2ARUAURUNBluetooth Watches

スイッチ 英文 FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Synchronous Data Operating Instructions Bind W atch 1. Download and install App You can set up the watch through the Da Fit app for iOS or Android devices. The steps are shown as follows: Notes: The hardware platform of the equipment system shall meet requirements. 2. Bind process The data is synchronized in real time, and the sports mode can save a piece of sports information shown as follows: Instruction for Use 1. Charging schematic Connect and charge the watch according to the picture. It needs to be charged to activate the watch when it is started for the first time. Operating Instructions HOME key function 3. Main interface operation Swipe the screen to enter different interfac es (interactive interface tile diagram) Function Introduction 1. Icon function introduction Product Parameters 2. Start sports ① Enter sports Click the sports icon Model Uwatch 2S Screen type 1.3-inch color screen 日本语バージョン 16 HOME, long press for three seconds to display the model/version number/ Bluetooth address, and then long press for three seconds to display shutdown/ factory reset/cancel, Normal shutdown, press and hold for three seconds to boot. selec t the sports ty pe > enter capacity 280mAh Battery Charging voltage 5V±0.2V English Version 01 Drop Down Menu Enter the sports menu, Perform a heart you can choose different rate test to check Suitable for measuring blood oxygen levels the sports countdown automatically ② During sports Pause motion: Swipe right to stop and resume Rec overy Exercise: Clic k to resume exercise ③ Stop exercise: Remind whether to end this exercise Select Yes Charging time about 2.5 hours Battery life 7-15days Waterproof 5ATM level Weight of product 43g sports mode your heart rate data for the day. temperature -20°C—45°C Bluetooth version BLE 5.0 Operating Deutsche Version 32 frequency 2402-2480MHz power consumption 0.75dBm Product Max. transmission Return to the previous menu function Version Française 48 iOS 8.0 version or above Andriod 4.4 system or above ① Turn on the Bluetooth Select product Find the bluetooth address on your mobile phone 2. Wear/Install Wear 3. Heart rate test Versión Españ ola 64 ② Find the binding request model: Uwatch 2S on the pull-down list on the home page of the APP complete binding. Replace the strap Correct operation: Scan the QR code below or download the Da Fit app with watch through the mobile app store. Wrong operation: Pair the watch directly with the bluetooth in your mobile phone’s settings. Sleep monitoring pressure measurements are for reference only custom dial camera on your phone 2. Dial function Versione Italiana 80 Note: During the binding proce ss, Da Fit will pro mpt you to enable GPS and Bluetooth, and authorize Da Fit to access GPS on your phon e. After binding the Ap ple phon e, you need to pair the Uwatch 2S watc h with the pho ne's Bluetooth so that the watch can provide various information. 02 Movement information Cleaning and Maintenance Wear the device a finger’s distance from the wrist bone and adjust the tightness of the wristband to a Flip the switch and take out the wristband. It is recommended to wear and maintain according to the following three points: ① Keep the produc t clean; ② Keep the produc t dry; ③ Do not wear it too tight. Do not use household cleaners to clean the watc h, but use the soap free detergent. It is rec ommended to use alcohol to scrub stains that are not easy to remove. Frequently Asked Questions 1. Mobile APP search for the watch failed ① It is recommended to restart Bluetooth after restarting the phone, and then connect. ②Confirm whether the mobile phone system meets Android 4.4 or IOS 8.0 or above. 2. The watch received no alerts, text messages or phone calls ① You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch. ② The iphone needs to be paired with the watch via Bluetooth. (Please check the c olumn of "Sy nchronous Data" for details) ③ Y ou need to keep your watch connected to Bluetooth. 3. Bluetooth is often disconnected ① If the distance between the watch and the mobile phone is too far, the connection effect of more than 10m bluetooth is obviously weakened. ② Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc., will interfere with the bluetooth connec tion signal. ③ Whether the bluetooth func tion of the mobile phone is abnormal. 4. About data backup The data of the watc h is sy …

Text truncated - open the document above for the full version.

Shenzhen Youmi Intelligent Technology Co., Ltd. Agent Authorization Company: Shenzhen Youmi Intelligent Technology Co., Ltd. Address: 406-407 Jinqi Zhigu Building,4/F,1 Tangling Road,Nanshan District, Shenzhen City,China Product Name: Bluetooth Watches Model Number(s): Urun,Uwatch 2S,Uwatch 3S,Urun S,Urun Pro Product Description: Bluetooth Watches We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2020-08-10 Name: wangkun Title: manager Company: Shenzhen Youmi Intelligent Technology Co., Ltd.

Lenbrook Industries Limited. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2020-08-12 Subject; Request for Confidentiality FCC ID: 2ARUAURUN To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: wangkun Title: manager

Declaration Letter We, Shenzhen Youmi Intelligent Technology Co., Ltd. declared that our product Bluetooth Watches item No.: Urun,Uwatch 2S,Uwatch 3S,Urun S,Urun Pro were identical inside, the electrical circuit design, layout, components used and internal wiring, with only difference being model name。 Sincerely your Signature: Name/Title: wangkun / manager Tel. No.: 86-075583220991 E-Mail:[email protected] Company:Shenzhen Youmi Intelligent Technology Co., Ltd. Date:2020-8-13

Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 33 of 43 8 EUT Constructional Details Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 34 of 43 Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 35 of 43 Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 36 of 43

label location label location

UMIDIGI FCC ID:2ARUAURUN IC:26074-URUN UMIDIGI FCC ID:2ARUAURUN IC:26074-URUN UMIDIGI FCC ID:2ARUAURUN IC:26074-URUN UMIDIGI FCC ID:2ARUAURUN IC:26074-URUN UMIDIGI FCC ID:2ARUAURUN IC:26074-URUN 玫瑰金 Rose Gold Urun S Urun Pro 深空灰 冰川白 Icy White 深空灰 深空灰 Uwatch 2S Uwatch 3S 020-200118 R 020-200118 R 020-200118 R 020-200118 R 020-200118 R

Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 37 of 43 Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 38 of 43 Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 39 of 43 Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 40 of 43 Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 41 of 43 Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 42 of 43 Report No: CCISE200708201 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007082 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 43 of 43 -----End of report------

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCISE200708102 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT Applicant: Shenzhen Youmi Intelligent Technology Co., Ltd. Address of Applicant: 406-407 Jinqi Zhigu Building, 4/F, 1 Tangling Road, Nanshan District, Shenzhen City, China Equipment Under Test (EUT) Product Name: Bluetooth Watches Model No.: Urun, Uwatch 2S, Uwatch 3S, Urun S, Urun Pro Trade mark: UMIDIGI FCC ID: 2ARUAURUN Applicable standards: FCC CFR Title 47 Part 15 Subpart B Date of sample receipt: 23 Jul., 2020 Date of Test: 23 Jul., to 10 Aug., 2020 Date of report issued: 11 Aug., 2020 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCISE200708102 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007081 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 2 of 18 2 Version Version No. Date Description 00 11 Aug., 2020 Original Tested by: Date: 11 Aug., 2020 Test Engineer Reviewed by: Date: 11 Aug., 2020 Project Engineer Report No: CCISE200708102 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007081 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 3 of 18 3 Contents Page 1 COVER PAGE ....................................................................................................................................................... 1 2 VERSION ............................................................................................................................................................... 2 3 CONTENTS ........................................................................................................................................................... 3 4 TEST SUMMARY .................................................................................................................................................. 4 5 GENERAL INFORMATION .................................................................................................................................. 5 5.1 CLIENT INFORMATION ...................................................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF E.U.T. ...................................................................................................................................... 5 5.3 TEST MODE AND TEST SAMPLES PLANS ................................................................................................................................ 5 5.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................... 6 5.5 DESCRIPTION OF SUPPORT UNITS ....................................................................................................................................... 6 5.6 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................................................... 6 5.7 DESCRIPTION OF CABLE USED ............................................................................................................................................ 6 5.8 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD ............................................................................................. 6 5.9 LABORATORY FACILITY ...................................................................................................................................................... 6 5.10 LABORATORY LOCATION ............................................................................................................................................... 6 5.11 TEST INSTRUMENTS LIST ............................................................................................................................................... 7 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 6.1 CONDUCTED EMISSION ..................................................................................................................................................... 8 6.2 RADIATED EMISSION ...................................................................................................................................................... 11 7 TEST SETUP PHOTO ........................................................................................................................................ 17 8 EUT CONSTRUCTIONAL DETAILS ...........................................................................................................…

Text truncated - open the document above for the full version.

Report No: CCISE200708102 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007081 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 17 of 18 7 Test Setup Photo Radiated Emission Below 1GHz Above 1GHz Report No: CCISE200708102 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCISE2007081 No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 18 of 18 Conducted Emission 8 EUT Constructional Details Reference to the test report No.: CCISE200708101 ------End of report------