2AR82-SKIWB822CU8IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.0

GuangzhouShikunElectronicsCo.,Ltd 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Yourssincerely  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Company name: Guangzhou Shikun Electronics Co., Ltd Address: NO.6 Liankun Road, Huangpu District, Guangzhou, China Product Name: IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.0 Model(s): SKI.WB822CU.8 2.911(d)(5)(i) Equipment Type We, [ Guangzhou Shikun Electronics Co., Ltd ] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: , TitleandCompanyname:CertificationManager/GuangzhouShikunElectronicsCo.,Lt Date: 202Name:4-7-1 d NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

GuangzhouShikunElectronicsCo.,Ltd 2.911(d)(5)(ii)ApplicantAttestationv1.2 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Yourssincerely Company name: Guangzhou Shikun Electronics Co., Ltd Address: NO.6 Liankun Road, Huangpu District, Guangzhou, China Product Name: IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.0 FCC ID: 2AR82-SKIWB822CU8 Model(s): SKI.WB822CU.8 2.911(d)(5)(ii) Applicant filing We, [Guangzhou Shikun Electronics Co., Ltd ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. , TitleandCompanyname:CertificationManager/GuangzhouShikunElectronicsCo.,Lt Date: 202Name:4-7-1 d NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Guangzhou Shikun Electronics Co., Ltd IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.0 Guangzhou, China, 510700 China Date: August 30, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:2AR82-SKIWB822CU8 Grantee's FRN: 0028116184 US Agent – Attestation Statement / Part 2.911(d)(7) [Guangzhou Shikun Electronics Co., Ltd] certifies, that as of August 30, 2023, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID:2AR82- SKIWB822CU8. [Guangzhou Shikun Electronics Co., Ltd], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [Guangzhou Shikun Electronics Co., Ltd] for FCC ID:2AR82-SKIWB822CU8 Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: Guangzhou Shikun Electronics Co., Ltd Designated Agent: FCC US Agent, LLC Company Representative: Bing Yi Designated Agent Representative: Tim Payne Signature: Signature:

GuangzhouShikunElectronicsCo.,Ltd WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown Product Description:IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4 Agent Authorization Company:Guangzhou Shikun Electronics Co., Ltd Address:NO.6 Liankun Road, Huangpu District, Guangzhou, China Product Name:IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4 .2/5.0 Model Number(s):SKI.WB822CU.8 .2/5.0 . BingYi Date:2024-7-1 CertificationManage Signature: Name: Title:r Company:GuangzhouShikunElectronicsCo.,Ltd

GuangzhouShikunElectronicsCo.,Ltd FCCModularApprovalRequestRev3.0 FederalCommunicationsCommission EquipmentAuthorizationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date: Subject;ModularTransmitterApplication Companyname:GuangzhouShikunElectronicsCo.,Ltd FCCID:2AR82-SKIWB822CU8 DearSir/Madam, ThisletterincludestheFCCapplicationrequirementsforModularTransmitterApprovalRequest for;- FCCKDB996369D01‘ModuleCertificationGuidev02;and FCCKDB996369D03OEMManualv01 Inaccordancewith47CFR15.212ModularTransmittersandKDB996369D01‘ModuleEquip AuthGuidev02’.FCCID2AR82-SKIWB822CU8hasbeenexaminedagainstthefollowing requirements. Requirementper15.212andKDB996369D01ExplanationfromGrantee (donotwriteyes/no,butexplainwhyproduct complies/howitisachieved) Theradioelementsmusthavetheradiofrequencycircuitry shielded.Physicalcomponentsandtuningcapacitor(s)maybe locatedexternaltotheshield,butmustbeonthemodule assembly. Yes.Thereisaweldedshieldingcaseonthe module. Themodulemusthavebufferedmodulation/datainputstoensure thatthedevicewillcomplywithPart15requirementswithanytype ofinputsignal. Yes.Themodulehavebuffered modulation/datainputs. Themodulemustcontainpowersupplyregulationonthemodule.Yes,Theinputvoltageis3.3V±0.3 Themodulemustcontainapermanentlyattachedantenna,or containauniqueantennaconnector,andbemarketedand operatedonlywithspecificantenna(s),per§§15.203,15.204(b), 15.204(c),15.212(a),2.929(b). Yes.TheWiFiiswithFPCantenna,andthe bluetoothiswithipexconnectedtoshrapnel antenna. Themodulemustdemonstratecomplianceinastand-alone configuration. Yes.Themoduleisincomplianceinastand- aloneconfiguration. ThemodulemustbelabeledwithitspermanentlyaffixedFCCID label,oruseanelectronicdisplay(seeKDBPublication784748). Yes.ThelablehasanFCCIDandis permanentlyattachedtothemodule Themodulemustcomplywithallspecificrulesapplicabletothe transmitter,includingalltheconditionsprovidedintheintegration instructionsbythegrantee. Yes.ThemodulepassesalltestsofPart15C andPart15E. ThemodulemustcomplywithRFexposurerequirementsYes,refertoJCF240627041-005FCCMPE. GuangzhouShikunElectronicsCo.,Ltd FCCModularApprovalRequestRev3.0 IntegrationInstructionsforhostproductmanufacturers ThefollowingitemsaresubmittedinsupportofapplicationforModularTransmitterFCCIDas notedaboveasrequiredbytheFCCKDB996369D03OEMManualv01. Theseitemsareprovidedasintegrationinstructionsforhostproductmanufacturers(e.g.,OEM instructionmanual)tousewhenintegratingamoduleinahostproduct. AnyrequirementsthatarenotapplicabletotheModuleareasindicatedbelow. SummaryofrequirementsandChecklist.RefertotheKDBfordescriptionofthecompleterequirements; KDB RefSect RequirementsofKDB996369D03UserManualPageNumber reference 2.2ListofapplicableFCCrulesP23 2.3SummarizethespecificoperationaluseconditionsP23 2.4SinglemoduleproceduresP24 2.5TraceantennadesignsP24 2.6RFexposureconsiderationsP24 2.7AntennasP28 2.8LabelandcomplianceinformationP24 2.9Informationontestmodesandadditionaltesting requirements P24 2.10Additionaltesting,Part15SubpartBdisclaimerP24-P25 Name:BingYiDate:2024-7-25 Title:CertificationManager Signatureofapplicant

GuangzhouShikunElectronicsCo.,Ltd OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date: 2024-7-1 Subject; Request for Confidentiality FCC ID: 2AR82-SKIWB822CU8 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name:Bing Yi Title: Certification Manager

Label Label location

Report No.: JCF240627041-005 LOP-FTR011 1.0 1 / 8 RF EXPOSURE REPORT Applicant:Guangzhou Shikun Electronics Co., Ltd Address:NO.6 Liankun Road, Huangpu District, Guangzhou, China Manufacturer:Guangzhou Shikun Electronics Co., Ltd Address:NO.6 Liankun Road, Huangpu District, Guangzhou, China Product Description: IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.0 Brand Name:NA Tested Model:SKI.WB822CU.8 FCC ID:2AR82-SKIWB822CU8 Report No.:JCF240627041-005 Received Date:Jun. 27, 2024 Tested Date:Jun. 27, 2024 ~Jul. 18, 2024 Issued Date:Jul. 18, 2024 Test Standards:KDB 447498 D01 General RF Exposure Guidance v06 Test Result:Pass Prepared By: Roger Li/Engineer Date:Jul. 18, 2024 Reviewed By: Kenny Zhang/EngineerDate:Jul. 18, 2024 Approved By: Talent Zhang/Engineer Date:Jul. 18, 2024 Note: The test results in this report apply exclusively to the tested model / sample. Without written approval of Guangzhou Jingce Testing Technology Co., Ltd. the test report shall not be reproduced except in full. Report No.: JCF240627041-005 LOP-FTR011 1.0 2 / 8 Report Revise Record Report VersionRevise TimeIssued DateValid VersionNotes V1.0/Jul. 18, 2024Original Report/ Report No.: JCF240627041-005 LOP-FTR011 1.0 3 / 8 Table of Contents 1. Test Report Declare.............................................................................................................................4 2. Equipment Under Test.........................................................................................................................5 2.1. Description of EUT........................................................................................................................... 5 2.2. Description of Available Antennas................................................................................................... 5 3. Test Laboratory....................................................................................................................................6 4. RF Exposure Measurement................................................................................................................ 7 4.1. Limits for Maximum Permissible Exposure (MPE)...........................................................................7 4.2. MPE Calculation Formula.................................................................................................................7 4.3. Classification.................................................................................................................................... 7 4.4. Conducted Power.............................................................................................................................7 5. RF Exposure Calculation.................................................................................................................... 8 Report No.: JCF240627041-005 LOP-FTR011 1.0 4 / 8 1. Test Report Declare Applicant: Guangzhou Shikun Electronics Co., Ltd Address: NO.6 Liankun Road, Huangpu District, Guangzhou, China Manufacturer: Guangzhou Shikun Electronics Co., Ltd Address: NO.6 Liankun Road, Huangpu District, Guangzhou, China Product Name IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.0 Brand Name: NA Model Name: SKI.WB822CU.8 Difference Description: NA We Declare: The equipment described above is tested by Guangzhou JingceTesting Technology Co., Ltd. and in the configuration tested the equipment complied with the standards specified above. The test results are contained in this test report and Guangzhou Jingce Testing Technology Co., Ltd. is assumed of full responsibility for the accuracy and completeness of these tests except as provided information by clients. Report No.: JCF240627041-005 LOP-FTR011 1.0 5 / 8 2. Equipment Under Test 2.1.Description ofEUT EUT* Name: IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.0 Model Number:SKI.WB822CU.8 EUT Function Description:Please refer to user manual of this device Power Supply:DC 3.3V±0.3 Radio Specification: Bluetooth V5.0, IEEE 802.11a/b/g/n/ac Operation Frequency: Bluetooth: 2402MHz-2480MHz IEEE802.11b/g/n/a/ac: 2412MHz-2462MHz, 5180MHz-5825MHz Modulation: Bluetooth: GFSK,  /4-DQPSK, 8DPSK IEEE 802.11b: DSSS (CCK, QPSK, BPSK) IEEE 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11n HT20, HT40: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11a: OFDM (64QAM, 16QAM, QPSK, BPSK) IEEE 802.11ac (HT20/40/80): OFDM (256QAM, 64QAM, 16QAM, QPSK, BPSK) Data Rate: Bluetooth: 1Mbps, 2Mbps, 3Mbps IEEE 802.11b: 1, 2, 5.5, 11 Mbps IEEE 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps IEEE 802.11n HT20: 14.4, 28.9, 43.3, 57.8, 86.7, 115.6, 130.0, 144.4Mbps IEEE 802.11n HT40: 30.0, 60.0, 90.0, 120.0, 180.0, 240.0, 270.0, 300.0 Mbps IEEE 802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps IEEE 802.11ac HT20: 14.4, 28.9, 43.3, 57.8, 86.7, 115.6, 130, 144.4, 173.3 Mbps IEEE 802.11ac HT40: 30, 60, 90, 120, 180, 240, 270, 300, 360, 400 Mbps IEEE 802.11ac HT80: 65, 130, 195, 260, 390, 520, 585, 650, 780, 866.7 Mbps Antenna Type: Bluetooth: FPC Antenna, 5.85 dBi 2.4G WIFI: Shrapnel Antenna, 4.13 dBi 5G WIFI: Shrapnel Antenna, 4.56 dBi Product Type: Portable deviceMobile deviceFixed device Note 1: EUT is the ab. of equipment under test. Note 2: The antenna gain is declared by the customer and the laboratory is not responsible for the accuracy of the antenna gain. 2.2.Description of Available Antennas Test Mode Transmit and Receive Mode Description BT&BLE1TX, 1RXANT 1 can be used as transmitting/receiving antenna. 2.4G WIFI2TX, 2RX ANT 1 and ANT2 can be used as transmitting/receiving antenna. 5G WIFI2TX, 2RX ANT 1 and ANT2 can be used as transmitting/receiving antenna. Report No.: JCF240627041-005 LOP-FTR011 1.0 6 / 8 3. Test Laboratory Guangzhou Jingce Testing Technology Co., Ltd. Add.: No.10, Hefeng No.1 street, Huangpu District, Guangzhou, Guangdong, People’s Republic of China Association for Laboratory Accreditation(A2LA). Certificate Number: 6594.03 FCC Designati…

Text truncated - open the document above for the full version.

第1页共37页 承认书 客户：合肥京东方视讯科技有限公司 品名：WIFI-1天线组件 料号：61005-00398 型号： 机种：VIZIOD43 日期：2022-04-13 供应商签核 SUPPLIERAPPROVEDSIGNATURES 担当 PREPAREDby 审查 CHECKEDby 核准 APPROVEDby 赖宁平农林娟邹国华 供应商名称： 深圳市中天迅通信技术股份有限公司 供应商地址： 深圳市宝安区石岩镇石龙大道 34 号 ( 腾达工业园 ) 供应商电话：0755-27588320 供应商传真：0755-27588045 ANTCable_接收线___210mm（灰）_/_散装料_VIZIOD43_ 中天迅_SKD 第2页共37页 规格变更履历表 版本 变更 日期 变更原因变更内容ECN编号负责人核准人 A12021-12-24 首版 NANA 邹一麟农林娟 A22022-04-13 客户指定纸箱规 格 更新包装信息表 2022-04-120 01 赖宁平邹国华 注：MP机种任何设计变更需提供ECN编码 第3页共37页 产品环保要求： 请在方框内打勾确认 是  否  无卤HF(Br<900ppm,Cl<900ppm,Br+Cl<1500ppm) 第4页共37页 SPECIFICATION SPECIFICATION SHEETFORAPPROVAL （ Revision ： R ： A2 ） CUSTOMER( 客户名称 ) 合肥京东方视讯科技有限公司 CSP/N(客户机种)VIZIOD43AGATF02 PARTNAME(品名)WIFI-1天线组件 FREQUENCY( 频率 ) 2.4~2.5GHz+5.15~5.85GHz ZTXNO.( 物料编号 ) 2.00005357 DATE( 日期 ) 2022-04-13 CUSTOMER QA CHECKED ME CHECKED RF CHECKED MANAGER CHECKED ZHONGTIANXUNTECHNOLOGYCO.,LTD MANAGER CHECKED MANAGER CHECKED ME CHECKED RF CHECKED LISTER 赖宁平农林娟 地址：深圳市宝安区石岩镇石龙大道34号(腾达工业园)邮编：518000 电话：0755-27588320传真：0755-27588045http:// www.chinaztx.com Remark(备注)： Sign(客户确认签字盖章)： ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第5页共37页 Index 承认书封页 1 规格变更履历表 2 产品环保要求 3 项目信息表 4 lndex 5 1MechanicalSpecification 6 1-1 MechanicalSpecification（WIFI-1天线组件） 6 2 ReliabilityTestReport 7~11 3Testequipment 12 4Antennatestdata 13 4-1VSWR 13 4-2No-sourcetestdata 13 4-3 Directionaldrawingofhorizontalplaneof&3D radiationdrawing 14~15 4-4 产品实物图 15 5 产品成分表 16 6 RoHS 限用物质成分表 16 7 REACH 声明 17 8 符合性声明 18 9 Wirespecification 19 10 RFCONNECTORProductSpecification 20~34 11Shippinginspectionreferencebook 35 12EnvironmentCharacteristic 36 13Thepackingway 37 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第6页共37页 1.MechanicalSpecification 1-1MechanicalConfiguration（WIFI-1天线组件） ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第7页共37页 2.ReliabilityTestReport ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第8页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第9页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第10页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第11页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第12页共37页 3.Testequipment ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第13页共37页 4.Antennatestdata 4-1VSWR 4-2No-sourcetestdata ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第14页共37页 4-3Directionaldrawingofhorizontalplaneof&3Dradiationdrawing ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第15页共37页 4-4产品实物图 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第16页共37页 5.产品成分表 物料名称型号规格客户料号物料名称厂商备注 WIFI-1天线组件VIZIOD43 61005-00398 FPCDINGSHENG符合ROHS2.0 1.13双锡线KAIBO符合ROHS2.0 RF一代端子CM符合ROHS2.0 固定泡棉/#513JINHUI符合ROHS2.0 6.RoHS限用物质成分表 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第17页共37页 7.REACH声明 8.符合性声明 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第18页共37页 9. Wirespecification ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第19页共37页 10.RFCONNECTORProductSpecification ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第20页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第21页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第22页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第23页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第24页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第25页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第26页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第27页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第28页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第29页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第30页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第31页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第32页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第33页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第34页共37页 ANTENNASPECIFICATION CUSP/N:VIZIOD43WIFI-1 天线组件 ApplicationDate:APR,13,2022Rev:R:A2 ZTXP/N:VIZIOD43WIFI-1 天线组件 Editor: 第35页共37页 11.Shippingin…

Text truncated - open the document above for the full version.

Report No.:JCF240627041-001 LOP-FTR017 1.01 / 76 FCC AND ISED CERTIFICATION TEST REPORT Applicant:Guangzhou Shikun Electronics Co., Ltd Address:NO.6 Liankun Road, Huangpu District, Guangzhou, China Manufacturer:Guangzhou Shikun Electronics Co., Ltd Address:NO.6 Liankun Road, Huangpu District, Guangzhou, China Product Description: IEEE 802.11b/g/n/a/ac 2T2R USB WiFi Module Integrated BT 2.1+EDR/4.2/5.0 Brand Name:NA Tested Model:SKI.WB822CU.8 FCC ID:2AR82-SKIWB822CU8 IC:24728-SKIWB822CU8 Report No.:JCF240627041-001 Received Date:Jun. 27, 2024 Tested Date:Jun. 27, 2024 ~ Jul. 18, 2024 Issued Date:Jul. 18, 2024 Test Standards: FCC Rules and Regulations Part 15 Subpart C, RSS-247 Issue 3 August 2023 Test Procedure:ANSI C63.10:2013, RSS-Gen Issue 5 A2, Feb. 2021 Test Result:Pass Prepared By: Roger Li/EngineerDate:Jul. 18, 2024 Reviewed By: Kennys Zhang/Engineer Date:Jul. 18, 2024 Approved By: Talent Zhang/EngineerDate:Jul. 18, 2024 Note: The test results in this report apply exclusively to the tested model / sample. Without written approval of Guangzhou Jingce Testing Technology Co., Ltd. the test report shall not be reproduced except in full. Report No.:JCF240627041-001 LOP-FTR017 1.0 2 / 76 Report Revise Record Report VersionRevise TimeIssued DateValid VersionNotes V1.0/Jul. 18, 2024Original Report/ Report No.: JCF240627041-001 LOP-FTR017 1.0 3 / 76 Table of Contents 1. Test Report Declare...............................................................................................................................5 2. Summary of Test Results.....................................................................................................................6 3. Test Laboratory..................................................................................................................................... 6 4. Equipment Under Test..........................................................................................................................7 4.1. Description of EUT........................................................................................................................... 7 4.2. Channel List......................................................................................................................................7 4.3. Packet Type Configuration...............................................................................................................8 4.4. Test Channel Configuration..............................................................................................................8 4.5. Test environment conditions............................................................................................................ 8 4.6. The Worse Case Power Setting Parameter.....................................................................................8 4.7. Description of Available Antennas................................................................................................... 9 5. Description of Test Setup.....................................................................................................................9 5.1. Accessory.........................................................................................................................................9 5.2. Support Equipment...........................................................................................................................9 5.3. Test Setup........................................................................................................................................ 9 5.4. Setup Diagram for Tests.................................................................................................................. 9 6. Measurement Uncertainty.................................................................................................................. 10 7. Measuring Instrument and Software Used.......................................................................................10 8. On Time and Duty Cycle.....................................................................................................................12 8.1. Block diagram of test setup............................................................................................................12 8.2. Limits.............................................................................................................................................. 12 8.3. Results............................................................................................................................................12 8.4. Original test data............................................................................................................................ 13 9. 20 dB Occupied Bandwidth and 99 % Occupied Bandwidth..........................................................16 9.1. Block diagram of test setup............................................................................................................16 9.2. Limit................................................................................................................................................16 9.3. Test Procedure...............................................................................................................................16 9.4. Results............................................................................................................................................16 9.5. Original test data............................................................................................................................ 17 10. Conducted Output Power.................................................................................................................24 10.1. Block diagram of test setup..........................................................................................................24 10.2. Limits............................................................................…

Text truncated - open the document above for the full version.