2ARTX-LEX401Mobile Phone

I User Manual Lava Z34 II Content 1. Phone layout ............................................................................ 1 1.1. Key and Parts ................................................................... 1 2. Getting started ......................................................................... 2 2.1. Inserting the SIM & SD card ............................................ 2 3. Safety Information and Notice ................................................ 3 3.1. For Your Safety ................................................................ 3 4. Copyrights ............................................................................... 6 5. LAVA support and contact information ................................. 7 6. LAVA WARRANTY CERITIFICATE.................................... 7 1 ©2020. All rights are reserved. No part of this document can be reproduced without permission. While all efforts have been made to ensure the accuracy of all the contents in this manual, we assume no liability for errors or omissions or statements of any kind in this manual, whether such errors or omissions or statements resulting from negligence, accidents, or any other cause. The contents of this manual are subject to change without notice. Protect our environment! We strive to produce products in compliance with global environmental standards. Please consult your local authorities for proper disposal. Note: User Manual is just to guide the users about the functionality of the phone. It is not a certificate of technology. Some functions may vary due to modifications and upgrades of software, or due to print mistake. 1. Phone layout 1.1. Key and Parts 2 Label Key Label Key 1 Screen 8 Speaker 2 Receiver 9 Volume Key 3 Front Camera 10 Power Key/Lock Key 4 L/P Sensor 11 Rear Primary Camera 5 Earphone slot 12 Rear Secondary Camera 6 Mic 13 Rear Flash 7 USB Charging slot 14 Fingerprint Sensor 2. Getting started Please read the safety instructions in the "Safety Information and Notices" section before use. 2.1. Inserting the SIM & SD card ⚫ Use the SIM ejector tool to push into the SIM Eject slot till the SIM tray pops out. ⚫ Gently pull the SIM tray out ⚫ Place SIM card and SD card on the respective slots ⚫ Hold the SIM tray upright and push it back into the space till you hear it click inside. 3 3. Safety Information and Notice 3.1. For your safety  Switch off the phone in hospitals and aircraft. Obey any restrictions. Wireless devices can affect medical treatment and cause interference in aircraft.  Some medical devices such as hearing aids and pacemakers may be sensitive to external radio frequency emissions. Consult the device manufacturers or your doctor before using the phone around the medical devices.  Pay special attention to the ring tone volume and vibration settings if you have a heart problem.  In areas with a potentially explosive atmosphere, such as gas stations, fuel or chemical transfer or storage facilities, obey all signs and instructions.  Your phone will emit radio frequency even in standby mode. Turn off your phone when instructed.  Always obey all the local laws and regulations. Do not use your phone while driving. Use Hands-free operation, if available, and give full attention to driving and to the road. Pull off the road before making or answering a call if you are driving. 4  If your phone is lost or stolen, notify your service provider immediately to stop the SIM card from being used.  To prevent your phone from being misused, lock your SIM card or phone, and change passwords when necessary.  When you leave your vehicle, take the phone with you, or place it in the glove compartment to avoid theft.  Keep the phone or charger out of reach of children. Notes on phone usage  Your phone will give off electromagnetic waves. Do not place it near storage medium such as floppy disk.  Using the phone near television, land phone, radio and office automatic devices may cause interference and affect the function of the mobile phone.  Keep the phone dry; all kinds of liquid can erode electronic circuit.  Keep the phone away from extreme temperatures.  Keep the phone away from fire or a lighted cigarette.  Do not paint the phone.  Do not drop the phone or violently crush or shake the phone.  Do not keep the phone near magnets and other objects with magnetism. The phone’s magnetism may clear the information stored on floppy disk, pre-paid phone card and credit card.  Keep the phone away from hot places where the temperature may exceed 60C, such as dashboard, windowsill, or areas exposed to direct sunlight.  Do not disassemble or modify your phone. This can damage the phone, cause leakage, and break the internal circuit.  Use only damp cloth or non-static cloth to clean your phone.  Do not use alcohol, thinner, benzene or other chemicals or abrasive cleaner to clean your phone.  The phone will become warm under normal use and while charging.  Do not leave the phone with the battery empty for a long period of time. This may cause data loss.  The metal parts of the phone may irritate your skin depending on your health condition.  Do not put the phone in your back pocket. Sitting on it may damage the phone. Do not put the phone at the bottom of the bag. You may crush it.  When the vibrate mode is on, place the phone carefully to prevent it from being dropped from a height or being moved to a heat source due to the vibrating.  Do not press the touch screen with needles, pen point or other sharp objects; it can damage the display and violate the terms and conditions of the warranty. 5 Notes on battery usage  Keep metal objects (such as coins or key rings) away from the battery to avoid short circuit.  Do not remove the battery without turning off the phone.  Do not hold the battery in your mouth. The liquid of the battery can be toxic.  Embedded batteries shall be replaced by authorized dealers. Use only batteries approved by the phone manufacturer; otherwise, it…

Text truncated - open the document above for the full version.

FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. Specific Absorption Rate (SAR) information SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Before a new model phone is a available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the FCC, tests for each phone are performed in positions and locations as required by the FCC. For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 10mm from the body. Non-compliance with the above restrictions may result in violation of RF exposure guidelines.

U.S. AGENT LETTER OF ATTESTATION Date: 2024-01-02 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2ARTX-LEX401 LAVA International Limited certifies that, as of the date of the filing of the application, Iconsigh Inc. is our designated U.S. agent for service of process for the above referenced FCC ID. LAVA International Limited accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Iconsigh Inc. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Iconsigh Inc. Address: 2310 Homestead Road, Suite C1, Los Altos, CA, 94024, USA FRN: 0033398652 Tel.: +1 (408) 320-9867 Email: [email protected] Signed by (printed name): Benjamin Kaur Signature: A pplicant: LAVA International Limited Address: A-56, Sector-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India FRN: 0028011757 Tel: +91-9654481080 Email: [email protected] Signed by (printed name): Laxit Sharma S ignature:

LAVA International Limited Address: A-56, Sector-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India Email: [email protected] Tel: +91-9654481080 Fax: +0120-4637240 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-01-02 FCC ID: 2ARTX-LEX401 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing LAVA International Limited certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing LAVA International Limited certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Applicant: LAVA International Limited Address: A-56, Sector-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India Contact Person: Laxit Sharma, Asst. Manager-Product Compliance Tel.: +91-9654481080 Email: [email protected] Sincerely, Signature:

LAVA International Limited Address: A-56, Sector-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India Email: [email protected] Tel: +91-9654481080 Fax: +0120-4637240 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-01-02 Subject; Request for Confidentiality FCC ID: 2ARTX-LEX401 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Laxit Sharma Title: Asst. Manager-Product Compliance

LAVA International Limited Address: A-56, Sector-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India Email: [email protected] Tel: +91-9654481080 Fax: +0120-4637240 Date：2024-01-02 Product Model Number: LEX401, Z34 FCC ID：2ARTX-LEX401 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize China Certification ICT Co., Ltd (Dongguan)(address: No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China) to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that China Certification ICT Co., Ltd (Dongguan) is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Laxit Sharma Title: Asst. Manager-Product Compliance Email: [email protected] Telephone: +91-9654481080 On behalf of: LAVA International Limited

LAVA International Limited Address: A-56, Sector-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India Email: [email protected] Tel: +91-9654481080 Fax: +0120-4637240 Date: 2024-01-02 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern: Our product Mobile Phone, model: Z34, LEX401， FCC ID: 2ARTX-LEX401, for marketing purpose, this product only supports BT(GFSK, π/4-DQPSK, 8DPSK), BLE 1M&2M, GSM 850, PCS 1900, LTE band 5/40/41, 2.4G Wi-Fi(802.11b/g/n20 modes: 2412-2472MHz, 802.11n40 modes: 2422-2462 MHz), 5G Wi-Fi(5180-5240MHz， 5260-5320MHz，5500-5720MHz, 802.11a/n20/n40/ac20/ ac40/ ac80 modes). The other functions, bands and modes was disabled to use by manufacturer in the software and band patch, the end user has no capability to activate it. Sincerely Yours, Signature: Laxit Sharma Asst. Manager-Product Compliance

LAVA International Limited Address: A-56, Sector-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India Email: [email protected] Tel: +91-9654481080 Fax: +0120-4637240 Product Difference Declaration 2024-01-02 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Dear Sir/Madam, We, LAVA International Limited, declare that our product Mobile Phone , the models Z34, LEX401 ( FCC ID: 2ARTX-LEX401), all the models are the same electromagnetic emissions and electromagnetic compatibility characteristics. The difference only lies in the model name. We confirm that all information above is true, and we will be responsible for all the consequences. Please contact me if you have any question. Sincerely, Signature, Laxit Sharma Asst.Manager-Product Compliance

SUNNYWAY TECHNOLOGY(CHINA) sunnyway Technology （china） Co., LTD. Customer Name Sprocomm Technologies Co.,Ltd. project name E6525LV manufacturer SUNNYWAY TECHNOLOGY(CHINA) Building B, Building 3, No.99, Lane 215, Gaoguang oad, Qingpu District, Shanghai, China Antenna development sun wen long Antenna type FPC Photo Antenna matching Model: E6538LV2 antenna E1 N/A E2 0Ω E3 N/A E4 0Ω E5 N/A Antenna gain Frequency Range Antenna Gain 2.4~2.5GHz 1.44 dBi 5150-5850 MHz -0.75 dBi VSWR： 2G Wi-Fi/BT/ 5G Wi-Fi /BLE -0.75 -3.64 -6.53 -9.42

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-EXP Page 1 of 5 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-EXP Page 2 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-EXP Page 3 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-EXP Page 4 of 5 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-EXP Page 5 of 5

Label Label Location Information

China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 1 of 12 EUT INTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 2 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 3 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 4 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 5 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 6 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 7 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 8 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 9 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 10 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 11 of 12 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-INP Page 12 of 12 ANT BLE/BT/ 2.4GWIFI/ 5GWIFI Main ANT DIV ANT

APPENDIX C CALIBRATION CERTIFICATES DIPOLE CALIBRATION CERTIFICATES

Report No.: CR231059186-20 Page 1 of 6 APPENDIX B EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom Twin SAM; Type: Twin SAM V5.0; Serial: TP:1470 Report No.: CR231059186-20 Page 2 of 6 Head Left Cheek Setup Photo (0mm) Head Left Tilt Setup Photo (0mm) Report No.: CR231059186-20 Page 3 of 6 Head Right Cheek Setup Photo (0mm) Head Right Tilt Setup Photo (0mm) Report No.: CR231059186-20 Page 4 of 6 Body (Wron)Front Setup Photo (10mm) Body (Wron)Back Setup Photo (10mm) 10mm 10mm Report No.: CR231059186-20 Page 5 of 6 Body Left Setup Photo (10mm) Body Right Setup Photo (10mm) 10mm 10mm Report No.: CR231059186-20 Page 6 of 6 Body Top Setup Photo (10mm) Body Bottom Setup Photo (10mm) 10mm 10mm

SAR TEST REPORT Applicant: LAVA International Limited Address: A-56, Secto r-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India FCC ID: 2ARTX-LEX401 Product Name: Mobile Phone Model Number: LEX401 Series Model: Z34 Standard(s): 47 CFR Part 2(2.1093) The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR231059186-20 Date Of Issue: 2023-12-30 Reviewed By: Karl Gong Title: SAR Engineer Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-20 Page 2 of 75 SAR TEST RESULTSSUMMARY Operation Frequency Bands Highest Reported 1g SAR (W/kg) Limits (W/kg) Head SAR Body SAR (Gap 10mm) GSM 850 0.59 0.28 1.6 PCS 1900 1.09 0.62 LTE Band 5 0.63 0.23 LTE Band 40 0.36 0.27 LTE Band 41 0.57 0.79 WLAN 2.4G 0.27 0.07 WLAN 5.2G 0.21 0.28 WLAN 5.3G 0.18 0.24 WLAN 5.6G 0.24 0.27 Maximum Simultaneous Transmission SAR Items Head SAR Body SAR (Gap 10mm) Hotspot (Gap 10mm) Limits Sum SAR(W/kg) 1.33 1.07 1.07 1.6 SPLSR NA NA NA 0.04 EUT Received Date: 2023/10/13 Tested Date: 2023/12/25~2023/12/28 Tested Result: Pass China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-20 Page 3 of 75 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-20 Page 4 of 75 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 6 1. GENERAL INFORMATION .................................................................................................... 7 1.1 PRODUCT DESCRIPTION FOR DEVICE UNDER TEST (EUT) ............................................................... 7 1.2TEST SPECIFICATION, METHODS AND PROCEDURES ......................................................................... 8 1.3 SAR LIMITS .......................................................................................................................................... 9 1.4 FACILITIES ...................................................................................................................................... 10 2. SAR MEASUREMENTSYSTEM ........................................................................................... 11 3. EQUIPMENT LIST AND CALIBRATION .......................................................................... 18 3.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ....................................................................... 18 4. SAR MEASUREMENT SYSTEM VERIFICATION ........................................................... 19 4.1 LIQUID VERIFICATION ...................................................................................................................... 19 4.2 SYSTEM ACCURACY VERIFICATION ................................................................................................. 22 4.3 SAR SYSTEM VALIDATION DATA ............................................................................................. 23 5. EUT TEST STRATEGY AND METHODOLOGY .............................................................. 30 5.1 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR ......................................... 30 5.2 CHEEK/TOUCH POSITION .................................................................................................................. 31 5.3 EAR/TILT POSITION ........................................................................................................................... 31 5.4 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ................................................ 32 5.5 TEST DISTANCE FOR SAR EVALUATION .......................................................................................... 33 5.6 SAR EVALUATION PROCEDURE ....................................................................................................... 34 6. CONDUCTED OUTPUT POWER MEASUREMENT ........................................................ 35 6.1 TEST PROCEDURE .............................................................................................................................. 35 6.2 DESCRIPTION OF TEST CONFIGURATION ......................................................................................... 36 6.3 MAXIMUM TARGET OUTPUT POWER ............................................................................................... 42 6.4 TEST RESULTS: .................................................................................................................................. 43 7. Standalone SAR test exclusion considerations ....................................................................... 54 ANTENNA DISTANCE TO EDGE ..........................…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: LAVA International Limited Address: A-56, Sector-64, Gautam Buddha Nagar, Noida Uttar Pradesh 201301, India FCC ID: 2ARTX-LEX401 Product Name: Mobile Phone Standard(s): 47 CFR Part 15, Subpart C(15.247) ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above device has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR231059186-00C Date Of Issue: 2023/12/5 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-00C Page 2 of 69 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR231059186-00C Page 3 of 69 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 8 1.2.1 EUT Operation Condition: ............................................................................................................................. 8 1.2.2 Support Equipment List and Details .............................................................................................................. 8 1.2.3 Support Cable List and Details ...................................................................................................................... 8 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 9 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 2. SUMMARY OF TEST RESULTS .......................................................................................... 11 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 12 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 12 3.1.1 Applicable Standard ..................................................................................................................................... 12 3.1.2 EUT Setup.................................................................................................................................................... 13 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 14 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 15 3.2.1 Applicable Standard ..................................................................................................................................... 15 3.2.2 EUT Setup.................................................................................................................................................... 15 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 16 3.2.4 Test Procedure .....................................…

Text truncated - open the document above for the full version.