2AR6OHC1000HC1 Connected Hard Hat

Guardhat HC-1 User Manual 1 USER MANUAL MODEL HC-1 V1.6 Guardhat HC-1 User Manual 2 Table of Contents Table of Figures ............................................................................................................................... 4 Introduction .................................................................................................................................... 5 CONTACT INFORMATION ................................................................................................................ 6 DISCLAIMERS ................................................................................................................................... 7 FCC .............................................................................................................................................. 7 IC ................................................................................................................................................. 8 For the USA ................................................................................................................................. 8 For Canada: ................................................................................................................................. 8 Product Specifications .................................................................................................................... 9 SAFETY ........................................................................................................................................... 10 Battery ....................................................................................................................................... 10 Fit .............................................................................................................................................. 11 WHAT’S INSIDE? ............................................................................................................................ 12 USER INTERFACE ........................................................................................................................... 13 Wearing the Hard Hat ............................................................................................................... 13 Buttons ...................................................................................................................................... 14 LED Indicators ........................................................................................................................... 15 Communication: Microphone, Speakers, & Camera ................................................................ 17 EVENTS .......................................................................................................................................... 19 Evacuation ................................................................................................................................. 20 SOS ............................................................................................................................................ 21 Fall Detection ............................................................................................................................ 22 Geofence Breach ....................................................................................................................... 23 Guardhat HC-1 User Manual 3 Network Disconnect Event ....................................................................................................... 24 Blackout Zone Event ................................................................................................................. 25 Hat Not Worn Event .................................................................................................................. 26 Elevated Noise Event ................................................................................................................ 27 Low / High Temperature Event ................................................................................................. 28 Acceleration Event .................................................................................................................... 29 Proximity Event ......................................................................................................................... 30 POWER & CONNECTIVITY ............................................................................................................. 31 Installing and Removing the Battery......................................................................................... 31 Charging the Battery ................................................................................................................. 33 Turning the Hard Hat ON and OFF ............................................................................................ 35 Hard Hat Status LED .................................................................................................................. 35 USER INTERFACE REFERENCE ........................................................................................................ 36 LED Indicators ........................................................................................................................... 36 Buttons ...................................................................................................................................... 39 Guardhat HC-1 User Manual 4 Table of Figures Figure 1: Guardhat Model HC-1 ...................................................................................................... 5 Figure 2: Hard Hat Components ................................................................................................... 12 Figure 3: Suspension Adjustment ................................................................................................. 13 Figure 4: Top Button ................................................................…

Text truncated - open the document above for the full version.

Authority to Act as Agent Date: August 19, 2019 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: Ryan Urness and Amanda Hauck of Laird Connectivity, INC are authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date: 8/19/2020 By: Basman Dahleh (Signature) (Print name) Title: VP of Engineering On behalf of: Guardhat Inc (Company Name) Telephone: 708-670-6135

Request for Confidentiality Date: September 12, 2019 Subject: Confidentiality Request for: FCC ID:2AR6OHC1000 and IC:24751-HC1000 Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit ☐ Short Term ☒ Permanent Block Diagrams ☒ Short Term External Photos ☒ Short Term ☐ Permanent * 1 Internal Photos ☐ Short Term ☒ Permanent Operation Description/Theory of Operation ☐ Short Term ☐ Permanent Parts List & Placement/BOM ☐ Short Term ☐ Permanent Tune-Up Procedure ☐ Short Term ☒ Permanent Schematics ☐ Short Term Test Setup Photos ☒ Short Term ☐ Permanent * 3 User’s Manual Guardhat Inc has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of __180 2 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Please refer to http://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. Sincerely, By: VP of Engineering Basman Dahleh (Signature/Title 3 ) (Print name) 3 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

EXTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751-HC1000 Page 1 of 6 Back View EXTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751-HC1000 Page 2 of 6 Bottom EXTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751-HC1000 Page 3 of 6 Front View EXTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751-HC1000 Page 4 of 6 Top View EXTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751-HC1000 Page 5 of 6 Left View Right View EXTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751-HC1000 Page 6 of 6

AA BB 4 4 3 3 2 2 1 1 SELECT ONE ± ± ± ± ± % x SCHEDULE RELATED ORDINARY LOCATION B PART NO. SIZE NAMEAPPV DATE MGMT Q.A. FROM 1 TO FINISH C DB A ALL DIMENSIONS ARE IN MILLIMETERS AND APPLY AFTER FINISHING OPERATIONS. UNLESS OTHERWISE SPECIFIED: MATERIAL NAMEAPPV DATE REVISION DESCRIPTION SHEET: 1 OF 1SCALE: 1:1 DRAWN ENGR PROPRIETARY AND CONFIDENTIAL THE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OF GUARDHAT INC. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF GUARDHAT INC IS PROHIBITED. WT: GRAMS Notes: Label material: Vinyl or polyester Label adhesive: LSE Ink: Suitable for outdoor use Vinyl or Polyester FCC ID Label for HC1 1.0 60 mm 30 mm Label install location

INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 1 of 18 INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 2 of 18 Carrier Board Front INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 3 of 18 Carrier Board Front with Shields Removed INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 4 of 18 Carrier Board Back INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 5 of 18 Carrier Board Back with Shield Removed INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 6 of 18 Front Top view communicator without brim INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 7 of 18 INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 8 of 18 LTE Radio INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 9 of 18 INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 10 of 18 LTE and position board antennas INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 11 of 18 NFC Antenna INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 12 of 18 Position board Antenna Connections UWB and Zigbee INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 13 of 18 Position board back side INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 14 of 18 Position board shields removed INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 15 of 18 Sensor Board Front INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 16 of 18 Sensor Board Back INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 17 of 18 SOM Module (BLE, BT, WiFi) INTERNAL PHOTOS Company Name Guardhat Inc Model # HC1 FCC ID # 2AR6OHC1000 IC # 24751‐HC1000 Page 18 of 18 WiFi, BLE, BT antenna connection and location under SOM

SPE- 15-8-079/B/CM Page 1 of 10 SPECIFICATION Part No. : FXR.08.52.0075X.A.dg Product Name : Rectangular Flexible Near-Field Communications Ferrite Antenna with 75mm Twisted Pair 28AWG Cable and ACH(F) connector Features : 13.56MHz RFID / NFC Antenna Layered with Ferrite Flux Director Low Profile Embedded Antenna Dimensions: 53.34 mm x 37.3 mm Thickness: 0.30 mm Peel and stick Nitto UTD-30 adhesive on back 75mm Twisted Pair 28AWG Cable with Teflon and ACH(F) Connector Customized solutions available RoHS Compliant SPE- 15-8-079/B/CM Page 2 of 10 1.Introduction The FXR.08.52.0075X.A.dg is an NFC Ferrite antenna with 75mm twisted pair 28AWG cable and JST connector. It works with specific NFC chips which need to connect via JST ACH connector. NFC antennas can be applied in areas not traditionally available to other types of antennas. A common example is the ability to apply NFC antennas to batteries or other conductive surfaces. To enable this usage, however, a ferrite flux director layer is required. This ferrite layer acts to steer the magnetic flux away from the metal or other conductor, where it would otherwise result in loss or complete failure to communicate. Taoglas NFC antennas can therefore be customized with flux director layers to enable this flexibility in usage. The coil inductance noted below can help estimate a capacitance value for creating resonance at 13.56MHz. Typical applications - Mobile devices - Electronic wallets - Health care ID scanners - Payment readers - Office ID - Access control - Internet Of Things Customized antennas for specific applications, shape, and impedance match can also be provided for an NRE and subject to MOQ. Contact your regional Taoglas sales office for more information and support on our NFC antenna range. SPE- 15-8-079/B/CM Page 3 of 10 2.Specification Flexible PCB Near-Field Communications Antenna Frequency 13.56 MHz Inductance @ 13.56 MHz 4.5 μH Flexible NFC Mechanical Antenna Dimensions Dimensions: 53.34 mm x 37.3 mm Thickness: 0.15 mm Cable Length 75 mm Connector Type ACH(F) Adhesive 3M 467 Weight 3g Ferrite Sheet Mechanical PET Dimension: 53.34*37.3 mm Thickness: 0.02 mm Ferrite Sheet Dimension: 53.34*37.3 mm Thickness: 0.10 mm Adhesive Type Nitto UTD-30 (W) Thickness: 0.03 mm Environmental Operation Temperature -40°C to 85°C Storage Temperature -40°C to 85°C Humidity Non-condensing 65°C 95% RH SPE- 15-8-079/B/CM Page 4 of 10 3.Antenna Application 3.1. Test setup A test fixture is used to measure the maximum interrogation distance. The FXR.08.52.0075X.A.dg antenna is connected to a NFC evaluation board and then placed on the fixed part of the fixture. The test sample is placed on a thin sheet of plastic connected to the movable part of the fixture. Then the distance is carefully adjusted until the reader can no longer read the sample, thus the maximum interrogation distance is displayed in the ruler. Evaluation Board Measuring Scale Test Fixture Measurement Arm Antenna RFID Reader Module Passively Powered Tag Sample on thin plastic sheet SPE- 15-8-079/B/CM Page 5 of 10 3.2. RFID tags used for test A total of 8 RFID tags were used to measure the interrogation distances. The next picture shows type 1 and type 2 tags, respectively. Type 1 Type 2 Type 1 tag is based on ISO/IEC 14443A standard and has 512 bytes of memory. Type 2 tag is based on ISO/IEC 14443A standard and has 192 bytes of memory. The next picture shows the Tag-it HF-I RFID tags from Texas Instruments: RI-102- 112, RI-I11-112, RI-I03-112, RI-I16-112, button type, and RI-I17-112. The Tag-it HF-I Plus Transponder Inlay family of Texas Instruments RFID is based on the ISO/IEC 15693 standard for contactless integrated circuit cards (vicinity cards) and ISO/IEC 18000-3 standard for item management. SPE- 15-8-079/B/CM Page 6 of 10 3.3. Matching The interrogation distances presented here were taken with the antenna connected directly to the evaluation boards with the default matching circuit. This is not necessarily the optimal matching circuit that could be designed for a particular antenna. We kept the default matching of each evaluation board to minimize the number of variables in testing and keep integration as simple as possible. As with any matching network the exact circuit and values for an optimal network depend on the combination of antenna, NFC circuit, any intervening transmission line and the environment presented to the antenna. These factors are specific to the particular end product. As a starting point, to achieve the read range results presented here, use the matching network detailed in the schematic of the evaluation board for your particular NFC chip and keep the antenna free of any obstruction. Once you can demonstrate successful reads you can then optimize performance as desired. If the matching network is required, you should implement the following topology: The matching circuit should be designed to match the IC impedance 푍 퐼퐶 to 100Ω and then connect the antenna through a 100Ω differential pair. SPE- 15-8-079/B/CM Page 7 of 10 3.4. Test Results A total of 8 sample devices were used to measure the interrogation distances in two scenarios, over plastic and over metal, using the Texas Instruments TRF7970AEVM evaluation board. The results are: Over plastic: Device Dimensions (mm.) Interrogation Distance (mm.) Topaz512 (Type 1) 43 x 43 12 NTAG203 (Type 2)  42 14 Tag-it HFI Plus RI-I11-112 45 x 45 21 Tag-it HFI Plus RI-I02-112 76 x 48 23 Tag-it HFI Plus RI-I03-112 38 x 22.5 10 Tag-it HFI Plus RI-I16-112  24.2 12 Button type  22 10 Tag-it HFI Plus RI-I17-112  32.5 15 Over metal: Device Dimensions (mm.) Interrogation Distance (mm.) Topaz512 (Type 1) 43 x 43 7 NTAG203 (Type 2)  42 9 Tag-it HFI Plus RI-I11-112 45 x 45 14 Tag-it HFI Plus RI-I02-112 76 x 48 16 Tag-it HFI Plus RI-I03-112 38 x 22.5 7 Tag-it HFI Plus RI-I16-112  24.2 9 Button type  22 8 Tag-it HFI Plus RI-I17-112  32.5 11 SPE- 15-8-079/B/CM Page 8 of 10 4.Mechanical Drawing (Unit: mm) SPE- 15-8-07…

Text truncated - open the document above for the full version.

© 2019 RF Exposure Lab, LLC This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. 802 N. Twin Oaks Valley Road, Suite 105 • San Marcos, CA 92069 • U.S.A. TEL (760) 471-2100 • FAX (760) 471-2121 http://www.rfexposurelab.com CERTIFICATE OF COMPLIANCE SAR EVALUATION Guardhat Dates of Test: October 12-15, 2019 1520 Woodward Avenue, 3 rd Floor Test Report Number: SAR.20191013 Detroit, MI 48226 Revision B This wireless mobile and/or portable device has been shown to be compliant for localized specific absorption rate (SAR) for uncontrolled environment/general exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and IEC 62209-2:2010 (See test report). I attest to the accuracy of the data. All measurements were performed by myself or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. RF Exposure Lab, LLC certifies that no party to this application is subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Jay M. Moulton Vice President Certificate # 2387.01 FCC ID: 2AR6OHC1000 Contains FCC IDs: 2AR6OHP2470, N7NHL7588, 2AFDI-ITCOQ626S Model(s): HC1 Test Sample: Engineering Unit Same as Production Serial Number: Eng 1 Equipment Type: Wireless Hard Hat Classification: Portable Transmitter Next to Head TX Frequency Range: 704 – 716 MHz, 777 – 787 MHz, 814 – 849 MHz; 1710 – 1755 MHz, 1850 – 1915 MHz, 2412 – 2462 MHz, 5150 – 5350 MHz, 5500 – 5700 MHz, 5745 – 5825 MHz, 2402 – 2480 MHz, 3993 MHz, 6489 MHz Frequency Tolerance: ± 2.5 ppm Maximum RF Output: 750 MHz (LTE) – 25.0 dBm, 850 MHz (WCDMA) – 25.0 dBm, 850 MHz (LTE) – 25.0 dBm, 1750 MHz (LTE) – 25.0 dBm, 1900 MHz (WCDMA) – 25.0 dBm, 1900 MHz (LTE) – 25.0 dBm, 2450 MHz (b) – 21.0 dBm, 2450 MHz (g) – 21.0 dBm, 2450 MHz (n) – 21.0 dBm, 5250 MHz (a) – 20.1 dBm, 5250 MHz (n) – 20.1 dBm, 5600 MHz (a) – 20.1 dBm, 5600 MHz (n) – 20.1 dBm, 5800 MHz (a) – 20.1 dBm, 5800 MHz (n) – 20.1 dBm, 2450 MHz (BT) – 15.5 dBm, 2450 MHz (Zigbee) – 10 dBm, 3993 MHz (UWB) – -19.5 dBm, 6489 MHz (UWB) – -19.5 dBm Conducted Signal Modulation: WCDMA, QPSK, 16QAM, DSSS, OFDM, GFSK, OQPSK Antenna Type: Internal Application Type: Certification FCC Rule Parts: Part 2, 15C, 15E, 22, 24, 27 KDB Test Methodology: KDB 447498 D01 v06, KDB 248227 v02r02, KDB 616217 D04 v01r02, KDB 941225 D01 v03r01 & D05 v02r05 Max. Stand Alone SAR Value: 0.37 W/kg Reported Max. Simultaneous SAR Value: 0.80 W/kg Reported Separation Distance: 0 mm Report Number: SAR.20191013 © 2019 RF Exposure Lab, LLC Page 2 of 119 This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. Table of Contents 1. Introduction ................................................................................................................................... 4 SAR Definition [5] .............................................................................................................................. 5 2. SAR Measurement Setup .............................................................................................................. 6 Robotic System ................................................................................................................................. 6 System Hardware .............................................................................................................................. 6 System Electronics ............................................................................................................................ 7 Probe Measurement System ............................................................................................................. 7 3. Probe and Dipole Calibration ....................................................................................................... 14 4. Phantom & Simulating Tissue Specifications ............................................................................... 15 Head & Body Simulating Mixture Characterization .......................................................................... 15 5. ANSI/IEEE C95.1 – 1992 RF Exposure Limits [2] ........................................................................ 16 Uncontrolled Environment ............................................................................................................... 16 Controlled Environment ................................................................................................................... 16 6. Measurement Uncertainty............................................................................................................ 17 7. System Validation ........................................................................................................................ 18 Tissue Verification ........................................................................................................................... 18 Test System Verification .................................................................................................................. 18 8. SAR Test Data Summary ............................................................................................................ 19 Procedures Used To Establish Test Signal ..................................................................................... 19 Device Test Condition ..................................................................................................................... 19 9. LTE Document Checklist ............................................................................................................. 20 10. FCC 3G Measurement Procedures .............................................................…

Text truncated - open the document above for the full version.

A Company: Guardhat Page 1 of 23 Name: HC1 Report: 319122 B Model: HC1 Job: C‐3227 Serial: P240 Test Report # 319122 B Equipment Under Test: HC1 Test Date(s): 8/29/19 Prepared for: ATTN: Basman Dahleh Guardhat 1520 Woodward Ave 3rd floor Detroit, MI 48226 Report Issued by: Khairul Aidi Zainal, Laboratory Manager Signature: Date:12/13/2019 Report Reviewed by: Adam Alger, Quality Manager Signature: Date:12/13/2019 Report Constructed by: Shane Dock, EMC Engineer Signature: Date: 8/29/2019 This test report may not be reproduced, except in full, without written approval of Laird Technologies, Inc. Company: Guardhat Page 2 of 23 Name: HC1 Report: 319122 B Model: HC1 Job: C‐3227 Serial: P240 CONTENTS Contents ........................................................................................................................................................ 2 Laird Technologies Test Services in Review .............................................................................................. 3 1 Test Report Summary ........................................................................................................................... 4 2 Client Information ................................................................................................................................. 5 2.1 Equipment Under Test (EUT) Information .................................................................................... 5 2.2 Modifications Incorporated for Compliance ................................................................................. 5 2.3 Deviations and Exclusions from Test Specifications ..................................................................... 5 2.4 Additional Information .................................................................................................................. 5 3 References .......................................................................................................................................... 10 4 Uncertainty Summary ......................................................................................................................... 11 5 Test Data ............................................................................................................................................. 12 5.1 Fundamental Emission ................................................................................................................ 12 5.2 Other Radio Information ............................................................................................................. 15 6 Exclusion Calculation........................................................................................................................... 16 6.1 FCC .............................................................................................................................................. 16 6.2 Industry Canada (ISED) ................................................................................................................ 21 7 Revision History .................................................................................................................................. 23 Company: Guardhat Page 3 of 23 Name: HC1 Report: 319122 B Model: HC1 Job: C‐3227 Serial: P240 Laird Technologies Test Services in Review The Laird Technologies, Inc. laboratory located at W66 N220 Commerce Court Cedarburg, Wisconsin, 53012 USA is recognized through the following organizations: A2LA – American Association for Laboratory Accreditation Accreditation based on ISO/IEC 17025: 2005 with Electrical (EMC) Scope A2LA Certificate Number: 1255.01 Scope of accreditation includes all test methods listed herein, unless otherwise noted. Federal Communications Commission (FCC) – USA Accredited recognition of two 3 meter Semi‐Anechoic Chambers Accredited Test Firm Registration Number: 953492 Innovation, Science and Economic Development Canada ISED Site listing of two 3 meter Semi‐Anechoic Chambers based on RSS‐GEN – Issue 4 File Number: IC 3088A‐2 File Number: IC 3088A‐3 Company: Guardhat Page 4 of 23 Name: HC1 Report: 319122 B Model: HC1 Job: C‐3227 Serial: P240 1 TES…

Text truncated - open the document above for the full version.