operation of EUT during testing: AC mode: Operation of EUT during testing: AC Plug Adapter information Model: GD2B9 Input: 100-240V~ 50/60Hz, 2A Max USB-C1 Output: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A, 28V 5A 140W MAX USB-C2 Output: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A 100W MAX USB-A Output: 5V 4.5A, 4.5V 5A, 5V 3A, 9V 2A, 1…

Text truncated - open the document above for the full version.

MSPB5010 Radiated Emission DC Mode: AC Mode: Conducted Emissions